Question so that the migration of the VM using the vSphere API

Similar Questions

• question put on the vSphere iSCSI SAN infrastructure network

  Hi all

  We are a small company with a small virtualized environment (3 ESX servers) and are about to buy an AX-5 SAN EMC (model Ethernet not CF) to implement some of the features of high availability of vSphere. My question is related to the networking of the SAN: we switch dual Cisco 2960 G Gigabit and dual Cisco ASA 5510 firewalls in a redundant configuration.

  I understand that the best practice is to implement iSCSI traffic on a separate from all other traffic LAN switch. However, I do not have the knowledge and experience to determine the real difference than a separate switch would really vs the plan to create a separate VLAN on the switches Cisco dedicated to iSCSI traffic only. I would ensure that the iSCSI traffic has been on a VLAN dedicated Physics (not just a logic) with any other VLAN logical (subinterfaces) on the same VLAN). It is difficult for me to understand how a port gigabit on a VLAN isolated on kit Cisco will perform much poorer than on a dedicated Cisco switch somehow. But then again, I don't know what I don't know...

  The thoughts and the input would be appreciated here: I'm (very) hard not to drop another $6 + in another pair of Cisco switches, at least that this decision will significantly compromised performance iSCSI SAN.

  Enjoy your time,

  Rob

  You have 2 SP each with 2 iSCSI, for example:

  SPA: 10.0.101.1 101 VLANS and VLAN 102 10.0.102.1

  SPB: 10.0.101.2 101 VLANS and VLAN 102 10.0.102.2

  On your ESX to create 2 vSwithes, each with a port vmkernel on an iSCSI network and each with a single physical NIC.

  See also:

  http://www.DG.com/microsites/CLARiiON-support/PDF/300-003-807.PDF

  André

• Workflow for new question now that the Direct link is gone

  Hello

  Im a little confused as to how it should run a basic workflow classification of images that will go in Premiere Pro.

  Raw footage before a rough cut of grade?

  If you rank images after a rough cut by opening SpeedGrade & selection of images, when recording done this car get ingested in Premiere Pro (this is not the case for me)

  What's confusing me is the fact that Premiere Pro & Speedgrade don't seem to work more closely together through the direct link. (understand that maybe it's better for the pros)

  Thanks in advance

  Todd

  They a big chunk of things with us when the version 10.x of 2015.3 came through... Remove the link Direct process where SpeedGrade could open a project file PrPro. What left us with is either using the Lumetri in PrPro Panel or EDL export out of SpeedGrade, or go with an XML export using say Resolve. When the 'official' processes, at least. There is a 3rd party solution it's much easier, faster and elegant... and I will mention that below.

  -L' workspace from the Lumetri in PrPro panel color is pretty cool... for what it can do. It's a mashup of Lightroom UI and colorist quasi tools under the hood. He can do some nice stuff on sequence by sequence. For smaller projects, this is a solution viable even once you know how to use it. Especially if you are using an external control panel, such as the ripple of tangent, which makes the process much faster and much more intuitive to do.

  However, if you need real shot in scenes, multiple secondary on a certain clips, or have 100 clips to the rank, it breaks down or is just too slow to be profitable. I show you how to create a sort-of-especially for the shooting, but it is much slower and less accurate than shot-caller in SpeedGrade or resolution. Stacking of instances of Lumetri or through the "main" clip or on adjustment layers works to get additional secondary & effects, but... also add much and you severely hammer your playback performance.

  -Release of SpeedGrade of PrPro EDL is a release of 'old' style and requires that you export an EDL (edit decision list file) which is then opened by SpeedGrade and choose one of the two methods of work in SpeedGrade. (There are also several fussy settings that must be correct before importing the file into Sg, or it simply rejects the file/process).

  1. The first creates a file 'flattened' within the PrPro and export of this possibility, and then import this file as well as the EDL in Sg. SpeedGrade uses the EDL to align the points 'cut' between the clips to the sequence of return in PrPro, to allow you to grade and knit to dissolved & such. You may not include securities and the lower third of the flattened file. After classification, you export the SpeedGrade file import into PrPro and then use to replace this track 'flattened' in your project, such that your titles and other effects & such on the other tracks are now properly displayed and used.
  2. The second is to export the EDL PrPro, and then import that, in the Official Journal, use the media in Sg Panel to access import clips/various media project and hope that Sg 'sees' them all properly and can automatically "conform" them in the project. You may need to do some in keeping text books (selection and including files).

  -XML to use a different application of ranking, say Resolve, is to export XML from PrPro, collecting the media in a particular folder for easy consistent within the will, openness, import the XML file, then add the media used in the process of the process in line with determination. Once completed the classification, you export a file off to bring in similar to the above listed export EDL file PrPro and replace your chronology of base with this release.

  Colorists figure indicating an ad with clips from 70 to 100 that will be '' similar '' in an XML file will be from 30 minutes to two hours properly "compliant" within the will. This moment is just considered part of the cost of doing business. Literally. Charged at the time, of course. Better editor work done to prepare the trimmed project within the determination, the less time they pay for the wizard to load & preparation of the project for the colorist.

  This above is the official method we have to work. EDL and XML export process is of course still all heavily used in "industrial" situations, where an editor is in a House after and the colorist in another... or really, even within the same House after. They take time and are a bit complicated especially if you work as a one-man show, where you can spend the time to prepare a project to make your own consistent in the application of classification, then finish the "round-trip" PrPro for final assembly work and export.

  For especially small shops, Direct link was... heavenly.

  There is, however, a way to always use the "shape" of the process of link Direct with most of the projects, and it's a very small 3rd party app created by another user of SG and mentioned on this forum. It is discussed and linked to in this thread of Sg forum:

  Project of creation/Speedgrade conversion tool

  What enforcement... open it on the desktop... drag and drop a project of the 10.x PrPro file built 2015.3 or 2015.4 on the application... it automatically saves and increments the file in a new project file, the conversion of 1 a character in header of the project file so that Sg 2015.1 will 'see' the file as a version 9.x and work with it.

  Do your work within the Sg, then save this file when it is done. Drag and drop than even the file on the app and it CONVERTS... new economy/auto-increment of the file, change this ONE 1 return character as well as PrPro 10.x will see the file as native file and work with it without having to convert it into a new project file.

  There were several hundred downloads, and the only problem I've heard of so far is that comps AfterEffects can fritz. Well, there is a way around that, already used by many editors I know who systematically Ae comp work for projects PrPro: rather than including a model of Ae in a sequence, they make the Ae but export work "comp" directly from Ae in the codec they use for their project, and then replace the original item by this export of Ae on the sequence itself. Typically, it plays easier back and exports with fewer potential problems anyway. More... If you want to redo the comp in Ae, simply open this model even once, your new work and another export or replacement operation.

  With the panels of the ripple & elements, there are much more of my little projects which may remain within PrPro and where Lumetri works very well. However... a marriage? UH... No. All the shot-matching and secondary and stacked effects and such that I'm used to using in Sg can be done in Lumetri... but much slower to accomplish, and by using stacked Lumetri which slow down playback visibly.

  So... I use the two Lumetri in PrPro and if necessary, novel of Patrick and delicious little program also operate at the breast of the Sg without EDL/XML and flattening/export/consistent/round-tripping in this way much longer.

  Neil

• Question so that the marking of a PDF document

  Dear all,

  I face an incorporation question when I Tag a particular PDF of the police, I mostly deal with documents containing the equation, these equations are created in the 3B2 software, when the document is created the equation looks like below, which as we can is formatted way.

  

  When the PDF file is added manually or through a plug in the resulting output is get is as shown below:

  

  Please give in your comments, or help me solve the problem...

  The respect of

  Amith Sai

  Just add adobe.com to my ID...

• How did you will have picked up a question when previewing the course

  Hello

  Right now I have a few question slides that work as expected when you use the drive of Captivate or preview in a browser.   I realized not through an LMS at the moment. However, when I return to the question I answered, using the table of contents, I am unable to select answers or click on submit. The load screen and audio playback, but I can not choose an answer and click on submit. I put the property of quiz to allow attempts to infinity, but that he did not set.  Can anyone offer advice?  Thanks in advance for your help.

  Hello

  You will need to understand how questionnaires are designed. There are attempts to Quiz level both on the issue. Attempts at the level of the question must be exhausted while remaining on the slide, with the exception of the remediation work flow where you can push the user in a content slide and back to the question slide. In other words, when you use normal back movement, the question will be blocked, because you left the slide and then the number of attempts at the level of the issue is sold out.

  You also attempts to Quiz level. If you allow more then one, you must use the button on the slide to Score: it will erase all the answers and the user can restart a new attempt. All system variable quizzes are reset to zero.

  These blog posts have more information:

  http://blog.lilybiri.com/question-question-slides-in-Captivate

  http://blog.lilybiri.com/question-question-slides-part-2

  Lilybiri

• The REST api is supported by Eloqua?

  Hi guys,.

  I know that this seems to be an odd question at first, but bear with me.

  Recently, I created a few features to read certain Eloqua components.

  Then I came across some problems with th! api e REST and contacted support, at one point, they reported that the REST api was not officially taken in charge, is this true?

  Because using SOAP is no option for our programming environment and the major PART is just for the massif of the small amount of calls, we have to do.

  Hope you can give me a permission in this respect, because we do not want to create stuff on top of the api REST when we can never support on it.

  Through the REST API, you can do many things, not all supported.  This page lists the supported operations: management of Eloqua API use cases

• External table Oracle via the Tables API

  Hello world

  I did experiment with the Oracle NoSQL database recently and I became a bit stuck with the new API of Tables. I have so far successfully of the external tables on the data entered using storage techniques 'vanilla' KV and avro (using generic and specific links) scheme, but create API Tables seems to be another matter entirely.

  My question arises in the trainer interface, which has a KeyValueVersion and a KVStore. I can't translate a KeyValueVersion created with the API of Tables in a primary key for recovery (since I don't know what the key generated by the API actually looks like to!) or map it on an avro scheme. The problem seems to be that the Tables API writes data in some format that can be easily translated into a string or an integer (releases from external table lines due to unknown characters if I am trying to retrieve all the values in the database to see what it looks like to), and try to map it to an AVRO map results in the error message 'the data are not as AVRO'.

  Scenario:

  I created a very simple table in the administration tool KV, which consists of a column personId (integer) that is PK, firstName, lastName, emailAddr (all channels) and enter 5 rows with success. What I want to do is to create an external table called person that returns just those 5 values (and brand new I add to the table of course). This means that I have to first understand what the parentKey value must be defined in the .dat file and how to take this key and it becomes a primary key for the recovery of the line.

  Faithful old Google could not find information on how to do this (he was only a thread similar to this with the answer "we'll add it soon"), so I hope that someone here managed to do!

  Thank you

  Richard

  Hi Richard

  I understand the issue you are facing. In the current version (12.1.3.0.9) the external tables feature only works with records of K/V not with the Table model, however, in the next version (which us will very soon be GA) we will support integration of external tables with the data of Table model as well. Please make sure that you have signed up for the announcement of release so that we can inform you of the release. I apologize for the inconvenience, he did to you.

  Best

  Anuj

  Sign up for announcements of NoSQL database , so we can warn you versions futures and other updates from the product of NoSQL database

• Of the SOAP API is obsolete?

  It is said in the docs that the old APIs are deprecated, when - what will happen?

  I ask because all customers RELY on that for orders and customers sent to external systems.

  As much as I know I can't access the V3 API from the outside of the system, but then, what's the plan here?

  Hi Thomas,

  We will not depreciate the SOAP API providing a method to authenticate from external services / sites to OTHER APIs. In addition, once we have published the authentication method, we will seek to prove a window of six-month transition before the phase-out of the old APIs.

  Cristinel

• The implementation of RunProgramInGuest of VIX using the vSphere Web Services SDK?

  Hello

  A few months ago I developed a python API for VIX, but as I needed to extend the functionality of this API (performance monitoring, host management, etc.) I moved the vSphere Web Services SDK.

  However, I did find a way to implement some comments VIX as LoginInGuest or RunProgramInGuest functions using only the Web Services SDK.

  Is there a way to do this? I thought that each function VIX has been translated internally to a soap request, but now I think that is not the case for these functions of comments, if so, how VIX inwardly does them?

  Thanks for your help!

  Sebastian Tello

  Currently, if you must implement specific comments operations running a specific script/application or by connecting to a guest, you must use the VIX API. This feature is not currently exposed in the vSphere API, you will need to use a combination of both, until VMware them integrates in the vSphere API core. For more details on the future of VIX, take a look at this blog post - http://www.virtuallyghetto.com/2010/11/what-is-vmware-vix-api-and-its-future.html

• Running the command by using VI SDK API esxupdate

  Hi all

  I need to install a package on an ESX Server. Right now I use the command esxupdate with update on the esx console option, I want to do this remotely without SSHing into the machine. Is there some api in VI SDK for this or there is another VMware SDK/API I should be looking into?

  Thank you.

  vCLI uses the vSphere SDK for Perl... it's the Perl bindings/stubs to the vSphere API and/or VI API

  vSphere 4.x =

  VI = 3.x

  So yes, there are some methods that handle the updates/etc, look at the source code of vihostupdate which is just the Perl script and you'll see what methods are used.

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• I NEED TO KNOW WHY THE _ THERE IS NO COMPATIBILITY FOR WINDOWS XP MODE 7 HOME PREMIUM EDITION. AND WHY HAVE WE NOT "WAGES" TO ASK FUNDAMENTAL QUESTIONS AFTER THAT WE PAID HUNDREDS OF DOLLARS FOR THE SOFTWARE?

  I PAID A LOT FOR NEW WINDOWS IN NOVEMBER LAST, AND I ARE NOT ELIGIBLE FREE SUPPORT?  THAT BREATH!  TEXAS INSTRUMENTS GOT GREEDY IN THE 1980S AND TOYOTA IS GOURMAND RECENTLY, NOW THEY'RE LOOKING AT BANKRUPTCY!

  SO MY QUESTION IS IS THERE A DEMO FOR LATER VERSIONS OF WINDOWS 7? BECAUSE I NEED OBVIOUSLY BUT XP COMPATIBILITY MODE I WANT TO BE 100% CERTAIN THAT THIS WILL FIX THE PROBLEM OF MY GAMES CRASHING THE SYSTEM WHICH REQUIRES A REBOOT.

  FOR MICROSOFT REAL, JUST HOW GREEDY YOU NEED BE?

  I ARE NOT ELIGIBLE FREE SUPPORT?

  If you buy retail (non OEM) then Microsoft generally taking care for the first two free incidents. Please consult the documentation provided with your copy of Windows 7.

  IS THERE A DEMO FOR LATER VERSIONS OF WINDOWS 7?

  I think that the only DEMO of Windows 7 available currently is approved specifically for the IT professionals. The demo lasts 90 days, but I "think" that Microsoft recommends that you be part of a company to participate. I don't know how they would feel if the average end user participated in the demonstration program.

  I NEED OBVIOUSLY BUT XP COMPATIBILITY MODE I WANT TO BE 100% CERTAIN THAT THIS WILL FIX THE PROBLEM OF MY GAMES CRASH THE SYSTEM

  I don't 'think' the XP COMPATIBILITY MODE in Windows 7 will help you a lot. I "think" it uses Para-virtualization, which is unfortunately too slow for almost all games. I was able to run some software in a virtualized copy of Win XP, but the software was not a lot of resources like computer games is.

  I am surprised that your games break in Windows 7. I run 32 Bit Win XP Pro SP3 here at home, but I have recently built a machine Windows 7 Home Premium 64-bit with 4 GB of RAM for my mother and it seems to work. My mother runs a Sims 3 and Sims 1 without problems, but Sims 2 gave here a few rendering problems that I don't think are associated with Windows 7.

  I recommend that players stick with Windows 7. Although there are other available operating systems, Windows 7 is probably the best operating system currently available to players. High compatibility and DirectX 10 + Support + 4 GB of RAM (or more) supported in Windows 7 Home Premium 64 Bit make Windows 7 a good set of OS. Trust the creators of the XBox of world-class, Super Sidewinder Joystick and high-speed Direct X technology.

  BTW: Now you can upgrade to Windows 7 Home Premium to Windows 7 Pro for only $ 90

  http://store.Microsoft.com/Microsoft/Windows-Anytime-Upgrade-Windows-7-Home-Premium-to-professional/product/C562285E

  Probably upgrade will not make your game better, but it will give you the possibility to have a safer computer.

  Final note:

  I wish Microsoft could release a Version of Visual Studio 2010 Standard... Who doesn't have my feathers ruffled a little because I can't see paying $800 for a compiler...

• someone is using my email address to send emais. I tried to reset my password but I am not able to. He says that the answer to my secret question does not.

  someone is using my email address to send emais. I tried to reset my password but I am not able to. He says that the answer to my secret question does not. I know I'm getting the correct ansewer. Help, please.

  Hi, Catherine.

  You'd better post in the Windows Live Solution Center-Hotmail like that is dedicated to Windows Live Hotmail.

  If you have not implemented alternative methods to check your Hotmail credentials, I suggest do it after your account is returned.  For more information, see Security Hotmail to protect and recover your account .

  Good luck!

• Cache question? My Cache in Bridge is full, how do I do that the purge? Will I lose anything as my thumbnail or photo files that are still on my computer

  Cache question? My Cache in Bridge is full, how do I do that the purge? Will I lose anything as my thumbnail or photo files that are still on my computer?

  Hello

  You can purge the cache of the following option

  Preferences-> Cache-> purge all the Cache now

  You will not loose original photos to the computer. It will remove created bridge Cache of thumbnails / images.

  You can also set no.. a value of days to automatically purge older option preferences-> Cache cache.

  Please let me know if you have any additional questions.

  Kind regards

  Anil

  Adobe Bridge team

• "" Is probably the dumbest question you've ever had, but I am new to Adobe stock, more dollar club, and I guess that since there is no button to say "Download Image" that the "license and save" meant by download. I did it, it took a picture

  "" Is probably the dumbest question you've ever had, but I am new to Adobe stock, more dollar club, and I guess that since there is no button to say "Download Image" that the "license and save" meant by download. I did, it took a picture off my amount allocated, but I did not download. I followed the indications of support for downloading questions and all done to take another credit away from me and I still haven't a download. What Miss me?

  If you check your history of license, you will see the images that you have acquired a license.

  I added a credit to your account in order to replace the image duplicated under license by mistake.

  

  Kind regards

  Bev

• CC Desktop App for the Government concerning: the end user administrator came back with 2 questions. Since the Bank has its workstations (computers) in a network segments separated physically (Internet and Intranet), are they correctly assuming that:

  Desktop adobe Creative Cloud for government applications :end user administrator came back with 2 questions. Since the Bank has its workstations (computers) in a network segments separated physically (Internet and Intranet), are they correctly assuming that:

  1. They will be able to download and activate the installation package through CC e package on Internet workstation and transfer with a USB flash drive on a workstation Intranet , hence they can deploy desktop applications to end-user desktops CC?
  2. The deployment of renewal process will work the same as above?

  Government accounts https://forums.adobe.com/thread/1483694 can help

  or

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  or

  http://forums.Adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  Creator of Enterprise Cloud https://forums.adobe.com/thread/1489872 License Restrictions