How do to identify the documents called "models of library" using the RESTful API?
How do to identify the documents called "models of library" using the RESTful API? Furthermore, what constitutes a document to be a "model of library"? I see nothing in the libraryDocuments RESTful documentation that describes this type of document, such as presented on the tab 'Manage' my developer account. Please see the screenshot below. There is a model of Document named "[DEMO ONLY] Test model" listed under "Library Templates" and I try to figure out which classifies that document to be included this way and how does produce a similar announcement by using the RESTful API.
Thank you!
Hello
You can connect to access library models using the REST API, use 'GET /libraryDocuments' allowing to recover documents in library for a user. Models are created in the account of EchoSign, which later are accessible via the REST method mentioned above.
Jat
Tags: Adobe Sign
Similar Questions
-
Qosmio G20: How can I identify the DVD Recovery CD?
I work in a society where more is Toshiba Laptops. Unfortunately, all DVD-recovery are in the same place, and I don't know how can I identify the one for my laptop.
I have a Qosmio G20.
Any ideas?
Thanks in advance!Hello
> I don't know how can I identify the one for my laptop
Each original Toshiba Recovery CD is labeled.
There is a number and the model of laptop that is supported.You can compare the number on the CD with the number at the bottom of the laptop.
All that s
-
How can I identify the date when the last system restore was used to roll back the pc?
Original title: how System Restore last used
As the title suggests, how can I identify the date when the last system restore was used to roll back the pc?
I can remove all restore points. I've used twice now the beta off Defender & he assures me
the pc is clean Virgin.I have just got rid of a Trojan dropper & a Win 32/AmmyyAdmin. -(whatever it was!)
I now seem to have acquired Windows Powershell along the way, gawd knows where!
He was not here a few days ago and I don't have any idea where it is!
What is it and should I be worried?
Thank you
Hello
You can check this link:
How to restore Windows XP to a previous state
-
How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate? I use Windows Vista backup program (Service Pack 2), and I need to do backups plus two from other computers on the same external hard drive. To do this, I think I would need to identify each backup file separate I know which file to specify if I need to do a restore.
How can I accomplish this? The program does not seem to give me the ability to specify a file to which to write the backup during a given session files. In addition, I do not understand why I can not see the file name in Windows Explorer - my files options are defined to be able to view hidden and system. Would be grateful for any help you can provide, tonight if possible. Best regards, Oliver for Norm
Hello
See this link:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files
-
How can I add a Document template to my library of templates with forms already implemented?
How can I add a Document template to my library of templates with forms already implemented?
I use the same contract repeatedly to different customers and need to set up the custom fields every time which is a total pain. Also, there is no option 'Add a Document Template' in my account anywhere, where the tutorials do not say that it should be or anywhere else.
How can I fix it?
BenHello Ben,
You can go to the dashboard-> additional functions and click on "Add document to the library", and then can download the form inside. If your document already contains form fields, they would automatically get detected. Otherwise, you can also add form fields in EchoSign too.
Kind regards
-Usman
-
How to configure Hostname of the node with the REST API?
I tried the value of hostname of the virtual machine when I deploy an application, but were unsuccessful. The application consists of all the operating system - there is no installed service but an example here that I used when I deployed the application. It is based on the release of the REST API "node info": for the particular deployment profile.
{
'node': [{}
"name': 'VM1."
"properties": [{}
"hostname": "joe".
}],
["nodeComponent":]
}]
}
But when you use this application I get the error message: "the node 'VM1' does not exist in the current 'deployment profile'. ' even if 'VM1' is the only node in the deployment profile. I tried other variations and still get the same error message.
Does anyone have suggestions for how I can configure the hostname of the node when you deploy the application? Thank you.
Apparently, the REST API for planning a deployment is designed after characteristic GUI Application Director "rapid deployment". Rapid deployment does not allow the substitution of properties of node as hostname. Idea being the deployment profile once defined and prepared, each individual call of it must change some subset of the properties of the component. We can always create several profiles of deployment to account for changes in node.
Nevertheless, it seems that property of node specifications would help your situation... so that your comments reached the product team.
Thank you rags
This posting is provided as is and confers no rights.
-
New tab page to view the 15 links. Now it just shows 3. How to bring back the rest?
You can zoom the subject: newtab page to resize tiles and tiles most enter on the page.
- View > Zoom > Zoom out; CTRL and -
'Zoom text only' should not have a tick
This will affect all elements of the page, text so get more smaller institutions.
Make sure that a tab with the subject: newtab page is open when you change the zoom of the page.
Toggle the pref browser.newtab.preload false on the topic: config page in case of problems with remembering the zoom on the page of the on: newtab page.You can open the topic: config page via the address bar.
You can accept the warning and click on "I'll be careful" to continue.See also:
- New tab tools: https://addons.mozilla.org/firefox/addon/new-tab-tools/
- View > Zoom > Zoom out; CTRL and -
-
I ran a scan of microsoft security and it indicates that a virus has been partially deleted. How can I remove the rest or what step I need to take the next
Hi Lucie,.Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guideIt contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.Brian -
How can I get the rest of this virus off the coast? Ive found a bunch and them came down until I can get online but I can 't get to work stations or other programs. I have to run in safe mode to do anything properly. This is where I removed the malware and other viruses but I'm not sure it fixed stuff I need in normal mode.
How can I get the rest of this virus off the coast? Ive found a bunch and them came down until I can get online but I can 't get to work stations or other programs. I have to run in safe mode to do anything properly. This is where I removed the malware and other viruses but I'm not sure it fixed stuff I need in normal mode.
Just to add to the answer above, once you have completed the scan with Malwarebytes in SafeMode with network, restart the computer in normal mode, look for the Malwarebytes updates, then perform another analysis.
-
How can I remove the rest of the damaged files that Windows Resource Protection could not?
How can I remove the rest of my corrupted files that Windows Resource Protection did not delete? It offers no suggestions? If he deleted some, why can't this? I did the scan twice, but it says this... CBS. Newspaper windir/Logs/CBS/CBS.log for more details... I don't know how to access, also said the damaged drive was C / windows / System 32/config/software/log is corrupted and unreadable. Hope that there is a way to solve this problem... Thank you
Hello
Try the following and see if it helps.
I suggest you perform a disk check and check if it helps.
See the following steps:
a. open the computer by clicking the Start button, click computer.
b. click the drive you want to check, and then click Properties.
c. click on the Tools tab and then, under error-checking, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
d. to automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.
e. to carry out a thorough, check select search for and attempt recovery of bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.
f. to check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
g. click on start.
Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
Note: Make sure also that you have disconnected all external devices except the keyboard and mouse.
Note: If you are always faced with the question then I suggest you to upgrade on the spot and check if it helps.
How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2255099
Note: Before you perform the upgrade on the spot, I would recommend you to back your files using windows backup. -
I tried to install 300 photos on a USB I installed 170 photos and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.
Hi BrendaMay,
Take a look at this link http://social.technet.microsoft.com/Forums/en/itprovistasetup/thread/bf17ed76-5164-4380-9140-16bd74e7c8c7 and check if the post by Ira Horowitz to Monday, December 24, 2007 15:04 is a good one to try.
Kind regards
SAP
-
I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.
Hello BrendaMay,
· What exactly do you mean by saying that you install photos?
· You try to copy photos from your computer to the USB key?
Try to format the hard disk to the NTFS Format USB and check if you can copy the photos.
If does not work, try to format to FAT32.
1. type devicemgmt.msc in the Vista Start menu or in the Run dialog box.2 expand disk drives, right-click on your USB key that you want to format it in NTFS file system, and then select Properties.
3. on the Policy tab, select optimize for performance option. Click OK and return to my computer.
4. right click on your key USB. Select Format.
5. Select NTFS from the drop-down list (you can also select FAT32).
6. click on apply to format your drive to NTFS.
Note: The pilot of formatting will destroy all data on the disk.
If this does not work, try to create a new folder in the drive, and then copy the photos on this folder.
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.
-
I'm trying to use the API to get the signature of all the users of the system fields. I can see this information in the web browser if I go to settings-> user management-> and selecting the user.
I would like to know if there is a way to get the information General information (Signature fields) using the API.
Thank you!
Hi Sai,
The REST API exposes the user records (see the following document); However, signature fields are not included. We need to work on this addition to the API (in a later version), but the option is currently not available.
Please let me know if you have any questions or would like more information.
Thank you
Fred
-
How to get assets via the REST API (Webcenter Sites)
Hello world
I need to get assets via the REST API using Javascript, but I don't know how to open a session. Can someone explain to me how do?
I would really appreciate it.
I also followed this guide Oracle Webcenter REST API permission | Stories of official codification but does not work.
Best regards!
Hello rvillamarin,
Take a look at https://docs.oracle.com/cd/E29542_01/doc.1111/e29634/wemsecurity.htm#WBCSD306. With this, you should be able to get a ticket, to pass at the request of the REST.
Kind regards
Stephan.
-
How to set the time to preview using the REST Api of the assembler
Hi all
Using the REST API of the assembler, I can't feature "set the time to preview" to trigger a specific model that fires only at a specific time
This is the format that I'm trying:
http://xxxx:8006 / assembler/json/pages/home? Endeca_Time = 2020-04 - 05 T 14:30
I use the correct format? This is the url parameter listed in the documentation of the Assembly
Thank you
It turns out that the documentation is wrong
- In assembler.properties (service\WEB-INF) of your REST API, you must define
- User.State.Ref = previewUserState
- You use Endeca_date and not Endeca_Time in the URL (documentation is wrong)
- Coding varies from a browser (you may need to URL encode the date in Firefox)
Example:
http://xxxx:8006 / assembler/json/pages/home? Endeca_date = 2020-01 - 11 T 18:00
The date format is: YYYY-MM-dd' you HH: mm
- In assembler.properties (service\WEB-INF) of your REST API, you must define
Maybe you are looking for
-
The email I received from Firefox:Before your question Firefox Help (links in gmail go to the wrong address)According to our support community, you have to confirm theaccount that you just created by clicking on the link below: I had to post the link
-
Hello, today I installed a new copy of windows 7, and at the beginning everything was fine. I installed everythink I need, and then I see that the fn buttons does not work. I were utility to install the three vaio but the fn buttons still does not. S
-
Hello world I use windows server 2003, enterprise edition 64-bit. I changed the hard drive of one single processor to others. and now I face problem of activation. I'm not able to enter my old key to activate it. and its asking me to connect on inter
-
I'm having problems with my windows fax viewer: when receiving attachments by peaks of jpg email etc form family friends when I download then discovers through the viewer of fax Win if I click on the button forward or backward, I found more than 100
-
strange thing after disabling network under ManageConnection and range to lose
Hi, I noticed a strange thing and I was wondering if anyone of you know maybe why. Here's the thing: I am connected to the server using Socket. all the 5 sec, I'm sending to the server a frame just to check if I am always connected. If I can't send i