Device drive hard outside conectado don't con usb no works,.

Similar Questions

• Get "there is no disk in the drive has it please don't insert a diskette into the drive device drive hard/dr3/dr4 etc etc" error after installing the Bitdefender program.

  There is no disc in the drive please insert a disk into the drive device drive hard/dr3/dr4 etc etc.

  Original title: coordinator.exe no disc

  I got this message after installing BitDefender antivirus.
  It turned out to be partly because of WinPatrol - who had not been uninstalled.
  And the program uninstal delete his entry autostart nor its program file.
  Which has supported, manually, the end of the message...
  But I guess that's not specific to WinPatrol, which is an excellent monitor if it is not in conflict with the antivirus.  (It worked well alongside Avast.)

• drive hard formatiado como memoria y conectado don't con useful usb, computadora no reconose el device, peripheral unknown port of codigo 43 usb

  El hard drive are model mja2160bh con SER. Nr. k49nta12tueh're laptpt toshiba, works probado en otra computadora UN

  Look at the entire Web page

  

  Look in the lower left corner of the page.

  

  Where we see English, click on it.

  Then select your language from the list.

  

  OR

  http://support.Microsoft.com/common/international.aspx

• How would I go about installing device driver USB mobile Apple who is missing after upgrading to the latest version of iTunes? I use Windows 10. Thank you.

  There are some days that I installed the latest version of iTunes. I've also updated my iPad 2 and iPhone 4 iOs 9.3 sec. Now I can not activate the iPad and iTunes on my PC does not show the iPad, or iPhone. I've gathered that the Apple mobile device driver is missing, but don't know how to install it. Any help?

  Maybe isn't a driver problem.

  Help here > How to restart the Service Apple Mobile Device (AMDS) on Windows

• Trying to connect Samsung device but he repeats to me it's installing the software device driver.

  So whenever I try to connect my Samsung Galaxy S4 active on my Windows Vista computer all it say is that is install the driver software of device, then it will say software successfully installed. So I'll start button, and then the computer so I can get the files on my phone, but nothing is there, then a few minutes later in the corner he'll say it's install software device driver, again. I don't know what the problem is. My camera says it is USB MTP, so that I can transfer files, but it does not work. My device used to knit then I updated my computer, it has been for most of the security stuff, I don't know if maybe that has something to do with it. Help, please. Thank you.

  Hello

  Try the solution listed in this thread of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/problems-connecting-Samsung-Galaxy-S4-to-Windows-7/bb1a1d2d-c30e-4AFA-93e2-3364b86692b5

  Have you tried to download and install the drivers yourself, then plug in the usb cable?

• somehow I have scratched my order of device driver / & audio volume from my hard drive and now I have no sound. What have I done?

  somehow I have scratched my order of device driver / & audio volume from my hard drive and now I have no sound. What have I done?

  Fujitsu lifebook

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. What is the exact model of your computer?

  2. what exactly happens when you try to play sounds on the computer?

  If you are not able to hear sound on the computer, then I suggest you to try the steps mentioned in the link and check if this may help.

  No sound in Windows: http://windows.microsoft.com/en-US/windows/no-sound-help#no-sound=windows-xp&v1h=win8tab2&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Select the appropriate model and try to install the sound drivers from here: http://www.fujitsu-pc-asia.com/driversupport/selectioninterface/selection.html

  Please follow these recommended steps and post if you still experience the problem.

• I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  Use Time Machine or a clone to copy to the outside.

  Time Machine Basics

  Basics of Time Machine (2)

  Time Machine Basics (video)

  Time Machine FAQ

  First Time Machine backup

  Clone - Carbon Copy clone          (Often recommended because it has more features than others)

  Clone-data backup

  Clone-Deja Vu

  Clone - SuperDuper

  Clone - Synk

  Clone - 6 tested Applications Software

  Time Machine from the Clones and Archives

  Commonly used backup methods

• How can I use my drive hard thunderbolt from 8 TB to backup all my wireless devices?

  How can I configure my drive hard thunderbolt from 8 TB to back up all my devices using a Wi - Fi connection?

  What you might hope better would be to use a Thunderbolt-to-Ethernet adapter to connect to the router, but even if it works, it would be like a fire (Thunderbolt) connection to a water hose (Ethernet) is launching... and expect to get more water on the hose... more, the best that can be done without wire will be about half the speed of the Ethernet network.

  Sorry, this is no sense... a Thunderbolt drive is designed to connect directly to a Thunderbolt port on a computer, or in a Garland with other devices Thunderbolt.

  In other words, as soon as you break the chain of connection Thunderbolt, the speed drops to Ethernet or even low speed wireless.

• Drive HARD Ext cant allocated, it is said: the request could not be performed because of an i/o device error

  Hello world. IM new here.
  I would like to ask questions about the allocation of disk

  My drive HARD Ext (WD my passport) will not appear. so, I check in computer management, and my disk not allocated
  When I try to assigned by the following method
  It is said: the request could not be performed because of an i/o device error

  Please... is if everyone there a solution to this issue?

  I tried to update the firmware, WD Essential, WD utilities

  but this does not solve the problem...
  When I try to checkdisk in promptcomand but I don't know how to put it, because the drive isn't there...

  Please help me...

  Hello

  This error may be coming because of unavailable storage required for the motherboard drivers. You can follow the steps one by one, mentioned below and check if that helps.

  Method 1: Uninstall, and then reconnect the external hard drive. This method solves the problems where the currently loaded USB driver has become corrupt or unstable.

  1. Click Start, type Device Manager in the box Search
  2. Click Device Manager in the returned list.
  3. Click disk drives in the list of hardware
  4. Right click on the USB external hard drive with the question and click Uninstall.
  5. Once the hard drive is uninstalled, disconnect the USB cable.
  6. Wait 1 minute and then reconnect the USB cable. The driver should load automatically
  7. Look for the USB key in Windows Explorer

  Note: Connection of your USB external hard drive to a non powered USB hub can cause a lack of sufficient power to operate the external drive. Instead, plug it directly into your computer.

  Method 2: Install the latest Windows updates.

  This method will install the latest drivers for your external hard drive USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  If your problem still exists, go to method 3.

  Method 3: Reinstall the USB controllers. This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  1. Click Start, type device in the area Manager Search , and then click Device Manager.
  2. Expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.
  3. When finished, restart your computer. Your USB controllers will automatically install.

  If your problem persists, go to method 4.

  Method 4: Disable USB selective suspend framework. This method prevents your power off USB external drive.

  1. Click the Start button, type power management in the search box, and then click choose a power plan.
  2. Next to your currently selected plan, click Change Plan settings.
  3. Click change advanced power settings.
  4. Click in the box USBsettings, and then expand the USB selective suspend settings.
  5. Click on the area, and then click the menu drop down and select disabled.
  6. If you use a laptop, click the cell, and then click the menu drop down and select disabled.
  7. Click apply, and then click OK.

  If this does not resolve your issue, go to method 5.

  Method 5: Install the latest drivers for your motherboard chipset. This method updates the chipset of your motherboard drivers, so that your computer will use your external USB hard drive.

  1. See the documentation for your computer that will contain the name of the manufacturer of the motherboard.
  2. Visit your computer manufacturer's support Web site. For a list of the computer manufacturers support sites, visit: http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers
     (http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers)
  3. Go to their Web site to find the appropriate drivers for your motherboard. For assistance, contact the manufacturer of your computer.

  Please post with the State of the question.

• Not found boot device. Hard drive (3F0)

  Hello

  I have a HP Pavilion 15 laptop n203ed 8 64-bit windows-based and have updated my bios.

  About a month ago, I bought an SSD and improved my HARD drive, it worked fine until yesterday, I started getting the error message "not found boot device. Hard drive (3F0) '. I get this error message whenever I restart the laptop, but when I load the bios, change nothing and then tap on save and exit suddenly it restarts again the error disappeared and everything goes back to normal. Until this happens again in a few hours. I've had 4 times now.

  My question: is this a hardware problem or software, I would return the SSD? or could it be something else?

  Thanks in advance.

  Found answer here https://www.youtube.com/watch?v=j3wkwYB75bg

• To install the device driver required to access your hard drive, insert the installation media containing the driver files, then click OK."

  I'm trying to move from xp to windows 7. I spent all the requirement but she says to install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK. "what should I do? Where can I find the driver?

  Guess he would seek software/drivers for the chipset MB

  & sata/IDE controller software. Get the MB hardware specifications, go to the mfg

  Web site & download the software and drivers. If intel, download the chipset installation

  utility & install it 1. The other would be the SATA or / and drivers for the MB IDE

  controllers, 'Matrix Storage console' would be the one, also chk for desktop

  Internet downloads, amd, and other brand materials would be substantially the same.

• I have vista 32-bit, he sees not my new drive hard hitachi, in device manager it shows that it works correctly?

  Why my expoler does not see my new drive hard when it is in the device as o.k. Manager.

  Look for the drive in computer management, it may need to assign a drive letter.

  Change, add, or remove a drive letter
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

• Windows don't con not load drivers for 6 to 4 adaptorCode 31__Tun mimiport con adaptor\device not stsrt Code 10

  CDRom does not work and the DVD player does not work. Have you checked the two drivers are up-to-date.

  Hello

  For the 6to4 card number, which is separate from the issue of the CD/DVD.

  Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore errors if you wish and on some
  computers, it will always be there but no problem to be expected.

  On a Windows Vista-based computer or on a computer, Windows Server 2008, the card Microsoft ISATAP
  appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520

  ==============================================

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  If necessary:

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive.

  Original title: USB problem

  I use windows 7 as operating system. I have problem when I insert USB devices as pan tie drive, mobile, reader of cards ect. USB port of my PC. The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive. so please suggest me what I can do?

  Hello

  Start Windows Explorer, and then see if there is a drive letter assigned for access to the
  drive. If this is not the case, check if the disc is shown in disk management.

  1. Open Computer Management by clicking on the button start , by clicking on Control Panel, system and security, clicking Administrative Tools and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. In the left pane, under storage, click Disk Management.

  If there has made a right click option - assign a drive letter for you can use Windows
  Explorer to copy files.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• No to encuentra UN device driver para the unidad of CD o DVD. If cuenta con algun disquet. CD, dvd o unidad usb that can enclosed driver, insertelo ahora el flash

  Hola Amigos y amigas

  Al Try instalar windows 7 profesional me sale el siguiente error ' no. is encuentra UN device driver para the unidad of CD o DVD.» If cuenta con algun disquet. "CD, dvd o unidad flash usb that can enclosed driver, ahora insertelo el"
  El message sell me Instalar Ahora click hacer luego.
  Datos del computador
  MI unidad lectora dvd are Sata LG placa madre are intel DG31PR (B) Y EL DISCO DURO ES SEAGATE OF 500 GB memoria KINGSTON 2 GB
  Gracias por su ayuda
  Unfortunately, this forum is for English only. Click on English in the lower left corner of this page to select your regional language and you can post it in the regional language you.
  Desafortunadamente, este foro're para el idioma Inglés only. Haga click in English in the lower izquierda esquina of this page para seleccionar el idioma regional there is public the regional lengua en.