Device of UCS - FI secondary/subordinate getting not saved

Similar Questions

• File of custom workflow (wdl) not getting not saved in WorkflowProcessManager

  Hi all

  We strive to create a new workflow, and run it through a program.

  We add a custom workflow file (wdl). We have different environments in place.

  VAC is allowed only in smaller environments, where wdl file is generated and is added as part of the source (translated into the module version config.jar).

  Is some environments the new world digital library file gets saved in WorkflowProcessManager and is accessible through programs.

  But, in some servers, its not fits. It will be great, if you can provide guidance on this.

  The world digital library file created via ACC in rendering available in Publisher in the following path:

  / ATG/Registry/Data/epubworkflows/Acme flow/acme.wdl

  /Acme flow/acme.wdl get extra/atg/registry/EPubWorkflows /

  But, 'look at the workflow' of /atg/epub/workflow/process/WorkflowProcessManager / is not displayed '/acme flow/acme.wdl.

  Also when the process is called, it throws the below error: (there is no error not related to the file of world digital library of loading at startup of the server)

  atg.workflow.WorkflowException: the project named /acme flow/acme.wdl type is not valid. Check your configuration to find errors.

  at atg.epub.project.ProcessHomeMethods.setProcessAcl(ProcessHomeMethods.java:532)

  at atg.epub.project.ProcessHomeMethods.initializeProcess(ProcessHomeMethods.java:428)

  at atg.epub.project.ProcessHomeMethods.initializeProcess(ProcessHomeMethods.java:383)

  at atg.epub.project.ProcessHomeMethods.initializeProcessWithGlobalWorkflow(ProcessHomeMethods.java:364)

  at atg.epub.project._ProcessHome_Impl.initializeProcessWithGlobalWorkflow(_ProcessHome_Impl.java:60)

  at atg.epub.project._ProcessHome_ReposImpl.initializeProcessWithGlobalWorkflow(_ProcessHome_ReposImpl.java:3)

  at atg.epub.project.ProcessHomeMethods.createProcessForImport(ProcessHomeMethods.java:193)

  at atg.epub.project._ProcessHome_Impl.createProcessForImport(_ProcessHome_Impl.java:25)

  at atg.epub.project._ProcessHome_ReposImpl.createProcessForImport(_ProcessHome_ReposImpl.java:3)

  at atg.epub.project.ProcessHomeMethods.createProcessForImport(ProcessHomeMethods.java:156)

  at atg.epub.project._ProcessHome_Impl.createProcessForImport(_ProcessHome_Impl.java:18)

  at atg.epub.project._ProcessHome_ReposImpl.createProcessForImport(_ProcessHome_ReposImpl.java:3)

  Thank you

  Alaux

  The issue was due to the wrong configuration at the server level. If these questions, consider carefully the spelling as OOTB Oracle code up all the significant exceptions that can lead to the resolution:

  At the level of unix:

  $hostname - a

  Above value must be used in configurations.

  In the publication server, boot, below the statements may be reviewed to validate your registration:

  2016-01-08 09:38:31, 548 INFO [nucleusNamespace.atg.scenario.ScenarioManager] (main) initialization editor bailiff : 10050

  2016-01-08 09:38:33, 447 INFO [nucleusNamespace.atg.scenario.InternalScenarioManager] (main), individual bailiff initialization : 10050. Course of the Process Editor configured server is defined on : 10150

  2016-01-08 09:38:33, 592 INFO [nucleusNamespace.atg.epub.workflow.process.WorkflowProcessManager] (main), individual bailiff initialization : 10050. Course of the Process Editor configured server is defined on : 10050

  * in our case

  Pub Server = server of the process Editor

  in the global server = server

  Corrections:

  : 10050

  : 10150

  Ref:

  Immuraliraj-TechTalks: how to solve the "atg.workflow.WorkflowException": ATG BCC

  Flow of work of the ITC not reflecting changes do not. Subject ATG

  Thank you

  Alaux

• Adobe PDF Document not getting not saved in Internet Explorer 10

  Hello

  We are facing problem to save PDF form in Internet Explorer 10. form is getting previewed correctly but when we save it keeps on loading and fails to save. Version Internet explore and the version of Adobe reader both are 10.

  kindly help to resolve the issue.

  Kind regards

  Amit Dhar

  With Player X, it depends on the shape. If the form has been active player then you should be able to save him. If it wasn't activated drive, it is probably the problem. XI and DC drive the recording without player which allows, but Reader X does not. So to install the latest version as suggested by Cynthia may solve your problem.

• CLOB getting not saved.

  Dear all,
  I have the following code. I'm trying to save the Clob data, but its does not save
  BindingContext cntx = BindingContext.getCurrent ();
  App = JUApplication
  (JUApplication) cntx.get ("AppModule_OutgoingEmailDataControl");
  ApplicationModuleImpl = appimpl
  (ApplicationModuleImpl) app.getApplicationModule ();
  
  OutgoingEmail_VOImpl obj =
  (OutgoingEmail_VOImpl) appimpl.findViewObject ("OutgoingEmail_VO1");
  Line OutgoingEmail_VORowImpl = (OutgoingEmail_VORowImpl) obj.createRow ();
  .
  .
  .
  row.setBody (new ClobDomain (nvl (getTxtBody () .getValue ()));
  
  where getTxtBody() returns the instance of the RichTextEditor.
  
  In the method of doDML() of EOImpl, I'll call the following stored procedure.
  String sql =
  "{pkg_template_mgmt_system_new.p_Add_Email(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)". call} ";
  CallableStatement cs =
  getDBTransaction () .createCallableStatement (sql, 1);
  cs.setString ("I_FROM_EMAILID", getFromId());
  .
  .
  .
  cs.setClob ("I_BODY", (CLOB) getBody () .getData ());
  
  Any ideas?

  Let me see... in the most recent versions of JDBC, I think that you can just create a string in array of char of the ClobDomain and use setString() on the statement.
  The pilot will make the CLOB manages for you.
  You can also do it explicitly. Use the connection interface to create a Clob, then fill with the data.

  Sascha

• Whenever I restart my Dell 3000 I get this message: "primary drive 1 not found; Secondary drive 1 not found. »

  Whenever I restart my Dell 3000 I get this message: "primary drive 1 not found; Secondary drive 1 not found. "Then, I received instruction to hit F 1 to continue, which then takes me by the beginning upward. I get as both "F 2 = Set up" and "F 12 = Boot menu." The latter I have looked but frankly have no idea what to do or how it might solve my primary problem. What should I do to simply go through the commissioning by turning on my computer?
  GRDavis

  * original title - starting problem *.

  This isn't a problem of Windows XP. But take a look here:

  http://forums.CNET.com/7723-10149_102-162197.html

• I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  Hello

  I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:

  http://support.Microsoft.com/kb/310123

  It will be useful.

• Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Thanks Tanuj,

  After reloading the software it seems to work now.

• I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Original title: remove unnecessary files

  I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Ditto for PCFIX.exe.

  How can I remove these and clean unnecessary files? Thank you.

  Hello

  1. how exactly you are trying to remove it?
  2 have you connected the administrator account?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Take possession of these program at the following location folder, and then check the issue. C:\Program Files\ 

  Reference: How is ownership of a file or a folder in Windows XP

• Error 633: the modem (or other connecting device) is already in use or is not configured correctly. Any solution?

  I have Microsoft Vista Home Premium edition. I use the data card (broadband +, model - HUAWEI EC1262) to connect to the internet.
  I get error 633 whenever I try to use the data card to connect to the internet on my laptop. He says that "the modem (or other connecting device) is already in use or is not configured properly" and preventing me from accessing Internet.

  I tried with a different brand of card data, but still getting same error. Map data even works on another laptop with Win7.

  I did all the options like:
  1 uninstall and reinstall modem drivers
  2. release the COM port and the new port assigng

  We always get but same error. Any solution for this problem would make.

  Have you tried system restore? If you can restore the system to the date where it worked fine maybe it will work.

  System Restore frequently asked questions.

• I can't choose a default program, error: "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  Original title: I can't choose a default program

  When I right click on a file and click on "choose program by default" I get the message "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.
  I use Windows7 that I've updated since Vista.
  It started a few months ago, but it really bugs me.
  Thanks for any help!

  When you run the command sfc/scannow., what the message said when it was over?

  You can set file associations use the default programs feature?
  http://Windows.Microsoft.com/en-us/Windows7/change-default-programs-using-set-program-access-and-computer-defaults

  You can check in a new user account to test if you have a corrupted profile:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• Error Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item. Cannot access Word.

  Original title: access windows

  I can't open word or all word documents that I saved.  I get the error message;  "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  Hello

  The problem you are having is related with Microsoft Word, I suggest you send the request to the Agency Forum for better support.

  http://answers.Microsoft.com/en-us/Office/Forum/Word?tab=all

• Huawei Sonic is recognized in devices and printers, and shows paired but not connected in the settings on the phone.

  Original title:

  Try to connect Huawei Sonic to win7x64 pro edition using bluetooth.  Huawei Sonic is recognized in devices and printers, and shows paired but not connected in the settings on the phone.  How do I overcame the problem of connection I want to transfer photos from phone to PC?

  Hello

  1. are you able to communicate and share with other Bluetooth devices?

  2. what happens when you transfer files?

  3. do you get an error message?

  4 you did changes to the computer, before the show?

  Method 1:

  Connect the phone to another computer and check.

  Method 2:

  If you are unable to connect to another computer, you can contact the manufacturer of the phone and check.

  http://support.Huawei.com/support/

• help Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  I downloaded a game and I'm going to open and it says Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  The thing is I had this game on this laptop before and worked fine.

  But every time that there is a update for the game, you have to uninstall it and then reinstall it.

  When I reinstalled it.

  I now get Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  It's windows 8, I am using.

  What is the problem?

  Hello

  Thanks for the reply.

  You can try to temporarily disable the antivirus program and check the results. It can also occur if you have not enough permission to run the file.

  Caution:
  

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Response with status.

• Hello how do I configure Firefox 8.0 so that he asks me if I want to save a password for a Web site. At the present time I don't get not an option whenever I go into a site I know is safe, I have to enter user name and password. I've been good tools etc.

  Hello how do I configure Firefox 8.0 so that he asks me if I want to save a password for a Web site. At the present time I don't get not an option whenever I go into a site I know is safe, I have to enter user name and password. I've been good tools etc.

  Thank you, any help would be help full like whenever I connect to Face Book for example I have to provide all the information and it's a pain

  Soon Alex

  See:

  • https://support.Mozilla.com/en-us/KB/make-Firefox-remember-usernames-and-passwords#w_make-Firefox-remember-usernames-and-passwords

• Receives the following message after opening a downloaded game: 'Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  Hello!
  So I'm at the end of my rope with this one... it lasts for months, and I keep revisitng every two weeks to try and fix that and every time to be completely frustrated.  I found this forum tonight, so here goes...

  We downloaded a few games on the HP Games Web site.  We download them and everything works fine.  Then, we will open the games and this pop up error message:
  "Windows cannot access the specified device, path or file.  You can not have the appropriate permissions to access the item.

  These games used to run fine, and I have no idea why they now have problems.  We have a Vista operating system, 1 account who is the administrator, the Parental control is disabled (or if we believe).

  If anyone can please help it would be much appreciated!  We have a monthly membership to this site of game and continue to accumulate credits, but may not use it.  It makes us crazy!

  Thank you in advance!

  Hello Heathie,

  Thank you for posting.  It seems that the program is no longer on your computer.  This can happen if the game files are deleted, but the game itself has not been uninstalled correctly.  I recommend you to download the game again to a location on your computer where you can easily find and install it.  This should fix the problem.

  Please let me know if this helps you.
  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.