Device's built-in FTP Explorer: change the target port?

Similar Questions

• Change the target of the library Variable shared by program

  I have a project in real time with the code that runs on a host PC and a cRIO who communicate using a library of shared on the cRIO variables. I am hosting the variables on the cRIO because who has worked much better than the accommodation on the host PC. For normal operation, this structure works perfectly.

  However, I'm now trying to implement a system that will allow the user to choose if they want to actually run the code on the cRIO or run a simulated system. The simulated system would occur on the host PC, so it is logical for this application for variables to be located on the host PC.

  To account for these two cases, I would change the target of the variable shared library depending on whether the real-time system is running or if the simuation is executed. I can do easily manually simply by dragging the library in the Project Explorer, but prefer to automate this process.

  In short, I try to develop a code that will change the target of a shared library of variable.

  I tried to do that by opening a reference to the project file, using the properties to get the library reference and change the target. However, the target property is read-only. Is there another way to do this or I'm stuck having to do it manually?

  It turns out that I had a version of the shared library Variable on the cRIO, so even when I welcomed the variables shared on the host PC, he always wrote in the cRIO. In fixing this issue, I have been able to accommodate the library on the host PC and get all what to run much more simply.

• change the com port assigned to the fax and scan

  I used fax and scanning for once.  I had to move my external modem to a different port.

  I don't know how to change the windows fax and scan com port manually.

  the wizard does NOT start, I guess because the fax is installed and worked until I had to change the number of COM port...  I need to change the number of pot with hundreds of research, it seems that no one knows how to change manually the Compote in windows fax and scan, unless they use the wizard.

  my assistant does not start. I guess I'm 'old school' I don't need an Assistant, I need to manually change the fax uses com port.

  :-), it's frustrating because help said only: click "fax" in the lower left corner, and they all assume the installation wizard starts and everything will be fine. :-(

  the wizard does not start. :-(

  I am desperate to get my fax work and need to know how to set the correct port number in a system that is installed and running, such as the wizard never starts.

  for anyone who goes out at the end of questions and ideas, I have a fax application stand alone who is working with the new port setting. It's just not a good app for my needs

  Please?

  Thank you

  John

  Post proposed by the moderator of the appropriate forum category

  Hi John,.

  You can follow the steps below to change the COM port for a modem:

  1. search the Device Manager.

  2 look for the Modem device, right-click on it, and then click Properties.

  • If the change settings button is present, you must click on it to make changes to the appliance. If the user account control dialog box appears, confirm that the displayed action corresponds to what you want, and then click continue.
  • If the change settings button is not present, the modem does not support the ability to change the modem settings. Refer to the documentation provided by the vendor of your modem.

  3. on the Advanced tab, click Advanced port settings.

  • If this option is not displayed, the modem does not support the ability to change the assigned COM port. Refer to the documentation provided by the vendor of your modem.

  If the same persists, we suggest that you post your query in Microsoft TechNet so that their support team will provide you in-depth assistance.

  Kind regards.

• Where can I find the ability to change the com port settings in Windows 7

  Where can I find the ability to change the com port settings in Windows 7

  Port, Device Manager, select comport, right click, properties, Port settings

• How to change the infrared port on Satellite M30 to be IrDA to be direct IR?

  Hello world

  I just bought a new watch that should be able to communicate with a pc via the infrared port (it's the Polar S710).
  Unfortunately, it does not work as the 'Protocol' of the watch is directIR, rather than be IrDA, as is my cell phone.

  I saw somewhere that it would be possible to change the infrared port of my laptop in order to operate in directIR. Anyone know the procedure? I think I could change something directly in the driver, but I did not how to deal with.

  I would be very grateful if someone could help me.

  Thank you
  SEB

  Hello

  I think that it of not possible to change the IrDA Protocol on the laptop.
  But have you tried to update the software polar?
  Consult the manufacturing site:
  http://support.polar.fi/PKBSupport.nsf/library?OpenForm

  If this does not help I think that only and an external solution as USB-> DirectIR dongle help

• How can I change the target directory for NOR-DAQ 6.9.3?

  I try to install NOR-DAQ 6.9.3 on a new laptop computer.  I tried to change the target directory, but the installer does not allow me to change it.  Is it possible to change the directory?

  When you say that the installation program does not let you change the directory target, you receive an error?  In my view, is it possible to change the target directory by selecting the feature in the feature tree, then by manually changing the target directory to the bottom of the installer.  When this is done, a pop up will occur who says a new folder will be created to save the files to.

• How to change the target of the .exe or shortened using the c language file

  Hi all, I use windows xp and there is a project in which I want to change the target of the file .exe and shortcut using the c language can any body help me with it, or give me any link I can gather some knowledge about this

  People who write programs and software to hang out in the MSDN forums, not here.  Visit the MSDN forums Web site and they will be able to help, if anyone can.

  http://social.msdn.Microsoft.com/forums/en-us/categories

• Change the listening port for SSH on IDS

  Should what command I use to change the listening port on an IDS 4200 series? I listen on another port, and when I applied the S189/S190 update, it changed SSH port 22.

  Just out of curiosity, too, no one knows what else S189/S190 updates change?

  Thank you

  Jim

  Cisco supports only configurations using the CLI interface. The ssh port cannot be changed through the CLI. Modifying the files in config system via the service account is not a good idea and not supported.

• Change the default ports for http and https

  Hello

  I'm trying to change the default ports for http and https

  I have a 506th PIX (which does NOT of NAT)

  I have the following: -.

  static (inside, outside) tcp 192.168.10.2 601 192.168.10.2 http netmask 255.255.255.255 0 0

  static (inside, outside) tcp 192.168.10.2 602 192.168.10.2 443 netmask 255.255.255.255 0 0

  access-list acl permit tcp any 192.168.10.2 eq 601

  access-list acl permit tcp any 192.168.10.2 eq 602

  Access-group acl in interface outside

  where 601 and 602 are the http port and https to be redirect to respectively.

  I changed the webserver accordingly

  I get the error message

  "No group of translation not found for tcp src outside:189.x.x.x/50232 dst inside:192.x.x.x/80" (trying to access port 80)

  "I also have ' fixup protocol http 601.

  I had access to the internal and external web server before attempting to change the default ports

  Any ideas where I'm wrong?

  See you soon.

  I apologise for not thinking correctly.

  the static method must be:

  static (inside, outside) tcp 192.168.10.2 80 192.168.10.2 601 netmask 255.255.255.255 0 0

  static (inside, outside) 192.168.10.2 tcp 443 192.168.10.2 602 netmask 255.255.255.255 0 0

• How to change the rmi port in atg

  Hi guys,.

  How to change the rmi port in atg

  who is the component to change port rmi in atg?

  The rmi port is defined in the component/atg/dynamo/Configuration. so in this Configuration.properties, you can change the value of the rmi port.

• Change the default port

  Can someone point me to a document that describes the steps to change the default port (8080) to another port on an existing Foglight environment?

  The Foglight Management Server (FMS) port is configured in FMSHOME/config/server.config:

  # These options are required, they must be configured for the server starts

  #

  Server.http.port = "8080";

  Server.HTTPS.port = "8443";

  You can change them by modifying the config file and restart the FMS.

  BUT:

  Remember that all Management Agent Foglight (FglAMs) use this port to send data to the FMS.

  Foglight users may have bookmarked FMS URLs with the original port number.

  Under Unix, a process must have permissions root a low numbered path (if you thought to change port 80)

  To make the seemless transition, you should consider implementing some sort of system (for example with an Apache web server) port forwarding so that agents and users who use the original port will not break.

  Kind regards

  Brian Wheeldon

• Change the listening port

  I am running Oracle 10.2 on Solaris. I want to change the listening port of 1521 to 2690. I've read that I'm supposed to change /opt/oracle/product/10.2.0/db_1/network/admin/listener.ora and restart the receiver. Here's my listener.ora:
  
  OPENVIEWLISTENER =
  (DESCRIPTION =
  (ADDRESS_LIST =
  ((ADDRESS = (PROTOCOL = tcp (PORT = 2690))(HOST=flare)))
  SID_LIST_OPENVIEWLISTENER =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = openview)
  (ORACLE_HOME=/opt/oracle/product/10.2.0/db_1)
  (SID_NAME = OpenView))
  )
  
  
  After the reboot, it is still the 1521:
  
  bash-beginning of lsnrctl $ 3.00
  
  LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 24-AUG-2008 16:53:33
  
  Copyright (c) 1991, 2005, Oracle. All rights reserved.
  
  From /opt/oracle/product/10.2.0/db_1/bin/tnslsnr: Please wait...
  
  TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
  System settings file is /opt/oracle/product/10.2.0/db_1/network/admin/listener.ora
  Log messages written to /opt/oracle/product/10.2.0/db_1/network/log/listener.log
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=flare.halcyoninc.com) (PORT = 1521)))
  
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  -----
  Alias LISTENER
  For Solaris TNSLSNR version: Version 10.2.0.1.0 - Production
  Departure date 24-AUG-2008 16:53:34
  Uptime 0 days 0 h 0 min 0 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /opt/oracle/product/10.2.0/db_1/network/admin/listener.ora file
  The listener log file /opt/Oracle/product/10.2.0/Db_1/network/log/listener.log
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=flare.halcyoninc.com) (PORT = 1521)))
  The listener supports no services
  The command completed successfully
  
  What I am doing wrong? :(
  
  

  user527462 wrote:
  I am running Oracle 10.2 on Solaris. I want to change the listening port of 1521 to 2690. I've read that I'm supposed to change /opt/oracle/product/10.2.0/db_1/network/admin/listener.ora and restart the receiver. Here's my listener.ora:

  OPENVIEWLISTENER =
  (DESCRIPTION =
  (ADDRESS_LIST =
  ((ADDRESS = (PROTOCOL = tcp (PORT = 2690))(HOST=flare)))
  SID_LIST_OPENVIEWLISTENER =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = openview)
  (ORACLE_HOME=/opt/oracle/product/10.2.0/db_1)
  (SID_NAME = OpenView))
  )

  After the reboot, it is still the 1521:

  bash-beginning of lsnrctl $ 3.00

  LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 24-AUG-2008 16:53:33

  Copyright (c) 1991, 2005, Oracle. All rights reserved.

  From /opt/oracle/product/10.2.0/db_1/bin/tnslsnr: Please wait...

  TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
  System settings file is /opt/oracle/product/10.2.0/db_1/network/admin/listener.ora
  Log messages written to /opt/oracle/product/10.2.0/db_1/network/log/listener.log
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=flare.halcyoninc.com) (PORT = 1521)))

  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  -----
  Alias LISTENER
  For Solaris TNSLSNR version: Version 10.2.0.1.0 - Production
  Departure date 24-AUG-2008 16:53:34
  Uptime 0 days 0 h 0 min 0 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /opt/oracle/product/10.2.0/db_1/network/admin/listener.ora file
  The listener log file /opt/Oracle/product/10.2.0/Db_1/network/log/listener.log
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=flare.halcyoninc.com) (PORT = 1521)))
  The listener supports no services
  The command completed successfully

  What I am doing wrong? :(

  Your listener.ora sets a listener named OPENVIEWLISTENER. You have not specified the name of the listener when starting it and so he went with the default values (name of the LISTENER listener and so on). The command you are looking for is lsnrctl start OPENVIEWLISTENER

  concerning

  Niall Litchfield
  http://www.orawin.info/

• Windows 7 / Windows Explorer - change the file names to have all lowercase letters

  I save files with uppercase letters in the name of the file.  Since going to Windows 7, it seems that Windows Explorer continues to change the names of files to have all lowercase letters.  Is there a setting that will allow me to record names of files with upper and lower case letters without exploring automatically change them?

  Hi LeslieWeber,

  -How long have you had this problem?

  -What software changes you did on the computer before the show?

  Follow these steps and see if the problem persists:

  Step 1:

   

  Create a new user account and check if the problem is recurring in the newly created account.

  Step 2:

  If the problem does not persist in the new user account, it could indicate that your old user account is corrupted.

  Access the link below and follow the steps to repair the corrupted user profile:

  Difficulty of a corrupted user profile

• Audio device not working not because I changed the OS from WIN XP to WIN 7 but the I have the sound card!

  I have a sound card on my system and it worked correctly with windows xp... but few days back when I changed my OS to WINDOWS 7, the audio device no longer works! his watch the following message on roubleshooting 'No Audio Device Installed "! I checked for drivers, but couldn't find them on the net! I also tried to find them through the updates windows automatic update, but still not recovered the problem! What should I do? Please suggest me a solution!

  If you have a real soundcard as appositive to an audio chip on the motherboard, all win7 drivers would get this site of sound card manufacturers.

  However since win7 cannot find/install any audio driver by default I think this card is not supported under win7.

  I guess you do not have to use the win7 Upgrade Advisor, before installing win7, which would show any material not supported

• How can I change the default port 443 on Windows Server Essentials 2012?

  I'm trying to install on my server remote access, but port 443 is already in use with another server on the same configuration broadband, so I need to change to allow access.

  Also, what should I change on the computers to connect to this port

  Concerning
  Steve

  Hello

  Welcome to the Microsoft community forums!

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserveressentials/threads

  
  If you need to change the port for remote access,

  You can search on a lot after u come and change port 443

  
  http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads
   
   
  Hope this information helps.