Device to Windows Mobile and Windows 7

Similar Questions

• Windows XP "Apple Mobile Device Driver not installed not" device need driver mobile HELP running XP service pack 3 using an iphone 4

  Problems with the iphone 4 who it says in itunes that "Apple Mobile Device Driver not found" and nothing happens when it is connected to the USB port on charge even not. Running Windows XP 32-bit with Service Pack 3. but think I deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers. Apple went through just fine and everything is OK it is a problem of PC and XP. Microsoft help put me on this site because need to know how to solve this problem I hope that somewhere there are mobile device drivers that work with the iphone? Site Internet de Microsft has 5 mobile device for Windows 7 drivers, but not for XP. Need help!

  Apple went through just fine and everything is OK it is a problem of PC and XP.

  Evasive classic.  It's always the problem of the other guy.

  And the classic response of some evil-educated person "technical support":

  Microsoft help put me on this site

  If the error message says 'Mobile Apple Device not found Driver' then it's an Apple problem, pure and simple.  The device driver mobile for the iPhone comes from Apple, not Microsoft.

  Do you remember what you were doing when you "deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers?"

  Probably not... and you have not explained what has been included in "Apple went through everything."  It is time to start over by removing everything related to Apple and then put it back correctly.

  First, however, the fact that the iPhone does not load even when connected to a USB port is a bit worrying.  Works in everything else in this USB port (for example, a USB flash drive)?

  Have you tried all the USB ports on your computer?  Take a look in the Device Manager (start > run > devmgmt.msc > OK) and see if there are any icons showing warning.  If so, double-click on the entry and information "device status".

  Take a look at the event viewer (start > run > eventvwr > OK).  There is no need to go far.  Connect your iPhone, then look at the newspapers (System and Application) for since a few minutes see if there are any errors or warnings.  If so, double-click on it to get the event properties window, and then click the "Copy" icon (just below of the)

  Have you tried to recharge the iPhone using the adapter connected to Apple's USB cable?  Does it work?

  Have you tried to connect the iPhone to another computer?  With what results?

  Assuming that the hardware (iPhone, USB cable, and USB ports on your computer) is not working properly, see the following topics.

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.

  Warning: uninstall utility for cleaning Windows mentioned in the instructions below has been removed from Microsoft download servers because sometimes it seems more removed he was supposed to (I think that this phenomenon was linked to the bureau uninstalls).  You can still get utility Windows Installer Cleanup--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html here is a free alternative Revo Uninstaller. Before using these cleaning products, you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  Go to control panel > Add/Remove programs
  Remove these applications:
  1 Apple Software Update
  2. Apple Mobile Device Support
  3 Hello
  4 iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)
  5 iTunes
  6 QuickTime

  Open my computer > C: > Program Files
  Delete this files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  Download & install the Windows Installer Cleanup utility: [see note above regarding cleanup utility]
  http://support.Microsoft.com/kb/290301/
  Launch the utility: start > programs > Windows Installer Clean Up
  Select one of the applications mentioned above and click on remove

  Restart the computer
  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• I screwed up trying to install windows on my computer 10 and I XE off installer and now its says "no boot device - insert boot disk and press any key".

  I was just trying to download 10 on my computer windows using boot camp assistant. I answered the questions for windows when you need to respond as what kind of language you use and then I messed up on one of the questions. I didn't know how to go back so I just pressed the red x. When I did that he must get off my computer and when it's done I got a black screen and then it says "No boot device - insert boot disk and press any key" I don't know what he meant by no bootable disk and I was hoping that you guys can help me fix.

  If stop you your Mac and your power it back up and hold down the Alt/Option key, you see a Windows selection? If so try to select and see if the installation will continue.

• Windows 7 when I turn the laptop it says check cable connection pxe - mof: outgoing intel pxe rom no boot device insert boot disk and press any key

  Windows 7 when I turn the laptop it says check cable connection pxe - mof: outgoing intel pxe rom no boot device insert boot disk and press any key

  Hello

   

  1. What is the brand and model of the laptop?

  2 have you made any changes to the computer before the show?

   

  Method 1:  Change the boot order in the BIOS settings:

  See the following steps:

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  (a) start on typing Dungeon either F1, F2, F10, Esc, or DEL to enter the BIOS Setup.

  Warning: some manufacturers use F10 for recovery of the system.

  (b) glance to "Drive Configuration", "Boot order" or similar

  (c) check the second drive the first boot device CD/DVD and hard drive.

  (d) to save the settings and exit.

   

  Method 2:

  Step 1: Trying to boot into safe mode and see if that helps.

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If step 1 work, try step 2

  Step 2:  A clean boot to check if startup item or services to third-party application is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

• Could not start the Services "Apple Moble device" in windows (Window 7) from my laptop

  I am unable to start the Services of "Apple Moble device" in windows (using windows 7) to my laptop in order to use iTunes software to work with my iPad.

  Every time when I tried to work with my iPad with the installed iTunes, which prompted because of the Services 'Apple Moble Device"not started, so cannot use the iPad with iTunes. I tried several times to launch the "device Moble Apple' Services manually in the Control Panel, but everytimefailed.

  No matter, I reboot the machine, or remove the iTune and installed it again, it has always failed.

  However, my iPad works fine with other computers, so it should not be the problem of the iPad. What will be the problem with my Windows 7 on my desktop? Will there be other software or services in my laptop had to start or stop me from starting Services "Apple Mobile Device"?

  Hello

  Method 1:  Check that the Apple Mobile Device Service is installed and works using the software component Services MMC snap-in of components:

  (a) on the start menu, click search.

  (b) type services.msc, and then click OK. You will see a list of services.

  (c) view the list alphabetically and make sure "Apple Mobile Device Service" status is "started".

  (d) if the State does not indicate that the service is started, right-click Apple Mobile Device Service and choose Start from the context menu.

  (e) if the service is installed and started, right-click the service and select Restart from the context menu.

  Method 2: If the steps above did not help follow the steps described in the following link and check if that helps.

  http://support.Apple.com/kb/TS1538

  http://support.Apple.com/kb/TS1567

• Since upgrading my iPhone 5s IOS 9.3.5 yesterday, so I can't see the camera of the iPhone as a device in Windows do not seem to be a direct way to upload my pictures on my PC.  Is it possible to download my pictures to my PC without iCloud?

  Since upgrading my iPhone 5s IOS 9.3.5 yesterday, I see more the camera of the iPhone as a device in Windows.  Therefore, with this update of IOS, I do find a direct way to upload my pictures on my PC.  Is there a way to download my photos on my PC without having to download them to iCloud?  My PC is Windows 7 Pro (64 bit).

  What I've always done, is to download my photos directly on my PC by using the option to remove the iPhone with the download.  I really want to continue to do so!

  Thank you!

  Hello

  Follow the steps here:

  • Import photos and videos from your iPhone, iPad or iPod touch - Apple Support
  • If you cannot import pictures from your iPhone, iPad or iPod touch to your computer - Apple Support

• DirectDraw application will be black screen once what output device in Windows 7

  My directdraw full application screen, screen will be black once what output device in Windows 7
  but it never happens in Windows 2000 or windows XP with DX9.0c
  Is - Windows 7 or caused DX11?
  Is there a solution?

  Fri_fiscan,
  More than likely the games you are trying are not compatible with Windows 7.  To check go here: Windows 7 Compatibility Center also there is a thread of people discuss issues with DirectDraw.  You can take a look and see if there are all the elements that can help.

  Wire direct Draw Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot access a HID device get code 5 error please let me know how to access a HID device, I need an example of code to access a HID device in windows 7.Thanks.R.M. Kiran

  /*******************************************************
  Simplification of Windows HID

  Alan Ott
  Software signal 11

  22/08/2009

  Copyright 2009, all rights reserved.
   
  The contents of this file can be used by anyone
  for any other reason without conditions and can be
  used as a starting point for your own applications
  that appeal to HIDAPI.
  ********************************************************/

  #include
  #include
  #include
  #include
  #include "hidapi.h".

  The headers needed to sleep.
  #ifdef _WIN32
  #include
  #else
  #include
  #endif

  int main (int argc, char * argv)
  {
  int RES;
  unsigned char buf [256];
  #define MAX_STR 255
  WSTR wchar_t [MAX_STR];
  hid_device * handle;
  int i;

  WIN32 #ifdef
  UNREFERENCED_PARAMETER (ARGC);
  UNREFERENCED_PARAMETER (argv);
  #endif

  struct hid_device_info * devs, * cur_dev;
     
  devs = hid_enumerate (0x0, 0x0);
  printf ("id=%d\tsproduct id = %d\n",devs-> vendor_id provider, devs-> product_id ");
  cur_dev = devs;
  so that {(cur_dev)
  printf ("detecte\n device type: % 04hx %04hx\n path: %s\n Serial_number: %ls", cur_dev-> vendor_id, cur_dev-> cur_dev-> path, product_id, cur_dev-> Serial_number);
  printf ("\n");
  printf ("manufacturer: %ls\n", cur_dev-> manufacturer_string ");
  printf ("product: %ls\n", cur_dev-> product_string ");
  printf ("output: %hx\n", cur_dev-> release_number ");
  printf ("Interface: %d\n", cur_dev-> interface_number);
  printf ("\n");
  cur_dev = cur_dev-> next;
  }
  hid_free_enumeration (devs);

  To implement the command buffer.
  Memset (buf, 0x00, sizeof (BUF));
  buf [0] = 0x01;
  buf [1] = 0x81;

  Open the unit by using the VID, PID,
  and possibly the serial number.
  handle = hid_open (0x4d8, 0x3f, L "12345");
  handle = hid_open (0 x 0461, 0x4d81, NULL);
  If (! handle) {}
  printf ("cannot open device\n");
  Return 1;
  }

  Read the manufacturer string
  WSTR [0] = 0x0000;
  RES = hid_get_manufacturer_string (handle, wstr, MAX_STR);
  If (res<>
  printf ("could not read the manufacturer string\n");
  printf ("string of the manufacturer: %ls\n", wstr ");

  Read the product chain
  WSTR [0] = 0x0000;
  RES = hid_get_product_string (handle, wstr, MAX_STR);
  If (res<>
  printf ("cannot read string\n product");
  printf ("string of product: %ls\n", wstr ");

  Read the serial number string
  WSTR [0] = 0x0000;
  RES = hid_get_serial_number_string (handle, wstr, MAX_STR);
  If (res<>
  printf ("could not read the serial number string\n");
  printf ("string of serial number: (%d) %ls', wstr [0], wstr");
  printf ("\n");

  Read the indexed string 1
  WSTR [0] = 0x0000;
  RES = hid_get_indexed_string (handle, 1, wstr, MAX_STR);
  If (res<>
  printf ("could not read the string indexed 1\n");
  printf ("indexed 1 string: %ls\n", wstr);

  Define the function hid_read() as non-blocking.
  hid_set_nonblocking (handle, 1);
     
  Try reading from the device. It is and must be without
  given here, but enforcement should not block.
  RES = hid_read (handle, buf, 17);

  Send a report on the device
  buf [0] = 0x2;
  buf [1] = 0xa0;
  buf [2] = 0x0a;
  buf [3] = 0x00;
  buf [4] = 0x00;
  RES = hid_send_feature_report (handle, buf, 17);
  If (res< 0)="">
  printf ("cannot send a feature report. \n") ;
  }

  Memset (buf, 0, sizeof (BUF));

  Read a report of the device
  buf [0] = 0x2;
  RES = hid_get_feature_report (handle, buf, sizeof (buf));
  If (res< 0)="">
  printf ("failed to get a feature report. \n") ;
  printf ("%ls", hid_error (handle));
  }
  else {}
  Print the buffer returned.
  printf ("function Report\n");
  for (i = 0; i< res;="">
  printf ("% 02hhx", buf [i]);
  printf ("\n");
  }

  Memset (buf, 0, sizeof (BUF));

  LED toggle (cmd 0x80). The first byte is the report number (0 x 1).
  buf [0] = 0x1;
  buf [1] = 0x80;
  RES = hid_write (handle, buf, 17);
  If (res< 0)="">
  printf ("could not write () \n");
  printf ("error: %ls\n", hid_error (handle));
  }

  Status request (cmd 0x81). The first byte is the report number (0 x 1).
  buf [0] = 0x1;
  buf [1] = 0x81;
  hid_write (handle, buf, 17);
  If (res<>
  printf ("impossible to write() (2) \n" ");

  Read the requested State. hid_read() has been set to be
  non-blocking by the call to hid_set_nonblocking() above.
  This loop shows the non-blocking of hid_read() nature.
  Res = 0;
  While (res == 0) {}
  RES = hid_read (handle, buf, sizeof (buf));
  If (res == 0)
  printf("waiting...\n");
  If (res<>
  printf ("could not read () \n");
  WIN32 #ifdef
  Sleep (500);
  #else
  usleep(500*1000);
  #endif
  }

  printf ("read data: \n");
  Print the buffer returned.
  for (i = 0; i< res;="">
  printf ("% 02hhx", buf [i]);
  printf ("\n");

  hid_close (handle);

  / * Free of static objects of HIDAPI. */
  hid_exit();

  WIN32 #ifdef
  System ("pause");
  #endif

  return 0;
  }

  Hi KIRAN RM,.

  Given that you need example code to access a HID device in windows 7, the question you have posted is better suited for the MSDN Forums. Please post your query in the link next to the support of the MSDN forum for further assistance.

  Windows hardware development

• How can I get the USB Audio device in option audio device for Windows XP?

  USB Audio will not appear as an option. However, the Audio USB headset is an option. Help. Thank you

  Hi VincentMr,

  ·         What is the brand and model of the USB audio device?

  You may need to install the device drivers on the device manufacturing site, or else you must have received the CD of the software with the device.

  See the following article for more information on the update of drivers:

   

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Let us know the results.

• Error message indicating the problem with the monitor of devices in Windows XP.

  Original title: Device Monitor

  Error message indicating the problem with the monitor of devices in windows xp. How to fix?

  Hello

  1. when exactly you receive this error message?

  2. What is the brand and model of your computer?

  3. What is the exact error message that you receive?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• Error installation software device driver for removable devices in Windows Vista x 64

  I have Windows Vista x 64 installed on my PC and nVidia Forceware motherboard and graphic cards.

  When I plug in any removable drive into my USB 2.0 port, Windows starts the installation of the device driver software and then sees it as an unknown device. The dialog where he asks me if I want to 'locate and install driver software', 'Ask Me later' or 'don't show this message for this device.

  I select the recommended option: "locate and install driver software.

  I click 'Continue' when Windows asks me permission to continue.

  Then, when the execution of the installer of the software in the bottom right of my screen, the installation of driver software for device, it shows "unidentified device failed.

  Then another window pops up saying this:

  "Found New Hardware - device unknown".

  Windows encountered a problem installing the software driver for your device

  Windows found driver software for your device but encountered an error trying to install it.

  Kodak

  An error occurred during the installation of the device:

  The driver for this device is missing a necessary entry. Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.

  If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »

  That's what he does when I'm trying to connect my Kodak Easyshare M550 digital camera. I would go ahead and contact Kodak, but the problem seems to extend to ANY removable device on my computer.

  For example, I have a Lexar Flashdrive. When I plug it into my USB 2.0 port, it Windows says the following:

  "Windows needs to install driver software for your USB Flash Drive", etc...

  'Install the device driver software', 'USB Flash Drive search Windows Update'...

  Then a window opens asking me to "insert the disk that came with your USB key. Problem is that no driver disk not supplied with the hardware that Windows Vista is supposed to come with the drivers. I know this because the camera and usb flash drive worked very well until I reinstalled Windows Vista on my new hard drive (new installation, because my old hard drive crashed) and I've NEVER had to install device drivers for Windows to recognize it as a removable drive and operate automatically.

  Also, I installed Daemon Tools Lite and I had to manually "Update" the device driver to point to the "Windows\INF" folder in my hard drive, after copying the cdrom files needed for the specific subfolders for windows to let the program assign a drive letter for the drive virtual it creates.

  I think that perhaps not all device drivers have been installed when I installed Windows Vista, this time. If that's the problem, I don't know how that could happen, nor how to fix it, but I really prefer to find a way to solve this problem without reinstalling Windows Vista again. I don't mind not manually install the drivers as long as someone can show me what files to copy and where to find them on the Windows Vista disk that I bought at Microsoft. I KNOW that Windows HAS come with these drivers.

  If anyone knows how I can fix this, please tell me, because it's ridiculous to not be able to use any removable device readers (except for the use of all Flash drives). Thanks in advance.

  I know it can be frustrating to solve problems.

  (A) was this post or hibernation sleep?

  Microsofts troubleshooting KB

  http://support.Microsoft.com/kb/928631

  (B) the bios settings

  First of all you do not state if you tried to see if there was a setting in bios disabled USB ports during the startup. Or how the bios was set to install devices automatically. If you check your manual site or the motherboard manufacturer

  It will tell you which key to press. And where your USB ports are on or off. Some systems do not have to turn on or off.

  Plug n play OS on conscious

  could help Vista automatically recognize your USB

  (C) what version where do you use? SP1? or gold?

  (D) USB hubs may cause problems just be hubs. Power connected?

  (E) and of course if it is a case check connection in the right port. Return panel slide? plugged into port back?

  Hope something here helps

  Keith

• Cannot open the synaptics pointing device in windows vista, upgrades are far but message error, unable to connect to the synaptics pointing device

  Hi I have a problem with my mouse/pointer when I click on the mouse to open it I have error message unable to connect to the synaptics pointing device. Have you checked the updates that are up-to-date, and the driver is ok, not sure what to try next need to make any changes to the mouse pointer

  with Brice thanks.

  Hi paiyay,

  Thanks for posting in the Microsoft Community.

  I understand that you are unable to open the synaptics pointing device in windows vista

  · You did changes to the computer before the show?

  · What happens when you click the Yes button in the error message?

  · You are able to use the mouse on the system?

  I suggest you uninstall the software from programs and features and then try to open the properties of the mouse and check if you are able to open the mouse properties then I would you recommend to uninstall the drivers that are installed on the system in the Device Manager and then download the drivers from the link below and check if the problem is resolved.

  http://www.Synaptics.com/support/drivers

  http://www.Synaptics.com/resources/drivers

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Connect the hard disk, and then try running the fix tool of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  I suggest you to contact the mouse manufacturer for assistance. Click on the link below.

  http://www.Synaptics.com/

  See also:

  FAQ and troubleshooting

  http://www.Synaptics.com/resources/consumer-tips

• Driver VGA Dual-Mode Camera installs but the device does not appear in the list of devices to Windows Photo Gallery

  Driver VGA Dual-Mode Camera installs but the device does not appear in the list of devices to Windows Photo Gallery

  Hello

  I will need to know the brand and model of the device in order to help you solve it.

  You see the device listed in the Control Panel, hardware and sound, scanners and cameras?
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.