DG primary and awaiting review

Similar Questions

• Is it possible to configure Thunderbird to send an email to the primary and laternate email outside an address list?

  I use Thunderbird 17.0.6 on a Windows 7 platform.

  Some of the names in my address book have an e-mail address and an alternate email address. Is it possible to send the e-mail sent to this name to two primary and alternative address? I know that I can use a list or a key name in the field on two occasions, by selecting the desired address.

  I was expecting a button that would automatically send e-mail to two address when the alternative e-mail address field has a value.

  There is nothing like this. Usually send the same mail to the person even on the two e-mail addresses would be considered spam them and can see you banned from some e-mail systems.

• How primary and secondary channel IDE Windows XP home supposed to have?

  Original title: IDE

  Primary and secondary IDE channels how is xp family supposed to have?

  The information provided indicates a primary and secondary IDE channel, but I don't know where you got this information from.

  I suggest that you download, install and run the Belarc Advisor:

  Belarc Advisor - free PC Audit staff
   http://www.Belarc.com/free_download.html

  Belarc provide you with lots of information about your system. Once you have run it and you're on the computer profile summary, just underneath the main sections, you should see model system (right hand); just below will be your brand and model that he determined.

  Just below under the first point main Circuit Board 's advice, the model of motherboard.

  With this information visit the support site of the manufacturer of the computer and the search for documentation on your specific model, the manual should contain information about the number of IDE connectors on the motherboard.

  Similarly, you may be able to Google the motherboard model and locate the information you want.

  Kind regards

• Want to know primary and secondary configuration to the call, Manager with the voice gateways

  Hi all

  Hope you all are doing well, I wanted to know that we have two other PRI service provider and we want one of them are primary and secondary schools on the other. We have two supplier dedicated 4-4 finish lines. Please provide me with the part of configuration that are required in this case and how to re a SP for primary education and another SP for secondary lines.

  Thank you

  Arjun keita

  Hello Arjun,

  For the full bridge configuration you can check the guides below, but for the PRI redundancy, you create dial-peers and specify the feedback:

  https://www.Google.co.in/URL?SA=t&source=Web&RCT=j&URL=http: / / www.cisco...

  Voice POTS dial-peer 1

  Destination-pettern 0 t

  Port 0/0/0:15

  Preference 0

  Dial-peer voice 2 pots

  Port 0/0/1:15

  Preference 1

  Dest-model 0 t

  Dial-peer voice 3 pots

  Description incoming only

  Incoming called-number. T

  Direct inward dial

  Aseem

  (Please rate if useful)

• WLC primary and secondary - Config DHCP Scope

  Hi all

  WLCs: AIR-CT2504-K9

  We have therefore two 2504 s each in separate locations. Inside of each of the Access Points, we have configured one of the controllers of the WLC primary and the other as the secondary WLC tab HA. So my question has to do with the internal DHCP configured in each of the controllers scope.

  We only use the internal DHCP server of the WLCs for our Public Wi - Fi network. And I was wondering if I should configure the DHCP scope even in two controllers, or if they are supposed to be different?

  For example:

  Elementary WLC - extended DHCP: 10.12.202.110 - 10.12.202.200
  Secondary WLC - extended DHCP: 10.12.202.xxx - 10.12.202.xxx?

  The way in which access points are configured, they should only be attached to a controller or another. So that the way its set up it shouldn't be some APs on a single controller and some of the other. They should all be attached to the WLC even at any time. So, given that I can configure the same scope on both controllers?

  Any ideas or suggestions would be greatly appreciated!

  Thanks in advance,
  Matt

  Yes, you can set up this way, as long as you don't expect not so much operational WLC & customer service at the same time.

  If you think to expand this network of comments, I suggest you stay away from using DHCP internal like these WLCs has ever made to use as complete apart from entire DHCP servers in large scale networks.

  HTH

  Rasika

  Pls note all useful responses *.

• WLC primary and secondary

  Is there a way to add controller dymanic interface using WCS and push down to the primary and secondary WLC?

  Can I use the same IP address for the dynamic interface on both controllers? Basically, this IP address use to request DHCP for clients.

  Thank you

  IP address of all dynamic interfaces must be different form each WLC. I add interfaces manually and don't use WCS.

• A primary and backup/replica ACS server may be on different versions?

  Hello

  (2) ACS' (for example: a common unit 1120 5.x version and a version of runnig quanta 1113 4.x) 1 primary possible version 5.x with a replica version 4.x?  If not, what are the requirements between implementation of a primary and backup/replica for devices?

  Thank you

  James

  Hello

  No, you can not made the two device replication you talked,

  The only requirement is that the devices are exactly same version and patach construction so that the replication working.

  Thank you

  Waris Hussain.

• Different between primary and logical partition?

  Referring to the next video, after a free space for the new partition, I create partition, which show the logical drive (blue color), but the other partitions are of primary partitions (blue color), I would like to know it possible to create a main drive instead of logical drive partition, and what difference is between the primary and logical partitions.

  There is an option to delete a logical partition (drive D :), after you remove it, can he create a new primary partition?) Through this process, it will cause no problem on the primary partition (drive c :))?

  Is there an advantage to have a logical partition (drive D :)?

  In the future, if I need more space in C: drive, it will be easier to extend the primary partition (drive c :)) with logical partition (drive D :)?

  If a logical partition (drive D :) convert primary partition, it will be easier to extend the primary partition (drive c :)) with primary partition (drive D :)?)

  http://www.YouTube.com/watch?v=jKW6ROWZ5yU

  Does anyone have any suggestions?

  Thanks a lot for your suggestions

  Hello

  Thanks for posting your query in Microsoft Community!

  According to the description, it seems you want to know the differences between the primary and logical partitions.

  I'll be happy to help you with this.

  I suggest you to refer to the following articles and check if it helps.

  Understanding Disk Partitions

  http://TechNet.Microsoft.com/en-us/library/dd799232 (v = ws.10) .aspx

  What are partitions and logical drives? (Applies to Windows 7)

  http://Windows.Microsoft.com/en-in/Windows-Vista/what-are-partitions-and-logical-drives

  If you have any questions on Windows, feel free to let us know. It is our pleasure to be of service.

• What is the difference between codec primary and secondary codec in cts-3000?

  Hello

  I'm a novice on telepresence. This community is only a place to resolve issues for me.

  What is the difference between codec primary and secondary codec in cts-3000?

  I know the primary function of the codec. but I don't know exactly of secondary function of codec.

  Help me please.

  Hello

  On a CTS 3000 system, you have 1 codec primary and secondary 2 codecs. Secondary codecs are responsible for the camera left and right and view the connections. They communicate the main codec via an Ethernet cable.

  Here is a guide to the installation of a CTS-3000 so that you can see the routing of cables.

  http://www.Cisco.com/c/en/us/TD/docs/Telepresence/cts_3000/guide/3000_assembly_guide/CH08_Routing_Power_and_Signal_Cables.html

  In addition, if you are interested to learn more about the telepresence as of last year, Cisco introduced the video CCNA certification track. Maybe it's something you are interested in.

  https://learningnetwork.Cisco.com/community/certifications/ccna_video

  PEI

• change ip address of the database servers primary and standby

  Hello.

  I have an oracle server primary and backup (version 11.2.0.4) on windows 8 profesional.

  They work well until today.

  Today, I had to change my ip address on both servers.

  After that I changed the ip address of the OS, I changed the ip address in tnsnames.ora and listener.ora files only.

  A moment that everything worked well. But now the archivelog files not copy to the standby server.

  Is there a place where I have to change ip or the settings on the database?

  Please, I hope you can help me.

  Best regards

  Hello

  After that I changed the ip address of the OS, I changed the ip address in tnsnames.ora and listener.ora files only.

  A moment that everything worked well. But now the archivelog files not copy to the standby server.

  1. If it worked for a while after the change of ip address

  3. make sure your journal alerts, what it says? information about the error?

  2. first thing ipadress sequenced in tnsnames.ora and listener.ora on primary and standby

  3. check ping to the host-level work and tnpsing is reached or not. If both are working check listeners are up or not and they are able to identify the services of db, registered or not.

  4. now, connect as sysdba password on the servers file

  5 check v$ achive_Dest_status for valid or relevant destination which is assistance for the transfer of the archives of primary Eve (the error column)

  -Not especially to knew what the problem is, you should get the controls.

  -Pavan Kumar N

• How to join two tables to retrieve the data from the columns in table two. Tables have primary and foreign key relationships

  Hello

  I want to join the two tables to retrieve the data from the columns of the two table passing parameters to the join query. Tables have primary and foreign key relationships

  Details of the table

  Alert-1 - AlertCode (FK), AlerID (PK)

  2 AlertCode-AlertDefinition-(PK)

  Help, please

  
  

  ----------
  

  Hi Vincent,.

  I think that you have not worked on adf 12.1.3.  In adf 12.1.3 you don't have to explicitly create the association. When you create the EO to your table, Association xxxxFkAssoc, will be created by ADF12.1.3 for you automatically. Please try this and do not answer anything... You can also follow the links below. I solved the problem by using the following link

  Oracle ADF Guide step by step - Oracle ADF tutorial: creating a relationship of the master / detail using Oracle ADF

  ---

• How to configure Enterprise Manager Database Control (MCCD) to make it work on 2 servers (primary and standby) work according to the rules of the DG

  Hello everyone I use Oracle Database EE 11.2.0.4 with DG.

  In these cases, I need to get Enterprise Manager Database Control running against DB with no CARS and no DG I do the following:

  I have SQLPLUS logon as user SYS or SYSTEM and drop the account sysman and business objects:

  DECLARE

  CURSOR c1 IS

  SELECT master, synonym_name name

  OF dba_synonyms

  WHERE table_owner = "SYSMAN";

  BEGIN

  TO r1 c1 LOOP

  IF r1.owner = "PUBLIC" THEN

  RUN IMMEDIATELY "DROP PUBLIC SYNONYM ' |" R1. Name;

  ON THE OTHER

  RUN IMMEDIATELY "DROP SYNONYM ' |" R1. Owner: '. ' || R1. Name;

  END IF;

  END LOOP;

  END;

  /

  Mgmt_view DROP USER CASCADE;

  /

  DROP ROLE mgmt_user;

  /

  Sysman DROP USER CASCADE;

  /

  After that, I run

  EMCA - config dbcontrol db-rest recreate

  But what do I do in case I have 2 servers (primary and standby) work according to the rules of the DG?

  Hello

  It is not possible to monitor and administer a basic physical or logical standby, IE using Enterprise Manager Database Control Data Guard.  This is mainly due to the fact that Database Control is designed to monitor the 1-database and an environment Data Guard, by definition, includes more than 1 database.

  If you attempt to run emca against a database of pending, you will get an error like (i.e. ORA-01219: database is not open).

  Of course, database Control, can be used to monitor the current main database (with no capacity to administer or control Data Guard related features).  In such a case, failover Database Control needs to be reconfigured to run on the new primary database using the commands described in detail in Note 278100.1 how to remove, create and recreate DB Control In A Database, section c. recreate/ReConfig DB control, Option 2 10 g. recreate the control DB Configuration files and repository.

  Enterprise Manager Grid Control or Cloud control provides the functionality for display, monitor, and administer the primary and standby databases in a Data Guard configuration.

  Reference: It is Possible to configure the database for a logical or physical Standby Database command? (Doc ID 315116.1)

  You can effectively use EM 12 c cloud control to monitor and manager ensures DB

  Ref to the link for more details below

  Set up and manage to Oracle Data Guard with Oracle Enterprise Manager Cloud control 12 c

  Kind regards

  Rahul

• Several primary and physical databases Configuration ensures in Data Guard Broker

  Hello

  Is it possible to add two or several primary and physical databases configuration ensures in data guard broker?

  I have 1 primary databases and two databases physical standby that is

  (1) primary that is pri - (database primary)

  (2) secondary i, e, s (physical pending)

  (3) Secondary2 i.e. sec2 (physical pending)

  Practical AM sinister place, my scenario is my pri and dry machines are in seat, if the pri crashed it switch to s that works very well and my S2 is in another area office. Suppose that if my two siege machines pri and sec crashed, so I want to do my mahcine sec2 as primary.

  I have two separate computers to the broker a headquarters and a District Office

  Use failure of quick start on Data Guard Broker, broker headquarters machine I have configured pri and dry but in sector office broker not able congifured pri and S2 and the machine.

  can be done several primary database configuration with data bases on hold?

  Has anyone done this before, or has a perform a recovery after loss of place...

  need help or suggestion

  thanx

  No.... It is not possible. When you use the DG broker, the first thing you can do in the DGMGRL utility is to deliver CONFIGURATION to CREATE. You can see on the doc of this command that you define here the PRIMARY DATABASE.

  The command to add a DATABASE to the broker, adds a new database pending. You cannot add an another primary.

  The broker configuration is explicitly for a primary and all standby databases is supported. If you have an another primary, you create a separate DG broker configuration.

  See you soon,.
  Brian

• Three ways to join with key primary and composite foreign

  Hi all

  I have three tables

  1 - test_data_items (test_data_item_id pk

  test_data_item_name)

  2 - data_items_in_tests (test_id, test_data_item_id) - both are a composite primary key.

  3 - test_results (test_results_id, pk,

  test_admin_id,

  test_id, test_data_item_id)-both are a composite foreign key.

  How to reach the three tables?

  I want all the data, but I don't know how to write the join conditions when there are primary and foreign keys composite?

  Thank you very much

  Hello

  Any condition (including a join condition) may be a compound of 2 or more of the simple conditions, combined using AND or OR.

  Maybe that's what you want:

  SELECT *- or the columns that you want to the list

  Test_data_items I have

  JOIN data_items_in_test d.test_data_item_id d = i.test_data_item_id

  JOIN test_results r ON r.test_data_item_id = d.test_data_item_id

  AND r.test_id = d.test_id

  ;

  In this case, the join condition between tables d and r is a compound of 2 simple conditions, combined with the help of and.

  The above query is just a guess.  There is not necessarily a unique way to join any 2 tables given.  Aptly named columns (and yours seem to have good names) and foreign key constraints can help you make better guesses about how to join the tables, but they are still all speculation.  They same 2 tables can be attached in different ways, depending on what is in the tables and what results you expect from them.  It's one of the reasons why, whenever you post a question, you must post a small example data (CREATE TABLE and INSERT statements), the results that you want from this data, as well as an explanation of how you get these results from these data.

  See the FAQ forum: https://forums.oracle.com/message/9362002

• Purge logs archiving on things primary and Standby and for Data Guard RMAN

  
  Hi, I saw a couple of orders in regard to the purge archive records in a Data Guard configuration.

  Set UP the STRATEGY of SUPPRESSION of ARCHIVE to SHIPPED to All RELIEF;

  Set UP the STRATEGY of ARCHIVELOG DELETION to APPLIED on All RELIEF;

  Q1. The above only removes logs archiving to the primary or primary and Standby?

  Q2. If deletions above archive logs on the primary, is it really remove them (immediately) or does the FRA to delete if space is needed?

  I also saw

  CONFIGURE ARCHIVELOG DELETION POLICY TO SAVED;

  Q3. That what precedes, and once again it is something that you re primary side?

  I saw the following advice in the manual of Concepts of data protection & Admin

  Configure the DB_UNIQUE_NAME in RMAN for each database (primary and Standby) so RMAN can connect remotely to him

  Q4. Why would I want my primary ro connect to the RMAN Repository (I use the local control file) of the standby? (is this for me to say define RMAN configuration settings in the Standby) manual

  Q5. Should I only work with the RMAN Repository on the primary or should I be also in things in the deposits of RMAN (i.e. control files) of the standby?

  Q6. If I am (usually mounted but not open) Physics, of standby I able to connect to its own local repository for RMAN (i.e. control based on files) while sleep mode is just mounted?

  Q7. Similiarly if I have an old lofgical (i.e. effectively read-only), to even connect to the local RMAN Repository of Eve?

  Q8. What is the most common way to schedule a RMAN backup to such an environment? example cron, planner of the OEM, DBMS_SCHEDULER? MY instinct is cron script as Planner OEM requires running the OEM service and DBMS_SCHEDULER requires the data runs?

  Any idea greatly appreciated,

  Jim

  The above only removes logs archiving to the primary or primary and Standby?

  When CONFIGURE you a deletion policy, the configuration applies to all destinations archive

  including the flash recovery area. BACKUP - ENTRY DELETE and DELETE - ARCHIVELOG obey this configuration, like the flash recovery area.

  You can also CONFIGURE an archived redo log political suppression that newspapers are eligible for deletion only after being applied to or transferred to database backup destinations.

  If deletions above archive logs on the primary, is it really remove them (immediately) or does the FRA to delete if space is needed?

  Its a configuration, it will not erase by itself.

  If you want to use FRA for the automatic removal of the archivelogs on a database of physical before you do this:

  1. make sure that DB_RECOVERY_FILE_DEST is set to FRA - view parameter DB_RECOVERY_FILE_DEST - and - setting DB_RECOVERY_FILE_DEST_SIZE

  2. do you have political RMAN primary and Standby set - CONFIGURE ARCHIVELOG DELETION POLICY to APPLY ON ALL STANDBY;

  If you want to keep archives more you can control how long keep logs by adjusting the size of the FRA

  Great example:

  http://emrebaransel.blogspot.com/2009/03/delete-applied-archivelogs-on-standby.html

  All Oracle is worth a peek here:

  http://emrebaransel.blogspot.com/

  That what precedes, and once again it is something that you re primary side?

  I would never use it. I always had it put it this way:

  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;

  I would use only 'BACKED UP' for the data protection system. Usually it tell oracle how many times to back up before removing.

  Why would I want my primary ro connect to the RMAN Repository?

  Because if you break down, you want to be able to backup there, too.

  Also if it remains idle for awhile you want.

  Should I only work with the RMAN Repository on the primary or should I be also in things in the deposits of RMAN (i.e. control files) of the standby?

  Always use a database of catalog RMAN with Data Guard.

  If I am (usually mounted but not open) Physics, of standby I able to connect to its own local repository for RMAN (i.e. control based on files) while sleep mode is just mounted?

  Same answer as 5, use a catalog database.

  Similiarly if I have an old lofgical (i.e. effectively read-only), to even connect to the local RMAN Repository of Eve?

  Same answer as 5, use a catalog database.

  What is the most common way to schedule a RMAN backup to such an environment? example cron, planner of the OEM, DBMS_SCHEDULER? MY instinct is cron script as Planner OEM requires running the OEM service and DBMS_SCHEDULER requires the data runs?

  I think cron is still, but they all work. I like cron because the database has a problem at work always reports its results.

  Best regards

  mseberg

  Summary

  Always use a database with RMAN catalog.

  Always use CRF with RMAN.

  Always set the deletion «To APPLY ON ALL STANDBY» policy

  DB_RECOVERY_FILE_DEST_SIZE determines how long to keep the archives with this configuration.

  Post edited by: mseberg