DHCP does not not in windows8 pro

Similar Questions

• Install Windows 8 Pro on window 8 does not affect it Pro Windows, no HYPV

  I bought a machine with Windows 8

  I bought a new Windows 8 Pro.

  I installed Windows 8 Pro on Windows 8

  Control Panel, system does not show window Pro 8, just Windows 8.

  I was unable to install HYPV.

  I called Microsoft Support and after some time, the engineer was able to fix it for me.

  Today, I tried to do a restore on Windows 8 Pro and it says that it failed.

  Dialog box said, seeking resolutions.

  He went far and nothing

  Still, I have installed Windows 8 Pro.

  I went to the HYPV facility, and it was not an option.

  I looked on the Control Panel, system, and it says: Windows 8, Windows not Pro.

  I called the new Microsoft support, which proved Omnitech support or something.

  They have accessed remotely in my machine, ran some application, then said, "Oh, he concluded that all these junk files, registry settings, basic stuff these programs always show and that was probably the cause of the problem."

  For them, I mentioned I had a SR on this back when, these parameters do not result in this question and Microsoft engineer has been able to fix, and there was no response.

  As people at Microsoft have been able to fix it for me, I would like to know what they did, so I can apply the same fix.

  Remote MS - guy in my machine and was able to run something that fixed it.

  Apparently it's a bug in the Windows Installer process 8.

  I'm afraid that this could happen again, and I want to be ready for it.

  Any help would be appreciated, even someone who can find this original SR, a KB or something

  Thank you

  RichLoba

  Hello

  Since we do not know what software or tools were used by Ominitech support to solve the problem. As you mentioned that the problem has been resolved with Omnitech support, you must have had a session of cat or a call with the support of Omnitech session. Then I suggest that you contact them with the number of file or request that you received service.

  http://www.omnitechsupport.com/

• How to let sfc.exe replace damaged dll cache files when presario v3000 does not see xp pro cd?

  Hello

  SFC. EXE/scannow ask me to put my xp pro disk, so it can copy files into the dll cache.  When I put the disc in the cd drive, he said something to the effect of "you must have used the wrong disc or the disc is damaged" and just stop there.

  My cd/dvd drive is not presented in win Explorer or the Manager of devices for about 2 months now.  I did each every every thing, including the removal of the upper and lower filters 2 weeks ago (I deleted the wrong key registrey and just now in my office!).  I do not think that caused sp3 cd player to disappear, as I've been running for a very long time now and the cd player that disappears is fairly recent.

  My question is: How can I get the dll files in my cache dll if my cd player does not work?  Maybe corrupt dll files are what initially is the cd player to disappear.  I tried to copy files to a flashdrive system32 but sfc will seek only a cd player.

  Thank you very much...

  Liliane

  Hello

  SFC. EXE/scannow ask me to put my xp pro disk, so it can copy files into the dll cache.  When I put the disc in the cd drive, he said something to the effect of "you must have used the wrong disc or the disc is damaged" and just stop there.

  My cd/dvd drive is not presented in win Explorer or the Manager of devices for about 2 months now.  I did each every every thing, including the removal of the upper and lower filters 2 weeks ago (I deleted the wrong key registrey and just now in my office!).  I do not think that caused sp3 cd player to disappear, as I've been running for a very long time now and the cd player that disappears is fairly recent.

  My question is: How can I get the dll files in my cache dll if my cd player does not work?  Maybe corrupt dll files are what initially is the cd player to disappear.  I tried to copy files to a flashdrive system32 but sfc will seek only a cd player.

  Thank you very much...

  Liliane

  First, run fix cd carpet first to see if it will solve your problem with your devive rom.

  http://support.Microsoft.com/kb/982116

  A description of sfc / scannow from MS.

  "System File Checker allows an administrator to analyze the files all protected to check their versions." If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker. »

  http://support.Microsoft.com/kb/310747

  When you receive the error message you have inserted the wrong disk, it could be the drive has bad service pack, or it could be that the system searches for the wrong drive.

  Click Start > run > type regedit > click ok.

  Navigate to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup . Click the "setup" folder to expand the content in the right pane. Scroll through the list in the right pane and look for "SourcePath". Make sure that the source path is set to the drive letter of the rom of the device.

  If the source path is set correctly, I suspect that the disc contains a pack of different service that is installed on the computer. There is a solution to this as well.

  Click on the link below and download the Service Pack 3 for IT Tech. Save the file. Once the download download and install the trial version of Winrar from the second link below. After Winrar is installed, right click on the Service pack 3 file and choose "Extract here" with Winrar. When the extract window opens type C:\ in the location of file for the files to be extracted. This will place the file i386 in the root of the C drive. Then, return to the instructions above for the source path and replace the source C:\ path. Now, run sfc/scannow again.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en

  http://download.CNET.com/WinRAR-32-bit/3000-2250_4-10007677.html

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Cisco WLC 2504 internal DHCP does not work properly

  Hi all

  I m trials with a Cisco WLC 2504 and some APs of 1832. I set up a DHCP scope on the interface of the controller with 2

  a large number of different configurations, but the DHCP protocol does not work and Don t Access Point to obtain an IP address. My first question: is it possible to do DHCP for Access Points or only for wireless clients?

  These are my interfaces:

  Interfaces

  

  Interface of the PA-Manager:

  Interfaces1

  

  Interfaces2

  

  My DHCP scope:

  Scope1 DHCP

  

  Portee2 DHCP

  

  Advanced DHCP:

  DHCP Scope3

  

  I forgot something? Is there anyone using DHCP for its access points?

  Thank you!

  Hello

  On Cisco WLC internal DHCP, you can add the option 43 to say where APs must register. In this case, they will try to resolve the DNS CISCO-CAPWAP-CONTROLLER or CISCO-LWAPP entry.

  Let me explain briefly how AP-Manager works on WLC:

  1. Boots of Access Point and sends a discovery request to the management interface of the controller using the intellectual property you configured as DHCP Option 43 (as described above, it can be resolved by the DNS entry)
  2. Controller, sends it a response discovered that contains the name of the system, addresses AP-Manager, the number of access points already connected to each interface AP-Manager and the overall capacity of the controller.
  3. Joints access point controller using the less loaded interface AP Manager.

  With this, every AP Manager must have a good configured interface and be connected to a different port, no LAG.

  I drop a post here sometimes there is which might help:

  https://supportforums.Cisco.com/document/118311/configuring-multiple-AP-...

  Thank you

  PS: Please do not forget to rate and score as correct answer if this answered your question

• Update does not apply first pro

  Yes, I'm a little late but I'm trying to update first Pro 5 to 5.5.2 because the eyedropper does not work. I downloaded the 5.0.1 and 5.0.2 to 5.0.3 update - no problem. Adobe download page and then passes the 5.0.4 for Electronic downloads (which I did) and then is 5.5.1. But when it tries to download 5.5.1 I get an error message saying that the update is not applicable. So I'm stuck.

  Using iMac 2009

  OS - 10.7.5

  Any help would be appreciated.

  @

  As I remember, version 5.5 was a PAID upgrade, not a free update to version 5.0

  As 5.5 is no longer sold, there is no way to upgrade

  You can always buy Creative Suite 6

• Kindle does not connected macbook pro sharing network

  Sharing my internet does not work on kindle 7th generation, it says that it is connected to wifi but not internet. But this internet sharing works perfectly on all other devices. I share of ethernet port thunderbolt, which is behind my proxy of the Institute. I do not understand how to make the static settings on the kindle. I tried this link https://discussions.apple.com/thread/2743129 , but it did not work!

  Mac OS X 10.10.5

  You should probably talk to the Amazon Kindle support people. My Kindle has Wifi or Internet connection problems often, and if everything else works fine, then it sounds like the Kindle. http://www.Amazon.com/GP/help/customer/display.html?nodeID=200127470

  Good luck

  GB

• Client DHCP does not start because of the dependency

  Suddenly my laptop IBM T61 Windows XP sp3 Pro link is more to my Belkin router either wired or wireless. This started after I hosted a series of Windows to perform updates. Using the command ipconfig and other signs, it seems that the DHCP process no longer occurs. Research in Non-Plug-and-Play Device Manager, I could see that there was a yellow flag next to 'netBT' which is a dependency for a number of services such as DHCP. Windows suggested I uninstall and then reinstall the netBT.sys "driver". Well, it uninstalled OK but it is now out of the list and without him in charge I'm cut network (I have a Vista laptop second Home that I use on the lookout for ideas tech). I moved a copy of netBT.sys from the SP3 i386 folder in system32\drivers to replace the old, just in case.
  How to me netBT to load and work again? I spent several hours restart, activation and deactivation and anything else I could think or find Tech Tips.

  SOLVED. NetBT corrupt registry entry. HKLM\system\currentcontrolset\services\NetBT
  After many hours of detective work, I found the idea in the journal of the events through MSCONFIG. Error type 7001 means service could not start because of a dependency (I knew that), but he went on to say "dir name or path incorrect syntax. I went into the registry and used exactly the same syntax of path as specified in "system32\DRIVERS\netBT.sys" NetBIOS and DHCP service has started.

  Jim in Arizona

• Update to 6.5 vm: bridged dhcp does not work anymore

  I have an older version of VM machine 5 with windows xp sp3 on it.

  With the help of vm workstation 6.5 I improved the VM to 6.5.

  From that moment, the virtual network adapter is not able to get an ip address from the router on the host computer

  where it is connected via the network bridge.

  If I set a fixed IP address (in the subnet host range) everything works fine.

  so, my conclusion was that somehow dhcp queries fail.

  Decommissioning of the VM to version 5 again fixed things. DHCP works again.

  Someone at - it an idea how I could solve this problem?

  No, we have to GUESS why he had with a front fixed IP... I swear to you, so many "problems" would be resolved itself if people actually have the time to learn what they are doing. OR the age old RTFM before you do something.

  We also do not know if it is a family environment or in a company. Any other set of problems can happen in both.

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• Media Encoder does not from Premiere Pro

  I'm having issues export from Premiere Pro - I've had enough of queue through Media Encoder so I can move on to the next edition, but when I select the queue and Media Encoder opens, it does nothing - just sitting there with "not currently Encoding" rather than import the data to export.

  Help?

  • Adobe Media Encoder, 6.0.2.81
  • Installed as other products CC Ps, Pr, Id, Lr, AI, etc.
  • I ran Adobe Updater but no update available for me.
  • Mac OS X 10.7.5 (Lion)
  • I use Adobe Media Encoder via a subscription to creative cloud
  • Project 6 minute film shot on the Sony (AVCHD) FS700 and Premiere Pro exports
  • No error message, just no enforcement action
  • Have not seen the problem before that - most of my work is Canon 5 d MK III vi, so maybe it's a problem of Codec Sony? Although I exported the images from the camera before...
  • Apple MacBook Pro 17 ",
  • I use acceleration GPU of Mercury Playback Engine in Premiere Pro

  See you soon

  Finally got fed up and rang Adobe (if all else fails...)

  Member of the open video Support team my library folder (Go\Go to folder...\~/Library/) and then went into \Preferences\Adobe\Adobe Media Encoder\ and changed the folder called 6.0 to 6.0old (i.e. rename it to something else), then click queue in Premiere Pro and the project successfully opened in Media Encoder and was able to start coding.

  I hope this helps someone else suffers from the same issue!

  Ollie

• OfficeJet Pro 8100: Utilities application does not start, Officejet Pro 8100

  The printer is working fine, except for the occasional streaks. The problem is when I try to access the cleaning utilities, etc.. When I try to open the app, I see a flash hourglass for a second or two, and it goes no further. I don't see any new task in the windows Task Manager. I completely uninstalled the printer and reinstalled, no luck. Any thoughts?

  Hi @dtbradio,

  Thank you for joining the HP Forums!

  I understand that the demand for public services will not start HP Officejet pro 8100 on Microsoft Windows 7. I'm happy to help you!

  Please first try our HP print and Scan Doctorand let me know the results!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope to hear from you soon and thank you for posting!

• Why deleting 60 gb HD in standby mode does not prevent XP pro install to any other hard drive?

  The 60 gb HD when the works rehabilitated perfectly, going in and out of the previous day and stops correctly again if I get any other player, I am unable to get a new intall of XP PRO to complete.
  I think I proved the laptop itself retains the illegal abduction in car information.
  Installing xp gets as much as just before this first screen where it displays 39minutes go or somesuch, stop the message of
  "a write operation was attempted to a volume after it was dismantled"
  restart for the INSTALLATION RESTART program and then going in circles.
  Any help much appreciated.

  Hello

  So what do you have? Installed a new drive or just back to the old one? Maybe your disk is not inserted properly or the drive is may be defective.

  Check your drive with certain tools? One useful thing is the "UBCD - Ultimate Boot CD" where are many tools to check the hard disks.

  I suggest you to control your player with this CD.
  Here´s the link to the image:

  http://www.ultimatebootcd.com/

  Please give some comments.

  Welcome them

• Mac does not print Officejet Pro 8500

  I have an Officejet Pro 8500 Wireless.  Last week I set up with a Belkin wireless router.  I work on both OS - a Windows WP and Mac Lion.  The XP is print wirelessly, without a break.  I got the Mac to recognize the printer, and Mac utility will print the wireless test pages.  However, when I send regular (of any type) documents to the printer, they never proceed with printing.  The window of State says they are printing, but nothing ever happens.

  I have already invested 20 hours in this and I hope that someone here might be able to help me solve this problem.

  Thank you

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Download and install this: http://support.apple.com/kb/DL907

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Client DHCP does not not on my desk

  I can't connect to internet on my desktop computer, ethernet light shows like work, but send it and receive lights blinking. The DHCP client is not running on this computer appears - and also a problem with your modem broadband may prevent any connection to the internet. However, I can connect properly using my laptop - as I am now. How can I fix the connection on my desktop?

  Hello

  What is the exact error message and the error code?

  Try the following and see if it helps.

  Method 1:

  Network connection problems: http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-network-connection-problems

  Method 2:

  Check the proxy server settings are turned on. To do this, try the following steps:

  a. disable the proxy on Internet Explorer (IE)
  b. Click Start, type inetcpl.cpl and press to enter.
  c. click on the Connections tab, click the LAN Settings button.
  d. uncheck "Use a proxy server for your LAN" under proxy server.
  e. click ok to apply the changes.
  f. open Internet Explorer and check if the problem persists.

  Method 3:

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers: http://support.microsoft.com/kb/928233

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Also see: http://windows.microsoft.com/en-us/windows-vista/change-tcp-ip-settings

  Note: If you are always faced with the question, I suggest you try to contact an ISP (ISP) to verify connectivity and for further assistance settings.

  I hope this helps.

• Cisco 877W DHCP does not automatically fill the Windows/Mac customers with DNS server entries

  I have a 877W which was operational on Verizon for about 5 years. It never automatically distributed info DNS server for customers who get DHCP issued IP address. I have to manually enter the DNS entries to each client.  What happened to other sites where I've got installed on AT & T as well as 877 unified communications.

  Here is the config. Thanks in advance for the help.

  Building configuration...

  Current configuration: 7987 bytes
  !
  version 12.4
  no service button
  tcp KeepAlive-component snap-in service
  a tcp-KeepAlive-quick service
  horodateurs service debug datetime localtime show-timezone msec
  Log service timestamps datetime localtime show-timezone msec
  encryption password service
  sequence numbers service
  !
  Cod of hostname
  !
  boot-start-marker
  boot-end-marker
  !
  logging buffered debugging 51200
  recording console critical
  enable secret 5 jSwA $1$ $ 3B5lJNqm0ewh
  !
  AAA new-model
  !
  !
  AAA authentication local-to-remote login
  local remote of the AAA authorization network
  !
  AAA - the id of the joint session
  !
  resources policy
  !
  PCTime-6 timezone clock
  PCTime of summer time clock day April 6, 2003 02:00 October 26, 2003 02:00
  IP subnet zero
  IP cef
  No dhcp use connected vrf ip
  DHCP excluded-address IP 192.168.7.1 192.168.7.19
  DHCP excluded-address IP 192.168.7.70 192.168.7.254
  !
  IP dhcp pool sdm-pool1
  import all
  network 192.168.7.0 255.255.255.0
  router by default - 192.168.7.1
  DNS-server 68.238.96.12 68.238.112.12
  !
  !
  inspect the IP name DEFAULT100 cuseeme
  inspect the IP name DEFAULT100 ftp
  inspect the IP h323 DEFAULT100 name
  inspect the IP icmp DEFAULT100 name
  inspect the IP name DEFAULT100 netshow
  inspect the IP rcmd DEFAULT100 name
  inspect the IP name DEFAULT100 realaudio
  inspect the name DEFAULT100 rtsp IP
  inspect the IP name DEFAULT100 esmtp
  inspect the IP name DEFAULT100 sqlnet
  inspect the name DEFAULT100 streamworks IP
  inspect the name DEFAULT100 tftp IP
  inspect the tcp IP DEFAULT100 name
  inspect the IP udp DEFAULT100 name
  inspect the name DEFAULT100 vdolive IP
  synwait-time of tcp IP 10
  IP domain name cods.com
  name of the IP-server 68.238.96.12
  name of the IP-server 68.238.112.12
  property intellectual ssh time 60
  property intellectual ssh authentication-2 retries
  !
  !
  Crypto pki trustpoint TP-self-signed-437228204
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 437228204
  revocation checking no
  rsakeypair TP-self-signed-437228204
  !
  !
  TP-self-signed-437228204 crypto pki certificate chain
  certificate self-signed 01
  30820254 308201BD A0030201 02992101 300 D 0609 2A 864886 F70D0101 04050030
  2 060355 04031325 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 30312E30
  69666963 34333732 32383230 34301E17 303731 30313632 33333131 0D 6174652D
  395A170D 2E302C06 1325494F 03550403 32303031 30313030 30303030 5A 303031
  532D 5365 6C662D53 69676E65 4365 72746966 69636174 652 3433 37323238 642D
  06092A 86 4886F70D 01010105 32303430 819F300D 00308189 02818100 0003818D
  BF73E16C 24A3FB0B A44C83C8 45ACEC75 163C2F0A 87836F7F A43FEB72 0EF26AFA
  C7F35ED6 CBCC6853 5E82B0A6 1FD8020B F3630023 AB30B870 B3155EE6 86988910
  4ACF5121 1CBFF4DC B705DF1E 5D0D698F 06493 D 3DD8D036 42 FE450D21 E26A4DAF
  CE6BA806 81A9F451 0246698E DA7B49E3 160F115C E1104FA9 31FA3C15 CD 782 279
  02030100 01A37E30 7C300F06 03551 D 13 0101FF04 05300301 01FF3029 0603551D
  20821E63 11042230 6F64732E 6F666472 63697479 6E677370 69707069 72696E67
  732E636F 6D301F06 23 04183016 24 D 77493 80142FA3 03551D 52CF7094 B847B6EB
  1385E2E5 0F3A301D 0603551D 0E041604 142FA324 D7749352 CF7094B8 47B6EB13
  85E2E50F 3A300D06 092 HAS 8648 01040500 03818100 076EE499 12F46D79 86F70D01
  375B7EA6 C9279DA4 B32723B5 908C9FB8 D42CB978 BB24A8FE 73579A3D CA 5130, 87
  B7716644 7E13710D C6E6360C D0A36F7B F62540E2 0C33523B E50396B9 2EF66FA7
  56519E62 E55EAF3C E1D9BEC9 3AE67B59 75E61F06 B649E90A 2798F755 7A020F0A
  F8BDABFA 1EE37B6A A918560D DA45AD70 801BC66E 94D1468E
  quit smoking
  username privilege 15 secret $5 1jgO$sGD@#l4yTtLtYoEZbh/Wl steal551.
  !
  !
  door-key crypto vpn_ddaus
  pre-shared key address 0.0.0.0 0.0.0.0 - key stealthfortyfor5
  door-key crypto vpn_rmlfk
  address of pre-shared-key 205.30.134.22 key stealthfortyfor5
  !
  crypto ISAKMP policy 10
  md5 hash
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 30
  BA 3des
  preshared authentication
  Group 2
  invalid-spi-recovery crypto ISAKMP
  ISAKMP crypto keepalive 20
  !
  Configuration group isakmp crypto VPNRemote client
  key ConnectNow45
  pool ippool
  ISAKMP crypto vpnclient profile
  VPNRemote identity group match
  client authentication list for / remote
  Remote ISAKMP authorization list
  client configuration address respond
  Crypto isakmp CODS_DDAUS profile
  key ring vpn_ddaus
  function identity address 0.0.0.0
  Crypto isakmp CODS_RMLFK profile
  key ring vpn_rmlfk
  function identity address 205.30.134.22 255.255.255.255
  !
  !
  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
  !
  Crypto-map dynamic dynmap 10
  Set transform-set RIGHT
  vpnclient Set isakmp-profile
  Crypto-map dynamic dynmap 12
  Set transform-set RIGHT
  CODS_DDAUS Set isakmp-profile
  !
  !
  MYmap 1 ipsec-isakmp crypto map
  defined by peer 205.30.134.22
  Set transform-set RIGHT
  CODS_RMLFK Set isakmp-profile
  match address CODS_to_RMFLK
  map mymap 65535-isakmp ipsec crypto dynamic dynmap
  !
  Bridge IRB
  !
  !
  interface Loopback10
  IP 1.1.1.1 255.255.255.0
  !
  ATM0 interface
  no ip address
  route IP cache flow
  No atm ilmi-keepalive
  DSL-automatic operation mode
  !
  point-to-point interface ATM0.1
  Description $FW_OUTSIDE$ $ES_WAN$
  Check IP unicast reverse path
  inspect the DEFAULT100 over IP
  NAT outside IP
  IP virtual-reassembly
  PVC 0/35
  aal5snap encapsulation
  !
  Bridge-Group 2
  !
  interface FastEthernet0
  !
  interface FastEthernet1
  !
  interface FastEthernet2
  !
  interface FastEthernet3
  !
  interface Dot11Radio0
  no ip address
  no ip-cache cef route
  no ip route cache
  !
  encryption vlan 1 tkip encryption mode
  !
  SSID tsunami
  VLAN 1
  open authentication
  authentication wpa key management
  Comments-mode
  WPA - psk ascii 7 14231A0E01053324363F363B36150E050B08585E
  !
  base speed - 1.0 2.0 basic basic-5, 5 6.0 9.0 basic-11, 0 12.0 18.0 24.0 36.0 48.0 54.0
  root of station-role
  !
  interface Dot11Radio0.1
  encapsulation dot1Q 1 native
  no ip route cache
  no link-status of snmp trap
  No cdp enable
  Bridge-Group 1
  Bridge-group subscriber-loop-control 1
  Bridge-Group 1 covering-disabled people
  Bridge-Group 1 block-unknown-source
  No source of bridge-Group 1-learning
  unicast bridge-Group 1-floods
  !
  interface Vlan1
  Description $ETH - SW - LAUNCH, INTF-INFO-HWIC $$ $4ESW $FW_INSIDE$
  no ip address
  IP tcp adjust-mss 1452
  Bridge-Group 1
  !
  interface BVI1
  Description $ES_LAN$ $FW_INSIDE$
  192.168.7.1 IP address 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  route IP cache flow
  IP tcp adjust-mss 1412
  !
  interface control2
  IP 70.14.49.134 255.255.255.0
  NAT outside IP
  IP virtual-reassembly
  crypto mymap map
  !
  local pool IP 10.10.10.1 ippool 10.10.10.254
  IP classless
  IP route 0.0.0.0 0.0.0.0 70.14.49.1
  !
  IP http server
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  overload of IP nat inside source list 133 interface control2
  !
  CODS_to_RMFLK extended IP access list
  IP 192.168.7.0 allow 0.0.0.255 192.168.1.0 0.0.0.255
  !
  recording of debug trap
  access-list 1 permit 192.168.7.0 0.0.0.255
  access-list 100 remark self-generated by the configuration of the firewall Cisco SDM Express
  Access-list 100 = 1 SDM_ACL category note
  access-list 100 deny ip 70.14.49.0 0.0.0.255 any
  access-list 100 deny ip 255.255.255.255 host everything
  access-list 100 deny ip 127.0.0.0 0.255.255.255 everything
  access ip-list 100 permit a whole
  access-list 101 permit ip 192.168.7.0 0.0.0.255 192.168.3.0 0.0.0.255
  access-list 133 deny ip 192.168.7.0 0.0.0.255 192.168.1.0 0.0.0.255
  access-list 133 deny ip 192.168.7.0 0.0.0.255 10.10.10.0 0.0.0.255
  access-list 133 deny ip 192.168.7.0 0.0.0.255 192.168.10.0 0.0.0.255
  access-list 133 deny ip 192.168.7.0 0.0.0.255 192.168.3.0 0.0.0.255
  access-list 133 allow ip 192.168.7.0 0.0.0.255 any
  not run cdp
  mymap permit 10 route map
  corresponds to the IP 111
  set ip next-hop 1.1.1.2
  !
  !
  control plan
  !
  Bridge Protocol ieee 1
  1 channel ip bridge
  Bridge Protocol ieee 2
  IP road bridge 2
  connection of the banner ^ CAuthorized access only!
  Unplug IMMEDIATELY if you are not an authorized user. ^ C
  !
  Line con 0
  no activation of the modem
  telnet output transport
  line to 0
  telnet output transport
  line vty 0 4
  privilege level 15
  transport input telnet ssh
  !
  max-task-time 5000 Planner
  Scheduler allocate 4000 1000
  Scheduler interval 500
  end

  Hello

  Can you try to remove the IMPORT ALL of the dhcp pool

  RES
  Paul

  Sent by Cisco Support technique iPad App

• DHCP does not work on 877W.-m.

  I have a 2nd hand 877W-M, updated the bootloader and iOS for more later.

  and now im trying to configure DHCP, as it seems to me, it is done now and should be 'working '.

  but I did not at all given ip, and the weird part is that he trows an error just after the command 'write '.

  I have also reset the router for ' conf-registration 0 x 2101 ' but when it reloads, it goes to 36 * something.

  regarding the error TI trows in after 'write' sound "% IP addresses may not configured on L2 links."

  Here's the version on how it works now:

  With the help of 3350 131072 bytes

  !

  ! Last modification of the configuration at 07:45:46 UTC Saturday, March 27, 2010

  version 15.1

  no service button

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  877W.-m host name.

  !

  boot-start-marker

  boot the system to boot tftp 255.255.255.255

  boot system flash: c870-advipservicesk9 - mz.151 - 4.M6.bin

  start the system flash c870-advipservicesk9 - mz.151 - 4.M6

  Start flash system

  boot-end-marker

  !

  !

  enable secret 5 *.

  activate the password *.

  !

  No aaa new-model

  !

  Crypto pki token removal timeout default 0

  !

  Crypto pki trustpoint TP-self-signed-2740876176

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 2740876176

  revocation checking no

  rsakeypair TP-self-signed-2740876176

  !

  !

  TP-self-signed-2740876176 crypto pki certificate chain

  certificate self-signed 01

  *****

  quit smoking

  dot11 syslog

  IP source-route

  no ip Routing

  !

  !

  DHCP excluded-address IP 192.168.2.0 192.168.2.20

  !

  IP dhcp pool lan.local

  network 192.168.2.0 255.255.255.0

  default router 192.168.2.3

  Server DNS 192.168.2.3

  !

  !

  IP dhcp dns update

  !

  no ip cef

  No ipv6 cef

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  !

  Archives

  The config log

  hidekeys

  0 username cisco password Cisco

  !

  !

  !

  !

  !

  !

  !

  !

  !

  ATM0 interface

  no ip address

  no ip route cache

  Shutdown

  No atm ilmi-keepalive

  CDP enable

  !

  interface FastEthernet0

  no ip address

  !

  interface FastEthernet1

  no ip address

  Shutdown

  !

  interface FastEthernet2

  no ip address

  Shutdown

  !

  interface FastEthernet3

  no ip address

  Shutdown

  !

  interface Dot11Radio0

  no ip address

  no ip route cache

  Shutdown

  Base speed - 1.0 2.0 basic basic-5, 5 6.0 9.0 basic-11, 0 12.0 18.0 24.0 36.0 48.0

  54.0

  root of station-role

  !

  interface Vlan1

  no ip address

  no ip route cache

  Shutdown

  !

  IP forward-Protocol ND

  IP http server

  local IP http authentication

  IP http secure server

  !

  !

  !

  !

  !

  !

  !

  !

  control plan

  !

  !

  Line con 0

  exec-timeout 0 0

  no activation of the modem

  Speed 115200

  line to 0

  line vty 0 4

  password *.

  opening of session

  transport of entry all

  !

  max-task-time 5000 Planner

  end

  IM guess im overlooking something simple, but I don't have experience with router and yet, that's why I bought this type

  Hello

  -reactivate the ip Routing:

  config t

  IP routing

  -As Paolo said if you want to use the ethernet and wireless, you will have to fill:

  Bridge Protocol ieee 1

  Bridge IRB

  1 channel ip bridge

  int bvi1

  IP add 192.168.2.3 255.255.255.0

  int vlan 1

  Bridge-Group 1

  Concerning

  Alain

  Remember messages useful rate.