DHCP & Pix 501

I currently use a Pix 501 in a SOHO environment with a DSL to non-static. I configured the IP address correctly - outside setroute dhcp ip address. The problem lies in my access lists and static routes. Is there a way to have the pix automatically update these when outside IP changes? Areas of distress are...

access-list 101 permit tcp any host xxx.xxx.xxx.xxx eq smtp

acl_out list access permit tcp any host xxx.xxx.xxx.xxx eq smtp

static (inside, outside) tcp xxx.xxx.xxx.xxx, smtp smtp 10.10.10.1 netmask 255.255.255.255 0 0

where xxx.xxx.xxx.xxx is the external IP address. I feel, updated the pix per day will be necessary to take account the ISP change IP, but it would be great if it wasn't!

Thanks in advance.

-Brian

You can use the keyword "interface" in the access lists and static, which will automatically use whatever the IP address is on this interface. In your example, it would be:

access-list 101 permit tcp any interface outside eq smtp

acl_out tcp allowed access list any interface outside eq smtp

public static tcp (indoor, outdoor) interface smtp 10.10.10.1 netmask 255.255.255.255 smtp

Note You must run 6.3 (3) code to get this option, the new code is available here:

http://www.Cisco.com/cgi-bin/tablebuild.pl/PIX

Note also you need not specify the interface name in the static statement, which is the interface name in the materials gleaned.

Tags: Cisco Security

Similar Questions

Can add more than 2 DNS setting DHCP PIX 501?

I would ask that can add more than 2 DNS DHCP PIX 501 framework? If so, how? I need to add two external DNS and DNS internal to my DHCP clients.

Thanks for help.

PIX only supports 2 DNS and WINS for dhcp clients

I hope that helps... Rate if he does!

Pix 501 connection problems

I am very new to cisco equipment and I was wondering if someone could help me with this (probably very simple question).

When connecting to my pix via the browser (https://192.168.1.1/startup.html), the browser never took the start screen with the message that says "loading, please wait." This leads me to believe that the firewall is rejecting connections from my machine (which uses dhcp to get an ip address of the pix).

To work around this problem, I tried to connect to the CLI using hyperterminal. I can connect and run a few basic commands as 'show version', but cannot log on as a user with permissions.

If the web interface has a default connection of void & empty, surely the cli should be the same?

Is anyone able to tell me what is the default login, so that I can start confguring the pix via the cli?

Thanks in advance.

Justin Spencer.

Please see below for info pix:

Cisco PIX Firewall Version 6.3 (3)

Cisco PIX Device Manager Version 3.0 (1)

Updated Thursday, August 13 03 13:55 by Manu

pixfirewall until 12 minutes 18 seconds

Material: PIX - 501, 16 MB RAM, 133 MHz Am5x86 CPU

Flash E28F640J3 @ 0 x 3000000, 8 MB

BIOS Flash E28F640J3 @ 0xfffd8000, 128KB

0: ethernet0: the address is 0011.937e.0486, irq 9

1: ethernet1: the address is 0011.937e.0487, irq 10

Features licensed:

Failover: disabled

VPN - A: enabled

VPN-3DES-AES: enabled

The maximum physical Interfaces: 2

Maximum Interfaces: 2

Cut - through Proxy: enabled

Guardians: enabled

URL filtering: enabled

Internal guests: 10

Throughput: unlimited

Peer IKE: 10

This PIX has a restricted license (R).

Serial number: 808301473 (0x302db3a1)

Activation key running: 0xb53be54d 0x26da18f9 0xb2b78cef 0x8fe1abb6

Configuration changed from enable_1 to 15:36:42.554 UTC, Monday, November 8, 2004

pixfirewall >

long live java.

Please this mark as resolved, others won't waste time.

Thank you

Port Fowarding PIX 501

Is it possible to forward port 80 to internal ip on a PIX 501?

I have a PIX 501, which made PAT / internal DHCP for my network. I want to forward all queries [80] http to an internal web server.

Thank you

Sepyh...

You can use port forwarding to get there.

Here is an example configuration:

http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_tech_note09186a0080094aad.shtml#port

Hope this helps,

-Nairi

PIX 501 for Cisco 3640 VPN router

-Start ciscomoderator note - the following message has been changed to remove potentially sensitive information. Please refrain from publishing confidential information about the site to reduce the risk to the security of your network. -end of the note ciscomoderator-

Have a 501 PIX and Cisco 3640 router. The 3640 is configured for dynamic map for VPN. The PIX 501 is set to pointing to the 3640 router static map. I can establish a tunnel linking the PIX to the router and telnet to a machine AIX on the inside network to the router. When I try to print on the network of the PIX 501 inside it fails.

What Miss me? I added the configuration for the PIX and the router.

Here are the PIX config:

PIX Version 6.1 (1)

ethernet0 nameif outside security0

nameif ethernet1 inside the security100

enable encrypted password xxxxxxxxxxxxxxxx

xxxxxxxxxxxxx encrypted passwd

pixfirewall hostname

fixup protocol ftp 21

fixup protocol http 80

fixup protocol h323 1720

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol sip 5060

fixup protocol 2000 skinny

names of

pager lines 24

interface ethernet0 10baset

interface ethernet1 10full

Outside 1500 MTU

Within 1500 MTU

IP address outside dhcp setroute

IP address inside 192.168.1.1 255.255.255.0

alarm action IP verification of information

alarm action attack IP audit

PDM logging 100 information

history of PDM activate

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

Timeout xlate 0:05:00

Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00

Timeout, uauth 0:05:00 absolute

GANYMEDE + Protocol Ganymede + AAA-server

RADIUS Protocol RADIUS AAA server

Enable http server

http 192.168.1.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

SNMP-Server Community public

No trap to activate snmp Server

enable floodguard

No sysopt route dnat

Telnet timeout 5

SSH timeout 5

dhcpd address 192.168.1.2 - 192.168.1.33 inside

dhcpd lease 3600

dhcpd ping_timeout 750

dhcpd outside auto_config

dhcpd allow inside

Terminal width 80

Cryptochecksum:XXXXXXXXXXXXXXXXXXX

: end

Here is the router config

Router #sh runn

Building configuration...

Current configuration: 6500 bytes

!

version 12.2

no service button

tcp KeepAlive-component snap-in service

a tcp-KeepAlive-quick service

horodateurs service debug datetime localtime

Log service timestamps datetime localtime

no password encryption service

!

router host name

!

start the flash slot1:c3640 - ik9o3s - mz.122 - 16.bin system

queue logging limit 100

activate the password xxxxxxxxxxxxxxxxx

!

clock TimeZone Central - 6

clock summer-time recurring CENTRAL

IP subnet zero

no ip source route

!

!

no ip domain-lookup

!

no ip bootp Server

inspect the name smtp Internet IP

inspect the name Internet ftp IP

inspect the name Internet tftp IP

inspect the IP udp Internet name

inspect the tcp IP Internet name

inspect the name DMZ smtp IP

inspect the name ftp DMZ IP

inspect the name DMZ tftp IP

inspect the name DMZ udp IP

inspect the name DMZ tcp IP

audit of IP notify Journal

Max-events of po verification IP 100

!

crypto ISAKMP policy 1

BA 3des

preshared authentication

Group 2

!

crypto ISAKMP policy 20

BA 3des

preshared authentication

Group 2

ISAKMP crypto key address x.x.180.133 xxxxxxxxxxx

ISAKMP crypto keys xxxxxxxxxxx address 0.0.0.0 0.0.0.0

!

!

Crypto ipsec transform-set esp-3des esp-sha-hmac vpn test

Crypto ipsec transform-set esp-3des esp-sha-hmac PIXRMT

!

dynamic-map crypto dny - Sai 25

game of transformation-PIXRMT

match static address PIX1

!

!

static-card 10 map ipsec-isakmp crypto

the value of x.x.180.133 peer

the transform-set vpn-test value

match static address of Hunt

!

map ISCMAP 15-isakmp ipsec crypto dynamic dny - isc

!

call the rsvp-sync

!

!

!

controller T1 0/0

framing ESF

linecode b8zs

Slots 1-12 channels-group 0 64 speed

Description controller to the remote frame relay

!

controller T1 0/1

framing ESF

linecode b8zs

Timeslots 1-24 of channel-group 0 64 speed

Description controller for internet link SBIS

!

interface Serial0/0:0

Description CKT ID 14.HXGK.785129 Frame Relay to Remote Sites

bandwidth 768

no ip address

no ip redirection

no ip unreachable

no ip proxy-arp

encapsulation frame-relay

frame-relay lmi-type ansi

!

interface Serial0 / point to point 0:0.17

Description Frame Relay to xxxxxxxxxxx location

IP unnumbered Ethernet1/0

no ip redirection

no ip unreachable

no ip proxy-arp

IP nat inside

No arp frame relay

dlci 17 frame relay interface

!

interface Serial0 / point to point 0:0.18

Description Frame Relay to xxxxxxxxxxx location

IP unnumbered Ethernet1/0

no ip redirection

no ip unreachable

no ip proxy-arp

IP nat inside

No arp frame relay

dlci 18 frame relay interface

!

interface Serial0 / point to point 0:0.19

Description Frame Relay to xxxxxxxxxxx location

IP unnumbered Ethernet1/0

no ip redirection

no ip unreachable

no ip proxy-arp

IP nat inside

No arp frame relay

dlci 19 frame relay interface

!

interface Serial0 / point to point 0:0.20

Description Frame Relay to xxxxxxxxxxxxx location

IP unnumbered Ethernet1/0

no ip redirection

no ip unreachable

no ip proxy-arp

IP nat inside

No arp frame relay

dlci 20 frame relay interface

!

interface Serial0 / point to point 0:0.21

Description Frame Relay to xxxxxxxxxxxx

IP unnumbered Ethernet1/0

no ip redirection

no ip unreachable

no ip proxy-arp

IP nat inside

No arp frame relay

dlci 21 frame relay interface

!

interface Serial0 / point to point 0:0.101

Description Frame Relay to xxxxxxxxxxx

IP unnumbered Ethernet1/0

no ip redirection

no ip unreachable

no ip proxy-arp

IP nat inside

No arp frame relay

dlci 101 frame relay interface

!

interface Serial0/1:0

CKT ID 14.HCGS.785383 T1 to ITT description

bandwidth 1536

IP address x.x.76.14 255.255.255.252

no ip redirection

no ip unreachable

no ip proxy-arp

NAT outside IP

inspect the Internet IP on

no ip route cache

card crypto ISCMAP

!

interface Ethernet1/0

IP 10.1.1.1 255.255.0.0

no ip redirection

no ip unreachable

no ip proxy-arp

IP nat inside

no ip route cache

no ip mroute-cache

Half duplex

!

interface Ethernet2/0

IP 10.100.1.1 255.255.0.0

no ip redirection

no ip unreachable

no ip proxy-arp

IP nat inside

no ip route cache

no ip mroute-cache

Half duplex

!

router RIP

10.0.0.0 network

network 192.168.1.0

!

IP nat inside source list 112 interface Serial0/1: 0 overload

IP nat inside source static tcp 10.1.3.4 443 209.184.71.138 443 extensible

IP nat inside source static tcp 10.1.3.4 9869 209.184.71.138 9869 extensible

IP nat inside source 10.1.3.2 static 209.184.71.140

IP nat inside source static 10.1.3.6 209.184.71.139

IP nat inside source static 10.1.3.8 209.184.71.136

IP nat inside source static tcp 10.1.3.10 80 209.184.71.137 80 extensible

IP classless

IP route 0.0.0.0 0.0.0.0 x.x.76.13

IP route 10.2.0.0 255.255.0.0 Serial0 / 0:0.19

IP route 10.3.0.0 255.255.0.0 Serial0 / 0:0.18

IP route 10.4.0.0 255.255.0.0 Serial0 / 0:0.17

IP route 10.5.0.0 255.255.0.0 Serial0 / 0:0.20

IP route 10.6.0.0 255.255.0.0 Serial0 / 0:0.21

IP route 10.7.0.0 255.255.0.0 Serial0 / 0:0.101

no ip address of the http server

!

!

PIX1 static extended IP access list

IP 10.1.0.0 allow 0.0.255.255 192.168.1.0 0.0.0.255

IP access-list extended hunting-static

IP 10.1.0.0 allow 0.0.255.255 192.168.1.0 0.0.0.255

extended IP access vpn-static list

ip permit 192.168.1.0 0.0.0.255 10.1.0.0 0.0.255.255

IP 192.0.0.0 allow 0.255.255.255 10.1.0.0 0.0.255.255

access-list 1 refuse 10.0.0.0 0.255.255.255

access-list 1 permit one

access-list 12 refuse 10.1.3.2

access-list 12 allow 10.1.0.0 0.0.255.255

access-list 12 allow 10.2.0.0 0.0.255.255

access-list 12 allow 10.3.0.0 0.0.255.255

access-list 12 allow 10.4.0.0 0.0.255.255

access-list 12 allow 10.5.0.0 0.0.255.255

access-list 12 allow 10.6.0.0 0.0.255.255

access-list 12 allow 10.7.0.0 0.0.255.255

access-list 112 deny ip host 10.1.3.2 everything

access-list 112 refuse ip 10.1.0.0 0.0.255.255 192.168.1.0 0.0.0.255

access-list 112 allow ip 10.1.0.0 0.0.255.255 everything

access-list 112 allow ip 10.2.0.0 0.0.255.255 everything

access-list 112 allow ip 10.3.0.0 0.0.255.255 everything

access-list 112 allow ip 10.4.0.0 0.0.255.255 everything

access-list 112 allow ip 10.5.0.0 0.0.255.255 everything

access-list 112 allow ip 10.6.0.0 0.0.255.255 everything

access-list 112 allow ip 10.7.0.0 0.0.255.255 everything

access-list 120 allow ip host 10.100.1.10 10.1.3.7

not run cdp

!

Dial-peer cor custom

!

!

!

!

connection of the banner ^ CCC

******************************************************************

WARNING - Unauthorized USE strictly PROHIBITED!

******************************************************************

^ C

!

Line con 0

line to 0

password xxxxxxxxxxxx

local connection

Modem InOut

StopBits 1

FlowControl hardware

line vty 0 4

exec-timeout 15 0

password xxxxxxxxxxxxxx

opening of session

!

end

Router #.

Add the following to the PIX:

> permitted connection ipsec sysopt

This indicates the PIX around all ACLs for IPsec traffic. Now that your IPSec traffic is still subject to the standard rules of PIX, so launched inside the traffic is allowed to go in, but off-initiated traffic is not.

Place a FIOS for VPN router behind PIX 501

I have a Verizon FIOS internet connection and one of their routers wide wireless broadband, and this is a configuration of base completely... their router DHCP and firewalls, and the connection has a dynamic address. I would put the PIX 501 behind the Verizon router as one of its clients and make the VPN PIX of other PIX 501 at other locations, such as my entire network has access to remote networks.

Is this possible, and if yes, any who could some suggest configurations (how to address internal and external, static routes ports that may be required somewhere, etc.)?

Thanks for any help.

When installing my FiOS, I had already asked that it be installed on the Ethernet cable. Don't know they need to do something for you to spend the coax to Ethernet.

The best way to test it would be to find the Media Converter (follow the coaxial cable between your FiOS router to the demarc and there should be a box with a coaxial port, some phone Sockets and an Ethernet port). If you unplug the coaxial cable and plug a laptop computer on the Ethernet port, see if your laptop takes a public IP address. If Yes, then you just have to run to your PIX501 Ethernet cable and you should be ready.

Just to note that Verizon, according to your region, reserved DHCP assignments. This means that you may need to call Verizon and ask them to release the previous assignment of DHCP-MAC addresses. I had this happen recently. They must release the assignment then your PIX will pull a new IP address and they will book your new IP - MAC address assignment. They do this to speed up the connection to a cold start time on the router.

Basically, they are filtering by MAC address, but rather through a sticky ARP where they clear the entry, and then the next device that connects records his MAC address and then only that device is permitted to connect to this leg of the cable. So there is a bit of work you have to do, but the most difficult part would be sitting on hold waiting for a tech, if you call to Verizon.

Pix 501 problem

I can not configure a pix 501 as a firewall, I need to know if it comes with a default configuration. I connect the PIX of the LAN and it start´s to DHCP each machine on the network with no problem, but none of the user´s can access the internet.

I need to know what to do to get access to internet protection and network security.

Where can I go to configure the Pix, if I really need to configure it!

Hi... basically, you need the following basic steps to access your internal users to the internet

If you use 6.3 (5) PIX

interface ethernet0 100full

interface ethernet1 100full

ethernet0 nameif outside security0

nameif ethernet1 inside the security100

inside_access_in ip access list allow a whole

inside_access_in access to the interface inside group

NAT (inside) 1 access-list inside_access_in

Global 1 interface (outside)

NOTE: with the config ablove room your internal users will have FULL access to the internet. If you want to restrict access to only http, https, ftp, dns, etc then you need to change the access list for something like that...

inside_access_in list access permit tcp any any eq www

inside_access_in list access permit tcp any any eq 443

inside_access_in list access permit tcp any any eq ftp

inside_access_in list access permit tcp any any eq 53

inside_access_in udd allowed access list any any eq 53

I hope that helps... Rate if he does!

Customer Cisco PIX 501 VPN connects but no connection to the local network

Hi all:

I am able to make a VPN connection to a PIX 501. The remote client is assigned an IP (192.168.2.1) also, but not able to access all the machines in the local network connected to the PIX.

I have attached the PIX configuration.

Advice will be greatly appreciated.

********************

6.3 (5) PIX version

interface ethernet0 car

interface ethernet1 100full

ethernet0 nameif outside security0

nameif ethernet1 inside the security100

enable password xxxx

passwd xxxxx

pixfirewall hostname

domain ciscopix.com

fixup protocol dns-length maximum 512

fixup protocol ftp 21

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol http 80

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol sip 5060

fixup protocol sip udp 5060

fixup protocol 2000 skinny

fixup protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol tftp 69

names of

access-list 101 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0

access-list 102 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0

pager lines 24

Outside 1500 MTU

Within 1500 MTU

IP address outside dhcp setroute

IP address inside 192.168.1.1 255.255.255.0

alarm action IP verification of information

alarm action attack IP audit

IP local pool ippool 192.168.2.1 - 192.168.2.5

location of PDM 192.168.2.0 255.255.255.0 outside

PDM logging 100 information

history of PDM activate

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) - 0 102 access list

NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

Timeout xlate 0:05:00

Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00

Timeout, uauth 0:05:00 absolute

GANYMEDE + Protocol Ganymede + AAA-server

AAA-server GANYMEDE + 3 max-failed-attempts

AAA-server GANYMEDE + deadtime 10

RADIUS Protocol RADIUS AAA server

AAA-server RADIUS 3 max-failed-attempts

AAA-RADIUS deadtime 10 Server

AAA-server local LOCAL Protocol

Enable http server

http 192.168.1.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

SNMP-Server Community public

No trap to activate snmp Server

enable floodguard

Permitted connection ipsec sysopt

Crypto ipsec transform-set esp - esp-md5-hmac RIGHT

Crypto-map dynamic dynmap 10 transform-set RIGHT

map mymap 10-isakmp ipsec crypto dynamic dynmap

mymap outside crypto map interface

ISAKMP allows outside

ISAKMP identity address

part of pre authentication ISAKMP policy 10

encryption of ISAKMP policy 10

ISAKMP policy 10 md5 hash

10 2 ISAKMP policy group

ISAKMP life duration strategy 10 86400

vpngroup vpn3000 ippool address pool

vpngroup vpn3000 Server dns 68.87.72.130

vpngroup vpn3000-wins 192.168.1.100 Server

vpngroup vpn3000 split tunnel 101

vpngroup vpn3000 downtime 1800

password vpngroup vpn3000 *.

Telnet timeout 5

SSH timeout 5

Console timeout 0

dhcpd address 192.168.1.2 - 192.168.1.33 inside

dhcpd lease 3600

dhcpd ping_timeout 750

dhcpd outside auto_config

dhcpd allow inside

Terminal width 80

Cryptochecksum:xxxx

****************

The DNS server is the one assigned to me by my ISP.

My internal network connected to the PIX is 192.168.1.1 - 192.168.1.33 and the VPN ip pool is 192.168.2.1 - 192.168.2.5

"isakmp nat-traversal 20" can do the trick.

Pix 501 for Small Business SERVER 2003 configuration problems

I am new to cisco equipment. My company recently purchased a firewall of Pix 501 unlimited number of users, it is connected to an internet connection by cable with a dynamic ip address. Internet works fine and so the dhcp server.

I have a Windows 2003 Small Business Server on our network. I need to configure the firewall to forward ports on the SBS server for remote web workplace.

Also about a week ago I lost connectivity to the GUI of PDM via my web browser. Telnet and console work perfectly well.

I enclose my config file.

Any help will be appreciated. Thank you

Ed

FIRT off, you do not have a group-access instruction set for one of your ACL. This means that you have blocked all inbound traffic. You also have your incorrect static instructions. You can start by cleaning your config and enter the correct commands, you should be able to stick to your firewall config mode:

No list will host 192.168.1.1 acl-enabled access 192.168.1.1

no access list acl_outside not allowed tcp any any eq www

no access list acl_inside not allowed tcp any any eq www

no access list no incoming icmp permitted any one

No list of permitted no inbound tcp access any host 24.50.241.113 eq https

No list to access acl - permit gre 192.168.1.1 host 192.168.1.1

No outside_in not allowed access list tcp any host 24.50.241.113 eq www

not static (inside, outside) tcp interface www SBSServer www netmask 255.255.255.255 0 0

not static (inside, outside) tcp interface https SBSServer https netmask 255.255.255.255 0 0

not static tcp (exterior, Interior) interface www SBSServer www netmask 255.255.255.255 0 0

not static tcp (exterior, Interior) interface https SBSServer https netmask 255.255.255.255 0 0

static (inside, outside) tcp 24.50.241.113 80 192.168.1.69 80 netmask 255.255.255.255 0 0

static (inside, outside) 24.50.241.113 tcp 443 192.168.1.69 443 netmask 255.255.255.255 0 0

access-list OUT-IN permit tcp any host 24.50.241.113 eq https

access-list OUT-IN permit tcp any host 24.50.241.113 eq www

allow to Access-list OUT-IN a whole icmp

Access-group OUT-IN in interface outside

What ip you are trying to access your pdm of? the looks of configuration http correct, unless your coming to one other than 192.168.1.x ip address

Let me know if it works

Connectivity random Cisco Pix 501

Hello. I'm having some trouble with my CISCO PIX 501 Setup.

A few months I started having random disconnects on my network (from inside to outside). The machines can ping the DC or the Pix, but impossible to surf the internet. The only way to make them go outside is a reboot of Pix.

My configuration is:

-----------

See the ACE - pix config (config) #.
: Saved
: Written by enable_15 at 09:23:07.033 UTC Tuesday, June 3, 2014
6.3 (3) version PIX
interface ethernet0 car
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate 8Ry34retyt7RR564 encrypted password
2fvbbfgdI.2KUOU encrypted passwd
hostname as pix
domain as.local
fixup protocol dns-length maximum 512
fixup protocol esp-ike
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol pptp 1723
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list acl_out permit icmp any one
ip access list acl_out permit a whole
access-list acl_out permit tcp any one
Allow Access-list outside_access_in esp a whole
outside_access_in list access permit udp any eq isakmp everything
outside_access_in list of access permit udp any eq 1701 all
outside_access_in list of access permit udp any eq 4500 all
outside_access_in ip access list allow a whole
pager lines 24
Outside 1500 MTU
Within 1500 MTU
outside 10.10.10.2 IP address 255.255.255.0
IP address inside 192.168.100.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
history of PDM activate
ARP timeout 14400
Global 1 10.10.10.8 - 10.10.10.254 (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Access-group outside_access_in in interface outside
access to the interface inside group acl_out
Route outside 0.0.0.0 0.0.0.0 10.10.10.1 0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.10.2 255.255.255.255 inside
http 192.168.10.101 255.255.255.255 inside
http 192.168.100.2 255.255.255.255 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
ISAKMP nat-traversal 20
Telnet timeout 5
SSH 192.168.10.101 255.255.255.255 inside
SSH timeout 60
Console timeout 0
dhcpd dns 8.8.8.8 8.8.4.4
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
Terminal width 80
Cryptochecksum:7f9bda5e534eaeb1328ab08a3c4d28a
------------

Do you have any advice? I don't get what's wrong with my setup.

My DC is 192.168.100.2 and the network mask is 255.255.255.0

The network configuration is configured to set the IP of the gateway to 192.168.100.1 (i.e. the PIX 501).

I have about 50 + peers on the internal network.

Any help is apprecciate.

Hello

You have a license for 50 users +?

After the release of - Show version

RES

Paul

Adding a pix 501 VPN 2

Hello.. I am beginner in this kind of things cisco...

I'm trying to set up multiple VPN on a Cisco PIX 501 firewall with routers Linksys BEFVP41...

Since not very familiar with the CLI, I use the PDM utility and it was very easy for the first... Unfortunately, I get this error when I try to add the second VPN using the VPN Wizard:

Outside_map map (ERR) crypto set peer 200.20.10.3

WARNING: This encryption card is incomplete

To remedy the situation even and a list of valid to add this encryption card

Hi garcia

for each vpn/peer, you need to a separate instance of crypto card, the card will have the same name, but different sequence... numbers one map encryption can be attributed to an interface, but you can have several instance of cards inside a main...

for configuration, you can go through the URL below... It has all the details on IPSEC config:

http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/PIX/pix_sw/v_63/config/ipsecint.htm

I hope this helps... all the best... the rate of responses if deemed useful...

REDA

Microsoft secondary authority w / Cisco router / PIX 501

I'm trying to get digital certificates to work on my 2621XM router. I have also

need to put in place on the three firewalls PIX 501 but who have not obtained until now still. I have

don't have no access to the CA root, but it could bring in line if I had to. I have

have a stand-alone Microsoft subordinate CA that I want to use to publish all

certificates.

Is it possible, as well with the router and the firewall? If so, what version

the IOS do I need? I installed the add-on CEP at HQ. I can't

It works and I'm starting to wonder if it is still possible. If this doesn't

work, how can I make it work? I have all the documents that Cisco has combed

on the subject and have gotten nowhere.

Any help would be greatly appreciated. Thank you.

Jennnette,

I sent this document, let me know how it goes or if you have any questions.

Kurtis Durrett

PIX 501 Logging

I would like to open a session of hacking and intrusion of the attacks through a PIX 501 with a connection to broadband in a Home Office Setup. I have the camera upwards and the race and I am currently Setup with the Kiwi Syslog Dameon. What would be my best approach Logging all relevant information with the load to the bottom of the unit? Any suggestions / tips would be appreciated.

Thank you

It is a common logging configuration that I use:

opening of session

timestamp of the record

logging trap information

host of logging inside x.x.x.x

No registration message 106015

No message logging 106007

No message logging 105003

No registration message 105004

No message recording 309002

No message logging 305012

No registration message 305011

No message logging 303002

No message logging 111008

No message logging 302015

No message recording 302014

No message logging 302013

No registration message 304001

No message logging 111005

No message logging 609002

No message recording 609001

No message logging 302016

I usually do not enable the logging buffer (never use connection console it will affect performance) because it's not the messages timestamp (it only timestamps in the syslog). But the PIX loaded down with the load, you and Kiwi you before the PIX don't.

Also turn on the IDs on the PIX.

It will be useful.

Steve

Configure the PIX 501 for IDS

I have a PIX 501 with wired high-speed LAN headquarters inside and outside. Which would be a solid policy IDS to enable and what interfaces it must be applied to? There will be other measures necessary to enable IDS?

IDS on the PIX itself is very limited, it checks only 59 signatures listed here (http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmdref/gl.htm#xtocid9 under the section of signatures supported IDS). The signatures themselves are pretty basic.

If you do not want to activate this, then for the signatures of attacks I would fix for drop/alarm/reset action, which is the default anyway.

You will also need to set the logging to a syslog server and monitoring for any 4000nn messages in syslog, cause it event IDS.

PIX 501, 1 static IP, IP address dynamic 2. Mesh full possible?

I have 3 sites. All sites have PIX 501. Central site has a static IP, 2 remote sites a dynamic IP.

I have no problem with the connection to the central site by using their dynamic IP address in a remote star connection.

Is it possible for 2 remote sites communicate? There is data that must be transferred between remote sites. I read somewhere in cisco site web which its possible via mesh on request.

Does anyone have an example of configuration on a VPN Site to Site where the Central site has static IP and remote sites with a dynamic IP? Remote locations teaches a dynamic IP from remote sites to the central server.

Thank you.

With IOS as your hub and then the Yes rays, the rays can learn dynamically address other departments using the PNDH. This type of configuration is called Dynamic Multipoint VPN (DMVPN), you can read everything you need to know about this here:

http://www.Cisco.com/warp/public/105/DMVPN.html

Even with EzVPN (not DMVPN) the rays will not learn the address of other rays, all communication is always via the hub. Call another talks would work, but as I said, the packages will talk-star.

DHCP &amp; Pix 501

Similar Questions

Maybe you are looking for

DHCP & Pix 501