Microsoft secondary authority w / Cisco router / PIX 501
I'm trying to get digital certificates to work on my 2621XM router. I have also
need to put in place on the three firewalls PIX 501 but who have not obtained until now still. I have
don't have no access to the CA root, but it could bring in line if I had to. I have
have a stand-alone Microsoft subordinate CA that I want to use to publish all
certificates.
Is it possible, as well with the router and the firewall? If so, what version
the IOS do I need? I installed the add-on CEP at HQ. I can't
It works and I'm starting to wonder if it is still possible. If this doesn't
work, how can I make it work? I have all the documents that Cisco has combed
on the subject and have gotten nowhere.
Any help would be greatly appreciated. Thank you.
Jennnette,
I sent this document, let me know how it goes or if you have any questions.
Kurtis Durrett
Tags: Cisco Security
Similar Questions
-
PIX 501 for Cisco 3640 VPN router
-Start ciscomoderator note - the following message has been changed to remove potentially sensitive information. Please refrain from publishing confidential information about the site to reduce the risk to the security of your network. -end of the note ciscomoderator-
Have a 501 PIX and Cisco 3640 router. The 3640 is configured for dynamic map for VPN. The PIX 501 is set to pointing to the 3640 router static map. I can establish a tunnel linking the PIX to the router and telnet to a machine AIX on the inside network to the router. When I try to print on the network of the PIX 501 inside it fails.
What Miss me? I added the configuration for the PIX and the router.
Here are the PIX config:
PIX Version 6.1 (1)
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
enable encrypted password xxxxxxxxxxxxxxxx
xxxxxxxxxxxxx encrypted passwd
pixfirewall hostname
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 1720
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol 2000 skinny
names of
pager lines 24
interface ethernet0 10baset
interface ethernet1 10full
Outside 1500 MTU
Within 1500 MTU
IP address outside dhcp setroute
IP address inside 192.168.1.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
No sysopt route dnat
Telnet timeout 5
SSH timeout 5
dhcpd address 192.168.1.2 - 192.168.1.33 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
dhcpd allow inside
Terminal width 80
Cryptochecksum:XXXXXXXXXXXXXXXXXXX
: end
Here is the router config
Router #sh runn
Building configuration...
Current configuration: 6500 bytes
!
version 12.2
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug datetime localtime
Log service timestamps datetime localtime
no password encryption service
!
router host name
!
start the flash slot1:c3640 - ik9o3s - mz.122 - 16.bin system
queue logging limit 100
activate the password xxxxxxxxxxxxxxxxx
!
clock TimeZone Central - 6
clock summer-time recurring CENTRAL
IP subnet zero
no ip source route
!
!
no ip domain-lookup
!
no ip bootp Server
inspect the name smtp Internet IP
inspect the name Internet ftp IP
inspect the name Internet tftp IP
inspect the IP udp Internet name
inspect the tcp IP Internet name
inspect the name DMZ smtp IP
inspect the name ftp DMZ IP
inspect the name DMZ tftp IP
inspect the name DMZ udp IP
inspect the name DMZ tcp IP
audit of IP notify Journal
Max-events of po verification IP 100
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 20
BA 3des
preshared authentication
Group 2
ISAKMP crypto key address x.x.180.133 xxxxxxxxxxx
ISAKMP crypto keys xxxxxxxxxxx address 0.0.0.0 0.0.0.0
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac vpn test
Crypto ipsec transform-set esp-3des esp-sha-hmac PIXRMT
!
dynamic-map crypto dny - Sai 25
game of transformation-PIXRMT
match static address PIX1
!
!
static-card 10 map ipsec-isakmp crypto
the value of x.x.180.133 peer
the transform-set vpn-test value
match static address of Hunt
!
map ISCMAP 15-isakmp ipsec crypto dynamic dny - isc
!
call the rsvp-sync
!
!
!
controller T1 0/0
framing ESF
linecode b8zs
Slots 1-12 channels-group 0 64 speed
Description controller to the remote frame relay
!
controller T1 0/1
framing ESF
linecode b8zs
Timeslots 1-24 of channel-group 0 64 speed
Description controller for internet link SBIS
!
interface Serial0/0:0
Description CKT ID 14.HXGK.785129 Frame Relay to Remote Sites
bandwidth 768
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
encapsulation frame-relay
frame-relay lmi-type ansi
!
interface Serial0 / point to point 0:0.17
Description Frame Relay to xxxxxxxxxxx location
IP unnumbered Ethernet1/0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
No arp frame relay
dlci 17 frame relay interface
!
interface Serial0 / point to point 0:0.18
Description Frame Relay to xxxxxxxxxxx location
IP unnumbered Ethernet1/0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
No arp frame relay
dlci 18 frame relay interface
!
interface Serial0 / point to point 0:0.19
Description Frame Relay to xxxxxxxxxxx location
IP unnumbered Ethernet1/0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
No arp frame relay
dlci 19 frame relay interface
!
interface Serial0 / point to point 0:0.20
Description Frame Relay to xxxxxxxxxxxxx location
IP unnumbered Ethernet1/0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
No arp frame relay
dlci 20 frame relay interface
!
interface Serial0 / point to point 0:0.21
Description Frame Relay to xxxxxxxxxxxx
IP unnumbered Ethernet1/0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
No arp frame relay
dlci 21 frame relay interface
!
interface Serial0 / point to point 0:0.101
Description Frame Relay to xxxxxxxxxxx
IP unnumbered Ethernet1/0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
No arp frame relay
dlci 101 frame relay interface
!
interface Serial0/1:0
CKT ID 14.HCGS.785383 T1 to ITT description
bandwidth 1536
IP address x.x.76.14 255.255.255.252
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
inspect the Internet IP on
no ip route cache
card crypto ISCMAP
!
interface Ethernet1/0
IP 10.1.1.1 255.255.0.0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
no ip route cache
no ip mroute-cache
Half duplex
!
interface Ethernet2/0
IP 10.100.1.1 255.255.0.0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
no ip route cache
no ip mroute-cache
Half duplex
!
router RIP
10.0.0.0 network
network 192.168.1.0
!
IP nat inside source list 112 interface Serial0/1: 0 overload
IP nat inside source static tcp 10.1.3.4 443 209.184.71.138 443 extensible
IP nat inside source static tcp 10.1.3.4 9869 209.184.71.138 9869 extensible
IP nat inside source 10.1.3.2 static 209.184.71.140
IP nat inside source static 10.1.3.6 209.184.71.139
IP nat inside source static 10.1.3.8 209.184.71.136
IP nat inside source static tcp 10.1.3.10 80 209.184.71.137 80 extensible
IP classless
IP route 0.0.0.0 0.0.0.0 x.x.76.13
IP route 10.2.0.0 255.255.0.0 Serial0 / 0:0.19
IP route 10.3.0.0 255.255.0.0 Serial0 / 0:0.18
IP route 10.4.0.0 255.255.0.0 Serial0 / 0:0.17
IP route 10.5.0.0 255.255.0.0 Serial0 / 0:0.20
IP route 10.6.0.0 255.255.0.0 Serial0 / 0:0.21
IP route 10.7.0.0 255.255.0.0 Serial0 / 0:0.101
no ip address of the http server
!
!
PIX1 static extended IP access list
IP 10.1.0.0 allow 0.0.255.255 192.168.1.0 0.0.0.255
IP access-list extended hunting-static
IP 10.1.0.0 allow 0.0.255.255 192.168.1.0 0.0.0.255
extended IP access vpn-static list
ip permit 192.168.1.0 0.0.0.255 10.1.0.0 0.0.255.255
IP 192.0.0.0 allow 0.255.255.255 10.1.0.0 0.0.255.255
access-list 1 refuse 10.0.0.0 0.255.255.255
access-list 1 permit one
access-list 12 refuse 10.1.3.2
access-list 12 allow 10.1.0.0 0.0.255.255
access-list 12 allow 10.2.0.0 0.0.255.255
access-list 12 allow 10.3.0.0 0.0.255.255
access-list 12 allow 10.4.0.0 0.0.255.255
access-list 12 allow 10.5.0.0 0.0.255.255
access-list 12 allow 10.6.0.0 0.0.255.255
access-list 12 allow 10.7.0.0 0.0.255.255
access-list 112 deny ip host 10.1.3.2 everything
access-list 112 refuse ip 10.1.0.0 0.0.255.255 192.168.1.0 0.0.0.255
access-list 112 allow ip 10.1.0.0 0.0.255.255 everything
access-list 112 allow ip 10.2.0.0 0.0.255.255 everything
access-list 112 allow ip 10.3.0.0 0.0.255.255 everything
access-list 112 allow ip 10.4.0.0 0.0.255.255 everything
access-list 112 allow ip 10.5.0.0 0.0.255.255 everything
access-list 112 allow ip 10.6.0.0 0.0.255.255 everything
access-list 112 allow ip 10.7.0.0 0.0.255.255 everything
access-list 120 allow ip host 10.100.1.10 10.1.3.7
not run cdp
!
Dial-peer cor custom
!
!
!
!
connection of the banner ^ CCC
******************************************************************
WARNING - Unauthorized USE strictly PROHIBITED!
******************************************************************
^ C
!
Line con 0
line to 0
password xxxxxxxxxxxx
local connection
Modem InOut
StopBits 1
FlowControl hardware
line vty 0 4
exec-timeout 15 0
password xxxxxxxxxxxxxx
opening of session
!
end
Router #.
Add the following to the PIX:
> permitted connection ipsec sysopt
This indicates the PIX around all ACLs for IPsec traffic. Now that your IPSec traffic is still subject to the standard rules of PIX, so launched inside the traffic is allowed to go in, but off-initiated traffic is not.
-
Connectivity random Cisco Pix 501
Hello. I'm having some trouble with my CISCO PIX 501 Setup.
A few months I started having random disconnects on my network (from inside to outside). The machines can ping the DC or the Pix, but impossible to surf the internet. The only way to make them go outside is a reboot of Pix.
My configuration is:
-----------
See the ACE - pix config (config) #.
: Saved
: Written by enable_15 at 09:23:07.033 UTC Tuesday, June 3, 2014
6.3 (3) version PIX
interface ethernet0 car
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate 8Ry34retyt7RR564 encrypted password
2fvbbfgdI.2KUOU encrypted passwd
hostname as pix
domain as.local
fixup protocol dns-length maximum 512
fixup protocol esp-ike
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol pptp 1723
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list acl_out permit icmp any one
ip access list acl_out permit a whole
access-list acl_out permit tcp any one
Allow Access-list outside_access_in esp a whole
outside_access_in list access permit udp any eq isakmp everything
outside_access_in list of access permit udp any eq 1701 all
outside_access_in list of access permit udp any eq 4500 all
outside_access_in ip access list allow a whole
pager lines 24
Outside 1500 MTU
Within 1500 MTU
outside 10.10.10.2 IP address 255.255.255.0
IP address inside 192.168.100.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
history of PDM activate
ARP timeout 14400
Global 1 10.10.10.8 - 10.10.10.254 (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Access-group outside_access_in in interface outside
access to the interface inside group acl_out
Route outside 0.0.0.0 0.0.0.0 10.10.10.1 0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.10.2 255.255.255.255 inside
http 192.168.10.101 255.255.255.255 inside
http 192.168.100.2 255.255.255.255 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
ISAKMP nat-traversal 20
Telnet timeout 5
SSH 192.168.10.101 255.255.255.255 inside
SSH timeout 60
Console timeout 0
dhcpd dns 8.8.8.8 8.8.4.4
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
Terminal width 80
Cryptochecksum:7f9bda5e534eaeb1328ab08a3c4d28a
------------Do you have any advice? I don't get what's wrong with my setup.
My DC is 192.168.100.2 and the network mask is 255.255.255.0
The network configuration is configured to set the IP of the gateway to 192.168.100.1 (i.e. the PIX 501).
I have about 50 + peers on the internal network.
Any help is apprecciate.
Hello
You have a license for 50 users +?
After the release of - Show version
RES
Paul
-
VPN between cisco unified customer 3.6.3 and Pix 501 6.2 (1) with the MS CA server
Hello
I have Microsoft CA server with the latest support CEP and pix 501 that gets the digital certificate. I also have the client certificate of Cisco, but VPN doesn't work
In the IPSec Log Viewer, I constantly "CM_IKE_ESTABLISH_FAIL."
It worked well prior to Win2k server has been completely updated with the latest patches.
The pix configuration is identical to that of article http://www.cisco.com/warp/public/471/configipsecsmart.html
I reinstall the stand-alone CA and support CEP server but not had any luck.
What could be wrong?
It looks like IKE implementation problem. Make DH group 2 policy ISAKMP.
Visit this link:
http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/PIX/pix_v53/IPSec/exvpncl.htm
-
PIX 501 and VPN Linksys router (WRV200)
I inherited a work where we have a Cisco PIX 501 firewall to a single site and Linksys WRV200 Router VPN on two other
sites. Asked me to connect these routers Linksys firewall PIX via the VPN.
According to me, the Linksys vpn routers can only connect via IPSec VPN, I'm looking for help on the configuration of the PIX 501 for the linksys to connect with the following, if possible.
Key exchange method: Auto (IKE)
Encryption: Auto, 3DES, AES128, AES192, AES256
Authentication: MD5
Pre Shared Key: xxx
PFS: Enabled
Life ISAKMP key: 28800
Life of key IPSec: 3600
The pix, I installed MDP and I tried to use the VPN wizard without result.
I chose the following settings when you make the VPN Wizard:
Type of VPN: remote VPN access
Interface: outside
Type of Client VPN device used: Cisco VPN Client
(can choose customer of Cisco VPN 3000, MS Windows Client by using the client MS Windows using L2TP, PPTP)
VPN clients group
Name of Group: RabyEstates
Pre Shared Key: rabytest
Scope of the Client authentication: disabled
Address pool
Name of the cluster: VPN - LAN
Starter course: 192.168.2.200
End of row: 192.168.2.250
Domain DNS/WINS/by default: no
IKE policy
Encryption: 3DES
Authentication: MD5
Diffie-Hellman group: Group 2 (1024 bits)
Transform set
Encryption: 3DES
Authentication: MD5
I have attached the log of the VPN Linksys router VPN.
This is the first time that I have ever worked with PIX so I'm still trying to figure the thing to, but I'm confident with the CCNA level network.
Thanks for your help!
Hello
Everything looks fine for me, try to have a computer in every network and ping between them. Check the newspapers/debug and fix them.
Let me know.
See you soon,.
Daniel
-
Cisco 3640 to the PIX 501 site 2 site VPN performance specifications.
I intend on creating a site-2-site VPN in Star configuration with a Cisco 3640 as the hub and PIX 501 at the remote sites. My question is around the plug that I read.
.
The specifications for a PIX-501-BUN-K9 tell PIX 501 3DES Bundle (chassis, SW, 10 users, 3DES).
.
A question is what really "10 users. Which is the limit of the number of concurrent sessions, I have on the VPN at a given time, or that it means something else?
.
I also read the specs say that the Maximum number of VPN tunnels that can support a PIX 501 is 5. Because I'm not going to make a tunnel between the PIX 501 at the remote site and the 3640 on the central site, I think I would be OK. Is that correct or is the max value talk the maximum number of concurrent sessions on the tunnel tunnels?
.
Thank you.
UDP traffic always creates a session in the PIX so that the return traffic will be allowed in. The UDP timeout is 2 minutes but IIRC. If you go around NAT with a statement of "nat 0" should not create an xlate I think.
The real time is hard to say really, probably around 2 minutes for a UDP-only user, you would probably make a few 'local sho' orders on the PIX to really see for sure however.
-
Place a FIOS for VPN router behind PIX 501
I have a Verizon FIOS internet connection and one of their routers wide wireless broadband, and this is a configuration of base completely... their router DHCP and firewalls, and the connection has a dynamic address. I would put the PIX 501 behind the Verizon router as one of its clients and make the VPN PIX of other PIX 501 at other locations, such as my entire network has access to remote networks.
Is this possible, and if yes, any who could some suggest configurations (how to address internal and external, static routes ports that may be required somewhere, etc.)?
Thanks for any help.
When installing my FiOS, I had already asked that it be installed on the Ethernet cable. Don't know they need to do something for you to spend the coax to Ethernet.
The best way to test it would be to find the Media Converter (follow the coaxial cable between your FiOS router to the demarc and there should be a box with a coaxial port, some phone Sockets and an Ethernet port). If you unplug the coaxial cable and plug a laptop computer on the Ethernet port, see if your laptop takes a public IP address. If Yes, then you just have to run to your PIX501 Ethernet cable and you should be ready.
Just to note that Verizon, according to your region, reserved DHCP assignments. This means that you may need to call Verizon and ask them to release the previous assignment of DHCP-MAC addresses. I had this happen recently. They must release the assignment then your PIX will pull a new IP address and they will book your new IP - MAC address assignment. They do this to speed up the connection to a cold start time on the router.
Basically, they are filtering by MAC address, but rather through a sticky ARP where they clear the entry, and then the next device that connects records his MAC address and then only that device is permitted to connect to this leg of the cable. So there is a bit of work you have to do, but the most difficult part would be sitting on hold waiting for a tech, if you call to Verizon.
-
Cisco PIX 501 to Cisco 3005 concentrator via remote access
Hello people,
I need your help.
We got a Cisco PIX 501 in one place and this pix is configured for pppoe connection. The pix connects to internet via the pppoe client. an official ip address ping works well.
So what I want to do is to establish a tunnel von between this pix and a cisco 3005 concentrator.
But I failed to establish it.
Here are the pix config. the acl? s are only for the test and will be replaced if it works.
6.3 (4) version PIX
interface ethernet0 10baset
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the password xxx
passwd xxx
hostname PIX - to THE
domain araukraine.ua
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
outside ip access list allow a whole
inside_access_in ip access list allow a whole
pager lines 24
opening of session
Monitor logging warnings
logging warnings put in buffered memory
MTU outside 1456
MTU inside 1456
IP address outside pppoe setroute
IP address inside 192.168.x.x 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
PDM location 192.168.x.x 255.255.255.224 inside
forest warnings of PDM 500
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
outside access-group in external interface
inside_access_in access to the interface inside group
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
the ssh LOCAL console AAA authentication
Enable http server
255.255.x.x 192.168.x.x http inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
255.255.x.x telnet inside 192.168.x.x
Telnet timeout 5
SSH 194.39.97.0 255.255.255.0 outside
SSH timeout 5
management-access inside
Console timeout 0
VPDN group pppoe_group request dialout pppoe
VPDN group pppoe_group localname [email protected] / * /
VPDN group ppp authentication pap pppoe_group
VPDN username [email protected] / * / password *.
encrypted privilege 15
vpnclient Server 212.xx.xx.xx
vpnclient mode network-extension-mode
vpntest vpngroup vpnclient password *.
vpnclient username pixtest password *.
Terminal width 80
the hub, I created a user pixtest, a group vpntest and I? ve created the rules of the network for example to what server, users behind the pix will be able to access.
And that? s all.
I couldn't send you exit pix or hub because I don't have an error or a message that the tunnel will be established.
What can be wrong?
Thanks for the replies
This configuration example shows how to create an IPsec tunnel to a computer that is running the Client VPN Cisco's (4.x and later versions) to a Cisco VPN concentrator 3000 to allow the user to safely access the network inside the VPN concentrator.
-
VPN - Pix 515e for Cisco router
I have the following Setup and I can't seem to get the next tunnel. My end is a PIX 515e race 7.2 (4). The other end is a Cisco router-not sure of the model or version of the IOS.
PIX:
90 extended access-list allow ip host a.a.a.a host b.b.b.b
NAT (inside) - 0-90 access list
correspondence address card crypto mymap 20 90
card crypto mymap 20 peers set x.x.x.x
map mymap 20 set transformation-strong crypto
mymap outside crypto map interface
ISAKMP crypto identity hostname
crypto ISAKMP allow outside
crypto ISAKMP policy 8
preshared authentication
3des encryption
sha hash
Group 2
life 86400tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key 12345Router:
/ * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-margin : 0 ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;} / * Définitions de style * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-margin : 0 ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}
SDM_5 extended IP access list
permit ip host b.b.b.b host a.a.a.a
ISAKMP crypto key 12345 address y.y.y.y no.-xauth
map SDM_CMAP_1 5 ipsec-isakmp crypto
Description vpn for laboratory
defined peer y.y.y.y
game of transformation-ESP-3DES-SHA
match address SDM_5
I'm running him debugs following:
Debug crypto ipsec enabled at level 1
ISAKMP crypto debugging enabled at level 1I get the following debug output:
August 16-04:16:10 [IKEv1]: IP = x.x.x.x, counterpart of drop table counterpart, didn't match!
August 16-04:16:10 [IKEv1]: IP = x.x.x.x, error: cannot delete PeerTblEntryIsa HS her
IKE Peer: x.x.x.x
Type: user role: initiator
Generate a new key: no State: MM_WAIT_MSG2Any ideas?
Thank you
Dave
If you see the MM_WAIT_MSG2, which means that her counterpart (the other side) does not answer and this side where you can see the status MM_WAIT_MSG2 sent the first message IKE, however, did not hear of the peer.
You can check if UDP/500 is stuck on the way between the 2 sites.
Try running traffic on the other side and see if you also get the same status of MM_WAIT_MSG2. If you do, that confirms 100% 500/UDP is blocked on the way between the 2 sites.
-
PIX 501 DNS resolution with static route
I use a pix 501.
I have an internal DNS server behind the pix that uses my DNS of the ISP servers to resolve external domains.
Now, I want to host a web site on the same server.
To allow external access to the web server, I add the following:
outside_in_http list access permit tcp any host A.B.C.D eq www
static (inside, outside) A.B.C.D L.M.N.O netmask 255.255.255.255 0 0
Access-group outside_in_http in interface outside
It is very good and allows web access. The problem is that the server is able to resolve DNS queries.
How can I allow my server to resolve DNS again securely. I guess it's pretty simple to do, but I'm having a lot of trouble to find the solution.
Thanks in advance
Dylan
On your IP set dns to 67.38.230.69, then ping www.yahoo.com server from guest... what resovle?
-
QoS is supported on the Cisco PIX 501 or 506th?
Hello
There is no mention of QoS in technical for the PIX 501 and 506 records but nothing for the 515. PIX OS 7.x configuration guides do not mention specific material support.
Does anyone know if QoS is taken care of in the 501 or 506th - I need support lines expectations for VoIP over IPSec.
Thank you
Chris
QoS is supported in 7.x code, you would have to level 501/506 to 7.x code, but this is not supported on these two models, the next logical solution would be to upgrade your PIX 501/506 to asa5505s.
Rgds
Jorge
-
Customer Cisco PIX 501 VPN connects but no connection to the local network
Hi all:
I am able to make a VPN connection to a PIX 501. The remote client is assigned an IP (192.168.2.1) also, but not able to access all the machines in the local network connected to the PIX.
I have attached the PIX configuration.
Advice will be greatly appreciated.
********************
6.3 (5) PIX version
interface ethernet0 car
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
enable password xxxx
passwd xxxxx
pixfirewall hostname
domain ciscopix.com
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list 101 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list 102 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP address outside dhcp setroute
IP address inside 192.168.1.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool ippool 192.168.2.1 - 192.168.2.5
location of PDM 192.168.2.0 255.255.255.0 outside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) - 0 102 access list
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp - esp-md5-hmac RIGHT
Crypto-map dynamic dynmap 10 transform-set RIGHT
map mymap 10-isakmp ipsec crypto dynamic dynmap
mymap outside crypto map interface
ISAKMP allows outside
ISAKMP identity address
part of pre authentication ISAKMP policy 10
encryption of ISAKMP policy 10
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
vpngroup vpn3000 ippool address pool
vpngroup vpn3000 Server dns 68.87.72.130
vpngroup vpn3000-wins 192.168.1.100 Server
vpngroup vpn3000 split tunnel 101
vpngroup vpn3000 downtime 1800
password vpngroup vpn3000 *.
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd address 192.168.1.2 - 192.168.1.33 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
dhcpd allow inside
Terminal width 80
Cryptochecksum:xxxx
****************
The DNS server is the one assigned to me by my ISP.
My internal network connected to the PIX is 192.168.1.1 - 192.168.1.33 and the VPN ip pool is 192.168.2.1 - 192.168.2.5
"isakmp nat-traversal 20" can do the trick.
-
I'm setting up a cisco pix 501 vpn tunnel but will have questions. The Firewall works although I am able to get out of the internet, but the VPN does not work. On the primary side, I see that the tunnel is up and the traffic is sent but not received.
Currently I'm sitting at the secondary location but don't know what the problem maybe. Anyone know what I have wrong which could prevent the data to send from this device?
Here is my config
Here's my config if it would help
See the race
: Saved
:
6.3 (5) PIX version
interface ethernet0 car
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate 2KFQnbNIdI.2KYOU encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
hostname ciscofirewall
domain hillsanddales.com
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 5
fixup protocol rtsp 55
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list 101 permit ip 192.168.80.0 255.255.255.0 192.168.50.0 255.255.255.0
192.168.80.0 IP Access-list sheep 255.255.255.0 allow 192.168.50.0 255.255.255.0
in_outside list access permit tcp any host 192.168.50.240
in_outside list access permit tcp any host 64.90.xxx.xx
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP address outside 66.84.xxx.xx 255.255.255.252
IP address inside 192.168.80.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 192.168.50.0 255.255.255.0 outside
location of PDM 192.168.80.2 255.255.255.255 inside
location of PDM 192.168.50.0 255.255.255.0 inside
location of PDM 182.168.80.0 255.255.255.255 inside
location of PDM 0.0.0.0 255.255.255.0 inside
location of PDM 0.0.0.0 255.255.255.255 inside
location of PDM 192.168.80.5 255.255.255.255 inside
location of PDM 192.168.80.7 255.255.255.255 inside
PDM logging 100 information
history of PDM activateARP timeout 14400
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Route outside 0.0.0.0 0.0.0.0 66.84.xxx.x
Route inside 192.168.50.0 255.255.255.0 192.168.50.240 1
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.80.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
<--- more="" ---="">Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-3des esp-md5-hmac aptset
aptmap 10 ipsec-isakmp crypto map
correspondence address card crypto aptmap 10 101
card crypto aptmap 10 peers set 64.90.xxx.xx
card crypto aptmap 10 transform-set aptset
aptmap interface card crypto outside
ISAKMP allows outside
ISAKMP key * address 64.90.xxx.xx netmask 255.255.255.255
ISAKMP identity address
ISAKMP nat-traversal 20
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 3des encryption
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
Telnet 192.168.80.2 255.255.255.255 inside
Telnet 182.168.80.0 255.255.255.255 inside
Telnet 192.168.80.5 255.255.255.255 inside
Telnet 192.168.80.0 255.255.255.0 inside
Telnet 192.168.80.7 255.255.255.255 inside
Telnet timeout 5
SSH timeout 5
management-access insideConsole timeout 0
dhcpd address 192.168.80.2 - 192.168.80.33 inside
dhcpd dns 64.90.xxx.xx 64.90.xxx.xx
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
dhcpd allow inside
Terminal width 80
Cryptochecksum:01532689fac9491fae8f86e91e2bd4c0
: endHello
At least the NAT0 ACL is not in use
You should have this added to the configuration
NAT (inside) 0 access-list sheep
-Jouni
-
How to configure the PPPoE on PIX 501?
Mailto: [email protected] / * /
According to the below URL Cisco TAC:
but I always failed. And my PIX 501 Configuration noted below:
pixfirewall # write terminal
Building configuration...
: Saved
:
6.3 (1) version PIX
interface ethernet0 10baset
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
enable password xxxx
passwd xxxx
pixfirewall hostname
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
names of
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP address outside pppoe setroute
IP address inside 192.168.1.254 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Route inside 10.0.0.0 255.0.0.0 192.168.1.1 1
Route inside 20.0.0.0 255.0.0.0 192.168.1.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Telnet timeout 5
SSH timeout 5
Console timeout 0
VPDN group pppoex request dialout pppoe
Cisco localname VPDN group pppoex
VPDN group ppp authentication pap pppoex
VPDN username xxxx password *.
Terminal width 80
Cryptochecksum:xxxx
: end
[OK]
See the pixfirewall version #.
Cisco PIX Firewall Version 6.3 (1)
Cisco PIX Device Manager Version 1.1 (2)
Updated Thursday 19 March 03 11:49 by Manu
pixfirewall until 58 mins 6 dry
Material: PIX - 501, 16 MB RAM, 133 MHz Am5x86 CPU
Flash E28F640J3 @ 0 x 3000000, 8 MB
BIOS Flash E28F640J3 @ 0xfffd8000, 128KB
0: ethernet0: the address is 000b.fd58.886b, irq 9
1: ethernet1: the address is 000b.fd58.886c, irq 10
Features licensed:
Failover: disabled
VPN - A: enabled
VPN-3DES-AES: enabled
Maximum Interfaces: 2
Cut - through Proxy: enabled
Guardians: enabled
URL filtering: enabled
Internal hosts: 50
Throughput: unlimited
you have all the debugging logs?
-
Client VPN Cisco router Cisco, MSW CA + certificates
Dear Sirs,
Let me approach you on the following problem.I wanted to use a secure between the Cisco VPN client connection
(Windows XP) and Cisco 2821 with certificate-based authentication.
I used the Microsoft certification authority (Windows 2003 server).
Cisco VPN client used eTokenPRO Aladdin as a certificate store.Certificate of MSW CA registration and implementation in eToken ran OK
Customer VPN Cisco doesn't have a problem with the cooperation of eToken.
Certificate of registration of Cisco2821 MSW ca ran okay too.Cisco 2821 configuration is standard. IOS version 12.4 (6).
Attempt to connect to the client VPN Cisco on Cisco 2821 was
last update of the error messages:ISAKMP: (1020): cannot get router cert or routerdoes do not have a cert: had to find DN!
ISAKMP: (1020): ITS been RSA signature authentication more XAUTH using id ID_FQDN type
ISAKMP (1020): payload ID
next payload: 6
type: 2
FULL domain name: cisco - ca.firm.com
Protocol: 17
Port: 500
Length: 25
ISAKMP: (1020): the total payload length: 25
ISAKMP (1020): no cert string to send to peers
ISAKMP (1020): peer not specified not issuing and none found appropriate profile
ISAKMP (1020): Action of WSF returned the error: 2
ISAKMP: (1020): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
ISAKMP: (1020): former State = new State IKE_R_MM5 = IKE_P1_COMPLETEIs there some refence where is possible to find some information on
This problem? There is someone who knows how to understand these mistakes?
Thank you very much for your help.Best regards
P.SonenberkPS Some useful information for people who are interested in the above problem.
Address IP of Cisco 2821 10.1.1.220, client VPN IP address is 10.1.1.133.
MSW's IP 10.1.1.50.
Important parts of the Cisco 2821 configuration:!
cisco-ca hostname
!
................
AAA new-model
!
AAA authentication login default local
AAA authentication login sdm_vpn_xauth_ml_1 local
AAA authorization exec default local
AAA authorization sdm_vpn_group_ml_1 LAN
!
...............
IP domain name firm.com
host IP company-cu 10.1.1.50
host to IP cisco-vpn1 10.1.1.133
name of the IP-server 10.1.1.33
!
Authenticated MultiLink bundle-name Panel
!
Crypto pki trustpoint TP-self-signed-4097309259
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 4097309259
revocation checking no
rsakeypair TP-self-signed-4097309259
!
Crypto pki trustpoint company-cu
registration mode ra
Enrollment url http://10.1.1.50:80/certsrv/mscep/mscep.dll
use of ike
Serial number no
IP address no
password 7 005C31272503535729701A1B5E40523647
revocation checking no
!
TP-self-signed-4097309259 crypto pki certificate chain
certificate self-signed 01
30820249 308201B 2 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
.............
FEDDCCEA 8FD14836 24CDD736 34
quit smoking
company-cu pki encryption certificate chain
certificate 1150A66F000100000013
30820509 308203F1 A0030201 02020 HAS 11 092A 8648 01000000 13300 06 50A66F00
...............
9E417C44 2062BFD5 F4FB9C0B AA
quit smoking
certificate ca 51BAC7C822D1F6A3469D1ADC32D0EB8C
30820489 30820371 A0030201 BAC7C822 02021051 D1F6A346 9D1ADC32 D0EB8C30
...............
C379F382 36E0A54E 0A6278A7 46
quit smoking
!
...................
crypto ISAKMP policy 30
BA 3des
md5 hash
authentication rsa-BA
Group 2
ISAKMP crypto identity hostname
!
Configuration group customer isakmp crypto Group159
key Key159Key
pool SDM_POOL_1
ACL 100
!
the crypto isakmp client configuration group them
domain firm.com
pool SDM_POOL_1
ACL 100
!
Crypto ipsec transform-set esp-3des esp-md5-hmac 3DES-MD5
!
crypto dynamic-map SDM_DYNMAP_1 1
the transform-set 3DES-MD5 value
market arriere-route
!
card crypto SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1
map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1 crypto
client configuration address map SDM_CMAP_1 crypto answer
map SDM_CMAP_1 65535-isakmp dynamic SDM_DYNMAP_1 ipsec crypto
!
................
!
endstatus company-cu of Cisco-ca #show cryptographic pki trustpoints
Trustpoint company-cu:
Issuing CA certificate configured:
Name of the object:
CN = firm-cu, dc = company, dc = local
Fingerprint MD5: 5026582F 8CF455F8 56151047 2FFAC0D6
Fingerprint SHA1: 47B 74974 7C85EA48 760516DE AAC84C5D 4427E829
Universal router configured certificate:
Name of the object:
host name = cisco - ca.firm.com
Fingerprint MD5: E78702ED 47D5D36F B732CC4C BA97A4ED
Fingerprint SHA1: 78DEAE7E ACC12F15 1DFB4EB8 7FC DC6F3B7E 00138
State:
Generated keys... Yes (general purpose, not exportable)
Authenticated issuing certification authority... Yes
Request certificate (s)... YesCisco-ca #sh crypto pubkey-door-key rsa
Code: M - configured manually, C - excerpt from certificateName of code use IP-address/VRF Keyring
C Signature name of X.500 DN default:
CN = firm-cu
DC = company
DC = localC signature by default cisco-vpn1
IMPORTANT: I don't have a Cisco IOS Software: 12.4 (5), 12.3 (11) T08, 12.4 (4.7) PI03c,.
12.4 (4.7) T - there is error in the cryptographic module.Hey guys, it's weird that the router is not find cert after IKE is the cert and validates, it is certainly not reason, but I would go ahead and set up the mapping of certificate on this router to force the client to associate with Group of IKE, for that matter, that you need to change your config a bit for use iskamp profiles :
http://www.Cisco.com/en/us/docs/iOS/12_3t/12_3t8/feature/guide/gt_isakp.html
Maybe you are looking for
-
iPad Pro think Smart Keyboard is still connected, even when it is not
Hello. I have an iPad 9 "Pro that I've just updated to iOS 10. I had a Smart keyboard because I bought the iPad 6 months ago. Since I updated the operating system, even when I disconnect the iPad since its Smart keyboard, iPad think he is always conn
-
Original title: isass.exe - application error application faild to initialize properly (oxcoooo142) click on ok to end now screen black with white arrow will not even stop what should I do Reference Dell Dimension 4700c Ihave try F8 F1, f2, F12, and
-
HP Photosmart C6380 all-in-one intermittently print job does not print
My HP Photosmart C6380 all-in-One has a problem with the print jobs that fail intermittently to print the first time that I send it to the printer. I can see the print job listed in the queue, but it fails to print. I might have to send the job onc
-
not allowed to access my user.
OK, so I'm a big time player on my computer of grannies except when I play most of my games that I need to enter its password. that is when I activate the reactor for my game on the site called ijji.com it is said that the administrator must allow ac
-
Windows XP Sound Recorder [sndrec32.exe] in Windows 7 64 bit?
Utility tape recorder for Windows XP [sndrec32.exe] works in Windows 7 64 bit? The reason I ask: under XP, I use sound recorder to audition small sound files for possible use as system sounds. No sense to launch a 'real' drive just to play a .wav of