Dial the notifier in file lives

Similar Questions

• Mode shared in Windows Live Messenger 2011, published on the mail server or sent to computer the other sharer files?

  In shared in Windows Live Messenger 2011 Mode, are file published on the mail server or sent to computer the other sharer?

  For questions and answers to the topics of Windows Live Messenger, please post in the appropriate forum:

  http://www.windowslivehelp.com

• I can no longer send you pictures via my Panasonic Lumix program or the range of file photos. I can via Windows Live Mail but it is tedious to do.

  I can no longer send you pictures via my Panasonic Lumix program or the range of file photos.  I can via Windows Live Mail but it is tedious to do.  The problem started when I change my ISP AOL to Comcast (I think).  When I try to do as I have always done in the past, I get this message:

  Here is the message I get:
  The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider. The rejected e-mail address was '{removed email address}'. ' Subject ' Emailing: PTC Joan Huntsman 001.jpg, account: 'Imap', server: 'smtp.comcast.net', Protocol: SMTP, server response: ' 550 5.1.0 required authentication ', Port: 587, secure (SSL): no, Server error: 550, error number: 0x800CCC78

  Help!  Thank you

  original title: have trouble sending pictures

  How can I set up/configure Outlook Express, Windows Mail & Windows Live Mail to E-mail from Comcast?
  http://customer.Comcast.com/pages/FAQViewer.aspx?GUID=5be34cb1-B190-4FC1-BEAA-818778a54aed

• How to associate the photo files to the Windows or Windows Live Photo Gallery Photo Viewer viewer?

  I want to be able to associate the photo files to the Windows and Windows Live Photo Gallery Photo Viewer viewer.  In both cases, I can't find the executable files.  I would like to know the file name and location.

  Hey healee.

  There is no executable file to the Windows Photo Viewer. It is not a stand-alone application. So you can't run it as an application rather it runs with dllhost.exe.

  Same information applies to Windows Live Photo Gallery.

  The dll for the photo viewer file is located here:C:\Program Files\Windows Photo Viewer\PhotoViewer.dll

   

  Coming to your point about the picture of opening attached files in Mozilla, you should be able to open the file with using Windows Photo Viewer open with which gives the possibility to choose the helper application.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is there a file where are stored the data pause & rewind live TV in Windows Media Center?

  Is there a file where are stored the data pause & rewind live TV in Windows Media Center? More to the point - how can I save the time shift buffer in WMC?

  I would like to know if it is possible to find the data that Windows Media Center is to store during her watch TV Online. I don't speak data WMC stores by itself to allow the use of the function of pause & rewind live TV, how to find files that you have saved yourself by pressing the Red record button.

  For example, I often live TV playing on the computer in the background while I do something else. Can I see or hear a brief fact/clip/segment of interest that flashes by and I think, ' I wish I had recorded that. " If I go back to the bit I wanted to capture and hit record, it will not capture the part I want, it will start recording from the point, the program has achieved in real time.

  Does anyone know where the actual data of the TV are kept so that I can retrieve these clips that interest me, but were never recorded by me manually? I found the "TempRec" in the folder "Recorded TV" - anyone know how to convert this video (if indeed it is the location where you store temporary data for pause & rewind live TV)?

  If not, is it possible to enable a feature in WMC, which automatically starts the recording of TV channels as soon as you go to them? This way I can record everything, then just cut all the scenes of interest using Movie Maker. If not, are there other Win7 compatible programs that will do this?

  Thank you.

  Apparently, there is a way to achieve the goal.

  A nice gentleman from the Germany wrote dll that create a "time-shift buffer recording" add-in for WindowsMedia Center (for Vista and XP only) which can be found at:

  http://thegreenbutton.com/forums/p/3...83.aspx#162083

  For Windows 7, there would currently be via a 3rd party of program, i.e. PowerCinema 6, which records from any point in the time shift buffer zone - I don't know why Microsoft has not also incorporated this feature into WMC for have other programs third 3rd (including EyeTV for the Mac).

  Unfortunately, suggestions from another forum to change file extensions in .tmp .dvr-ms TempSBE and double-click on the file to read the file of time lag in WMC, does not work in Windows 7 x 64 (the message in this forum has been regarding the Vista x 64), however, I have not tried with other versions of Windows - I would like to know if anyone has had some luck using this method.

  Even if it had worked, I think I would have always preferred the usability and features of a program that does the job for me, like Power Cinema - damage, it could not have been WMC. What do you think?

  Thank you.

• lost all the images contained in the "my pictures" file on the hard disk while using Windows Live Photo Gallery

  I lost all the images contained in the "my pictures" file on the hard drive.  The files are there but when I open the files they are all empty. It's like some 50 folders and each folder contained about 25 or so images jpg. I lost the using the "windows live photo gallery» I found a thread that someone else has had this problem and only one answer was to check the checkbox 'Show hidden files'. I have done this no luck there. When I open "windows live photo gallery" all records are on the left of the window but empty. I did not send any of these files to the "trash".  Can someone tell me how to recover these?

  You ran the scanner of MS too? It will take some time, but it must be done. If a virus is responsible for it must be nuked before he can ravage any more.

  Send all the pictures? You can still recover these - and get some help course in order to avoid this sort of thing. External hard drives and online storage are worth a small spending to protect valuable files. I also keep the dvd - outdated image files but enough fix if even they can deteriorate over time (but don't we all!)

  Let us know if the scan MS lands anything - run the full scan - it will take time.

  Best - R

• After saving the emails from windows live mail, why not open them on my computer as the file extension is wlmail.fol?

  After saving the emails from windows live mail, why not open them on my computer as the file extension is wlmail.fol?

  wlmail.fol is a tiny text giving the name of the folder. The exported messages will have filenames like 00D13E83 - 000025DF.eml. If you don't see all of the files like this, your export probably did not work properly.

  For a successful export, follow these directions:

  1. Set Windows Live Mail to work offline before starting.
  2. Create a temporary folder on your desktop * to contain the exported messages.
  3. In the Export Wizard, select the temporary folder, and then select all the folders.* *
  4. When it is complete, check that the number of files in each folder to the temporary folder is one more than the number of messages in the corresponding folder of WLMail.
  5. Copy the temporary file to its final destination.
     If you use a reader not NTFS to do this, you will see a warning that certain file properties will not be copied files. This can be ignored.

  * Windows Live Mail do not work with files that are not on a local drive, as opposed to an external or network drive. This is avoided by using the office as a temporary folder location. 
  * If you want to export the files sampled only, select each of them containing messages. Subfolders are not automatically selected by default.

• Live data / problem with the permissions of files

  Just try an old version of Dreamweaver MX 2004. I use my service for server/test remotely webhosting server functions. It is running PHP 4.3.10 and MySQL 3.23.58. I was able to set up the database connection and test - retrieve a recordset with no problems. By following the tutorial, I found that visualized wouldn't work, he just gave me a warning about file permissions be wrong. It turns out that when Dreamweaver creates a temporary file of the work-in-progress to upload to the remote server, the file is created on the server with owner = rw, group = rw, r = world, which explains why it does not-group must be set to group = r. The file is created on the fly and then immediately deleted by Dreamweaver so it is impossible to manually set permissions on the server and probably pretty useless too.
  
  I tried just to save the file and the preview in the browser that forces again to be uploaded to the remote server. The first time, it resulted the browser offering a download of the file box instead to run the page. The reason is - again - that Dreamweaver updates downloaded file permissions to include the Group = rw. If I manually set permission for the group the r = group that it works very well.
  
  It turns out that Dreamweaver always puts the permissions of files on the downloads of files (checked php and html) on the remote server / tests to include the Group = rw. Once I have it placed manually on the remote server / tests to the Group = r for a php file, everything's fine and later additions of the same file do not change it again.
  
  I checked with the Web hosting company and their second line reported back that the default file permission they put on downloaded files includes group = are so DW that causes the problem of definition of group = rw first. I was confirmed using WS - FTP to download the same (renamed) file in the same directory target and the set of permissions were owner = rw, group = r, world = r.
  
  Then
  
  Can someone tell me please how to change permissions that DW sets on the files written on a remote server, because I spent countless hours on it without success. Go looking at other posts in this forum, it could be that other users hit the same kind of problem with DW8

  Specifically, Dreamweaver supports the ability to use a remote server for testing purposes. It seems reasonable to test the site locally using the real remote environment in which it must be applied if the site is not already online.

  It turns out that the problem for me is related to what the remote server and tests of server connection configured to use SFTP. This caused the files created on the remote server to have RW set for the group that has been causing all the problems. When the value to use FTP standard, is very well - prepare file permissions properly when downloading and data online works as expected.

  Another SFTP side effect was that the site FTP log contained the Interline - am added to many of them whenever the remote server has been consulted but no text. On the configuration of the connection to standard FTP log fills up with messages as expected.

• How Windows file lives burning really working system

  Two days and two DVDs that are damaged.

  The idea of the burning (UDF) file system is understandable to me, and it looks easy. But it's not.
  My first case:
  Burning files on 8 gb dvd. So I put some files on a disk. Now I want to check something on another dvd, so I eject 8 gb dvd and guess what - the session closes without telling me.  It won't really be a bad thing if it would have been nice.  Then closing session 5 minutes and it seemed that the dvd is written by laser. Then I checked something on another dvd I have planned and put 8 gb rear dvd. Now windows says the drive is damaged and the burner looks like that I'd put a piece of wood on the set instead of appropriate disk.
  I do not have another 8 GB DVD so thank you Ms.
  My second case:
  Burning files on ordinary DVDs.  So I put some files on a disk. Now, I want to go to sleep and rest files I have will burn tomorrow. So I put the PC to sleep. Now, we have today - I woke up my PC and wants to finish my burning. I tried to open the dvd in my computer, but Explorer say disk structure is damaged. I checked several times with the same result. Then I ejected a disc and put it again. Now exploring can open a disc but it is empty and I can format my drive or burn files in the usual way (not UDF) but of course it is has some space due to files engraved yesterday. So I need another dvd to keep my data.
  Conclusion:
  Windows burning tool is defective, not ready for daily use and should not be implemented to the paid official of the operating system. And if something will happen (Automatic logoff [and Yes, I know how to disable it, now]) or something is not possible (put the pc to sleep before closing session), the user must be notified before.
  If you have something that can help me burn files successfully, please let us know.

  Hello

  Yes, you can put the system to sleep or eject the CD while using the live file system.

  See also:
  http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use

• I can not use files lives in application.exe

  Hello al.

  I use files lives to call my indicators. Its works perfectly in my vi but when I try to build exe with the files lives app generator is not working.

  How can I solve this problem? You can see my call lives method of attachments.

  Thank you.

  I don't know if this is your problem, but do not use a SAW, simply use a VI the value be reentrant.

• CTT files & lives

  I created a file lives of an existing vi using a ctl for elements of semaphore file. After installing the model lives I noticed that the link to the original ctl file still exists.  I created a TTC of the ctl of origin file file and installed in the directory where I installed the files FSM.vit and FSMd.png, but I am still bound to the original ctl file.  How to create the link of the file lives in the ctl file?

  Hi hounddog,.

  I created a simple .lives using a .ctl Boolean typedef strict in an attempt to recreate what you had.  I then opened the .ctl in VI model and saved as a .ctt control in the same folder as the .lives and it seems to be connected correctly.  I did a Save as... and then replace the copy of the original.  Is this different from the method you use?

• Since the last nights update I get now launching explorer.exe "windows cannot access the specified device, file, or the path?

  Since update of last nights, I get now launching explorer.exe "windows cannot access the specified device, file, or the path?

  Hi Jemd3,

  I suggest you to completely remove Norton of the system using Norton Removal Tool and check if the problem persists.

  Method 1:

  Maybe it's that your computer is affected by virus and malware. I suggest you run an online anti-virus scan and a scan for Malware. See the links below.

  Microsoft OneCare:

  http://OneCare.live.com/standard/EN-US/3/default.htm

  Malicious software removal tool

  http://www.Microsoft.com/security/malwareremove/default.aspx

  Get a free PC safety scan

  http://OneCare.live.com/site/en-us/default.htm

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A text is cut on the right in the impressions of Windows Live mail emails and web pages.

  A text is cut on the right in the impressions of Windows Live mail emails and web pages.

  Hi Doug MacDonald.

  1. Did you the latest changes on the computer?
  2. What web browser are you using to print Web pages?

  If you use Internet explorer, then change the margin settings to the title of the page setup in the file menu and check if that helps.

  See the articles below and check if it helps.

  Printing webpages: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/printing-webpages-frequently-asked-questions

  Printing webpages: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/printing-webpages-frequently-asked-questions

  Note: The items above are also applicable to Windows XP.

• Threats of virus after a clean install... where is the 'old machine' file?

  My PC has a virus; My anti virus would not repair it... After doing a clean install of Windows XP, I remember reading that I can delete a file named 'old machine' if the new installation worked. I installed Microsoft Security Essentials... For 3 days, everything worked was great until this evening...

  Tonight, I ran an update of virus definitions and then run the 'full' scan Microsoft Security Essentials has notified me that I had a few threats. There was also a warning on a temporary file and asked if I wanted to send it to Microsoft I did...
  I am trying to be proactive and prevention viruses take over this machine again... I remembered reading after installation 'own' that I should remove the file 'old Machine' if the computer works well after the clean install? .. .also had a warning on a temporary file.
  Any idea where I can find the 'old machine' file; (I thought the clean install would remove all)... I did a search on my computer and come with nothing
  Help, please!...

  Hello

  Step 1: You can remove it in c:/Windows. With the help of old cleaning disc.

  In the disk cleanup, select the previous installation of windows. Put a check mark to remove it.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Step 2: Run a virus scan to make sure that the computer is Virus-free:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  For more information:

  The disk cleanup tool stops responding while it is compressing old files on a Windows XP-based computer

  http://support.Microsoft.com/kb/812248

  It will be useful.

• I have the virus of file recovery, now I have a black screen with cursor blinking in the upper left corner.

  I have a Pavilion Notebook and recently caught the virus from file recovery.  I bought and ran the disc of Trend Micro Titanium Maximum Security.  Now, I get a black screen with a flashing cursor in the upper left corner of the screen.  All tests ran for memory, hard disk, etc. are OK.  Now I have a recovery disk, but have not backed up my files.  Any suggestions?

  Download your backed up files, then you can boot from your recovery disks to reinstall Windows.Several options to do so.

  Remove the hard drive and attach it to one > USB adapter . Plug it into another computer via usb port and copy files off the power.

  You can use > Ubuntu Live CD to boot from and backup files.

  OR ->Kaspersky CD has the ability to back up files.