CTT files & lives

Similar Questions

• I can not use files lives in application.exe

  Hello al.

  I use files lives to call my indicators. Its works perfectly in my vi but when I try to build exe with the files lives app generator is not working.

  How can I solve this problem? You can see my call lives method of attachments.

  Thank you.

  I don't know if this is your problem, but do not use a SAW, simply use a VI the value be reentrant.

• Convert file .ctt file .txt

  How to convert my contact list of the .txt file .ctt file

  Hello

  In most cases will not convert simple txt file in XML format

  Otherwise, it depends on the layout of the contents of your text file.

  Read this page for more precision.

  http://www.stylusstudio.com/text_file_to_xml.html

  Jack MVP-networking. EZLAN.NET

• How Windows file lives burning really working system

  Two days and two DVDs that are damaged.

  The idea of the burning (UDF) file system is understandable to me, and it looks easy. But it's not.
  My first case:
  Burning files on 8 gb dvd. So I put some files on a disk. Now I want to check something on another dvd, so I eject 8 gb dvd and guess what - the session closes without telling me.  It won't really be a bad thing if it would have been nice.  Then closing session 5 minutes and it seemed that the dvd is written by laser. Then I checked something on another dvd I have planned and put 8 gb rear dvd. Now windows says the drive is damaged and the burner looks like that I'd put a piece of wood on the set instead of appropriate disk.
  I do not have another 8 GB DVD so thank you Ms.
  My second case:
  Burning files on ordinary DVDs.  So I put some files on a disk. Now, I want to go to sleep and rest files I have will burn tomorrow. So I put the PC to sleep. Now, we have today - I woke up my PC and wants to finish my burning. I tried to open the dvd in my computer, but Explorer say disk structure is damaged. I checked several times with the same result. Then I ejected a disc and put it again. Now exploring can open a disc but it is empty and I can format my drive or burn files in the usual way (not UDF) but of course it is has some space due to files engraved yesterday. So I need another dvd to keep my data.
  Conclusion:
  Windows burning tool is defective, not ready for daily use and should not be implemented to the paid official of the operating system. And if something will happen (Automatic logoff [and Yes, I know how to disable it, now]) or something is not possible (put the pc to sleep before closing session), the user must be notified before.
  If you have something that can help me burn files successfully, please let us know.

  Hello

  Yes, you can put the system to sleep or eject the CD while using the live file system.

  See also:
  http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use

• Harassed by "save changes" dialog box in PHP file Live View on DW CC 2014?

  Hello

  I am being constantly harassed by the dialog "save changes to < document name >' when I'm working in Live view on DW CC 2014. Every time I have changes to the code, especially if I use the properties toolbar, I was immediately prompted to save the changes. I realize the rendering system account must have a recorded document to view from, but this happens after every single little change. If I look at watching the live view and decide to make some changes to the code I can get invited several times while I make these changes and it is not until the changes are finished I want to check live view again (when I save the document), but I have to keep stopping to reject dialogue! This means that I must keep turn off live view to make relatively small changes, and then turn it back on.

  I've always been able to work OK in this way on all previous versions using the 'Preview using temporary file' parameter, but this version works the same way. I'm not bothered if I save the file when changes are made in order to update the live view, so just remove the dialog box would be a decent solution.

  Thanks for any help

  Hello

  Turn it off in "View > Live View Options"... automatically uncheck "synchronize remote files.

• Dial the notifier in file lives

  Hi all. I use the notifier for forward my datas.

  I have create a notifier in main.vi and I want to call my values in sub.vit

  As an attachment, you can see my operation basically.

  Why can't my values come into my sub.vit files?

  Thank you.

  I have fixed my problem with referance overall.

  And I found my error everything notifier.

• Install file LIVE BAR in the BB Tablet

  Hi all

  Please help me if someone has an idea.

  I need to install direct queue bar in Blackberry tablets? I can install it like COD and Jad file located in the smartphones of BB. Or can I push bar file through BES?

  In the affirmative, please let me know the link. or any other solution?

  Thank you!

  I've seen users able to install App World or files of load bar side via the developer mode.

• APP-FND-01630: cannot open the file live DBC

  Hi - I've done a fresh install of R12.1.1 on RedHat Linux - x 86 update 5 (Oracle Linux) unbreakable.
  
  Post Install resulted in some errors:
  
  RW-50015: error:-HTTP listener does not. The service may not be started on the port again. Please check the service and use the button try again.
  Help page
  check the URL = http://test.xyz.com:8000/OA_HTML/help
  
  RW-50015: error:-Help Page does not. The service may not be started on the port again. Please check the service and use the button try again.
  Virtual directory
  RW-50015: error:-Http virtual directory server is not responding. The service may not be started on the port again. Please check the service and use the button try again.
  JSP
  ----
  check the URL = http://test.xyz.com:8000/OA_HTML/jtfTestCookie.jsp
  RW-50015: error:-JSP does not. The service may not be started on the port again. Please check the service and use the button try again.
  Login page
  RW-50015: error:-Login Page does not. The service may not be started on the port again. Please check the service and use the button try again.
  
  I corrected these by applying Patch 6078836
  
  Then I tried to restart rapidwiz, but I don't know where is the saved configuration.
  
  So I restart Apache, was able to connect from a Windows client and try opening the forms, but get the error:
  
  APP-FND-01630: could not open the file /d01/oracle/VIS/inst/apps/VIS_oracle/appl_fnd/12.0.0/secure/VIS.dbc
  
  I don't know what to do, am about to throw this box.
  
  very frustrating installation.

  Hi Hussein;

  I'm just wondering, at this point if we give 777 it may work manually?

  Respect of
  HELIOS

• When you have a dynamic LIVES in a class of LV, what happens when it is part of an executable file?

  Strangest thing...

  It is in a project with hundreds of other VI.  The build options the same thing as the other hundreds of VI.

  However, when you build an executable file, it won't run.

  Well... it's not quite accurate.  Because I could create another LIVES in a code example and it worked!

  Originally, I had the LIVES as part of the application.  Now, I put the destination in a folder LIVES.  LIVE and dangerous files go to the folder LIVES.  I print the path and it is... So, it should be called dynamically, but this isn't.  How will I know?  I placed an equivalent to a printf to see if the SAW is running.  The first thing it does is write "in the LIVES" in a file.  Nothing appears in the file...  The file is used elsewhere, so write to the file works.

  I'm at a loss to understand what is happening...  Unfortunately, there is no way to view the code.  With respect to the recognition of an example of the code style, which works, so it is no good either...

  AAAaaaaarrrrrrrggggggggghhhhhh!

  Any ideas out there?

  

  I want to thank Heiko F. for his wisdom to solve this one...

  The solution was to take the LIVES out of the LVClass folder and disconnect from the class.

  VIT could physically be in the folder where private methods, BUT it was added in the project outside the original class files.

  This meant done right click on 'My Computer' and add the file LIVES.  Then of course, simply set the file LIVES as always in the build properties.

  Man and "voila" resolved...

• I'm unable to remove the live onecare backup files to my external drives

  I can't delete allows you to delete the backup files Live Onecare to external drives

  Hello

  What exactly happens when you try to delete this file? Error message?

  See the article below which might help you.

  How to remove a Windows Live OneCare backup file
  http://support.Microsoft.com/kb/943904

• Noise DC value of the ini file values

  Hello

  I am trying to build a generator of signals (sine, triangle, sawtooth, square random noise, DC). I managed to get the job of waveform using the signal generator of NOR built based on VI. but I want to add the DC case that I managed to do. but I want the values (magnitude and frequency) to be in an ini file. My idea is manual sets the values in the file, once I run the vi and select the case of DC noise, it should read the file values and the data output and once I have stop, it records the values of dc before returning.

  So, I'm stuck trying to figure how to do this. I hope that I was clear enough. I don't have a code to view since I haven't started yet coding on this part. Help, please.

  Clearly enough explained.

  Take a look at the screw configuration file, found in e/s from file > Config File live. There also many examples n the community, as well as in the Finder of the example, illustrating the use of these. A good starting point is the sample Configuration settings file write example Finder, and reading Configuration settings file.

  Your .ini file will look something like this, once created:

  [DC noise settings]

  Amplitude = 1.234567

  Frequency = 8.901234

  This is equivalent to:

  [Name of section]

  Key 1 = value

  Button 2 = value

  When asked to read a specific key in a certain section, VI only through the file for the named section, and then search for they key the name you provided it. Remember, you will need to know what type of data is when you read back.

  You can use VI writing to modify specific keys in specific sections as soon as you close the file.

  This is one of a multitude of methods, you can use to do this, but are probably the simplest.

• Path to the file on the virtual machine

  Hi people

  I am aware of VMRUN and would use call programs on the virtual computer and move files between the host and the guest.  I don't know exactly what it does good, nor how these virtual machines are actually structured, so I would like someone to clarify for me if it is even possible to have a host path to a file on the client VM.

  For example, I use scripts from my Mac that do a lot of editing on the side of the virtual Windows machine - is there is a way, I can use to refer to and modify a file on the virtual machine without using VMRUN.

  Thank you very much!

  Mirroing is a little difficult, I don't think that anything that is either duplicated with shared folders.  What happens is the Windows to the Documents, music, path is set to a UNC path (vmware-host\), which is served by the VMware HGFS file system, a mechanism for sharing private with OS X.  In OS X, just the files live in any directory is shared.  But that's what you say, a place with several shared paths.

  For SMB sharing, sharing so once mounted on your Mac, OS X uses a SMB client to Yes go on the network to access files in your guest VM files standard Windows.  All traffic is host only, unless the virtual machine is filled and you use the Wifi connection, in which case the traffic can "bounce" the point of wireless as a jump.  There are ways to optimize the network path, so all traffic is strictly host only.

  I have not benchmarked HGFS v. SMB, but there is a "tax" anyway compared to the opening of the VM file on its file system local.  For your use case, it is probably useful to check the two options.

• Captivate files, as long as &amp; quot; damaged &amp; quot; -2

  Hello everyone.
  
  I have a cp file was last edited 8/21.
  I made a backup of all the Captivate 2 projects before moving on to Captivate 3.
  
  I opened the project and it doesn't matter if I choose overwrite it or save as option, the following 2 messages is received.
  
  
  Exeption Occored [\num]
  

  "Adobe Captivate cannot open filename.cp because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded)."

  
  
  This file has never been e-mailed or opened from a network drive. The file lives directly on the PC.
  It is the only project that did not open properly.
  
  Does anyone have one suggestion, another that recreate the evidence of the generated output?
  
  Thank you for your imput.
  JMS

  For anyone interested.

  I ended up reloading Captivate 2.
  At the same time, I opened Captivate 2 and 3.
  I then could copy the slides from Captivate 2 and paste in Captivate 3.

  After that everything was copied to Captivate 3 and I checked everything was working, I uninstalled 2 & 3 and reinstalled 3.
  Everything works now.

• Reuse of the custom controls in a model of VI

  Hello

  My question is do my Subvi more reusable modules using templating.

  I am writing a message in queue manager application to control many different instruments running asynchronously.

  A super nice feature of the models that I recently discovered, is that if you include a control or a Subvi as a model in your file LIVES.

  If you create a new VI using this file LIVES it automatically prompt you to re - register these files, which would allow me to save a lot of time during duplication

  My managers of messages queued for the different modules. (I know that the actor model eliminates this, but it is important that I get this done soon, and I won't change my project too at this point).

  My question is that, with the model of control, I seem to be unable to use a file the same way TTC. That said, I can have one instance of a TTC but when I try to create a copy of it I am asked to re-record it as a .ctl file, so if I created a new VI from the model I'm unable to update all instances of the control in this way convenient.

  Is there a work around for this?

  Thank you in advance!

  Ah, actually, I solved my problem; just does not allow quick selection because then it will use the model to create a new ctl file.

  To remove a TTC, I need select file .ctt via browser. Oops.

• XSL stylesheet

  XSL style sheet is in the format of the program and does not allow playback of Contact History in Windows Live Messenger. I said no Windows Live Messenger to record history in Documents/received files. How do I get rid of the xsl so I can record contact history?

  History of Contact, you hear a list of your Contacts, or do you mean a copy of the actual conversation between you and your Contacts?

  For what it's worth, I don't have Messenger configured to record Conversations in my received files.  If I want to record a conversation, I just copy and paste it into a Notepad text.  Message logging settings are in the Tools / Options / Messages.

  The Contact in the Messenger tab to save a list of your Contacts as a .ctt file.  This file can be read by most of the text editors, certainly by Word or Notepad, but it's only really meant for export or import Contacts in Messenger...