Difference between Standalone Converter and converter integrated with VMware vCenter Server?

Similar Questions

• What is the difference between the model and its clone in VMware?

  What is the difference between the model and its clone in VMware?

  Clone

  A clone is a copy of the virtual machine.

  You can't convert back the cloned Virtual Machine.

  A Clone of a Virtual Machine can be created when the Virtual Machine is running

  Cloning can be done in two ways: Clone full and linked Clone.

  A full clone is an independent copy of a virtual machine that shares nothing with the parent virtual machine after the cloning operation. Continuous operation of a full clone is entirely separate from the parent virtual machine.

  A linked clone is a copy of a virtual machine that shares virtual disks with the virtual machine of parent on a regular basis. This preserves disk space and allows multiple virtual machines to use the same software installation.

  Cloning of a virtual machine can save time if you are deploying several similar virtual machines. You can create, configure, install the software on a single VM and then clone several times, rather than the creation and configuration of each virtual machine individually.

  Model

  A model is an original copy or a reference image of a virtual machine that can be used to create many clones.

  Models can be turned on or edited and are harder to change than usual of virtual machine.

  You can convert the model to the Virtual Machine update model base with the latest released patches and updates and to install or upgrade any software and still convert to template to use for the future deployment of Virtual Machines with the latest patches.

  Convert virtual machine model cannot be performed, when the virtual machine is running.  Only the Clone to the model can be performed when the Virtual Machine is running.

  A model offers a safer way to preserve a virtual machine configuration that you want to deploy several times.

  When you clone a virtual machine or deploy a virtual machine from a template, the cloned virtual machine resulting is independent of the virtual machine or the original model.

• Can of POS used with Vmware vCenter Server 5 Standard license

  Hello team,

  Accroding to http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2016565

  WTP is supplied with vSphere Essentials more and more.

  I searched but did not meet solid information where he explains when licensed some don't need us to buy additional licenses for new features / applications, etc.
  I'm new to Vmware licenses hierarchy. We have Vmware vCenter Server Standard 5 license.
  Please point me to a URL that contains the hierarchy of Vmware licenses .

  Thank you much in advance.
  Niraj

  You can use vCenter Server Standard 5 licenses for POS. Everything we have features such as (profile of HA, DRS, FT, VDP, host, DVS etc.) you don't need to worry about the virtual server license Center. You must use the correct license vsphere host. But don't forget to think about some virtual server edition Center can handle some vsphere hosts.

  vCenter server 5 Essentials can manage only vSphere Essentials Plus or vSphere Essentials.

  vCenter Server Standard 5 licensecan eat only vSphere vSphere Enterprise and vSphere companies plus standards.

  You can activate the functionality of POS with vSphere Essentials Plus then you will need to use vCenter server 5 Essentials.If you use vCenter server standard for vSphere Essentials Plus so it give error or warning for violation of editing.

  Thank you

  Atul

• Should I install Standalone Converter 5.0 on vCenter Server?

  Hello

  (1) I would like to ask your advice that I should install Converter Standalone 5.0 on the vCenter server or it must be installed on a computer that is running Windows OS?

  (2) is it necessary to install the Standalone Converter 5.0 on a physical computer or a virtual computer is also OK?

  Thank you

  I don't think that it will make a difference, but for us, we do not install anything on the host to vCenter OS in addition to vCenter and VUM.  I have a virtual machine, I installed converter on and you use for all my stuff of conversion.

• How to get the Manager to update with VMware vCenter Server 5.0 device

  Hello

  We have VMware vSphere Essentials 5 and already, I downloaded the vCenter device but how get the Update Manager?

  Thank you.

  Hello

  If you want to use the Update Manager you will have to be installed on a separate windows server, the device has UM built as of yet.

• What is the difference between primary key and unique indexes with forced not null?

  Primary key is = unique index + not null?

  The short answer is Yes.

  However, even if the primary key, applying both uniquness and not null, there is a notion of "special".

  You can only have one primary key in tables, but you can have multiple unique indexes and constraints not null.

  See: https://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:8743855576462

• Wonder about the difference between the element and symbol with draggable drag

  I'm trying to understand the difference between a symbol and a with draggable element.

  She is the example I did: https://www.box.com/s/v2s8ueeqof9litu4zvwm

  • for the Rectangle element, drag works very well. The item dragged from where he is.
  • the symbol of the box which is initially 0 left and top 0, no problem
  • the symbol of the boxCopy which is placed on the left 100 and top 100, on the trail, he jumps to this amount.

  I guess drag Gets the original position of the symbol on the stage box and add these numbers to the position of the step. I have the symbol arround medication and it seems that the scene is translated left and top of the amount of the left and top of the symbol.

  This does not happen with the Rectangle element.

  Obviously there is something I don't understand.

  Ok. Joel gave me the solution.

  After you have placed your symbols on the stage, remove the left and top lines in the symbol. This will reset to (0,0).

  Here is the corrected file. In the left panel, you will see that there is no left and top except one to show the difference.

  https://www.box.com/s/v2s8ueeqof9litu4zvwm

  

• Jack screw part number clarification: difference between 187949-01 and 187949-10

  We bought a few jack live, Mfr P/N 187949-10, but the parts are labeled 187949-01. What is the difference between-10 and -01. Are parts of the same, but differ only in the amount of packaging? Thank you.

  Hi Mwong,

  Thanks for the post and I hope that your well today - welcome to the Forums of NOR.

  I'm sorry to see that you have not yet received any support.

  Looking at the site, ni.com, here, I found this information,

  Specifications and manufacturers for Council mating of connectors

  http://digital.NI.com/public.nsf/allkb/8ECF4BAD615F18BC8625648400521E97

  (1) 4 piece Kit of screws for connection cables 187949-01 locking screw

  (10) 4 piece Kit of screws for connection cables 187949-10 locking screw

  That is why the differences between the 01 and 10 is the number of kits.

  However the link here.

  Specifications and Dimensions of the female connectors to screws used on 68 pins plug-in connectors

  http://digital.NI.com/public.nsf/allkb/43771DBD89FADB7B86256BC90053EC08

  "The kit contains 40 screws and washers (enough to convert the two ends of the).
  10 sets of cables). The part number of the kit is 187949-01 "

  But I guess that goes back to were you waiting for 1 or 10 sets?

  I hope this helps.

• difference between control flow and check knowledge module

  Hello

  I know ckm and flow control. What is the main difference between the Frother and CKM?

  CKM is the model of knowledge that ODI will use to check all the constraints you create.

  Flow control is the way to a check constraint during the flow of an interface (it's way happens to you in your integration tables [temporary]). This method deletes the data of 'bad' and it will record in a table of $ E. Also, you have some option to recycle errors (next ODI run will try to reuse these data)

  Static control is another way to check your constraints. This is static as its name suggests and is average, it will only count the errors, but it won't do anything with the data. It might happens in the source tables.

  The most used method is the regulator of throughput with certainty, but static electricity has some advantages too.

  For example, flow control has only a little when you check duplicate data. When he found it eliminated the two registry (or more if there are more). It's average, you get nothing in the end.

  You can use the static control to check your sorce tables and create a process to eliminate or filter duplicate data, allowing only data duplicated to cross.

  Hope this can help you.

• Difference between the message and conversation

  What is the technical difference between a message and a conversation. Is that when multiple messages are in 1 conversation?

  A message.
  An email received or sent is a message.

  A conversation can be launched with a message.
  A conversaion can have messages, screw where the example: the 'Reply' button was used and enamel is spent here and there with the comments.

  If you select multiple messages in a list, they will be displayed below in the Message pane in the form xx number of conversatons.

  If you right-click on a message in the list and choose "open in a conversation." then it will open in a new tab showing all the emails included threaded, which are relevant to that conversation, both received emails and those you sent.

• Difference between the G20 and G25 models

  Hi people!

  I searched your laptop and I was amazed by the Qosmio.
  When I was going to order it, I noticed that there are many models of the G20 with different specifications. Also, I found G25 on internet research and found no difference between the G25 and G20 except receiver TV G25 is NTSC and G20 was released on March and G25 was in June. Instead, they have the same specifications for the hard drive.

  I live in the Portugal and the model Qosmio I can find that this is the G20-118. I was looking for the model that has 2 x 100 GB SATA HD, but cannot not thought about it.

  Internet research I found Qosmio G20-111 which has 2 x 100 GB SATA HD, but on the web page mentioned that it was a Pentium III processor (ridiculous, isn't?). I was looking for more reliable information.

  Already searched for toshiba pages and found no specifications for all models I found 490LS on the research on the web as the G20 - 102, 105, 106, 108, 109, 111, 118, 123,...

  Can someone help me with this? Are there any reliable web page where I can see the differences between the models? is there a .pdf or anyone who can please give me some advice?

  Money is not a problem at this time to acquire the laptop, I'm looking for only the laptop performance more!

  Best regards
  João Pereira

  Hello

  It of very difficult to say what camera is best, because there are many models with different parts.
  However, I found page with description of the G20 and G25.
  Take a look at this link.

  http://www.releasereview.com/Toshiba-Qosmio-G20-105-108-114.aspx?d=0101000580926052005

  Good bye

• What is the difference between the IO and line?

  Hi all

  I'm using Labview 7 and in my mahcine I have an installed 6013 card. However, there was an interface card designed by someone else long ago, on the table, only AO0, AO1,..., A07, DIO0, DIO1,..., DIO7 were printed. In the program, I saw some code to write to digital Line.vi allows you to send data to the digial io. Say that I write for DIO 3, so I understand here DIO 3 means the channel of e/s 3, but online? What is the difference between the channel and the line? When I write the data to a single channel of e/s, are us wriitng a byte or a bit of it? Thank you.

  A channel is usually used with inputs/outputs analog.  Each AI or AO is a string.

• 8.5.1 LabVIEW Student Edition - differences between the Mac and Windows versions?

  Hello

  I just bought the student of LabVIEW 8.5.1 version and I use Mac OS X 10.4.11. What are the biggest differences between the Mac and Windows versions, since the box came with a CD of installation of Mac and a Windows DVD Installer?

  See you soon

  Looks like you got the LabVIEW Student Edition Software Suite DVD.

  It comes with 6 boxes to tools, and the TME product, some (or all?) of those who are windows only (at least 8.5), for example:

  • Toolkit Digital Filter Design
  • Modulation Toolkit
  • SignalExpress
  • ...

  Since you have 8.5, you are missing also a few basic things that only recevied at the 8.6MAC support, like Mathscript, Control design and Simulation and native 3D graphics.

• Major difference between the Group and the organizational unit?

  Pls explain me what is the difference between the groups and the organization unit in simple terms with an example in real time.

  Hello

  https://en.Wikipedia.org/wiki/Organizational_unit _ (computing)

  https://en.Wikipedia.org/wiki/Group _ (computing)

  See you soon.

• What is the difference between HP Envy and HP Pavilion?

  Which is better and why?

  Hello

  Feel like machines are much bettr built and care generally superior to her ===> higher prices. A lot of people asking the same question such as:

  http://Forum.NotebookReview.com/threads/envy-vs-Pavillion.669607/

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/help-with-the-difference-between-the-envy-and-Pavilion/TD-p/2289959

  they are also designed to compete with other lines to other providers. Please read more information:

  http://en.Wikipedia.org/wiki/HP_Pavilion_%28computer%29

  http://en.Wikipedia.org/wiki/HP_Envy

  Kind regards.