Difference between the connector installation

Similar Questions

• new hard drive - what is the difference in performance between the new installation of Windows 7 or a clone of old hard drive?

  I get a new hard Hard Drive (SSD).  The new disc is the same size as my existing SATA drive.  I can do either a new

  the installation of Windows 7 or a clone old hard drive?  I would prefer to clone the old hard drive and keep all my settings, etc.   It's empirical data on the performance difference between a new installation of Windows 7 or to continue with the Windows 7 which was 3 or 4 years ago.

  I know the conventional wisdom is that the new installation is faster, but, no matter who actually tested and compared the differences?  I know I'll get better performance of the SSD the SATA drive, but I don't know if it's worth the hassle to do a fresh install and redo all my programs and settings.

  Others that the performance of the SSD you should not see any differences.  If you do, you can always do a clean installation later.

• Difference between the reset and clean installation of Windows 8

  Original title: reset or clean install

  Hello!

  I understand the difference between refreshing and resetting windows 8. But what is the difference between the volume where Windows 8 is formatting, then reinstall it and a reset?

  Hello

  The difference between updating and resetting of Windows 8 is quite simple.

  Reset completely reinstalls Windows 8 and saved nothing. Think of it as essentially formatting the drive and do a clean install.

  Updating done a clean install of Windows 8, but it copies your Metro applications, personal files, etc., in a temporary location that will be added later to the new facility.

  If you choose the reset option, you will be asked if you want to delete your files or clean the disc. You him more often always choose "delete my files" rather than "clean up disk" as the second option is more for when you sell your computer to someone else.

  Kind regards

  Patrick

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• 8.5.1 LabVIEW Student Edition - differences between the Mac and Windows versions?

  Hello

  I just bought the student of LabVIEW 8.5.1 version and I use Mac OS X 10.4.11. What are the biggest differences between the Mac and Windows versions, since the box came with a CD of installation of Mac and a Windows DVD Installer?

  See you soon

  Looks like you got the LabVIEW Student Edition Software Suite DVD.

  It comes with 6 boxes to tools, and the TME product, some (or all?) of those who are windows only (at least 8.5), for example:

  • Toolkit Digital Filter Design
  • Modulation Toolkit
  • SignalExpress
  • ...

  Since you have 8.5, you are missing also a few basic things that only recevied at the 8.6MAC support, like Mathscript, Control design and Simulation and native 3D graphics.

• What is the difference between the external SCSI cables and cables data acquisition

  Hi all, I would like to make a simple extension using an external SCSI cable and a NOR 184749/SH 6868. In other words, it would be: female HD68 bolt of the cable ends OR coupled to an external SCSI HD 68 male with a VHDCI 68 male cable. What are the differences between the external SCSI cables and cables as the (M) 6868EP of the CHS data acquisition. Other than the sex of the end of HD68 is usually on one. How is the posting hit buy using an external SCSI cable for an extension to tell a BNC-2090?

  Yes, I realize that NEITHER wants us to buy their cable, but in these economic times difficult, to do use all available resources, so I have to try,.

  Thank you

  joelowwatt

  Hello

  As long as you have compatible connectors, SCSI cables will work DAQ of basic functions.  They have the advantage of NO cables is that we can meet our DAQ hardware.  So, we can create pairs twisted differential pairs to HAVE, using the ground for shielding terminals and generally specialize the cable to minimize noise and crosstalk.  Because the SCSI cables are not specialized, you are likely to see the most noise and, if you go the sampling rates more Rapids, crosstalk.  If you are in a laboratory or factory with a good amount of noise EMF that your readings are not quite as clean, or if you have fluorescent lights you might see 60 Hz noise you might not see otherwise.

  If you want more details on the specifications of the SH68-68-EPM cable, I recommend these two articles.  The first example of the twisted pair and the principles of the SH cable shielding and the second gives the most precise specifications that you can compare with when looking for a SCSI cable.

  3GRD4C33 Knowledge Base: mapping list of the sons of SHC68-68-EPM & SH68-68-EPM cable

  1TGEHPDM knowledge base: detailed specifications for the SH68-68-EP cable

  Kind regards

• What is the difference between the stop and restart?

  What is the difference between the stop and restart?  I feel that stopping closed all processes, completely erases RAM memory and clears the cache of the processor.  I need to know if 1) this is a correct assumption and 2) which is better for daily maintenance of the system.  Thank you in advance.

  Hello Jeremy_1976,

  Your support when the judgment is correct. Basically, it stops the process and completely turns off your computer. Reboot, however, temporarily your PC stops, then turn it on again. This happens usually when Windows updates are installed. After installation, the system is restarted (rebooted) so that any update has been successfully installed and works as it should. You can be a little mixed upward the reboot and the hibernation. Reboot is, as I have indicated previously, basically a reboot of your machine. Ultimately, your PC is on again after a reboot. However, hibernation, stores all data currently in memory in a special file, then the PC turns off. When you then turn on your PC, that is, coming out of hibernation, hibernation files is used to restore the status of the PC than when you initially put into hibernation. In other words all the programs you had open before will automatically open and be ready to use hibernation.

  Hibernation or sleep for that matter is for short-term use. It is normal in Hibernate, or sleep if you want to be away from your PC for half an hour or so. If you leave more than I suggest you stop completely.

  A point to remember about hibernation is that, if you use put into hibernation, you can't, once you get out after hibernation, install programs or updates. You have to stop and restart normally to do.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• What does offline or online when you say: servicing an image Windows 7 to add the new application online? and what is the difference between the online and offline maintenance image

  What does offline or online when you say: servicing an image Windows 7 to add the new application online? and what is the difference between the online and offline maintenance image

  Your question it will be better answered in forum Windows 7 installation and deployment on TechNet:

  Windows 7 installation, Setup, and Deployment Forum

• What is the difference between the product key and product ID?

  What is the difference between the product key and product ID?

  I guess that thanks to my colleague Bruce Chambers, my question is answered. the product id is used subsequently and the key is used for installation. Thank you. See you soon.

• The difference between the ADR and ADF

  People,

  Hello.   I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University. I develop the application for Admission online for future student to apply for admission.

  I need to install Oracle ADF (Application Development Framework) or ADR (execution of Application Development) to run my application for Admission online web page for PeopleSoft Campus Solution 9.0, but I do not know the difference between the ADF and the ADR.

  My installations are below:

  Server machine: Oracle Linux 5.10 (64-bit)

  Client computer: Windows XP Professional (64 edition) with the Internet Explorer browser

  Architecture Internet Oracle Linux 5.10 Server:

  (1) database server: Oracle Database 11 g

  (2) the server application: Tuxedo 11 g

  (3) web Server: Web 11 g logic

  (4) browser: Firefox Mozila

  5) 8.53 PeopleTools and PeopleSoft Campus Solution 9.0 R5

  On the download page http://www.Oracle.com/technetwork/developer-tools/ADF/downloads/index.html , there are 2 packages to download:

  (1) execution of the 12.1.3.0 application development

  (2) oracle ADF essential 12.1.3.0

  My Architecture Internet of PeopleSoft as shown above has been working properly for a long time. Logical Web 11g works correctly. It seems that the first 'Application development performance' package also install logical Web server which is not necessary in my machine. In addition, ADR is not free, and we may need to purchase the license.

  Essential because ADF is free and without license fees, I chose Oracle ADF essential 12.1.3.0.0 to develop the application for admission online. I read his paper on http://www.oracle.com/technetwork/developer-tools/jdev/documentation/121300-cert-2164864.html

  9.0 Solution Campus system will be run by a University to do business formally.

  My questions are:

  First of all, what package is right for my application for Admission online Campus Solution 9.0? ADR or essential ADF?

  Second, if choose essential ADF, I have a few questions about the 12.1.3.0.0 ADF to match my installations as below:

  (1) as indicated in the document, ADF 12.1.3.0.0 can work with Oracle Linux 5 & 6 (64-bit) and other operating systems. ADF can also work with Windows XP? Can I install ADF with my Oracle Linux 5 server machine?

  (2) as indicated in the document, ADF 12.1.3.0.0 can work with Websphere Server Application. ADF can work with Tuxedo 11 g?

  (3) as indicated in the document, ADF 12.1.3.0.0 can work with the Firefox browser. ADF can work with Internet Explorer in Windows XP?

  Thanks in advance.

  If you want to use essentials, you must download the package from the essential. ADR is the complete stack where you must purchase a license.

  Timo

• What is the difference between the model and its clone in VMware?

  What is the difference between the model and its clone in VMware?

  Clone

  A clone is a copy of the virtual machine.

  You can't convert back the cloned Virtual Machine.

  A Clone of a Virtual Machine can be created when the Virtual Machine is running

  Cloning can be done in two ways: Clone full and linked Clone.

  A full clone is an independent copy of a virtual machine that shares nothing with the parent virtual machine after the cloning operation. Continuous operation of a full clone is entirely separate from the parent virtual machine.

  A linked clone is a copy of a virtual machine that shares virtual disks with the virtual machine of parent on a regular basis. This preserves disk space and allows multiple virtual machines to use the same software installation.

  Cloning of a virtual machine can save time if you are deploying several similar virtual machines. You can create, configure, install the software on a single VM and then clone several times, rather than the creation and configuration of each virtual machine individually.

  Model

  A model is an original copy or a reference image of a virtual machine that can be used to create many clones.

  Models can be turned on or edited and are harder to change than usual of virtual machine.

  You can convert the model to the Virtual Machine update model base with the latest released patches and updates and to install or upgrade any software and still convert to template to use for the future deployment of Virtual Machines with the latest patches.

  Convert virtual machine model cannot be performed, when the virtual machine is running.  Only the Clone to the model can be performed when the Virtual Machine is running.

  A model offers a safer way to preserve a virtual machine configuration that you want to deploy several times.

  When you clone a virtual machine or deploy a virtual machine from a template, the cloned virtual machine resulting is independent of the virtual machine or the original model.

• What is the difference between the Firefox for android and Firefox beta

  I noticed in the store of Google play there are two applications of Firefox. What is the center of the difference between the two Firefox browser for android and Firefox beta.

  Firefox for android is just the regular and stable browser that is recommended. Beta of Firefox for android is the next version of firefox that is in beta (test yet, but almost ready) step and is not ready for an official release because he has a few folds and fixes to do. But firefox for android beta has some of the features the most recent Firefox should be released soon as an official version.

  The current version of firefox for android is 34.01.
  The current version of firefox for android beta is 35.0.

• Y at - there a big difference between the base of the m3 and m5 models?

  I had my m3 2016 Macbook for a week so just thought I would ask so that I have time to exchange it if need be. I wondered outside storage space, y at - it a big difference in processors Core of m3 and m5? Apple uses a "customized" version of the processors? I ask because Apple lists the m3 1.1 Ghz but not apple models are call at 900 mhz.

  The processor is clocked at 1.1 Ghz. There are different models made by Intel, including that which is supposed to be clocked at 900 Mhz. Apple does not use a customized version of the CPU. The differences between the M3 and M5 model is displayed on the Intel Web site. Among the differences are the M5 is clocked at a higher speed and the M5 is generally about 15-20% faster than the M3 at the same clock speed.

• What is the difference between the export photos and pictures of unmodified export

  I'm trying to export my library of photos of 30 GB on a hard drive. When you choose file > export gives two options: export the Photos... and export Unmodified Original...

  Is there a difference between the two options?

  When I export the location data is backed up?

  The original unmodified are image files full-size that have been imported into the library at the start.

  Export Photos will give you the edited version (if it is edited).  Also, you will have a chance to change the size of the file (Mbs) and/or the image (pixels) size when exporting and to change the JPEG, tiff or png.

  

• Differences between the Mac Pro 2009, 2010 and 2012 Logic Board

  What are the differences between the logic board in the Mac Pro 2009, 2010 and 2012? In particular, what are the differences in the logic board between the MacPro4, 1 and MacPro5, 1? When a 2009 logic board is updated to 5.1 firmware is identical to the logical tips 2010 and 2012? Updated to 5.1, what is happening with the SMC firmware?

  Answers in-depth in this type of broad would be book-length responses.

  Where are you going with this?