Different auto update for Vista and Windows 7

Similar Questions

• Should Microsoft Vista drivers operate printer Brother HL-1240? I recently downloaded updates for Vista, and now I can no longer print on my printer Brother HL-1240.

  Drivers Vista MSN

  Should Microsoft Vista drivers operate printer Brother HL-1240? I recently downloaded updates for Vista, and now I can no longer print on my printer Brother HL-1240. Updates are perhaps the cause of this problem? If this isn't the case, please let me know if I get the problem somewhere else.

  Hello

  Your question is could a Windows Update may be charged a wrong Brother Printer Driver? Yes.

  One way to know is to look in the history of updates to see what has been installed and uninstall then one that seems incorrect.

  If you are an update of the Microsoft printer driver note that Microsoft updates pilot equipment for other manufacturers are not normally updated.

  Here's how to uninstall specific updates;

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  If an update is the problem and stop it reinstall > list of updates to install > right click on the incorrect update > UAC prompt > and then click Hide.

  See you soon.

  p.s. Always get the latest updates of the driver from the hardware manufacturer.

  Also would it be a good idea if above does not work to download the last direct Brother printer driver; If necessary reinstall your printer...

  http://www.brother-USA.com/downloads/default.aspx

• KB25844146 & KB2620712 are updated for Vista - "isntalled windows is not updated version"

  original title: KB25844146 & KB2620712 are updated for Vista. Fails to install each timed

  Updated repeat myself that kb25844146 & KB2620712 are updates for Vista Home Premium fails to install every time. Bulletin says its for XP. Installation downloaded and tried of puter is back with "windows installed is not version update". Have Vista home Prem SP2/32-bit. Using trend micro security. Help?

  Hello

  1 did you change on your computer?

  2. how you try to install this update?

  Method 1:

  I suggest you to reset the windows update components and check.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  I also suggest you to see link and check.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3:

  I also suggest you perform the clean boot and then try to install the updates and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

• Re: Satellite A300-1 b 9 - cannot install updates for Vista and IE8

  Hello

  I have a Toshiba Satellite A300 1 9 b I bought 9 months ago. It has Vista Home Premium 32 bit SP1. I have serious problems with the updates:

  1 Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86 - I can't install this for the last two months. Whenever it appears that the installation has failed.

  2 security Update for Windows Vista (KB961501) can be installed as well

  3. my Internet Explorer 8 does not work for the past two weeks. I tried to download it and when I did, then, my computer does not restart. I had to use sans-echec Mode, uninstall IE8 to return to Normal Mode

  4. I also tried to download and install SP2 for Vista, but it failed.

  I am very worried. Please suggest me what I should do.

  Thanks for your help.
  Stéphane

  I think that the decision of the antivirus program is a personal opinion

  I put t like McAfee and Norton because they need a lot of system resources and do a slower computer.
  I prefer AntiVir and Kaspersky Security suite. The two programs have good scan engine and don t need a lot of system resources. They are easy to use to use it.
  AntiVir is free but it s just an antivirus. Kaspersky Security suite also contains a firewall, antispam filter and more.

  It s your choice what program you are using. ;)

• Not receive updates for Vista and get message WindowsUpdate_80070422

  Continue to be WindowsUpdate_80070422 message when checking for updates. Entered servises and windows update to change automatically, as it was on automatic (delayed start). Applied, but I cannot click on start on the status of the service. If anyone can help?

  Please answer each of the following [admittedly tedious] diagnostic questions in a list numbered corresponding type in your very next answer, preferably without quote my post:

  1. when (date about) have you buy the computer?

  1B. is this a Vista 32-bit or a 64-bit computer?  See http://support.microsoft.com/kb/827218

  c. 1, which manufactured the computer (for example, Dell;) HP; Lenovo; Toshiba)?

  have 1. you ever had the opportunity to do a repair installation or a clean installation of Windows Vista?

  2. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires? What (other than Defender) anti-spyware applications are installed? What third-party firewall (if applicable)?

  3 a Norton or McAfee application ALREADY installed on the computer as you bought?

  4. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer When you bought it? (No matter if you have never used or activated).

  5 KB3154070, KB3158991, KB3156013, KB3156016, KB3156019, KB3155178, KB3141083, KB3153171, KB3153199, KB3156017, and/or KB3142023 listed in installed updates (not update history)? [1]

  6 assuming that Java is installed => is 91 update Java Version 8 (or higher) installed? TEST HERE in USING INTERNET EXPLORER ONLY! -online http://java.com/en/download/uninstallapplet.jsp [2]

  • Java Update: the Patch or pitch it
    http://krebsonsecurity.com/2014/07/Java-Update-patch-it-or-pitch-it/
  • It's time to disable/uninstall Java?
    http://securitygarden.blogspot.com/2013/01/Java-zero-day-again-time-to.html

  7 is Adobe Flash Player v22.0.0.192 (or higher) installed? TEST HERE in USING INTERNET EXPLORER ONLY! -online http://www.adobe.com/software/flash/about/

  8. What number of Update Version & KB are displayed in the second line of text using IE9. [Alt + H + A] tab. for example, Updated Version: 9.0.54 (KB9876543) ?

  9 is Firefox version 47 (or higher) or Google Chrome 49.0.2623.112 [sic] or any other alternative browser installed?

  10. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Comprehensive care system; Glary Utilities; Registry Booster; McAfee QuickClean; Own fast AVG; AVG PC TuneUp; Norton Registry Cleaner; Norton PC tune-up; PCTools optimizer; SpeedUpMyPC; FixMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. Registry Cleaner CCleaner component)?

  ===============================================
  [1] start | Control Panel | Programs and features. See installed updates (in the left menu)

  [2] no need to install Java if it isn't already installed.

• Halo 2 for Vista and Windows 7 64-bit: does not. need a solution

  I JUST BOUGHT A NEW HP LAPTOP AND TRIED TO LOAD HALO 2 THAT I BOUGHT TOO RIGHT. IT DOES NOT WORK. WHAT I AM DOING WRONG? I TRIED ALL THE SUGGESTIONS IN OTHER FORUMS. PLEASE HELP ME. Thank you.

  Take a look at these discussions in the forum for Games for Windows.
  http://forums.gamesforwindows.com/t/8958.aspx
  http://forums.gamesforwindows.com/p/8000/74420.aspx#74420
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am trying to install updates for vista and they failed with code 80070005 can you suggest what I can do

  There is no on several occaisions.

  Hi martyn jamsedwards,.

  Follow the troubleshooting steps in this thread . They helped to resolve the Windows Update 80070005 error for other users.

• Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

  There is a problem with the 64-bit, Vista, Windows 7 and Windows 8 or 8.1 drivers which causes the spooler crash with the following HP Deskjet printers:

  DeskJet 710

  DeskJet 712

  DeskJet 720

  DeskJet 722

  DeskJet 810

  DeskJet 812

  Deskjet 820

  DeskJet 822

  DeskJet 1000

  The attachment contains a fix for this problem for Vista and Windows 7.

  [The patch does not work for Windows 8, 8.1, or 10 x 64 systems.  There are efforts to this address, if a solution is developed it will be shown here.  [{Edit - I did not progress by getting the patch to run in Windows 8 x 64.}]

  First of all make sure that the driver for the installed printer.  If the driver has not been installed go to start devices and printers, add printer, the local printer, choose the appropriate port (for the converters, USB-parallel, the port likely USB001: or maybe USB002 :), then click Windows Update then choose HP for the manufacturer and select the appropriate printer.)

  Apply the patch as follows: log in to the computer with an administrator account.  Download the patch by clicking on this link or on the trombone at the end of this post.  Save the hotfix on your computer, then unzip it.  Then, copy the three DLL files in the following directory: %windir%\system32\spool\drivers\x64\3

  Note that %windir%\System32 is a system variable that points to the location of the Windows directory. For most systems it will be C:\Windows.  You can click Start, computer, and type %windir%\system32\spool\drivers\x64\3 in the address bar and it is in the right place.

  This can be done from a DOS command prompt if BACK is opened with the "run as Administrator" command or to explore with a copy and paste.  Depending on your UAC settings, you may need to provide confirmation.  Also allow existing files to be replaced if you are prompted.

  This patch is not necessary and should not be applied to a 32-bit version of Vista or Windows 7.

  Thanks to extraordinary Microsoft engineer Alan Morris forguidelines for patch.

  Update - here is that of the more detailed installation instructions:

  Download the patch on the DJ_Patch.zip at the bottom of the page and save it on your computer.  Now click on the file and open it, and then extract the fix in a directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative BACK prompts by clicking Start, all programs, accessories, and then right-click on CMD. EXE and select run as administrator. Click in the DOS window, and then type the following command:

  MD c:\temp

  CD \temp

  Now extract the patch files in the c:\temp directory (all, extract c:\temp chose as a destination).

  [Update - Windows security settings can prevent these files from being used, please open computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties.]  If there is a message indicating the properties file has been downloaded from the internet and can be blocked and then unlock the file before continuing.]

  Then, click back to the administrative DOS prompt and type the following: (the green stuff are comments, do not type them...)

  *. DLL DIR (just to check that the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others).

  Net stop spooler (ensures that the files are not in use.)

  Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)

  Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)

  Hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000 copy)

  NET Start Spooler

  Output

  [Edit - note that these DLL files will already be in the directory.  You will get a warning asking if it's OK to replace the files, say "Yes".]

  At this point, the patch is installed and ready to print.

  Note that here printers do not support USB connections, they have only the parallel ports. [Edit - if your printer has a parallel port to use, it will be probably much less problematic than the use of a converter USB / parallel].   If you use a make you converter USB / parallel it is supported in your operating system.  The following messages are reported by cables USB-parallel that are supposed to work in Windows 7.   A driver is required for the converter USB / parallel besides the driver of the printer.  For converters supported, it is usually provided automatically in Windows 7.  Note: the appropriate to select for USB-parallel converter port is often USB001:.  I've heard of cases where the port was USB002: or LPT3: as well.  If the port you are using is unable (after applying the fix) try to change the port by going to start, devices and printers, right-click on your printer and select printer properties, then click the Ports tab.

  Mick4 wrote: the problem is that I only could unzip the 3 dll files but don't know how to replace the bad dll files. Mick 4

  If you use Windows 7 do the following: log in as a user with the administrater properties.  [The following assumes that you are using IE as your browser] Click on the here link and select "Save".   Once the download is complete, select "Open folder", then right-click on the DJ_patch.zip file and select extract all.   If extract all is not an option, then click on "Open with" and select Windows Explorer.

  

  Leave the default directory and check the box "Show extracted files when you are finished", excerpt.   Click Start, computer, and type % windir%\system32\spool\drivers\x64\3.  Arrange the windows so that you can access the two parts of the window.  Go in the first pane and select the three files dll, hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll.  Now drag and drop them to the % windir%\system32\spool\drivers\x64\3 window, select copy and answer to 'replace' in the dialog box.

  Note: %windir%\System32 is a system variable that points to the Windows directory.  For most systems it will be C:\Windows, but it can vary depending on the configuration of NDO of hardware configuration of the computer.  If you type %windir%\SysWoW64\cmd.exe in the address bar in Explorer or in start, search programs and files, it will find the right directory.

• Important updates for Vista SP2 Security Installation failure: update MSXML 4.0 SP2 (KB927978) AND (KB954430) security, citing error Code 652, Windows Update encountered an unknown error!

  Has no significant updates for VISTA SP2 security installation: MSXML 4.0 SP2 (KB927978) security AND (KB954430), citing error Code 652, Windows Update encountered an unknown error! How is it Windows Update does not recognize it's own mistakes? I tried several times to install both of these important updates without success. Please help me so that I can install these two updates & get back on the right track. Thank you!

  See the section "How to get help", for example, http://support.microsoft.com/kb/927978

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Google Chrome message "this computer will stop soon receive updates of Google Chrome for Windows Vista and Windows XP.

  Is someone can you please tell me when Google Chrome will stop supporting 2007 Service Pack 2 for Windows Vista Home

  Go Mary

  I posted a substitution for Vista and XP operating systems. Please follow my instructions in this thread, or switch to Mozilla Firefox or Opera browser:

  http://www.MSFN.org/Board/topic/175099-instructions-Google-chrome-end-of-support-VistaXp/

  I always highly recommend to switch to Mozilla Firefox, Opera, or one of many other supported browsers.

  While my dose turns off the message, you will NO longer receive updates of Google Chrome.

  Given that Microsoft will support Vista at least a year, I don't understand Google dropping support early reasoning.

• Window update for Vista didn't and now it stops when I use all the features.

  I did my update for Vista window and now it stops when I use all the features. I use Google Chrome and the recent update adds Bing Bar.

  Hi Izzy2222,

  ·         Did you put any power on the computer plan option?

  I recommend to open Event Viewer and find the exact description of the error. The newspaper of errors in your next post relay.

  See also: What are the information contained in the logs of the event (Event Viewer)?

  In the meantime, follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the results.

• The update of Windows 8 for Vista and XP is gone! Why it has been deleted

  The update of Windows 8 for Vista and XP is gone! Why it has been deleted

  Moved to install Vista, upgrade, and activate Forum.

  http://Support2.Microsoft.com/GP/lifewinfaq

  7. What is the policy of the policy of Support for Windows 8.1?

  Windows 8.1 is part of the same strategy of life cycle of Windows 8 and reaches the end of the main Support on 9 January 2018 and phase end of Support extended on 10 January 2023. With availability General Windows 8.1, customers on Windows 8 2 years, until January 12, 2016, to move to Windows 8.1 to be taken in charge.

  See you soon.

• KB2655992 and KB2698365 updates are for Vista and Win 7. Why my automatic update XP machine say I need them, then can not install them?

  Auto update on my Windows XP (SP3) checks every day, then trying to download and install the updates above that are for Vista and Win 7 systems. If I try to download and install manually, the XP machine has no idea about mail file ".msu" on these updates. My PC tried to install these on a daily basis since July 11, 2012.

  Thank you

  Hello

  Using Windows XP 32-bit or Windows XP 64-bit?

  KB2655992 and KB2698365 are also updated in security for Windows XP. I suggest to perform the clean boot, download and install the updates from the Download Center.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Update security for Windows XP x 64 Edition (KB2655992)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30220

  Update security for Windows XP (KB2698365)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30228

  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

• error code 80070673 for windows update for vista

  error code 80070673 for windows update for vista

  Hello Jwisetoyo,

  Thank you for your message.  Please click HERE for a possible solution to your problem.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• Difficulty for the file attribute "Update time" a file hive of the registry update on XP and Windows Server 2003

  "Time modified" attribute of a file file the registry hive is updated when you load and then unload the registry hive files without making any changes to the files on a computer that is running Windows Server 2008 or Windows Vista, or Windows 7

  I see a hotfix is provided for Windows Server 2008 or Windows Vista: http://support.microsoft.com/kb/973148/ and for Windows Server 2008 R2 or Windows 7: http://support.microsoft.com/kb/983544

  Question: I want to know if this problem is also present in Windows XP and Windows Server 2003, and if so, we have a solution already for XP and Windows 2003?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en/category/windowsserver/