different between applications and APLLSYS

Similar Questions

• OAM behave differently between IE and Firefox/Chrome

  I use programmatic authentication to enable and authenticate the user, but when the user runs an activation, the user passes through the

  Activation process:

  1. the user enters information base (name, e-mail address)

  2 web application generates an activation url and it automatically sends to the user

  3. the user clicks on the link and a web application opens and a pop place for new password and security issues

  4A in IE once the user sends the password and ask the user remains connected

  4. in Chrome and Firefox, once the user submits the responses and the password, the user is lgged out and displays a sign in page.

  I compared the newspapers, I don't see any errors, I also used a violin and I noticed that in Chrome and Firefox there is an additional OAM_ID cookie in the response.

  Someone saw a difference between IE and no behaviors IE browsers or have any suggestions to fix/GET this problem?

  -Ahmer

  IDM SK,

  I was on vacation the past two weeks and didn't see your response, however, we have solved the problem by changing the policy to exclude the pages associated with the activation URL. This seems to have solved the problem.

  Does not have full feeling for me right now, but it seems to work.

  -Ahmer

• What is different between the and oracle tutorial and taken that auto study of oracle - in addition to the cost?

  What is different between the socket and ware course oracle and making that auto study of oracle - not to mention that the cost

  I would take oracle 12 c performance and tuning.

  I noticed its a lot cheaper as self-training which is web access for a year.

  However, self study does not prepare you as well as the oracle himself.

  Thank you Roger

  UO has four types of training: classroom, virtual Live, training on demand and self study.  The first three are all variations on the same thing: a human being a conference accompanied by a Powerpoint presentation.  The only difference is the specific method of delivery.  I took a dozen or more courses in the classroom, when I worked for Oracle, but none of the other three.  I don't know that they still existed at the time.

  Self-study courses are completely different.  They are not recorded training sessions (or they would cost the same as TOD). They seem to be created by Skillsoft computer-assisted training courses. There are some demos available on the OU Web site. Go to the following URL and click on the tab "Demos'", just above the section asking you to select a product area:

  Self-study courses | Training | Oracle

  That said, it is not yet an option available for the course self-study: Oracle 12 c database: performance management and Tuning.

• The different between OBIEE and BI Publisher

  Hello

  1. What is the difference between OBIEE and BI Publisher? because I read the user guide and are not getting the point

  2 and what decision of real time data for?

  Thank you

  Hello

  Oracle BI Publisher is part of the Oracle BI Suite Enterprise Edition
  Oracle BI Publisher separates the creation of the data and the process shaped for different uses.

  Oracle Business Intelligence Foundation Suite (OBIEE) is a unified architecture and full, open business intelligence system
  for the company that provides reporting capabilities, but query ad hoc, and analysis, online analytical processing (OLAP), dashboards, and scorecards.

  Destination main Oracle BI Publisher (IMHO) is so formatting of data (models, printable forms) for different uses.

  Best,

  Ark

• What is different between iPod and iPhone

  Feel it between iPod and iPhone please.

  Basically an iPod is an iPhone that is not making telephone calls.

• What is different between CRS and CRSd?

  RHi dears. I read some tutorial on oracle RAC. Unfortunately, I don't understant difference between CRS and CRSd. could someone explain please?

  process is the name of the program (crsd.bin) OS (CRS) Service-related. When you start the service (crsctl start crs) CRS, it start crsd process, then launch other processes (for example: ocssd.bin, octssd,...). As when you start the database Service (Instance), he start several background process (pmon, smon,...)

  Thank you

  Amit

• VISA writing differs between TS and LV Run - Time Engine development agencies

  Hi all

  I made a request on LabVIEW to test the BERs (Bit error rate), and I used the Write VISA between two COM ports to Exchange data.

  Everything works great using just of LabVIEW.

  Later, I used TestStand to call my application (VI). Adapters of LabVIEW TestStand have been set by default on the development system , and everything works OK!

  Finally, I had to disable the development system and to define the types of adapters LabVIEW of TestStand for LabVIEW Run-Time Engine and I noticed that the speed of the exchange of data between two COM ports significantly decreased.

  The only difference was the speed... because all data (changed slowly in this case) happened correctly on the other COM port too.

  The symptom was the same that decrease baud rate... but baud rate and all other configurations remained the same. The only difference was the change between the development system for the runtime to notice this reduced speed between the data exchanged using VISA Write.

  All the solutions for this?

  Thanks in advance

  João

  Hi all!

  I'm sorry, I forgot to reply to this thread...

  Solution was change the way VISA WRITE of "asynchronous" to "synchronous" to book a thread just to WRITE visa.

  The problem here was something like this (?): TestStand used all available threads and when we wanted to WRITE of VISA, the thread has been busy and VISA would wait until the wire emerges. After changing to syncrhonous, there was a thread dedicated to this process (?).

  Now, everything works the same using LabVIEW Run-Time Engine or system deployment.

  Thanks for the help Chris and Norbert :-)

  João

• Muse different between Mac and Windows versions

  Me and a friend wanted to test Adobe Muse and we have installed the trial version for 30 days. I did it on my Mac. My friend on his Windows PC. I tried Muse, and when I wanted to show what I have done to my friend, I went to him with the .muse on a USB key file. Us, where he is very surprised that the Muse on the Windows PC could not open the file I did on my Mac due to versioning problems. We compared versions of Muse and... they are different (on Mac: 2014.2.0.569, 787027 CL; Windows: 7.4 V build 30, CL 784238). It is a problem because we wanted to develop as well on the same site, of course not at the same time, but by the way the .muse one to another file.

  Is it normal that versions between platforms is not synchronized?

  Thanks for responding!

  Marc Verschueren.

  Hi Marc,.

  The version of Muse in the machine of windows of your friend is not the latest version, this could be because of the previous installation or windows machine technical specifications are not met.

  Please check the system requirements for windows for output CC 2014:

  http://helpx.Adobe.com/Muse/system-requirements.html#Muse CC Configuration required

  Kind regards

  Akshay

• generated querys SQL are different between DEV and PROD environment

  Hello
  
  I have a problem with the results of the querys in response, I get different results with the same repository, the same query in Answers (catalog), same OS... between DEV environment and PROD environment. The generated SQL querys are also different.
  
  The BI vesion is 10.1.3.4
  
  Any idea on this issue?
  
  Concerning
  
  Guillermo

  You have two queries in dev because you use for a table of two logical source:
  * VEIS_HECHOS_ACUMULADOS
  * and VEIS_HECHOS_GLOBAL

  How OBIEE select this table? This tables are selected if:
  * all of the columns in the answer belongs to the source table
  logical level of each source table is defined with the same parameters for the table two source

  This is the case for you?

• Windows 7 sounds decreases between Applications and devices (Dell Vostro 1015)

  I'm having a problem where all that sound comes from applications Stoops when he goes to the peripheral output. To illustrate the problem, here is a picture of what's going on.

  

  I turned on and turned off all the improvements, changed options of exclusivity and changed the format of sample rate.
  I know that's not a hardware problem, because sometimes the speaker will be a decent volume, but only temporarily, usually until when I update the volume in firefox or another application that I use for sound.
  The thing that triggers this turns on the improvement of Loudness equalization, change my 24-bit, 192000 Hz sampling rate and by checking the boxes 'allow applications to take exclusive control of this device' and 'give exclusive mode applications priority '.

  Hey Evan,

  Thanks for posting your query in Microsoft Community.

  There could be possibility of hardware problem. However, let's try the following and check.

  Run utility troubleshooting for discover connection issues that may exist, the instructions are below:

  Click Start > Control Panel

  Type of troubleshooting in the top-right search field > select "troubleshooting."

  Click "Hardware and sound" > select "play Audio".

  In addition, please refer to the tips in the article below and check.

  No sound in Windows

  Tips for solving common audio problems

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• What is different between sd208t and sf90d

  Hello

  Nice day.  I need to ask if what is the main difference between a SD208T and SF90D.  Aside from the price which SF90D less than the SD208T and SF90D replaced the SD208T, what else these two is the difference?

  Thank you.

  Hey Rey, there here's a post that is underway, you can keep an eye

  https://supportforums.Cisco.com/message/3771164

  But, to answer the survey, SD208T-NA is not a replacement to SF90 transition for the NA (models of North America). The replacement model for the version NA is the SF100D-08-NA.

  The SD208T-EU, KR, RU have respectively a Desequilibrio to SF90D-08-AS model, SG and KR.

  Are you interested in the EU, models KR, UK or North America / Australia transitions?

  -Tom
  Please evaluate the useful messages

• Different between primary and logical partition?

  Referring to the next video, after a free space for the new partition, I create partition, which show the logical drive (blue color), but the other partitions are of primary partitions (blue color), I would like to know it possible to create a main drive instead of logical drive partition, and what difference is between the primary and logical partitions.

  There is an option to delete a logical partition (drive D :), after you remove it, can he create a new primary partition?) Through this process, it will cause no problem on the primary partition (drive c :))?

  Is there an advantage to have a logical partition (drive D :)?

  In the future, if I need more space in C: drive, it will be easier to extend the primary partition (drive c :)) with logical partition (drive D :)?

  If a logical partition (drive D :) convert primary partition, it will be easier to extend the primary partition (drive c :)) with primary partition (drive D :)?)

  http://www.YouTube.com/watch?v=jKW6ROWZ5yU

  Does anyone have any suggestions?

  Thanks a lot for your suggestions

  Hello

  Thanks for posting your query in Microsoft Community!

  According to the description, it seems you want to know the differences between the primary and logical partitions.

  I'll be happy to help you with this.

  I suggest you to refer to the following articles and check if it helps.

  Understanding Disk Partitions

  http://TechNet.Microsoft.com/en-us/library/dd799232 (v = ws.10) .aspx

  What are partitions and logical drives? (Applies to Windows 7)

  http://Windows.Microsoft.com/en-in/Windows-Vista/what-are-partitions-and-logical-drives

  If you have any questions on Windows, feel free to let us know. It is our pleasure to be of service.

• Color and/or modes of merger and/or the effects appear to be different between AE and SOUL

  First of all, I'm relatively new to CC.  Until now I am almost exclusively in love.  One thing I'm not too happy with that is the need to use the Media Encoder in After Effects to render to "broadcast formats.  I guess I understand global change, but it is annoying when you do iterative work of customer.  "Just use the Media Encoder!"  Right!  However...

  I use a lot of additive mixing in 32 bits.  It looks different if I make in After Effects vs the Media Encoder.  The Media Encoder does not manage correctly the "clearer".  Things are not "bloom" to white as they do in After Effects (and, especially, the way I want what they).

  Something is twisted?  I understand some related to the color adjustment or blending modes?

  It has never worked right since SOUL was introduced. You need make an intermediate file to convert to SOUL when working with 16-bit or 32-bit even.

  Mylenium

• Different between DataGroup and list

  I create a custom layout. When the different use of the parent container. The result is different.

  When I use the list with my layout. There is always an error

         for(var i:int = 0; i< childsCount; i++)
                 {
                      //get the current element
                      //
                      //the currentElment always null when use List
                      //when use DataGroup everything works fine !!
                      var currentElement:ILayoutElement = targetContainer.getElementAt(i);
                      
                      currentElement.setLayoutBoundsSize(NaN,NaN);
                      
                      currentElement.setLayoutBoundsPosition(arr[i].x-20, arr[i].y+30);
                 }
  
  
  

  The other question is to use the healthy blendMode of mind to the DataGroup and component List has different results.

  If I understand correctly, you have a layout that works in a DataGroup, but does not work in a list.

  I suspect that it is because the DataGroup component uses no virtual provision by default, but the List component does.

  To confirm, this is the case try using a DataGroup with your layout and useVirtualLayout true on this provision:

  right = "0" left = "0" top = "5" low = "200" cacheAsBitmap = "true" blendMode = "overlay" >

  If which certainly not, then you know that this virtual provision is the issue.

  If you do not need virtual presentation, then you can turn it off by setting useVirtualLayout = 'false' directly on the list (notice that is different from how you toggle useVirtualLayout on a DataGroup where the property is in the layout).

  If you need virtual layout then you will find this post useful to learn how to make your virtual support custom presentation layout: http://flexponential.com/2010/03/06/learn-how-to-create-a-simple-virtual-layout-in-flex-4/

• Different between as and '='

  Hello
  
  I have a problem with the '=' sign, I found that (= 17 June 09 ') was different with (like June 17 09 '), '=' does not show a record then when I change of as it does. It is '=' are inappropriate to assign a Date? Can give some examples of how to properly use = and as?
  
  
  Thank you

  Hello

  As I said in my previous post use date as long as the dates and strings as strings. With dates, it is preferable to use masks, the to_char to_date.

  Kind regards