HP Pavillion Smart Touch: Wi - Fi connectivity issues

Hello everyone, this is my first post so I hope I'm doing this right!

Recently, I changed my wifi password on my router or my security key because the neighbors were using my wifi without knowing me.

Since the change, I can no longer connect my laptop HP pavillion wireless to uness wifi manually, I go to the router and do it from there.

Is anyway to fix this? Whenever I try to connect with the correct password, it is said

"Some information may have changed since the last time you logged in, some additional information is needed.

Can someone help me please!

Thanks in advance!

Hello @Robbins52

There is!

We sow step by step instructions how to remove or "forget" registered wireless setting so you can connect fresh with your changes.

http://www.digitalcitizen.life/how-delete-or-forget-wireless-network-profiles-Windows-10

I hope this helps!

Tags: Notebooks

Similar Questions

  • HP Pavillion Smart Touch 15: turn on computer, says please wait or AutoFix and then the screen turns white. Goes no further

    My computer was las night. I turned it on this morning and it says the auto repair or please wait a few seconds then screen goes black or white. It doesn't let me do anything else. It is located on a white screen. Help, please

    Hello

    Here's the follow up:

    -You cannot restore your files once the HARD drive goes 'bad '. You can try to start the computer by using a few Linux based Live rescue CD, but chances are very small

    -You can not restore factory default before replacing the HARD drive as the old is defective. You must insert a new and then restore because the information is indeed stored on the HARD drive (new)

    -If you know how and where you can event the same HDD - manufacturer 678312-002

    If this is not the case, just use some as suggested above and as explained in the guide Service and Maitanance.

  • connectivity issues mobile iPhone 7

    I have a new iPhone 7 jet black, so far I'm in love. But yesterday, I noticed an annoying problem. The phone loses the network connection (cell to the & t) and he no reconnect, it will remain just it saying no service. I have to go in airplane mode and outside to force it to look for the network connection.

    everyone knows this? and everybody understand what it could be?

    I already missed messages and a phone call. This could worsen as boring to become a problem. If anyone has any idea what this could be please give me a heads up!

    OH! Another thing I noticed, when the iPhone is connected my signal strength went from-102 to my 6 sec to-86 on my 7! Then when I am connected I am connected!

    Hello jpgraphx,

    Thank you for using communities Support from Apple. I know have a cell connection issue on your new iPhone, it's not what you expect. The good news are the following steps will help to solve your problem with loss of cellular data and see no Service and get your new iPhone works properly again.

    If you cannot connect to a cellular network or cellular data

    See you soon!

  • Keyboard Smart ipad pro, lost connection

    Hello

    Why my smart keyboard sometimes lost connection with the pro 9.7 "ipad. Then after rebooting the ipad it works again. But its always like that. Is there any problem or how to fix it?

    Thank you

    Hi Budi73,

    Welcome to the communities of Apple Support! I'm sorry to hear that you are having these problems with your iPad Pro and your Smart keyboard. Since the Smart keyboard uses the contacts of the Smart connector on the side of your iPad Pro, if you are having problems with intermittent or loss of connections, you can check the contacts as described in the following article:

    Get help

    If your iPad Pro does not detect your Smart keyboard or you see an 'Accessory not supported' alert on your iPad Pro, make sure that there are no debris or plastic on the pins of the Smart connector on the keyboard or the Smart Connector on the iPad Pro. Also, try the following steps:

    1. Make sure your iPad Pro and Smart Keyboard are in a position to Type .
    2. Remove the Smart keyboard for your iPad Pro.
    3. Restart your iPad Pro.
    4. Reconnect the Smart keyboard.

    Use your Smart keyboard with iPad Pro - Apple Support

    Concerning

  • iPod Touch will not connect to iTunes

    My iPod Touch will not connect to iTunes. When I connect it to my laptop with the cable my laptop USB recognizes the iPod begins to charge and 10 Windows asks me if I want to open it to view files, but it seems to treat it as a camera and I just want to know if I want to get pictures on it and on the laptop.

    I made sure I have the latest software updates on the iPod and iTunes and thought this would fix the problem, but iTunes still does not recognize my iPod because it never appears on the Panel for me to sync things for her, etc.

    How can I get my iPod to be recognized by iTunes again? Very recently, it stopped connecting.

    If your computer does not recognize your iOS device, follow the steps proposed by Apple.

    https://support.Apple.com/en-us/HT204095

  • Mac pro wi - fi connectivity issues

    I have the same problem, it seems that many people have with Wi - Fi connectivity issues.  I just bought the Macbook Pro in December 2015.  My computer goes to sleep and when I open the hood it looks like I'm connected to wireless, but I'm really not!  I'm going to websites, and they won't open.  I disconnect my wi - fi and reconnect and sometimes it works, but sometimes I actually have to restart my computer.  For the moment, at the end of the day I'll stop my computer, then restart the morning I guess.  It sometimes seems to lose its connection during the day too, I guess because he falls asleep.  Very frustrated.  Just got this computer in December and have had this problem since I use the computer out of the box.  I was told it's because I haven't had my update of El Capitan, did, but it wasn't the problem.  Technical support suggested a few other things we also went through and those who did nothing either.  Don't know what the problem is or how to solve this problem, or even if I can if so many others have this problem.  I think it's a matter of Apple and the wish that they would be admitting the problem and try to find a solution.  Apple of love, but right now quite disappointed.  Quite expensive computer for issues that I am.  I went from a Dell for an Apple thinking it was the best thing since shirt pockets, hmmm...  I don't think it's any problem with our modem, wireless, router, etc., because we have other laptops, iPads, iPhones in this House and have NO problem.  So, I hope that everyone is not running out to buy new routers and modems because no doubt this is the problem at all.  PLEASE APPLE, DO SOMETHING TO FIX THIS!

    Hold down the Option key while you click on the wireless icon in the menu bar. You get a screen similar to the following:

    what you get for channel and mode PHY?

    What CISOS or the signal strength?

    What emission rates?

    very important and how many other networks do you see?

  • Hi my game Center leaves me not to accept friend requests, load any games im unable to load data because of connectivity issues and the King Games I have when you want to send queries, you need to connect whenever fbk his shit

    Hi my game Center won't let me load any games or accept friend requests and when I try to accept queries etc. of friends on my King of games it's connect to facebook every time his shit. phone says on the game center connectivity issues I am not worked before

    Hi, kitecatgirl.

    Please visit Apple support communities.

    I understand that you experience connectivity problems when you access Game Center accepting friend requests.  Here are some troubleshooting steps that I recommend to go through this problem.

    Get help

    If you are unable to connect to Game Center or stay connected, follow these steps:

    1. Make sure that you are connected to the Internet.
    2. If you cannot create an account or sign in to Game Center of in a game, try to create an account or sign in with the Game Center app.
    3. Sign out of Game Center, then reconnect. If you can not you connect to Game Center with an Apple ID, reset your password, or use another email address. To manage your Apple ID, see my Apple ID.
    4. If you use a connection Wi - Fi, be sure that your Wi-Fi router is configured for Game Center.
    5. If you can't connect to a Mac, continue with the steps to solve the sign in questions.

    If you have a problem with a game of Game Center, follow these steps:

    1. Make sure you have the latest version of the game. To check for updates, go to App Store > updates.
    2. Test your connection by using a different game. If you cannot connect with a specific friend or player in multiple games, they might need to check their Wi - Fi connection and router settings.
    3. On iOS, try opening the game to the home screen, rather than the inside Game Center.
    4. If you cannot resolve the problem, follow the steps described in the next section to report the problem to the developer.

    Game Center on your Mac or iOS device using

    See you soon

  • My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

    My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

    Not knowing what the 'followed the steps posted' have been

    The iOS device connects to other networks? If Yes, which tends to indicate a problem with your network.

    The iOS device sees the network?

    Error messages?

    Other devices connect now?

    The iOS device has connected before?

    Try the following to rule out a software problem:

    -Reset the device iOS. Nothing will be lost

    Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

    ten seconds, until the Apple logo appears.

    -Power off, then back on your router

    . - Reset network settings: settings > general > reset > reset network settings

    - iOS: troubleshooting connections and Wi - Fi networks

    If your iPhone, iPad or iPod touch connects to a Wi - Fi network

    - iOS: recommended for WiFi routers and access points

    -Restore from backup. See:

    iOS: how to save

    -Restore factory settings/new iOS device.

    If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

    Shop Apple Store - Genius Bar

  • Want a Smart Touch 23-065: I've upgraded to Windows 10 and now my bluetooth devices do not work

    I have a Smart Touch 23-065 envy that I have upgraded to Windows 10 and now my bluetooth devices do not work. They are detected, but not pair

    OK, line background peripheral bluetooth is not supported until the vendor provides a Windows 10 driver which is not yet and my never be available. Suppose if I want to use bluetooth, I'll have to get a usb adapter

  • HP Pavilion 300-1100: Conversion to 10 Windows with a loss of Smart Touch functionality

    I recently converted to 10 Windows on my desktop touch computer Smart.  Now I can't find the icon and when I found a generic clicking on it it says that the following path is unavialble and I should try to fix the path and try again.

    Program files (x 86) HewlettPackard\TouchSmart\SmartCenter 2.0\SmartCenter.exe.     I can't find a file named SmartCenter.exe in the HP file on my C drive.    The button on the monitor for Smart Touch does not.  What should I try next?  Are there drivers I should have downloaded?  Something else?

    I found a program called taker of photo Webcam which has turned on the camera.  Although the photos are dark, I managed to lighten them in another program Windows 10 Photos

  • iPod touch will not connect to wifi, I have tried everything!

    I used this touch iPod for over a year, and all of a sudden, it does not connect to wifi. I type the correct password, but he responds with "wrong password". I checked since then with several computers apple and iPod touch on the connection and that's fine. I even had these devices 'forget' the network and reconnect without any problem. I also had new devices to connect to the same wifi signal. I know that's not the router. I reset the network settings, reset the content and settings. I tried to restore then connected to iTunes and told to disable Find My first iPhone, but should not be my apple ID password. When you are connected to iTunes I put the iPod into recovery mode (connector pointing to iTunes screen show) and reset to factory settings and it won't always connect to the wifi. I'm looking for ways to solve this problem all over the internet and I'm out of ideas. The iPod is updated to the current 9.1 iOS. Someone at - it else I can try?

    It connects to other networks?

  • top of Tower HP touch smart: don't remember password on the laptop of hp smart touch can ' low load suggests no disc reset

    forgotten password on the laptop of hp smart touch don't down load suggests no disc reset

    Hello:

    Identify the name of the phone model, product number:
    http://support.HP.com/us-en/document/c00033108

    Is - this Windows login password or password BIOS Admin or power on or boot password?

    Concerning

    Visruth

  • Pavilion g6: Atheros connection issues with Arris Modem

    Hi, I had the same problem with my laptop and Atheros network card, windows 7, it can not connect to the network with Arris modem but it works with other modems. I downdoaded the driver from the link you provided here, and it worked, my laptop connected to the network without problems, but after a month it stopped connecting to the network, I downloaded the driver again, but it did not work.

    @s_z,

    Hello and thanks for posting back.  Here is a link to a solution to problems of common connection to the problems of Atheros WLAN Driver and connection.

    Atheros WLAN Driver corrects connection issues with many new routers (Linksys, Netgear, D-Link, etc...)

    Please let me know how things are going.  Thanks again for posting and have a great day.

  • HP iq504 smart touch

    I tried to use my smart touch months ago and it did not work properly so I did system restore, but during the restoration, the power went out. Now when I restart the smart touch, it loads windows and then goes straight to a blue screen. There is only a cursor in the middle. I ran some diagnostic tests and everything has extracted o.k. tried to start in safe mode and it says: in each corner of the screen, but no safe mode toolbar or Windows is available. Just a black screen blank with the mode without failure of words. I tried to restart the computer for the last known successful startup and it's the same as before, the charges with a blue screen. Can someone help me? Thank you.

    Hello @otown59,

    Thank you for the updated information. I'm you provide a document from HP support: get a USB HP recovery disc or HP recovery disks, allowing you to get your recovery media if you do not have everything as I doubt F11 will work for you at this stage. If this does not work all the better, but if follows does not only document and it will guide you on how to get your recovery disc.

    I am also a you provide a HP support document: performing a recovery of the system (Windows Vista) HP, which has all the steps that you need to recover your computer.

    I hope this helps. Thanks for posting on the HP Forums. Have a great day!

  • Connectivity issues while trying to connect in spades to MSN on the computer

    * Original title: msn Spades - he works?

    I can't log on to msn Spades; something about connectivity issues; can someone help here?

    Hi Steve-Bob,

    Thanks for posting your question in the Microsoft Community Forums. I'm sorry to hear that you are facing connectivity problems while trying to connect in spades to MSN on the computer.

    I imagine the inconvenience that you are experiencing. I will definitely help you with this.

    I would like more information about the issue.

    1. What is the exact error message?

    2. what browser you're using connection?

    3 have there been recent changes made on the computer before the show?

     

     

    If you are using internet explorer, please follow these methods and check if it helps.

    Method 1: Verify the problem by running Internet Explorer mode without modules.

    Temporarily disable all add-ons to see if the modules are the origin of the problem.

    To temporarily disable all add-ons:

    a. click the Start button.

    b. click on all programs, accessories, and click on system tools.

    c. click on Internet Explorer (No Add-ons).

    If the Internet Explorer (No Add-ons) mode works very well then an add-on may be causing the problem. You will need to re-enable each (process of elimination) in order to determine which one is causing the problem.

    http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

     

     

    Method 2: Optimize Internet Explorer and check.

     

    How to optimize Internet Explorer

    http://support.Microsoft.com/kb/936213/no

     

    Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

     

    For more information, visit the following link.

    Sign in using

    http://zone.MSN.com/en/support/article/supporthubsignin

     

     

    If the problem persists, feel free to let us know. It is our pleasure to be of service.

Maybe you are looking for

  • USB enclosure for HDD GB 900

    Nice day I have a HP 900 GB HDD and am looking for an enclosure for the USB adapter. model # EG0900FBLSK part # 619286-004 I'll try to find a USB enclosure for the HARD drive and the 'standard' ones sold in big box stores do not work. It seems that t

  • Java VM in Webtop

    Is it possible to install a Java virtual machine for use in Webtop? Our company is developing a proprietary application that works entirely in Java. I'd like to be able to run it on Webtop if possible. If this does not work, I'll try ThinVNC, but so

  • HP 5660: update Windows Defender definition - KB2267602 (definition of 1.213.7334.0) - error 0 x 80070643

    When you run Windows Update on my Windows 10 machine, I am constantly invited by, "Update for Windows Defender - KB2267602 (definition of 1.213.7334.0) - definition error 0 x 80070643. When I try to install the update, I get the same error message as

  • Customer discovers vi Web page without needing to run time engine

    I am trying to create an environmental Web page attached to a Labview vi, where the end user can browse the web page from their internet home computer.  Problem is that I read that the end user needs to have the runtime installed on their computers,

  • Update a reference

    I have a Heisenbug (a bug that disappears when you look at it closely). I use the user to input text control. Elsewhere in the program that I use a reference to the control to get the value. When I use it in a loop, I can't get the Value property to