Different fonts? is possible to use...

Similar Questions

• text boxes created in the end loop for using DIFFERENT fonts!

  I have a loop that creates videos with text boxes inside of them, all inside an accordion component. Basically, the code performs the Accordion with content navigation.
  
  Anyway, the strange thing is that text fields that use TWO different fonts! How is that possible? Even if my TextFormat fails for any reason, must not then fail because ALL created text fields and not only some (and why it fails)?

  Well, I just found that it works when I use instead of setTextFormat setNewTextFormat.

  Otherwise, it works also when I place the setTextFormat * after * setting text.

  I should have read the documentation before asking here :-)

• Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Hi Morten,

  Yes, you can have your subscription or your license installed on two different computers with the same adobe id, however use one at a time.

  Please let us know if you have any questions, more about it.

• Is it possible to use the fonts in my company the design to the use of cloud applications?

  I recently subscribed to in the cloud and quickly learned that my company fonts are not available.  Is it possible to use my business fonts when designing in the cloud applications, rather than using their fonts?

  What Adobe applications are you talking about?

  As for example, if you have downloaded Adobe InDesign Creative cloud, there is absolutely no difference in the way it uses the fonts of a copy of Adobe InDesign that you have installed from a DVD. Both applications are run from your hard drive.

  Your business fonts must be installed on your computer for use in any application of the computer.

• Different font on label multiline table size

  I feel that the answer is going to be it is not possible, but is it possible to have the text of different sizes in the same row/column label?  I want to do is to have up to three lines of text, where the first line is larger than the other two... Maybe some sequence in the string of exhaust... something like:

  SetTableRowAttribute (handle, control, 1, ATTR_LABEL_TEXT, "<\big>Line1\n<\little><\little>Line3 Line2\n");

  Hi gtoph,

  Unfortunately, there is no way to have the different fonts in a single table cell.

  Suggestion of JR is a good thing. I'll add my own, in case that you have to scroll the table, but you don't need to edit the text:

  You can create and configure a control out of the screen that has the look you want (see attachment), then empty control in an image using GetCtrlDisplayBitmap, set the type of cell in your table to VAL_CELL_PICTURE and then put your bitmap image in the cell.

  But of course, this will not work unless you want to only display the text and not modify it.

  Luis

• Displays a text ("sample application") Logo and Description ("this is a sample application") with different font size

  Hello

  
  

  I use the universal theme of apex 5.0 and tries to display logo text ("sample application") and description ("This is a sample application") with different font size.

  
  

  Type of logo - text

  Logo - sample application - this is a sample application.

  I want to display the description in the smallest font size, so I changed the Logo below

  Logo - < span style = "" are-size: 3.8 rem; ' > Sample App </span > - < span style = "" Dimensions are: 1.8 rem; "> this is a sample application </span >" "

  But I have following problem.

  1 - the font size for both is the same (why the size is not different?, because I gave the size of different font within the span tag)

  2 - the text of the whole logo whose description is displayed twice.

  -Once in place of the actual logo and

  -the second on the left upper tree navigation. (just below the text of the actual logo)

  I tried to use the logo attribute, but what makes the whole logo & its description with the same size. I need size of different font for both, so it is unusable.

  Attribute logo - style = "" are-size: 3.8 rem; ""

  Really appreaciate help.

  Thank you

  Deepak

  DeepakJ wrote:

  I use the universal theme of apex 5.0 and tries to display the text of the logo ("sample application") and description ("this is a sample application") with different font size.

  
  

  Type of logo - text

  Logo - sample application - this is a sample application.

  I want to display the description in the smallest font size, so I changed the Logo below

  Logo - application example - This is an example of application.

  But I have following problem.

  1 - the font size for both is the same (why the size is not different?, because I gave the size of different font within the span tag)

  Cannot reproduce. Using the code above results in different format text as expected. (He looks terrible IMO)

  2 - the text of the whole logo whose description is displayed twice.

  -Once in place of the actual logo and

  -the second on the left upper tree navigation. (just below the text of the actual logo)

  Including HTML tags in text in the 5.0/theme 42 APEX logos results in this behavior. I consider this as a bug as (a) it says nowhere that it is not possible to do so; (b) the text of the logo is not HTML - or attribute-escaped when used in the page.

  See How to avoid to show the logo on the navigation bar to get an explanation of the underlying cause and a workaround to allow the common use cases include the text and a picture in the logo. This particular solution is of no use here. The solution to this problem requires a custom with the theme the theme roller style sheet, which is the preferred way and support to customize and extend the universal theme.

  • Click the Thème Roller on the developer toolbar.
  • Expand the CSS custom section.
  • Add this style custom rule:

  .t-Header-logo a span {
    font-size: 3.8rem;
  }
  .t-Header-logo a span:after {
    font-size: 1.8rem;
    content: " - This is a sample application.";
  }
  

  • The page will automatically preview changes.
  • Click on record under and type a name for the style of custom theme.
  • Topic close Roller
  • I hope that decide that it is not a good idea and cancel the mods.

• How to set different fonts for numbers in the titles and tables of contents

  Hello

  I noticed some people to use a different font for the numbers in the titles and tables of contents to get an extra magic. Is it possible to automate the use of fonts in paragraph styles?

  Oh and suggestions on which fonts would be a good thing for numbers?

  Thank you!

  Furthermore, you must doany of this fancy stuff if you use an OpenType font that made OSF glyphs (and if you are not you will need to set the font as part of your style). Just head on to the style definition and enable OSF there OpenType features section.

• Is it possible to use versions of file on a time capsule airport

  Hello

  I know that it is possible to use versions of file on the SSD and iCloud drive for example for numbers by going back to the old versions.

  When I use a NAS functionality is not usable with a Synology for example.

  Is it possible to use the versions of the files with the files saved on a Time Capsule?

  BR

  Excellent question.

  I just tried it... to see what is happening.

  I was able to come back as long as the document is open... but I got the warning below as soon as I close the document.

  

  Of course that stores the file directly to the CT... I have not test what will happen if you save the file to the virtual disk... that might work... and could run even on the synology. A virtual disk is very different to directly save your files.

  See Q3 here on establishing a dmg which you can also do it on the synology.

  http://pondini.org/TM/Time_Capsule.html

• I tried for AN HOUR to find a way to put the two different fonts on the same line

  Pages is crap. I tried for AN HOUR to find a way to put the two fonts on the same line, even if I highlight 1 WORD, the whole line changes (if you know how to do that please tell me, I'll me CRAZY!). Wouldn't recommend, that Word is 100 x better and easier to use

  < published by host >

  Hi varn,.

  Seems to work here (Pages of screen capture):

  

  Select (highlight) the text you want to change. Click on the Format brush, and then click Style. Choose the font you want to use.

  The example above is in the text layer. I also tried in a text box and a table cell.

  I also tried to change the font for a single word of a line of text in Pages for iOS. The police has changed to the selected word, while the rest of the line remained in the police, he had previously.

  Cannot test it in 5 Pages, because I have not installed. The above example is Pages ' 09.

  It is possible that you have applied to a paragraph Style, what would change everything in the paragraph containing the insertion point.

  Kind regards

  Barry

  PS: MS Word is available for OS X, if you feel the need to switch.

  B

• Is it possible to use ddr2-533 memory in Satellite M40-101?

  now in my notebook is installed 512 MB ddr pc2700. I want 1 Gb. is possible to use this laptop ddr2-533?

  Hello

  Please use the memory module with the same bus speed. It is possible that two modules with different one of them will be defective after awhile. I also recommend you to use Toshiba tested for this camera modules.

  Just FYI: your device can handle with 2 GB of RAM and compatible modules are
  PC2700 256 MB (PA3311U - 2M 25)
  PC2700 512 MB (PA3312U - 2M 51)
  1024MO PC2700 (PA3313U-2M1G)

  Good bye

• Satellite L50 - A - 1 7 - is possible to use the windows key

  Hello

  IM upgrading to a L50 - a - 1 c 7 for a desktop game pc. im going to use the hard drive of my laptop and I'm not going to use my laptop again.

  so my question is: is it possible to use the key windows of my laptop and re - use for my office?
  When I have more money later I'll buy a HDD a windows for my laptop key

  Thanks in advance

  In General, the Windows key is the version of the OS installed on your laptop. I don't understand how you want to use the HARD drive on your desktop with a different hardware configuration. Original image installed on your HARD drive recovery is designed for your laptop and a suitable job o with certain hardware platform.

• Possible to use the main clock FPGA as a basic Source of time for the NI 9234?

  Hello

  I am running a NI 9234, and NI 9222 module on a cRIO-9114 chassis with a real-time 9022 controller, data acquisition on the 8 channels on the full sample rate, using the FPGA.

  My problem is the synchronization of the data, where the NI9234 is usually a late acquisition, compared to the NI9222. I tried manually delay the NI9222 to take the first samples, but so far without success.

  To solve this problem and also to ensure a rate of data more comparable on both cards, I was wondering is it possible to create a Source of time Base master for the NI9234 WITH THE FPGA (opposite to import from another NI9234 or similar module)? The NI9222 I already provide with sampling of the impulses from the FPGA (as expected with this module).

  Another issue would be the characteristics of the exact chronology of the two modules, including in terms of synchronization between the beginning of the acquisition and the first samples of data. I couldn't find any information about it...

  Thank you in advance,

  O Hoppe

  Hello!

  I've never heard of a possibility to use a time base FPGA with a module of Delta-Sigma.

  But I think that the question should be what has not worked to delay the signal and how you did it. Have you read this article?

  How can I compensate for delays of different group with the C Series Modules in LabVIEW FPGA?
  http://digital.NI.com/public.nsf/allkb/74EB238E1BCADD528625735300681A7D

  Can you give a more detailed description of your trial to delay acquisitions? Can you provide a code example?

  Best regards

  Christoph

• Is it possible to use Canadian spare battery in German for laptop - Y570?

  Hello community,

  I'm a trainee program at a University in canada. Naturally, I'm German.

  In Germany, I bought a Lenovo Ideapad Y570. I would buy a second battery for this camera.

  Is it possible to use a Canadian spare battery with this unit?

  -Because I don't want to buy in Germany and ship it to canada, I think that this is not common sense...

  Thanks for your replies.

  I don't think that lenovo made a laptop for the Germany and designed a notebook different to the Canada. I think you'd be very well just order a battery of the Canada.

• Is it possible to use the internal clock for meter tasks in the buffer?

  Hello

  Hardware: USB term mass 6251

  Software: LabView 2011 SP1

  I need to measure the angular lever position and speed of a carpet. For that I use two quadrature encoders. To accurately calculate the speed I use buffered from the measures of position using one of the available onboard counters. I understand that for this technique, I provide a sample for the meter clock. I wonder if it is possible to use the internal time base. Note that both of my counters are used so I can't generate a signal to clock with them.

  I found two conflicting pages related to my problem:

  1) http://digital.ni.com/public.nsf/allkb/EA7FFFEAFC3E1D85862572F700699530

  2) http://digital.ni.com/public.nsf/allkb/775290A3121D1FFC862577140074D3B3

  The first says that I can use the internal clock of 100 kHz, and the other says that I have an external clock.

  Comments/solutions?

  Javad

  Hi Javad,

  On your specific device, there is not a direct route from the time base of 100 kHz for the meter (according to the routing table of MAX):

  

  Yellow cell indicates that a route is possible but there is not direct (the "gate" terminal is used as sample clock for counters of the M series).  Mouse on the cell reveals yellow that make this route really requires the use of a counter (so it is not suitable for your application).

  On the line above "100kHzTimebase" you will notice it is called 'FrequencyOutput', which does not have a direct route to the door.  This would be the way to go if you want to route 100 kHz (or some other frequency) as your sample counter clock - you can set it up the same way to a standard meter output task:

  

  The output frequency doesn't have that many features like a meter output, but it is able to generate a continuous stable frequency.  There are only 32 different frequencies that can be generated using Freq Out on the 6251:

  {10 MHz, 100 kHz} / {01:16}

  Do not forget that the resolution of your measure of frequency by using this method will be equal to how many times you update the measure (hopefully, that makes sense).  In other words, if at the end of all the 1 second, you take the total number of charges since the last second, you would have a 1 per second equal resolution change in the number.  If you take the difference twice per second, you would end up with half the resolution.  You will be sampling the account register fairly quickly, but you will need only to do the calculation of the frequency after that all N samples in order to obtain a significant number.

  Another method that will certainly give a higher resolution in less time at typical speeds of coders is to set up a measurement of the frequency (the counter will count the internal 80 MHz base time period your external signal and the pilot calculates the frequency based on the result).  This method uses only a single entry - so you can just feed the 'A' your encoder quadrature signal (the method will not work if you are interested in absolute position or direction).  Without using signals A and B together, you will be susceptible to noise (which is common to have a quadrature encoder) that you want to delete (perhaps by setting up a digital filter).  Finally, you want to set a reasonable timeout on your reader calls (which will be blocked until a period of your external signal occurs), and the error-200284 handle simply report "0Hz" to make sure that your program is still sensitive even without an external signal present.

  Best regards

• How to apply different fonts to text (words) in the same field

  Please help, how to apply different fonts to text (words) in the same field. I want to select text and apply the font, size and color on the selected text in the field, this code below, the setFont method changes all the text in a field (message) of a select statement to the police. Help, please

          message = new AutoTextEditField("","",maxNumChars,editableStyle)
          {
              protected void layout(int width, int height)
              {
                  super.layout(width, height);
                  this.setExtent(550, 250);
              }
          };
          message.setBorder(border);
          message.setMargin(xyEdgeForMargin);
          message.setPadding(xyEdgeForPadding);
          message.setFont(_menuFont);
  

  Just write your edit as field

  SerializableAttribute public class RichEditField extends BasicEditFields

  {

  int [] offsets = null;

  Are police [] = null;

  String text = null;

  RichEditField (label As String, String text, int [] offsets, make police [])

  {

  Super (label, text);

  This.Text = Text;

  This.Label = Label;

  Offsets = this.offsets;

  This.font = do;

  Add validation for offsets and text here

  }

  RichEditField (label As String, String text)

  {

  Super (label, text);

  This.Text = Text;

  This.Label = Label;

  This.offsets = {0};

  This.font = {g.getDefaultFont ()};

  Add validation for offsets and text here

  }

  / * Here is a method to add customization of fonts as

  setFont (offset, length);

  setFont (offset);

  public void paint (Graphics g)

  {

  g, Clear ();

  for (int i = 0; i)<>

  {

  calculate it according to x, y using offset

  int length = 0;

  g.setFont (do [i]);

  If (i<>

  length = offset [i + 1] - offset [i];

  on the other

  Length = Text.length () - offset [i];

  g.drawText (text.substring (0, length), x, y);

  Super.Paint (g);

  }

  }

  This method is not compiled may have errors and may have many features according to your needs.