Different Menu buttons for the different media queries?

Similar Questions

• change the order of the boxes in the different media queries

  How can I change the order of the boxes in the different media queries?

  Is the only work round copy box to the other control and pass the Display attribute in different media queries?

  Hi, thanks for your question. Reflow follows the rules of CSS and HTML. There is not a way to share or move objects in the DOM without using something like Javascript. We have avoided that and focuses only on CSS and HTML with reflow.

  Yes, you can use several boxes in different places and change their display as required. But I could to warn against this as it can add work for you and anyone else who can take this design and put into production. I could take a look at why you want to move the boxes autour and maybe find a simpler or more effective design model to follow to get a result, you would be happy with that. Hope that doesn't sound preachy, you should try it if you want and don't listen to me. Be that as it may, I would like to know how it goes!

• The product key for the Windows Media Center 8 does not work!

  I tried 3 or 4 times to use the product key for the Windows Media Center 8, that you sent. But it keeps saying "this key will not work. Check it or use a different key. "I tried too communicate with someone who could help me and now I am very displeased with Windows. I tried several times.

  You are running Windows 8 or Windows 8 Pro? Media Center requires that you run Windows 8 Pro and your installation must be enabled.

  http://techingiteasy.WordPress.com/2012/11/29/how-to-get-your-free-Windows-Media-Center-key-for-Windows-8-Pro/

  Add the feature does not

  To work around this problem, disable the Nalpeiron Licensing Service until you try to install the feature. To do this, follow these steps:1.Swipe from the right edge of the screen, and then click search. Or, if you use a mouse, point to the corner bottom right of the screen, then click on search.

  2. type services.msc, and then press or click on Services in the results of research.

  3. press on or double-click Nalpeiron Licensing Service or NLS.

  4 tap or startup type-click and select disabled.

  5. press or click OK.

  6. restart the computer.

  7 install the feature and then restart the computer.

  8. Repeat step 1 to step 3, and then change the startup type for the licensing of Nalpeiron or NLS on automatic Service.

  9. click OK and restart the computer.

  The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

• How to get rid of the new menu button on the right side of the toolbar

  Honestly, I don't know why the developers cannot offer new features that we can use or not, by choice. Instead, things are forced upon us.

  Could someone tell me please how to get rid of the new menu button on the right side of the toolbar?

  It doesn't seem to be an option to remove via the Customize Toolbars window.

  Thank you very much.

  CTR extension makes Firefox customizable menu button 3 bar, so you can drag this button in the palette to customize to remove it from the Navigation toolbar.

  Reload and stop probably combine only if you set the two buttons in the correct order (reload - Stop and non-Stop - Reload)

• radio buttons for the front end

  OK, so Im new to LabView and tried to create a user interface for several calibration process.  I tried to use radio buttons for the system is selected (only two options) and depending on whether you chose the resulting calibration procedures that would be system can be chosen when other options are grayed out and disabled.  I got the program so that the first selection process would work, but if you click on the case by default, it automatically goes to the default selection. Any help would be appreciated

  I think what you really want is to set the properties in the event of security system. See attachment.

  

  Note also that this is a loss for the duplicate items (for example property nodes and diagram constants) in all cases of a box structure. Everything is in any case belongs outside the structure of the case. One necessary instance.

• Can we apply a createInsert single button for the two master form, details of Table?

  Mr President.

  Can we apply a createInsert single button for the two master form, details of Table?

  I want to just click a button and fields are available in form-Master and details-table.

  As below

  

  Concerning

  Mr President.

  My worm jdev is 12 c

  And I can do your job for you.

  His code

  For any organization that wants to do this job

   public void createVoucherAndVDetailsRow(){
              VoucherViewImpl voucherVO=this.getVoucherView1();
              VoucherViewRowImpl row=(VoucherViewRowImpl)voucherVO.createRow();
              voucherVO.insertRow(row);
              RowIterator iterator= row.getVoucherdetView();
              String voucherNumber=row.getVoucherId();
              NameValuePairs nvps=new NameValuePairs();
              nvps.setAttribute("VoucherId", voucherNumber);
              VoucherdetViewRowImpl voucherdetRow=(VoucherdetViewRowImpl)iterator.createAndInitRow(nvps);
              iterator.insertRow(voucherdetRow);
              }
  

  Concerning

• It "seems" is not an API for the art media at the CC of Adobe Photoshop for the touchscreen.

  PC: Microsoft SurfaceBook, Win-10, 64-bit, 16 GB of RAM

  All-in-one touchscreen Lenovo A740, Win-10, 64-bit, 16 GB of RAM

  Application two computers; Adobe Photoshop & CorelPAINT CC X 6

  SurfaceBook-in CC Adobe Photoshop works well with the pen & touch.

  Lenovo A740 - in CC Adobe Photoshop is inadmissible to capacitive pen (mouse works fine).

  Still... CorelPAINT X 6 works well with the mouse, touch and capacitive stylus.

  QUESTION - why the CC of Adobe Photoshop features lack INK API required for brush motor to work with capacitive touch screen on my Lenovo A740?

  It "seems" is not an API for the art media at the CC of Adobe Photoshop for the touchscreen.

  If... I'm wrong, please point me in the right direction.

  Move on to the Discussion of Photoshop

• I just bought a new Mac and fancy external drive. Because I'm not a geek, I'm not interested in the many fabulous creative cloud features. I don't see a button for the purchase of LR6 by himself on Adobe. Does this mean I should buy elsewhere (B & H)

  I just bought a new Mac and fancy external drive. Because I'm not a geek, I'm not interested in the many fabulous creative cloud features. I don't see a button for the purchase of LR6 by himself on Adobe. Does this mean I should buy elsewhere (B & H) LR6? If I buy Adobe's LR6, is there a price for LR6 special bundle with the last ch?

  Hi Sharon. The bundle special price for Lr and Ps is via the Cloud creative photography Plan. There is no special rate for the non - CC Lightroom version. You can buy the no - CC here version: products

• Show button for the rest of the film

  With the help many people on this forum, I've set up a nice little tabbed area navigation next to my film. Tabs (a graphic image) is intended to allow the user to access a given at any time section.
  
  I've implemented a transparent button on each tab to create the jump to a particular slide, but there is no option to 'fix' these controls button for the rest of the film. Can I put an image to display for the rest of the movie (as I did for the chart of the tab), and other items, but I can't set the clickable button to display. This means that, unless there is another way to do it, I'll have to copy and paste transparent buttons from a slide to any other slide - one at a time.
  
  There is another control that I can use to achieve what I want? Or is it possible that I can put the transparent button to display for the rest of the film?
  
  Thank you
  
  Rhonda

  Hi Rhonda,
  If I understand you correctly, you are eager to have invisible buttons on each tab/slide and are looking for an easier way to do this?

  With CP, if you copy something on a slide and then simply paste inot another slide will be in the same position as on the origianl slide... , you can also copy across multiple slides at once, just select all the invisible buttons, copy them, and then select all other slides (not your first original slide that you copied the buttons of) then paste and all buttons must be on all tabs in the right position on all slides.

  HTH
  see you soon
  Sabine

• Buttons for the S60 menu light does not work

  Hi all

  On Lenovo S60 menu button illumination does not work. Is this normal and supposed to be like this, or it's some sort of bug?

  Thank you!

  S60 is not backlit on the recent button, home and back.

  Thank you.

• help with the menu button and the film load

  Hi all... I am very new to flash and actionscripting and I am self-taught using mainly Internet searches.
  I'm building a site with a menu and a banner that is controlled by the menu (two swf files). I got to the make contact however, I'm stuck at this point.
  When 'bt_1' is hit I would like to be respected a "mv_1" to load in the banner.swf with intro animation... this I figured out how to... but now when you click on "bt_2" I want to play the rest of the animation of "mv_1" to unload the film before loading "mv_2" with its animation enterance respected... that I would make to several buttons. The method that I use for my local connection is...
  
  Sending script
  mySender = new LocalConnection();
  on (release) {}
  ------each button corresponds to a different setting... 1,2,3,4,5,6
  _root.mySender.send ("menuconnect", "action", 1);
  ------This is the best way that I could understand to disable the buttons appropriate... There might be a better way?
  Home.Enabled = false;
  couple.enabled = true;
  Events.enabled = true;
  Bridal.enabled = true;
  Media.enabled|disabled = true;
  RSVP.enabled = true;
  }
  
  
  
  Script of reception
  
  myReceiver = new LocalConnection();
  myReceiver.action = {function (doThis)}
  If (this == 1)
  gotoAndPlay (2);
  If (this == 2)
  gotoAndPlay (3);
  };
  and so and soforth for all six buttons
  myReceiver.connect ("menuconnect");
  
  If all this makes no sense at all, I'm sorry... I tried my best...
  If some pro out there can understand what I'm trying to do and can help me I would greatly appreciate it... Thank you all
  
  SJS

  I would like to use the ID to link to each of your mv_1, mv_2 etc. in the main stage and control them. This would have the advantage of eliminating the duplication of code and keeping most of your code in one place (image 1 of your _root timeline).

  If mc_1 etc was connection id mc_1ID etc, the other began on a frame labeled "outro" and ended on the last image, you can use:

• Error of update for the Windows Media Center guide

  I have Windows 7 64 bit.  I have been using WMC for local TV listings since I got my new PC in April (more than 9 months) without any problem.  WMC guide is always up to date... no problem.  However, the guide will not is no longer up-to-date.  During an update, everything works fine until it gets to the final stage of the treatment registration guide.  An extract from a newspaper of the observer of the typical events is listed below.

  I tried to redo my setup TV, but has the same problem.  I even tried a zip code different, but still had the same problem.  Using the event log, I discovered that this happened on 10/17/10.  Update been managed in the morning but closed later tonight here.

  19:12:07 - EpgListings extraction.

  19:12:07 - EpgListings of treatment.

  19:12:07 - EpgListing - 7.enc recovery.

  19:12:11 - 189828250_ListingData.mxf extraction.

  19:12:11 - 189828250_ListingData.mxf of treatment.

  19:12:16 - errors during the last update.

  19:12:16 - retries at 10/11/2010 17:30:48.

  Problem solved!

  Found this link which cleans the history for the installation of the TV.

  http://www.hack7mc.com/2009/09/clearing-Guide-data-and-tuner-Setup-from-Windows-7-Media-Center.html

  Deleted the files suggested and went through Setup from scratch and guide downloaded without problem!

  Hope this helps some other poor single frustrated with the same problem.

  Thanks for all the suggestions S.Sengupta.

  B

• Help with buttons for the slideshow

  I'm working on my first flash project.  I created a simple slideshow image 4.  I have created 4 buttons that when clicked, jump to this image in the panel mounting.  I added rollover States for the button. Everything works as I want it.

  My question is how can I get the buttons to have a different look when this particular image is active?

  For example.  When the slideshow is on the 2nd picture, I want 2 button to have an active state (different look as the other three buttons).

  Here's my project file.

  Thank you

  You must use the movieclip buttons.

• Toshiba 32W1333DN: name of moving/deleting/edit buttons for the missing channels

  Hello

  I just bought 32W1333DN in Sweden.
  But I can't change the position of the channels in the channel list.

  Both the Quick start guide that comes in the box with the TV and the online manual has pictures and details on how to move/remove the channels and change the names of channel in the channel list.

  I'm supposed to go in
  Menu->-> Edit Channel List channel list.

  Once there, I select channels and perform tasks by selecting the buttons.

  But these buttons aren't where I watch my TV.
  Instead of the buttons for * OK * / * Move * / * remove * / * change name * / * lock * I've * OK * / * lock *.

  What is going on?

  In settings, version of the program is * V.2.1.4A * and upgrade software * V.2.1.9x *.

  Hello

  Please take a look in the user manual
  [Manual Toshiba 32W1333 | http://www.toshiba-om.net/LCD/PDF/English/W1333-32-English.pdf]

  Page 17 provides information on the list of chains, sorting programs and program locking.

  For example, to move the only channel in the list, you must do the following:
  Channel order can be changed according to your personal preferences.

  SELECT the main key channels list menu, then press OK.
  Select modify the channel list to manage all channels. Use upward or downwards and the OK button to select Edit list of strings.
  The Move option in the channel button list and press OK.
  Change number of screen will be displayed. Enter the desired channel number using the number keys on the remote control. If there is a channel previously stored on that number, a warning screen will be displayed. Select Yes if you want to move the channel and press OK.
  Selected channel is now moved.

• Hide Menu button once the page open definition

  

  Basically what I want to do in QML is set the property 'visible' for a menu at the top to 'false' button, once it has been clicked and the new page open. For example. in the picture above, once I clicked on the 'Settings' button and open the settings screen, if I slide down on this screen, the 'settings' button should not be displayed because I'm already on this page.

  Thank you.

  Thanks a lot for sharing your knowledge, very popular and beneficial for the community too. I don't have a chance to respond here earlier. After a lot of reading round, I found worked property below.

  However, I did read your messages and take the direction of them. As happens regularly, there is usually more than one solution. I hope this helps someone else too.

  paneProperties: NavigationPaneProperties {
          backButton: ActionItem {
              title: "Back"
  
              onTriggered: {
                  menu_help_top.enabled = true;  //enable the menu button again
                  Qt.nav_pane.pop();
              }
          }
      } // end of NavigationPaneProperties