Ability to save remote controls online

Similar Questions

• Windows 8 on HP TouchSmart IQ826t (including REMOTE CONTROL) successfully installed

  Here's the background.  I have a TouchSmart IQ826t running Windows 7.  I have installed on it, (same partition), Windows 8 RTM using a DVD.  The installation went without a hitch and Windows 8 is installed.  I've had two disappointments: 1) the possibilities of contact not only that it was very difficult to slide on the screen side and the only way to scroll from left to right was to use the scrollbar at the bottom of the screen.  (2) turner of the TV does not work, but I am hopeful that it will be the 26 Oct when Microsoft releases the Media Pack.

  Thus, the question that I continued to work on was the touch feature.  I came across an update from HP that I missed for Windows 7 called "NextWindow 1950 Touch Screen Driver Update", which was to improve the answer touch near the edges of the screen and resolved a problem of sensibility in the upper right of the screen.  I downloaded it, (sp49787.exe) and tried to install it.  He would not have installed.  However, the part "NextWindow 1950" of the title was a clue.  I have been looking on the NextWindow site last week and I remember seeing a driver Windows 8 touch screen on their Web site: http://www.nextwindow.com/nextwindow_support/Windows_8_Touch_Screen_Driver.html

  I took a chance and downloaded.  Before you try to install it, I created a new system in case restore point where and then installed.  The installation has maybe 4-5 minutes, but he reported that he managed.  Without having to reboot, I checked the tactile ability and WOW, it works now as my 7.5 Windows phone with lots of scrolling left and right as well as perfect sliding on the side of the screen!  Just to be safe, I restarted and everything works great!  Thus, it seems that the driver on the link above is the solution at least for my model.

  Chuck

  I found how to get the HP Remote to work with my IQ826t! I was reading something and it reminded me that I had never gone through the list of Services on this computer. I found a service that has been extinguished called, 'Human Interface Device Access. I changed the properties of it from manual to automatic. Rebooted and WOW, the remote will now control the Volume, Mute and other functions, he was ignorant. NOTE: Before I tried this service I also found a service called "HP Software Framework. It was also well manually. I changed it to auto - delayed, but I don't think that this has nothing to do with the question. First try the service of Human Interface. I rebooted several times and the remote control of the TV still works. YES!

• Qosmio X 500-Media center remote control

  Hello

  Is it possible to use a Windows Media Center remote control immediately with a X 500?

  Hi regent8,

  I m X 500 not owner but if there is a remote control for X 500 available you can get it from your ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Just give them a call and ask for that. ;)

• Satellite A300D and ExpressCard Remote control

  Hello guys,.

  I own a Satellite A300D-135, y at - it an available for this model remote control? I'm looking for a remote control that fits in ExpressCard location as some HP models have.
  I looked at several Dutch hardware well known, but I can't find a remote that fits the ExpressCard location.
  I give many presentations and therefore use my laptop a lot. I would like to have a remote control that fits in ExpressCard location because that saves space and a remote control of such a size is easy to "hide" in your hand.

  Kind regards
  Hunterseaker

  As much as I know Toshiba doesn t offers remote control for this model of laptop. The question is whether a third party product is available on the market.
  To be honest I have no interest in something like that, but I just want to recommend you to visit the web page of Logitech. They have so many products for PCs and laptops. Maybe they have a solution for the remote control that you can use with your laptop.

  If you can find some interesting product please post the link.

  Good luck!

• Satellite P500-1DZ starts only with remote control

  Hi, I just bought a new laptop Satellite P500 after owning a P200-13Z and P300-160 years without ever having had a problem with one of them.

  I have a problem with the P500-1DZ that I bought because it does not start the power button when he was arrested for a period of time, as for example the night.

  If I stopped and immediately press the power button its fine and it starts as well with the remote control.

  In the BIOS, I noticed that there is an option for remote start to the top of the control that is enabled, but Im a little worried about this deactivation in case I can't restart the laptop... everyone has ideas?

  Also for other users of the P500 who are dissatisfied witht the audio output of the laptop, I fixed that uninstall the Audio drivers Connexant HD, then by restarting which allows Windows to install its own audio drivers... which has greatly improved the audio output of the laptop... even if its not as good as the old P300.

  Thank you

  Hi spidercpfc,

  This question really strange s with this start of the issue and I think that it of difficult to say why it happens exactly, but as written Akuma you should try upgrading the BIOS. You can download it from the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  Last week I updated the BIOS of my P500 also and it worked, I t has not had any problems. I updated the BIOS to the version preinstalled Windows as an administrator. Also, I closed all programs running (AntiVirus, Firewall, browser, etc.) and disconnected from the network. After a few seconds the update was done.

  After the update, you should also load default settings in the BIOS. So press F9 in BIOS setup and save these settings.

  I hope this works. :)

• Want to buy the remote control full size for Qosmio X 500-116

  Hiya,

  I am looking to buy a full-size remote for my Qosmio (little disappointed he did not come with one).

  First question is my machine not come with a remote control means that my machine will not work with a remote control? (the manual says that some machines come with them and others do not)

  I have looked on the toshiba site and did some research online, but nothing yet.

  If someone can point me in the right direction, I would be grateful

  THX

  Bren

  PS - It's the full-size remote, I am after not the slim size it (both are listed in the manual)

  Hello Bren

  In my opinion the situation is clearer:

  Some models are delivered with and without remote control. For remote control, you need equipment that send the signal (remote control you have in hand) and the device receiving the signal.
  Receiving so-called is built-in the laptop.
  If your laptop comes without remote control, I presume that he doesn t also have receiver inside.

  Following this logic, I don't think that your laptop works with remote but I do not understand what kind of remote you are writing about.

  I can only imagine that third part product with external remoter that can be connected to your Qosmio as USB device, you can buy. I'm sure that Logitech has these products in order to check a little Logitech page to see what they have to offer for multimedia application.

  Good luck.

• remote control stops working

  I have a 600PC Touchsmart with TV tuner comes with a remote control to control TV channels / volume... etc.

  It worked well for about 12 months. Now, the remote control works well when the PC is first turned on, but then stops working after about 20 minutes.  Only, it works again when the PC has been activated and turn it back on.

  I replaced the batteries and the remote control - but this happens again - which leads me to think that this is a problem in the PC itself.

  This may or may not be connected, but at the same time - the wireless mouse has stopped working and I had to buy a different mouse wth a wireless transmitter, connected to a USB port and now works fine.

  Any ideas what could be the problem?

  Hello jjf23,

  To see if it solves the problem, follow these steps:

  1. "control Panel."

  2 system.

  3. "Device Manager."

  4 expand "controllers of Bus USB"

  5 right click on each of the items listed individually and select 'Properties' for each item. If there is a "power management" tab click on it. Make sure that the "allow the computer to turn off this device to save power " unchecked.

  6 click on "OK" and "restart" your computer.

  If they are not already checked, simply reply with it.

  Thank you

• long-lasting problems after windows scammersr had remote control of PC

  I got Asian male phone call to the effect that I had serious problems with a virus on my computer. He claimed to be the appeal on behalf of Microsoft Windows. Is not not in computer, I followed a number of directions to him which eventually led to him have the remote control of my computer. The number of callers evil disguised alarm of "oh my God" etc the alleged problems he has discovered and when the purpose of the payment was raised, I ended the call. The call lasted about 40 minutes, and he had the remote for about 5 minutes. It seemed to me that it was associated with a site named PC technocrat. My fear is now that he can have some future remote access or caused other problems that I have not yet thought.

  Unfortunately, once you give someone the remote control of your PC, they can do whatever they want.  There is no way for you to know what they did or did not.  You must assume the worst - they left behind software that allows them to take control of your system and/or take all the information they want it without your knowledge, and that they took any information they wanted while being connected.  Then contact the banks and other institutions in finaicial you do business with and take steps to protect your accounts and your credit cards.  Next would be to save only essential or element files and documents such as photos, music, etc and then destroy your computer and restore to factory new.

• Application of remote control

  Hello

  I got a hp Pavilion Notebook M6, but what is happening is that the computer seens to be who is not capable of the remote control, I used to have another before the laptop hp than this one, I think it was a dv6, dv7 or something, but I tried to get a remote for my laptop of M6, the other day online and whem I specifically put the keyword , Iam "Remote control for hp pavilion m6" not able to see the results but just plugs for laptop hp dv6 and dv7.

  I really want to be able to use a remote control with this current computer (M6) for purposes of presentation College, but not sure if iam able to use a remote control with this phone iam.

  so my question is:

  I'll be able to use any type of remote control hp laptop with my laptop, even if it is not the same model which is the design of the remote control?

  Thank you.

  Ramosuco wrote:

  Hello

  How to check if she does?

  Hello

  What is your machine? Please use the following link to find your machine and obtain its complete listing

  http://support.HP.com/us-en/document/c00033108

  You can also check (under devices to Interface) Device Manager to see ALL IR (Infra red) DEVICE installed.

  Kind regards.

• Programming of the remote control

  I am able to program the buttons on the remote without problem but I have more than 60 deployed MD and would like to be able to program them all at once.  Is there a way to the DMM to write an application of advanced task that will program the remote button?

  Thank you

  Al

  Alan,

  
  

  Here's a technical tip I wrote on the programming of the remote control through the

  a HTTP mib.  Just create a task advanced under the task system

  for each color button.  Test & check if it works on a single DMP first and

  then send task for each color button to all of the DMP.  Once it is

  finished make sure you that you SAVE the configuration.

  
  

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

  
  

  
  

  ******************************

  
  

  You can use DMP MIBs to reconfigure the DMP Remote Buttons. VARIABLES =========   admin           = DMP Web Account Username   default         = DMP Web Account Password   a.b.c.d         = IP Address of DMP   dmm.company.com = FQDN of the Digital Media Manager(DMM) Appliance MIBS ==== ** Use the Following MIB to see the CURRENT Remote Mappings https://admin:[email protected]/* */:7777/get_param?p=*.*&init.pop_enable=false ** Configure Buttons RED https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */Dwww.cisco.com%22 GREEN https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */MD%3Dhttp://www.google.com%22 YELLOW https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */_CMD%3Dhttp://www.yahoo.com%22 BLUE https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */%3Dhttp://www.apple.com%22 ASSIGN A BUTTON TO CAST https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */Dhttp://dmm.company.com:8080/etv-flash-webapp/app/etv_24_.htm%22 ** Use the Following MIB to see the NEW CONFIGURED Remote Mappings https://admin:[email protected]/* */:7777/get_param?p=*.*&init.pop_enable=false ** Save NEW CONFIGURED Remote Mappings on DMP    -> Use the ADVANCED TASK to SAVE the DMP Settings.    -> or Directly on the DMP using the DMP-DM Web Admin    -> or HTTP MIB          ie.          https://admin:[email protected]/* */:7777/set_param?mib.save=1          https://admin:[email protected]/* */:7777/set_param?mib.save=1&mng.reboot=1 

• Ring of the remote control for a updated firmware A77 camera REQUIRED emphasis comments functionality and design?

  Hello
  It is a good complaint and at the same time a good stand on a feature I'd neeeeeed really put in an update of firmware for the camera of the A77 as soon as POSSIBLE (as soon as Possible) like others, I have already asked for what he moooooonths there!
  I have spent the money of the month and time in a machine to control the update in order to focus stacking without touching the camera... It does not give the expected results, but maybe after all, I will succeed.

  But of course, it would look pretty cheap technology around an expensive Sony which does not any Thetering for this device 3 times the price other cameras with this feature, "Thetering", a term which means remote control the camera from a computer or IPod, mobile phone, etc.

  FUNCTIONALITY NECESSARY:

  Everything is necessary at least to do something, would be the ability to reallocate the shutter half pressed the button to advance a specific step. When the focus is narrow, few measures are necessary, but it goes further, steps may be greater. The camera would limit its course to the limits of the focus ring. Once the button out (so not half or completely down) or when the update has reached the limit of development more far, it would be to take a last picture and bring focus back to its position closest to you, ready for the next batch of photo.

  Pictures would be taken when completely down. If the focus is not the position of the closet before splashed the process, we could do it manually or select an option from the menu.

  Another possibility would be to reassing these 2 keys of the remote control features: a to make one step back, one to make a step forward. The advantage of the 2nd button that allows a remote control, would be the possibility of backwards if we went off for a step.

  Overall, it would take very little programming to do this. (mainly add a menu option and the operation of each time button x is pressed, focus moves a step forward, a step being of size proportional to the distance according to a simple formula. Same thing for a button Y in the opposite direction.

  (1) what is the best way to communicate this request to the right people?

  If someone expect this feature too, please comment!

  (2) also, where we communicate comments on design issues?

  Thank you

  Hello Mark,

  Welcome to the community forums of Sony

  Thank you for your comments and feedback for the SLT - A77.  The answer to both questions is, Right Here.

  We are able to pass all your firmware requests and comments and suggestions regarding the product directly to the Digital Imaging Group.

  We can't promise or provide an ETA, however, we listen and as owners of the NEX-7 can attest, we can impliment when we can.

• Wish list of smart remote control

  I used the app smart remote with the Alpha 6000 and here are a few things I wish he can do.  Maybe if the community made a list, we can influence the development of products!

  1. display the meter on smartphone, if the device is in manual mode.  Currently, the only way we can adjust aperature and shutter and getting the right exposure is watch the meter of the rear camera.

  2 save Raw files only.  It is useful remote applications to record values such as the the White Balance, focus Mode, ISO and restores the original values when it stops.  However, it is not clear why the choice for some of them has been limited in the remote app.

  3. stored on images in-camera GPS closed.  The remote app not geolocate the JPG sent to the smartphone, but I do not use these images because of the low resolution.  As the phone is two-way communication with the camera, couldn't the location be stored in JPG and RAW images on the camera?

  4. seeing camera on smartphone battery level, given how remote app burning through camera batteries.

  5. not sure why the remote app changes the display on the back of my camera.  Rear camera screen, I used to use has no vision of the image, but a lot of information of the camera, because I use the viewfinder for all shots except with the remote app. This view is not available when the Smart remote control is running.

  6. do you have full access to view and change the camera settings while the remote control is running.

  Hi davidkahn,

  Welcome to the community of Sony!

  And thanks for letting us share your suggestions. We will provide him the service of engineering for the development of future products.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Windows remote control troubleshooting

  Has anyone developed an effective method for troubleshooting Windows remote control?  I am continually frustrated by the inability to determine why a particular command that I test on doesn't seem to work.  On Unix the secondary files are written on the server, and those who can be very useful to determine what failed and why.  Is there any sort of similar to the side Windows?

  If it is VBScript, please explain, because I'm not at all a VBScripter.  I had a background in C++ and Java and am self-taught in Perl and Kixtart, but I only know the basics of VBScript.

  Here's a command remote example is very complex to help you.

  This particular example collects all the tasks scheduled in 2003 and 2008.

  I usually do a simple worker. VBS that does the job.  In this case, his CSV2MIF. VBS

  And then a simple remote command of wrapper to call the worker.  These should be. VBS, but they don't have to do much.

  The worker could be anything. EXE or perl script.

  Web-based online help also addresses the use of EcmEventLog (back in the Windows event log)

  and ECMDebugEvent which dates back to the collector but I do not use them.  Objects are only available in the command distance itself (Sub don't work).

  It is the old style to the remote controls, not the new stuff based on powershell.

  For this, we work, you must also have parsemif.exe registered on your collector.  It's what the line

  strParser = EcmAgtContext.GetHelperAppFile ("parsemif.clsparse")

  is.

• Support of remote control options to view 4 desktops

  Can someone suggest a support remotely appropriate office application?

  We use currently NetOp v9.2.2 remotely control our physical computers for the management of the end user. It allows several customers view and control a single host for collaboration, etc. Runs as a service and is fast.

  However, it doesn't play well with desktop view mode RDP. Works very well in mode of PCoIP but conflicted with RDP.

  DameWare is my next choice, but their customer service is a show-stopper. Any other suggestions?

  Any help is appreciated.

  Thank you

  Ken

  We had this same problem and I can't say that we have resolved yet. We use LANDesk here on campus, so it would have been nice to use his ability to remote control integrated as we do for our physical machines.  Unfortunately, the landesk agent and pools of related clones don't play well together.

  I have not yet tested, but I looked at using WebEx Support remotely:

  http://www.WebEx.com/product-overview/Support-Center/remote-support.html

  There was a conversation at VMWorld in the fall that remote assistance could be a new feature in a future version of view - but it doesn't look like to me he was coming very soon.

  Jeff

• Non-responding TV/remote control

  My model #KDL - 52EX700 Sony TV does not respond for 4-5 minutes after ignition. My remote is a RM-YD033. Have replaced the batteries in the remote control, but still will not respond. All that is on, when I turn on TV will stay because I am unable to change anything for about 5 minutes. Help!

  Hello jrw4par, thank you for bringing your concerns to our attention.

  Follow these steps to troubleshoot a remote that no longer works or does not work properly:

  1. make sure the device you're trying to control works.

  • Plug it into an electrical outlet that works, you know.
  • Switch on the device with its own switch (not the button on the remote control).

  2. make sure that the remote control not less than 3 feet and no farther than 10 feet away from the unit.

  NOTE: With the help of the remote control too closely or too far could prevent the infrared (IR) beam to reach the device IR sensor.

  3. when using the remote, remember, so that it points directly to the remote unit sensor.

  4. If the remote control has the ability to be set for different functions (TV, comics, DVD, to THE, STB, etc.), ensure that correct operation is selected.

  NOTE: See the user manual to determine if the remote control has the ability to be set for different functions and, where appropriate, for instructions on how to configure these functions remotely.

  5. remove all the obstacles that may be in the path between the remote control and the unit. Glass doors or enclosures can affect the signal from the remote control. Try to open the glass doors to see if that makes a difference.

  6. make you sure the device IR sensor is not exposed to the direct rays of the Sun or fluorescent lights or halogen. Bright lights shining directly on the IR sensor can interfere with the reception of signals from the remote control.

  7. check that the remote control sends an IR signal.

  8 remove the batteries from the remote control, press each button two times, and then reinstall the batteries.

  9. install alkaline batteries.

  IMPORTANT:

  • Don't use rechargeable batteries.
  • Ensure that the batteries are inserted correctly by matching the polarity of the batteries with the + (PLUS) and - (LESS) the symbols in the battery compartment.

  10. do a power reset for the device or component that the remote is supposed to control.

  NOTES:

  • Most of the components can be reset by unplugging the power cord from the electrical outlet for a minute.
  • Refer to the operating instructions for the component to get specific instructions on how to perform a power reset.

  If this post helps you resolve your concerns, please let us know by accepting this post as a solution.