Difficult to understand the name of netbooks Toshiba
It is difficult to understand the designation of toshiba netbooks for beginners is this prefix after etc. 500 550 nb-113 110 tell us about the battery? What is the best?
Thank you and sorry for the bad English. What battery keeps arround 10 hours? Why NB305 (money) is more expensive than 500?
Each Toshiba laptop inside has Toshiba label with basic information.
It is written to the first name of the model: for example NB500-113
Then you can see the number of pat s notebook: for this Satellite is PLL50E-xxxxxxx.
Generally two numbers don t say much but for your info:
The model name is depending on the country. For example, NB500-113 may be available only in Germany, but you won't find it in Spain. In Spain we NB500 - 22H. If the two laptops have the same reference number that designates two of them have identical hardware platform with identical inside hardware components.
Toshiba NB500 offers three different numbers - PLL50E, PLL60E and PLL5ZE. With other words, you can buy NB500 with three different technical facilities. It is also possible that one of them will be offered in your country. It is defined by Toshiba s marketing strategy.
What you need is good info on models available in your country. Please visit the support page of Toshiba for your country http://pc-support.toshiba-europe.com/ and option computers laptops & Netbooks.
Compare all available models and look for info on equipment and the battery.
I hope you now understand how it works. :)
If you have any other questions you are welcome.
Tags: Toshiba
Similar Questions
-
I know it's stupid, but I can't understand the names for my damage
I am trying to download the drivers for my Dell with XP Home Edition.
The problem is that I don't know the names of the equipment, so that I need drivers. When I call SYSTEM then hardware, and finally all the Device Manager I see for my CONTROLLER ETHERNET is a big yellow question mark. I need more than that. I can click through the entire region and I can't find the name so I can download the appropriate driver. Until I get that fixed I can not the XP Dell Online to download the rest of my pilots through the automatic set up.Any help MUCH appreciated.
Thank you;
DukeIf you put the Express Service Code on your Dell computer in the Support page and drivers, this should lead you directly to the downloads you need for operating system and hardware that came with your Dell computer. The code is located on a sticker on the computer, they usually come with him in two or three different places.
-
Can I get 1 simple and not 500 response difficult to understand the answers on a firefox theme
Very simply. Step 1. How can I get the icon of firefox on my screen.
See:
-
problem: the NAME Web site sits on the tabs, cannot select the tabs?
Hello, I have this problem.
NAME of the site is on the top tabs, which means that I do not see some tabs, because the text is the way the. -This site ' ask a Question '. Firefox Help"covers the tabs.
Also, I can't click on the tabs unless I click at the bottom of this one. That means that in most cases, I can not change the tabs unless I find the 1 mm space that accepts my click. If I click in the middle of the tab, nothing happens.
Here is a picture of my problem.
https://picasaweb.Google.com/110887846690971472921/FirefoxProblem
as you can see, it is difficult to read the name of the site is very difficult to read, and tabs can be read as well.
Please recommend a solution, I've been using Chrome because of this problem.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
Determine the name of a Javascript Button icon file?
HelloSome time before, I created some buttons in JavaScript and then specified the names of files for their icons. Now, when I go back to the properties of the button for these buttons dialog box, specifically the Options tab, it doesn't tell me the names of the files that I specified originally for the icons. The 'Label' field is empty. It would be really useful if the ' Label: ' field would specify, by default, the file name of the CURRENT icon associated with the button I look.
The button Properties dialog box is displayed a very small image of the icon in the "icon:" box, but this image is not enough for me to understand the name of the original file of the icon.
If I click on "select icon...". ", it seems to show the last file icon I selected (which is of no help), not the file name of the icon which I am looking at properties.
Is there some way look at the properties of a button and determine what the icon file was associated with the key? Once again, the small picture in the "icon:" box is of no help.
Thanks for your help with this issue.
DaveThe file name is not stored in the PDF file, only the icon.
-
Get the name of the folder after parent.
Hi forum.
I need a big help on your part.
If I could get the name of the folder that is between the office and the indesign files where it saved ls...
for example.
/Users/wleastudio/Desktop/rantacacb.indd.
I need to get the file name selected in red and alert...
If it isn't immediately on desktop I can do easily alert as below...
name = Folder("/Users/wleastudio/Desktop/");
If (app.activeDocument.filePath == name.path + "/" + name.name) {}
Alert ("the document is in the office"), out;
}
If the document is saved in a folder on your desktop, that's the problem, I find it difficult to find the name of the folder and get alert...
/Users/wleastudio/Desktop/rantacacb.indd.
Thanks in advance
Hello
artCraft2 wrote:
...
If it isn't immediately on desktop I can do easily alert as below...
...
It's always all right way:
the last folder name: app.activeDocument.filePath.parent.name
last folder: app.activeDocument.filePath.parent
You could step using parent.parent and so on...
Jarek
-
How to find the name of form?
Hello
Try to understand the name of the form, but do not get the result following desired:
If (xfa.form.name == "form050") then
...Any suggestions? Thank you.Veni-Your code does not because of 'then', which is not javascript.
That is the line fails silently, I find quite strange. If not an exception, the js engine must generate at least a syntax error. What happens is that it simply continues execution.
What produces the same behavior:
if (false) askldalksdjhaldh { app.alert("you should never see this message."); }
This generates an error (as it should):
if (false) askldalksdjhaldh { app.alert("you should never see this message."); }
-
Frustrated - how can it be difficult - I want to just display the name of the users.
I don't understand. Why its so difficult to simply display a username at the end of a quiz. I tried all day! I use A4. I tried to use a text input box but cannot find how to get the entry to view the quiz results page. This task is so easy using Trainersoft and Courselab. Can someone help please.
Ken
Hi Ken,
On the first slide, add a box to input text and using the tab Options make you you disable Validate user input options. I would also say that you keep the option button selected. Then, in the Advanced tab of the text entry box, enter the name of your variable such that "jullymornau" click OK. Now on the last slide Add a text caption. In the text of the Caption dialog box, click the last button labeled "insert Variable" by default your user variable such as "jullymornau" should appear in the menu variables, just click OK.
Now when you preview, you should be able to insert a name. When you click the button, you just move to the next slide in your project. On the last slide the name you entered in the text box entry, must be included in the text of the legend.
HTH
Best - Mark
-
Difficulties to display the full name of the contact in my list of people in Outlook
The list of people in Outlook does not appear correctly and I can see the partial names of onlly, I see half superior of the name with the botom half of the name not displayed. Also this morning when I open Outlook and checked my "list of people" no names were present, they all had disappeard but about 1/2 hour later, they were suddenly back.
Have you tried to access your account using a different browser or computer?The same problem occur?
The first step in troubleshooting is to clear browser cache/cookies.For the Internet Explorer browser: press CTRL + SHIFT + DELETE, and then click on remove
For Google Chrome: Simultaneously press CTRL + SHIFT + DELETE, and then click clear browsing data
For Firefox: Press CTRL + SHIFT + DELETE, and then click clean now(other browsers are similar)For a great experience, you need to update your browser to the latest version and make sure that the latest version of Microsoft Silverlightinstalled and running for browsers that support it.
Outlook.com is optimized for the following browsers: Windows Internet Explorer 8, 9 and 10; Google Chrome 17 and higher; Firefox 10 and higher; and 5.1 on Mac Safari.Outlook.com is good on the following browsers, but some features may not display properly: Internet Explorer 7, Google Chrome 5, Firefox 9 and 5 and Safari 5.1 on Windows or Safari on Windows and Mac 5 and 16.Outlook.com is not supported on the following browsers: Internet Explorer 6 and higher, Google Chrome 4 and higher, Firefox 4 and higher, Safari 4.x and more... -
Mac Mini to crash, trying to understand the panic report
My Late 2009 Mac Mini Core2Duo 8 GB Ram started to crash and this is the last report of panic. I don't understand what is the error.
Anonymous UUID: 89505A63-49A1-1409-1B56-F6C97DB19897 Sun Apr 10 16:06:38 2016
Panic report *.
panic (cpu 0 0xffffff801eef437e appellant): ' thread_invoke: preemption_level 1, possible cause: blocking while holding a spinlock, or within interruption context"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.40.184/osfmk/kern/s ched_prim.c:2068.
Backtrace (CPU 0), frame: return address
0xffffff812896b800: 0xffffff801eedab12
0xffffff812896b880: 0xffffff801eef437e
0xffffff812896b910: 0xffffff801eef0def
0xffffff812896b950: 0xffffff801efc6650
0xffffff812896b9c0: 0xffffff801f486c3c
0xffffff812896b9f0: 0xffffff801f486c9f
0xffffff812896ba10: 0xffffff801f48c420
0xffffff812896ba30: 0xffffff801f48c45d
0xffffff812896ba40: 0xffffff7f9fc31557
0xffffff812896bae0: 0xffffff7f9fd1e0cc
0xffffff812896bbc0: 0xffffff7f9fbe2e8c
0xffffff812896bc30: 0xffffff7f9fc294c4
0xffffff812896bcc0: 0xffffff7f9fc31892
0xffffff812896bd00: 0xffffff7f9fb54a7c
0xffffff812896bd80: 0xffffff7f9faeadcc
0xffffff812896be10: 0xffffff801f4b5958
0xffffff812896be80: 0xffffff7f9faea65f
0xffffff812896bee0: 0xffffff7f9faef971
0xffffff812896bf20: 0xffffff7f9faef6cf
0xffffff812896bf40: 0xffffff801f4b27c1
0xffffff812896bf80: 0xffffff801f4b28b6
0xffffff812896bfb0: 0xffffff801efc8e27
Extensions of core in backtrace: com.apple.iokit.IOUSBHostFamily (1.0.1) [4C8B5BB6-6AE4-313E-B79C-AC07A4E31A2D] @ fffff7f9fab6000-0xffffff7f9fb1efff > 0xf dependency: com.apple.driver.AppleUSBHostMergeProperties (1.0.1) [52E62355C]@0xffffff7f9fab2000 9D5F86A1-76EF-3007 - 94 CA-496 com.apple.iokit.IOUSBFamily (900.4.1) [7B5AC81A-D0B6-3F3D-87C7-AFD78F4686DB] @0xfff fff7f9fb28000-> 0xffffff7f9fbc1fff dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f9f72c000 0xffffff dependency: com.apple.iokit.IOUSBHostFamily (1.0.1) [4C8B5BB6-6AE4-313E-B79C-AC07A4E31A2D] @0 x ffffff7f9fab6000 com.realtek.driver.RtWlanU (1830.2b9) [341CBE7A-D4DF-3A6D-A06E-92B6EE2F4EA4] @0xfff fff7f9fbd4000-> 0xffffff7f9ff46fff dependency: (3.2) com.apple.iokit.IONetworkingFamily [848B398F-4D96-3024-8092-6CD3534D2CCA] @0 xffffff7f9fa7e000 dependency: ffff7f9fb28000 @0xff com.apple.iokit.IOUSBFamily (900.4.1) [7B5AC81A-D0B6-3F3D-87C7-AFD78F4686DB] Corresponding to the current thread BSD process name: kernel_task
Mac OS version:
15E65
Kernel version:
15.4.0 Darwin kernel version: Fri Feb 26 22:08:05 PST 2016; root:XNU-3248.40.184~3/RELEASE_X86_64
Kernel UUID: 4E7B4496-0B81-34E9-97AF-F316103B0839
Slide kernel: 0x000000001ec00000 Text of core base: 0xffffff801ee00000
Text __HIB base: 0xffffff801ed00000
Name of system model: Macmini3, 1 (Mac-F22C86C8)
Availability of the system in nanoseconds: 13927482804366
last load kext to 13844240430139: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7fa1bbb000 size 32768)
Finally unloaded kext to 13907399057741: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7fa1bbb000 size 32768)
kexts responsible:
com.realtek.driver.RtWlanU 1830.2.b9
com Apple.filesystems.afpfs 11.0
com Apple.NKE.asp - tcp 8.0.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.ApplePlatformEnabler 2.6.0d0
com.apple.driver.AGPM 110.21.18
com Apple.filesystems.autofs 3.0
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleMCCSControl 1.2.13
com Apple.Driver.pmtelemetry 1
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.iokit.IOBluetoothSerialManager 4.4.4f4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHV 1
com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0
com.apple.driver.AppleLPC 3.1
com.apple.GeForceTesla 10.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.4f4
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0
com.apple.BootCache 38
com.apple.driver.AppleIRController 327,5
com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1
com.apple.iokit.SCSITaskUserClient 3.7.7
2.8.5 com.apple.iokit.IOAHCIBlockStorage
com.apple.driver.AirPortBrcm43224 700.36.24
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.1.8
com Apple.nvenet 2.0.22
com.apple.driver.usb.AppleUSBOHCIPCI 1.0.1
com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 4.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 4.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com Apple.NKE.applicationfirewall 163
com Apple.Security.Quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.security.SecureRemotePassword 1.0
com.apple.AppleGraphicsDeviceControl 3.12.6
com Apple.kext.Triggers 1.0
com.apple.driver.AppleSMBusController 1.0.14d1
com.apple.iokit.IOSurface 108.2.1
com.apple.iokit.IOSerialFamily 11
com.apple.driver.CoreCaptureResponder 1
com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0
com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0
com.apple.nvidia.classic.NVDAResmanTesla 10.0.0
com.apple.driver.AppleHDAController 274.7
com.apple.iokit.IOHDAFamily 274.7
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.4f4
com.apple.iokit.IOBluetoothFamily 4.4.4f4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 6.0.0d7
com.apple.driver.AppleSMC 3.1.9
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1
com.apple.driver.AppleUSBAudio 303.3.1
com.apple.iokit.IOAudioFamily 204.3
com.apple.vecLib.kext 1.2.0
com.apple.driver.CoreStorage 517.20.1
com.apple.iokit.IOUSBHIDDriver 900.4.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7
com.apple.iokit.IOUSBMassStorageClass 4.0.2
com.apple.iokit.IOUSBMassStorageDriver 1.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7
com.apple.iokit.IOBDStorageFamily 1.8
com.apple.iokit.IODVDStorageFamily 1.8
com.apple.iokit.IOCDStorageFamily 1.8
com.apple.driver.usb.AppleUSBHub 1.0.1
com Apple.Driver.USB.cdc 5.0.0
com.Apple.Driver.USB.Networking 5.0.0
com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1
com.apple.iokit.IOAHCISerialATAPI 2.6.2
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7
com.apple.iokit.IO80211Family 1110.26
com Apple.Driver.corecapture 1.0.4
com.apple.iokit.IOFireWireFamily 4.6.0
com.apple.iokit.IOAHCIFamily 2.8.1
com.apple.iokit.IONetworkingFamily 3.2
com.apple.driver.usb.AppleUSBOHCI 1.0.1
com.apple.driver.usb.AppleUSBEHCI 1.0.1
2.2.9 com.apple.driver.NVSMU
com.apple.iokit.IOUSBFamily 900.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOUSBHostFamily 1.0.1
com.apple.driver.AppleUSBHostMergeProperties 1.0.1
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com Apple.Security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 417.2
com.apple.iokit.IOStorageFamily 2.1
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 4.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.Libm 1
com Apple.KEC.pthread 1
com Apple.KEC.corecrypto 1.0
Model: Macmini3, 1, MM31.00AD.B00 of BootROM, 2 processors, Intel Core 2 Duo, 2.26 GHz, 8 GB, MSC 1.35f1
Graphics card: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory module: DIMM0/0 BANK, 4 GB DDR3, 1067 MHz, 0x859B, 0x435434473353313036374D2E4D3136464B44
Memory module: DIMM0/1 BANK, 4 GB DDR3, 1067 MHz, 0x859B, 0x435434473353313036374D2E4D3136464B44
Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 90), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.4.4f4 17685, 3 services, 27 aircraft, 1 incoming serial ports
Service network: Ethernet, Ethernet, en0
Network service: Wi - Fi, AirPort, en1
Serial ATA Device: ST500LM021-1KJ152, 500,11 GB
Serial ATA Device: OPTIARC DVD RW AD - 5670S
USB device: USB 2.0 Bus
USB Device: HDD external
USB Device: 802.11n NIC
USB device: USB 2.0 Bus
USB device: USB Bus
USB device: USB 2.0 hubs
USB device: USB keyboard
USB device: Gaming mouse
USB Device: IR receiver
USB device: USB Bus
USB device: C-Media USB Headphone Set
USB device: Hub BRCM2046
USB Device: USB Bluetooth host controller
Crush Bus:
The panic was apparently caused by the Realtek USB network device or its software. I suggest that you unplug the unit and then remove the software.
Any third party software that is not installed on the App Store or by drag-and - drop in the Applications folder and uninstall by drag - move to the trash, is a modification of the system.
Whenever you delete changes to the system, they must be eliminated completely, and the only way to do this is to use the uninstall tool, if any, provided by the developers, or follow their instructions. If the software has been removed incompletely, you may redownload or reinstall even to finish the job.
I never install modifications of the system myself, and except as stated in this comment, I do not know how to uninstall them. You'll have to do your own research to find this information.
Here are some general guidelines to help you get started. Suppose you want to remove the so-called "BrickMyMac" (a hypothetical example). First of all, menu using the product, check if there is one, for instructions. Not finding here, look at the Web site, let's say www.brickmymac.com. (Maybe it's not the name real site, if necessary, search the Web for the name of the product). If you don't find anything on the Web site or in your search, contact the developer. While you are waiting for a response, download BrickMyMac.dmg and open it. There may be a request here as "Uninstall BrickMyMac." If this is not the case, open "BrickMyMac.pkg" and look for an uninstall button. The uninstall program can also accessible by clicking on the button customize, when one exists.
Back up all data before making any changes.
Generally, you will need to restart the computer in order to perform an uninstall. Until you do this, there may be no effect, or the unpredictable effects.
If you can't remove the software in any other way, you will have to erase and install OS X. Never install any third party software, unless you're sure you know how to uninstall in the contrary case, it can create problems which are very difficult to solve.
Try to remove the complex system of changes by hunting for files by name, often will not work and can make the problem worse. The same goes for 'utilities' as the 'AppCleaner"designed to remove software.
-
Hello
Sorry if this has been posted before, I did the search first, but can't find anything.
Problem is that I have two configurations which are identical and must be ordered by a single vi. Given that they are the same, they are configured with the same sets of parameters so I decided to create a cluster of these and then build an array of clusters. In this way I need to use only a thread and if I need a given parameter I can get it easily from here (or so I thought) and also because I need to see if anything changes I can compare a thread instead of each of the parameters.
The gui has the list of parameters, then in the block diagram I group them appropiately, using "Bundle name" and then each bundle in a table by using "build the table. Problem is when I have the index in the array for the first place of the configuration and usage to unbundle the parameters I need, using "ungroup by name" (although if I use "Unbundle" the same thing happens) and lo and behol, the output names come from the configuration of the second, not the first.
Here's the curious thing, though, even if the names are all wrong, that the values are correct. I could live with that, but it's more boring it will be another very difficult user to understand the schema more this is just a proof of principle to test with two, eventually there will be eight or more and who's going to get really confusing.
Is there a way to get around this? Even if it is to change the names after unbundling.
Check the attached vi to see what I mean.
I think you forget an important point on the tables. The only thing that may be different between each element of a table is its value. The elements in the array must all share the same properties. This would therefore include the names of the different elements that make up the cluster that is a table element.
It seems that the last group that builds in the table is the one that defines the names of the items that are in the element of the cluster. You must give all elements of the array with the same name within the cluster. Or use a cluster of clusters rather than a table of cluster to create your data structure.
-
WMP changes its name at the time where I change the names in the playlists
Hi people, to support
I have XP and WMP 11. I love working with WMP very much but I have a big problem with the creation of playlists.
First, he must know that. If I make a playlist of different artists like this and sync it to my MP3 player, the player will put all the artists and the album separately names in its lists of an artist folder and album that creates a huge long folder to browse to the 'normal' CD That's why I change at least the various names of artists in 1980, for example has a slow. A brilliant solution, was it not for the fact that WMP is very difficult to accept these changes in the mine. He continues to change the names of 'my' name of origin found in their records. After changing several times later he accepts it, most of the time. But... the problem is worse when I want a particular song appear in more than one playlist, as Slow 1980 and slower. He even sometimes change the names I put in the original name in the original records. I hope you understand what I'm trying to explain, and it drives me nuts keep changing the names. (You probably also I know I have change the names in WMP or in the files folder.)
How can I solve this? Thanks a lot for help.
Hello
To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:
Step 1:
Exit Windows Media Player.
For Windows XP:
(a) click Start,
(b) click Run,
(c) type %userprofile%\Local Settings\Application Data\Microsoft\Media Player,
(d) and then click OK.
Note You don't have to remove the folders that are in this folder.
(e) restart Windows Media Player.
Note Windows Media Player automatically rebuilds the database.
Step 2:
If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
(a) output Windows Media Player.
(b) If you are running Windows XP, click Start, click run, type %userprofile%\Local Settings\Application Data\Microsoftand then click OK.
Note Windows Media Player automatically rebuilds the database.
See also:
Create and use your own customized reading lists
http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/playlists
Add or edit media information
http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/album-info
-
Received phone call from a man named Thomson. He said he was with Windows in the United States and Florida. Was given the phone number of 315-506-4544. Asking for help with problems with my computer detected by Windows. He said that I was risking my computer and overwriting of files. Very difficult to understand. He asked I right click on my computer and highlight all the files with any questions. I didn't trust this person so I hung up the phone. I continued to return calls 4 - 5 times. This doesn't seem to be a legitimate caller. My security proovider is AVG and they say my computers are recording to date. Was it a bogus scam
Hello
Its as SCAM!
The number is either usurped or re-directec to another number or even another country.
-506 (315) - 4544
http://www.numberinvestigator.com/phone/315-506-4544.htmlAvoid scams to phone for tech support
http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspxIn the United States, you can contact the FBI, Attorney general, the police authorities and consumer
Watch groups. Arm yourself with knowledge.The Internet Crime Complaint Center (IC3) is a partnership between the Federal Bureau of Investigation
(FBI) and the National White Collar Crime Center (NW3C), funded in part by the Bureau of Justice Assistance
(BJA).
http://www.ic3.gov/complaint/default.aspxNo, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
computer. So that's the fraud or scams to get your money or worse to steal your identity.Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
phone calls to help you fix your computer
http://www.Microsoft.com/protect/fraud/phishing/msName.aspxScams and hoaxes
http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3Microsoft Support Center consumer
https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1Microsoft technical support
http://support.Microsoft.com/contactus/?ws=support#TAB0Microsoft - contact technical support
http://Windows.Microsoft.com/en-us/Windows/help/contact-supportI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Need to change the name of the administrator under the folder of the user account
I just got a new HP laptop with Windows Vista 64 SP1. My friend who got the laptop I use a nickname that I hate it when he set up the computer for which it was not supposed to do in the first place. I went to the section control panel user accounts control and changed the name of the administrator account. I have only the administrator account on my computer with the guest account. That part worked.
My problem is that, under C:/Users / (username), it still shows that hated nickname. I want to change the name of this folder, but cannot understand how or if it's possible. Can anyone help? Thanks in advance
As you have discovered, you cannot change a user account by simply changing the name. That will be a change cosmetic only and none of the files/folders real profile will be changed. Follow the instructions below to fix things to your liking and to implement correctly under Vista user accounts.
1. create the new user account (named as desired) as a * standard * (not administrator) account and at least one additional account with administrative privileges. Call the extra account 'CompAdmin', 'Tech' or similar.
2. Enter the new user account once if the profile files are created, and then disconnect and then connect to CompAdmin.
3. go in Control Panel > system > advanced > user profile > settings
4. you will see where you can copy user accounts. Copy the misnamed old account to the new name correctly there. Use her browse to select your new account (C:\Users\newaccount). If you don't want to copy all the settings, and then instead simply navigate using the old user, music Explorer Windows Documents, etc. and copy the data to the new user folders.
5. connect to your new correctly named user account. When you are sure to have what you need, you can delete the misnamed control panel user account > accounts to users if you wish.
General information about configuring users in Vista:
You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.
In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.
The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. If your normal user account is an administrator, having created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:
Start Orb > Search box > type: netplwiz [Enter]
Click continue (or provide an administrator password) when you are prompted by UACUncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
MS - MVP - Elephant Boy computers - don't panic! -
The single Win Explorer Navigation pane click on the name of the folder to expand the subfolders
In Win XP, you can even click on the folder name to develop the next level of subfolders.
In Win 7, it takes a double-click and the > is difficult to achieve.
What a pain. How can get fixed?
Other than replacing by another file manager.
Hello
I understand that you are facing difficulties during the expansion of the subfolders on the Windows Explorer Navigation pane. I understand the inconvenience.
You must expand the tree first and then do the following.
1. open WindowsExplorer.
2. expand and click on Tools folder options -->
3 in the navigation pane, select the check box to display all records and extend automatically to the current foldedr and click ok.
You can also follow the steps in the article.
http://support.Microsoft.com/default.aspx/KB/126449Hope it will be useful. If you still have questions, please reply and we will be happy to help you.
Maybe you are looking for
-
Phone will not longer automatic locking, no matter what time, I put
My phone is no longer auto-lock. I set to auto power off after 30 seconds, but it will not lock. He never asks a password or my thumb print more. I can use my left index finger, for example, to wake and slide to unlock. Don't never request for pas
-
Is my computer better after BIOS update?
Dear Sir.I have the idea that my tecra M2 works better after upgrading the bios (from 1.3---> 1.5): sometimes I had the problem that wifi has not begun well, the fan was too often running: after the upgrade of these things worked much better!Some peo
-
LaserJet 3055: LaserJet 3055-Q2612A new ghosts of printing cartridges
I just installed a new cartridge Q2612A in my LJ 3055 printer. Print 'Phantom' of the page image and text in the document, I which to print. The appaers to ghosting on the entire page, with dark greased about 1/4 "on each vertical edge (portrait prin
-
I have a printer HP Laserjet 5 p, old but works very well. It is wired to a cable to plug into the computer. However, I now have a new computer, with no parallel port and will need to talk to the printer via a USB port. Is there an adapter avail
-
The EqualLogic PS6100 firmware update
Hello We have EqualLogic 6100 with SAS drives and want to update the firmware of 5.2.2 to version 6.0.5. It is a simple process? Thank you