Digital Media Designer problem when loading a file?

Similar Questions

• problem when loading data file DB

  Hello
  
  I am new to ODI,
  
  I just do a test, loading DB data in the text file, I did encounter a problem,
  
  a DB table has two columns, ID and NAME,
  
  I created a text file "TEST.txt", as follows,
  ID NAME
  2B
  
  I created a logical and physical structure in the topology, and created, last model creates the interface, selected 'LKM SQL SQL' and 'IKM SQL incremental update.
  
  Then run the interface, it had mistakes, said 7000: null: java.sql.SQLException: ODI-40475: invalid column: C1_ID',.
  
  I found it will remove the 'TEST.txt', and recreated, but column names have been changed, C1_ID, C2_NAME, IKE
  
  If so, how can I load table DB file with success and the name of the columns in the DB table were the same as the name of the columns in the file.
  
  Thank you!

  Hope you have selected "Different from the target of the staging area" and set it to any schema RDBMS?

• Windows media player has encountered a problem when downloading the file. for additional assistance, click web help.

  Original title: unable to audio stream.

  Unable to audio stream, "windows media player has encountered a problem when downloading the file.  for further assistance, click web help' web help does not work, clicking web help does nothing (no response from program... a lot of negative response from me) stuck with the big pass... vista 64 bit... a lemon from the getgo... problem after problem...

  Hi Joseph,

  What is the file format of the file you are trying to download?

  This problem normally occurs when the Media player could not play the file downloaded or not supported.

  Method 1:

  Step 1: Here is the list of the formats supported by Windows Media player file:

  Information on the types of media files that supports Windows Media Player:

  http://support.Microsoft.com/kb/316992

  Note: See if the file format is in this list, if it is not there, you may need a third-party codec that can read the file.

  Step 2: For more information about codecs, see article given:

  Codecs: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 2:

  I also suggest you to run the Windows media player Fixit:

  Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  Hope this information helps.

• "Windows Media Player has encountered a problem when burning the file to disk"?

  "I ENCOUNTERD CE WHEN BURNING YEAR MP3 AUDIO CD AND NOW I wanted TO KNOW WHY IT WON'T WORK THAT IS THE CODE POPPING up" Windows Media Player has encountered a problem when burning the file to disk ' WHAT CAN BE THE PROBLEM

  Hello MactabardX,

  I try and remove Windows Media Player and then reinstall it.
  Uninstalling and reinstalling Windows Media Player:
  Step 1.
  Uninstalling Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. search for multimedia and uncheck the brand in the face of Windows Media Player.
  4 restart the computer
   
  Step 2.
  Reinstall Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of the Windows Media Player.
  4 restart the computer.

  If you encounter problems with Windows Media Player, try to use the Troubleshoot utility to see if that fixes the problem.

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click the Windows Media Player settings.

  If the size of the .wmv files is too large, it can cause Windows Media Player to stop working.

  I try and remove videos from Windows Media Player library and test to see if the size of the files could be a problem.

  If please reply back and let us know if these steps helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error when trying to play multimedia file: Windows Media Player has encountered a problem when reading this file.

  Windows media player

  I get the message "windows media player has encountered a problem when reading this file", and in the media player screen, he says 'changing media '.  What does all this mean?

  Hello

  1. when the question is is produced?
  2. don't you make changes to your machine before the problem?
  3. What is the format of the file you are trying to play?
  4. you play a file from a CD or DVD, or from the hard drive?

  I suggest that you follow the steps mentioned below and check to see if they help.

  Step 1:

  Open the troubleshooter in Windows Media Player settings and check if the problem persists.

  Step 2:

  Check if the file you are trying to play requires no codecs.

  Codecs: Frequently asked questions

  Step 3:

  Uninstall and reinstall Windows Media Player:

  A.
  a go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer
   
  B.
  Reinstall Windows Media Player:

  a. go to start and in the search type 'Turn Windows has or not'.
  b click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of the Windows Media Player.
  d. restart the computer.

• Windows Media Player has encountered a problem when downloading the file

  Original title: Windows Media Player does not work

  What this means: Windows Media Player has encountered a problem when downloading the file? and what do I do about it?

  Johnny: What are your exact measurements that lead to the error message?

  Temporary compensation Internet filed and the Cookies Internet Explorer could help.

• When I want to burn a CD in Windows Media Player, it shows "Windows Media Player has encountered a problem when burning the file to disk". What's wrong? How to fix?

  When I want to burn a CD in Windows Media Player, it shows "Windows Media Player has encountered a problem when burning the file to disk".    What's wrong? How to fix?

  I tried several times to remove the selection to burn and create a new a new but it keep "Windows Media Player has encountered a problem when burning the file to delivery" appears what should I do?   What problem is it?

  Hello

  1. what file format you are trying to burn?

  2. have you made changes on the computer recently?

  3. What is the security software installed on the computer?

  If it's something you downloaded, it may be copy protected by DRM, in which case you may not burn it to a CD or DVD.

  Here are a few things to try:

  1. make sure that the disc is clean.

  2. try a different brand of blank discs.

  3. stop all other programs that are running.

  4. make sure that the hard drive does not use disk compression.

  I suggest that you follow these steps and check if they help to solve the problem.

  Method 1:

  Try to use the Troubleshoot utility to see if that solves the problem.

  a. open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel.

  (b) in the search box, type "convenience store" and then click Troubleshooting.

  c. click on show all and then click the Windows Media Player settings.

  Method 2:

  Select a recording speed (write) more slow for the CD burner.

  Change settings for burning a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Method 3:

  If you have any third-party burning software, I suggest you temporarily Uninstall it and then try to burn the disc using Windows Media Player.

  Note: Reinstall the software after the trial.

  Method 4:

  Temporarily disable all programs that could activate themselves, while burning is in progress, such as screensavers or anti-virus programs.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  I hope this helps.

• Installation of the Photoshot 13 elements. error message: "this is a problem when extracting the files. Check the amount of space available on your computer and the rights to write to the destination folder. I have 1.38 TB of free space and total control

  I try to install photoshop elements 13, that I bought and downloaded from Amazon. When I try to install it I get the following error message: "this is a problem when extracting the files. Check the amount of space available on your computer and the rights to write to the destination folder. I administrar 1.38 TB of free space and total control.

  Charles please do not remove the installation files in the Program Files directory.  I recommend to extract the installation to your downloads folder or your desktop files.  Once installation files are extracted, you can then run the installation program to install Photoshop elements 13.

• HP pavilion zv6000 - digital media player problem

  My digitial medial player does not read our SD camera card even if the card can be read by a USB SD card reader. We have the same problem with our HP desktop computer digital media player.

  I have download all the updates that I can find for the AMD processor, windows XP Pro, and digital media player.

  We tried several different SD cards but all are bigger then 2 gig I think that's the problem.

  When inserted, the system (Windows XP Pro) simply does not recognize the card.

  Is their a patch of firmware for the digital media player, I'm missing?

  Unfortunately, the maps of more than 2 GB are actually SD - HC, no SD they look alike and have the same form factor, internally, they are quite different.  Although in some cases, an update of the firmware can update a card reader, it is usually not possible (or at least most of the manufacturers do not try), I suspect that your USB card reader is of a more recent vintage than readers integrated computer.

  Unfortunately, your choice is to continue to use the separate drive or stick on SD cards that are generally limited to 2 GB or less.

• 4.2.3/.4 data support assistant - slow when loading large files

  Hello

  I use the load data wizard to load csv files into an existing table. It works very well with small files up to a few thousand rows. When loading 20 k lines or more loading process becomes very slow. The table has a unique numeric column to the primary key.

  The primary key is declared to the "shared components"-> logic-> "data loading tables" and is recognized as 'pk (number)' with 'case sensitve' set to 'No '.

  When loading the data, these Setup executes the following query for each line:

  Select 1 "Klaus". "' PD_IF_CSV_ROW ' where upper ("PK") = upper(:uk_1)

  which can be found in v$ sql view during loading.

  It makes the process of slow loading because of the superior function, no index can be used.

  It seems that the setting of "case sensitive" is not rated.

  Removing the numeric index for the key primary and with the help of a function based index do not help.

  Explain plan shows an implicit conversion "to_char":

  UPPER (TO_CHAR (PK) = UPPER(:UK_1)

  It is missing in the request, but perhaps that it is necessary for the function based index to work.

  Please provide a solution or workaround to load data Wizard work with large files in a reasonable time.

  Best regards

  Klaus

  You must have the correspondence of PK to be "exactly - case-sensitive" (or something like that)

  In addition, I was already on the slowness with Oracle Support when dealing with important content.

  They are aware of the problem.  Only around is known to break up the data into smaller segments.

  (I'll have to track down the correct ID for reference...)

  My observation:

  APEX data loader makes a slow-by-slow transformation of the data instead of treatment in bulk.

  You will need to break up the data, or to build your own data loader.

  Thank you

  MK

• A problem when using Flash files with a browser

  Hello

  I have this weird problem when it comes to the use of flash in dreamweaver, whenever I use a flash file & after I test it on Both Firefox & IE browser), I get this weird border whenever I click on it, and here's a photo shows u what I mean...

  If all goes well. I'll take a few answers:

  Thanks in advance.

  Try adding the following (in red) to the style of the web page and see if it helps...

• can not sync music to any memory card in Windows Media Player due to the error Windows encountered a problem when synchronizing the file to the device.

  Original title: can not sync music to any Windows Media Player memory card

  This has not happened before, but now, whenever I want to sync music to any memory card, it does not work. It makes the whole process, and it did as it syncs, but at the end of that music just does not appear in the memory card. If I go to the status of the synchronization, all songs appear with a RED x next and it says that Windows has encountered a problem during the synchronization of the file to the device. How can I fix it? as I said before, this has not happened before.

  Hi UlloaC,

  See the steps mentioned in the link below that relates to a similar question

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.6001.7000&ID=C00D1236&ContextId=211&OriginalID=C00D1179

  See also the link below

  How can I fix sync errors?

• Problem when loading a large file

  Oracle 11.2.0 (11g) Windows Server 2008
  
  It is the first time with Oracle databases.
  We take Oracle courses but we are at the beginning.
  
  Today, we had a problem and we are trying to understand what happened.
  There is a text file with lines more than 3000000 to load the database.
  The user has started the procedure and everything was fine.
  More than 1000 rows were processed in less than 1 second.
  But suddenly the procedure stopped at line number 694092.
  There is no problem of space in storage and the procedure was running alone. This is the first file that we load, if everything was free.
  We thought it might be an automatic routine to Oracle db, so we leave the load routine the way it was just to see if it ends before Monday.
  We were not running anything else at this time. We have only the "suggested" as automatic routine Oracle backup, but the full backup will be only 10 hours right now. Our archivelog mode. The recover flash is also configured. But these configurations have been made 2 months ago. Maybe our redo log files were not clearly specified by the consultant who has installed the system here 3 months ago. We have 3 files .rdo with 50 MB each. Could be the problem?
  Does anyone have an idea?
  
  Eduardo

  Hello

  There are a few possibilities...

  1. lack of resources of your machine (can be identified via Enterprise Manager / Grid Control + Manager the performance of your Windows machine).

  2. an outdoor activity that stopped your loading process (can be identified via Enterprise Manager / Grid Control + Manager the performance of your Windows machine).

  3. some Oracle DB problem (can be identified from journal of the alerts/oracle/app/oracle/diag/rdbms/gtdb /track)

  4. some long DB Oracle wait event (can be identified via Enterprise Manager / Grid Control)

  5. some intensive resources Oracle on demand or tasks, for example, optimizer statistics (can be verified via Enterprise Manager - Central Planner).

  Good luck!

  ---------------
  http://DBA-star.blogspot.com/

• Photoshop crashes when loading the files to stack

  Hello

  When I try to load a stack, Ps load the sequence of jpg files, then freezes and goes to the start screen.

  I have compiled successfully a pile of these sequences of 300 + images previously (I just need to re - export an animated .gif updated).

  I tried to restart, execution of a disk cleanup, restarting after a period of time are done everything to nothing.

  If anyone has any ideas, I'd be really interested to hear!

  Thank you & all the best.

  Strangely, I've just been through the process of cleaning disc again and this time it seems to have solved the problem.

  Thanks for your help - I hope that this thread can be useful to someone else who has this problem.

• SG error when loading quicktime files

  Hey guys, could use help:

  I try to use the SpeedGrade class room in a book tutorial. I'm just in the first chapter. I open the project and get a timeline. I point the media browser to the folder, hit "over office' and calendar changes turns the blue.

  However, the thumbnails are grey white, and when I go to the "Color" tab I get the message "error opening file".

  The "Render" tab > others > Quicktime, I get the message "the Quicktime library could not be initialized. Please make sure that Quicktime 7 or later version is installed.

  I installed QuickTime v7.7.4 and can play the clips (with the extension .mov) without problem outside the SG.

  I am running this cloud Adobe Creative on an Intel i5 - 3570 k quad-core with 8 GB of RAM on a 64-bit Windows 7 system with a 1024 MB graphics card (older) Nvidia GeForce 9500 GT (version 327,23 driver. No new updates available.)

  I did some poking around in the forums here, but don't can't get an answer that works. The resolution, I have sous-échantillonnées. Adjust the size of the cache. Files deleted and started around, etc. Any help would be appreciated.

  Thank you!

  Long shot:

  1 - uninstall SG and ensure that preferences are trashed.

  2 reinstall QT

  3 reinstall SG