Printer says ink or printer system does not work

Similar Questions

• I can't print. It says local print spooler does not work, restart the printer or machine.

  I use windows7, I can't print. It says local print spooler does not work, restart the printer or machine. I can not install, or add the printer currently installed in my computer. Help, please.

  Original title: printer

  Hello

  The print spooler is the mechanism that will interface between your application and the printer and coils (sends) the print job to the printer. It should start automatically when you start your machine. So, restart your computer and try again. I suspect that the real problem is to find why the print spooler has stopped in the first place.

  After trying again, see what happens and if your print spooler stops again, the real work will begin.

  Kind regards

  BearPup

• Printer spooler does not work for a single user on the network printer

  original title: very different printer problem

  I have a HP deskjet printer shared from a PC on the network.
  I was informed of a single person could not access error poped by saying "printer spooler does not work.
  I went to the services and made sure it was infact running and rebooted to be sure also restarted the RPC services as it is addictive
  Still, the user cannot print to the printer. I took the computer that has been seen issues and hung where fixed my PC and I am able to connect and print!

  If I move my computer witch would allow me to print before there where his computer is my computer prompt same error

  My idea is - what some are how a network issue, but the user can still access drives network, internet and other printers on the network

  Just not this printer

  The computer on the share is is a windows xp sp2 workstation

  The computer with the issue is any system I plug its cable Ethernet (XP anyway) I have not tried with a windows machine 7.

  My hypothesis is a bad Ethernet cable? I'm quite lost with this question at this stage.

  My next step is to hang the printer until a print area and assign an IP address and finish with the share.

  (Still not sure if it would help or not)

  Any advice is welcome thanks

  It turned out to be a bad switch. I don't understand why it did not work. All the computers had no problems other than the present even that if I swapped the ports it has made a difference.

  Hung new switch and all computers works fine now.

• wired keyboard 600 print screen does not work

  System

  Windows XP Professional 32-bit version 2002 Service Pack 3

  Dell Vostro 400

  Intel Core 2 Duo E4500 2.19 Ghz, 3.00 GB Ram

  Since I replaced the original keyboard with Microsoft wired keyboard 600 print screen functions are sporadic at best.  Sometimes Ctrl + PRTSCN works and especially it's not.  Even when Ctrl + print screen does not work I can not copy the active window by using Alt + PRTSCN.   I have a Setup dual monitor at work so that I can have the database, file explorere and opened in a window screen and development in another email.  I tried to download the driver from the Microsoft Web site, but he says that drivers that are installed are later.  (installed on the disc that came with the keyboard)

  Other than to start Microsoft keyboard anyone elese have all the solutions to make it work?

  Hello

  Follow these methods.

  Method 1: Follow these steps to run the keyboard Diagnostics

  (a) start Microsoft Keyboard Diagnostics. To do this,
  Click Start, click run, type mskey in the Open box, and then click OK.

  (b) press several keys to verify that the keys match the keys identified in the MS Key window.

  (c) when you are finished, click exit.

  If you get no response in MS Key on your keyboard, test the keyboard on another computer

  Method 2: You can also use the on-screen keyboard and check if you are able to take screenshot.
  For more information, see this link.
  http://Windows.Microsoft.com/en-us/Windows-XP/Help/on-screen-keyboard    

  If the methods above do not help, you can contact the Microsoft Hardware support.
  How to contact Microsoft if you have questions about your hardware device
  http://www.Microsoft.com/hardware/en-us/support/contact-us

• Photosmart 7520: Printer Wizard does not work on Windows 10

  My PC has recently upgraded Windows 10.  I am now having a problem with the Printer Wizard.

  Previously, I had the status display, the ink levels, scan document, check printer heads, etc.

  Now all I get is a printer configuration screen that has 3 options

  -connect a new printer,

  -convert a USB printer wireless, and

  -Add new software.

  How can I get the correct printer assistant screen to run?

  Thank you.

  Hi @AJA3,

  Thanks for joining the Forums of HP Support for a solution to your problem of HP printer Assistant.

  I understand that you use a HP Photosmart 7520 e-all-in-one printer with a computer who has recently upgraded Windows 10 and now, when you click on the printer icon to open the HP printer Assistant you get the "connect a new printer"window. " I would like to help with that.

  It is not that the HP printer Assistant does not work, but probably the printer probable network needs to be reinstalled.

  I would like to start by uninstalling all software that was installed before the upgrade to Windows 10 relating to printers. Here is a support document which can help needed - uninstalling the software of the printer (Windows).

  If you get prompted to restart the computer when uninstalling, go ahead and do the restart. If this isn't the case, restart the computer after the uninstall is complete.

  Once the computer is ready, try to use the HP printer installation wizard for installation. This tool will find the most recent version of the printer software and installation help.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Canon mp530 printer/scanner does not work since the latest version of windows update

  from the windows of the last update my printer scanner does not work. He says I have no installed printer. even if its there in my device list. Ive spoke at length with Canon support and they are sure it's a matter of windows.

  any ideas?

  Hello

  After windows update did you check in Device Manager is there any yellow mark on any driver?

  Go to the device by right clicking on computer Manager and manage

  Right click on the yellow camera brand > properties > details > click on description of the device > select hardware ID

  Let windows to be opened and take note of the VEN ID and DEV ID

  Go to the browser and go to Pcidatabase and put the VEN ID and see who exactly the driver required

  Look for the driver at Google or bing or other for a good

• my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  He ran once before, one of my suggestions of solution was the coil (?)  was incorrectly, but don't know how to adjust it

  Hello
  (1) have you made changes before the start of this issue?
  (2) what is the exact error message/code?
  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Additional reference:
  Open printer troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Let us know if that helps.

• Add-on for Print Edit does not work

  I just got my iMac cleaned for adware and now my add-on for print edit does not work. There is an error 2 - XPF to the catalog. I don't know the email address of support for developers?

  Hello

  Did you mean this extension:

  • https://addons.Mozilla.org/en-us/Firefox/addon/print-edit/

  The contact details are on the right side of the page, next to the section 'on this add-on.

• 29,0 Firefox, print 'selection' does not work.

  When I select a section of a page, then use the "print" button, the 'selection' print option does not work. It is not highlighted in the print menu.

  The button "print" 'action' in Firefox 29 differs from earlier versions. Now, he opens preview print rather than going directly to the box of "native print dialog. That breaks the ability to print a 'selection '.

  My advice is to highlight the selection , then use {Ctrl + P} to start printing until Mozilla fixes the action of the "print" button in a newer version of Firefox.

• Printer Hp5510 crashed. Software removal - tried reinstalling. Cannot install printer Message "print spooler does not work - what's up."

  Hi all

  Need help

  Hp5510 locked

  I works fine when connected to my laptop - but-not when it is connected to Compaq Presario desktop mu

  Software removal - tried reinstalling. Failed to install.  printer Message "print spooler does not work - what's up."

  ↑ hanks

  Scott

  Consult HP printer experts found in the HP printer Forum.

• Is it posible to get an older version of photoshop? because to install photoshop CC he says that my operating system does not support

  Is it posible to get an older version of photoshop? because to install photoshop CC he says that my operating system does not support

  If you use Windows XP / Vista or Mac OS X 10.6.8

  You must install Adobe Application Manager , to help you install CS Photoshop version 6.

  Windows: After installation, creates the shortcut on the desktop.

  http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe

  Mac: After installation, created the launch within the Applications folder icon.

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

• sound system does not work. Booth option no longer available.

  I have HP Pavilion dv 1000. After formatting the laptop, sound system does not work. I hear no noise; standby and hibernate options are no longer available. Please help me.

  Hello

  Nazia2011 wrote:
  I was getting a blue screen that says technical fault, look for the BIOS. Disable the BIOS memory options such as implementing caching or shading. I also received this message: a malfunction of the equipment. NMI: Parity check/Memory Parity error. The system is shut down. I spoke with HP technical team, they helped me. However, they said that this laptop model is not supported in India. Material was found OK after free hard drive test. Then they asked me to run the operating system cd, I did. While working CD, formatting option, I did gave me. Since computer laptop works very well, but the problem with the sound system. Support optionally visible round but only off and restart works. Hibernate also unavailable. Serial number is CNF54727DN

  Audio drivers must be placed on the second disc of the entire recovery. Give me the serial number instead of the name/number of all important product is no help at all for me.  If you are not going to help me help you then... I'm sorry.

  Others ask for help and they have no problem reading and give the necessary information

  Best regards
  ERICO

• Sound system does not work

  Original title: I have Windows XP and a sound system that does not work

  Everything is present in my sound system, don't except for one thing... no audio devices installed.  How do I get this audio device installed,
  so that it works again?

  Hi Jack,
   
  Thanks for the post. I understand that your sound system does not work on your computer.
  
  I imagine the inconvenience that you are experiencing. I will definitely help you with this.
   
  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:
   
  1 have you ever done any recent hardware or exchange of software on your computer before the show?
  2. What is the brand and model of the computer?
  
  Please follow the steps below and check if that helps.
   
  Method 1:
   
  No sound in Windows:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02
   
  Method 2:
   
  I suggest you to update the audio drivers by following the steps from the link below:
   
  How to update a sound card driver in Windows Vista and Windows XP:

  http://support.Microsoft.com/kb/166774

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• How to find on which device connected to my system does not work?

  I have XP Professional.  Cannot start Windows Driver Foundation-User Mode Driver Framework(Manages user-mode driver host processes.)  In the window 'services.msc' and try to start Windows Driver Foundation, I get the message: "error 31 - failed to start service. A device attached to the system does not work. "Question: how to find on which device connected to my system does not work?

  1. click on start and then click Run.
  2 type devmgmt.msc in the run box and press ENTER. This will open your device manager.
  3. in the Device Manager window, click view, and then click Show hidden devices
  4. develop options in your device manager and see if there are any device with a yellow exclamation point or something that is rare. If you find one, you can uninstall and reinstall the driver for this device, as long as you have the installation for device drivers files.

  I hope that helps!

• When I want to install express inte intaler then he said that he failefk to install it. Why and my sound system does not work.

  My sound system does not work. my sound card on the motherboard is damaged then I bought a new and it worked fine then when I reinstalled xp wasn't working the audio device. What can I do now?

  Hello

  ·         You get an error code?

  ·         What is the brand and model of the computer?

  ·         What is the brand and model of the sound card?

  ·         Using Intel motherboard?

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  You can also check this link for Intel Express installer fails to start and check if it helps.

  http://www.Intel.com/support/motherboards/desktop/sb/CS-014565.htm