Digital text

Similar Questions

• Background color of digital text on a digital element to a cluster.

  How to change the background color of digital text (NumText.BGColor property) on a digital element to a cluster?

  I see the property when a digital is autonomous, but do not see it when it is within a cluster.

  Just right click on the control inside the cluster and the property node create and select your property.

• Why a normal digital text read like a phone number on my site only when the display on the phone or Tablet?

  Hey everybody.

  I'm working on a website and have an ABN followed of the digital text however it does not read as text on a phone or a tablet. In fact, numbers are invisible and when you click it then numbers and calling area is triggered.

  How can I fix this please.

  Help.

  Double post of why a normal digital text reads like a phone number on my site only when the display on the phone or Tablet?

• How can I add drop shadow to the digitized text handwritten?

  I wrote by hand and scanned a text, open in Photoshop CS6 and reversed tones to create white letters on a black background.  I made this file in Avid Media Composer and it superimposed on an image using a luma key to key on black.  Now, I want to add a small drop shadow to the text to make it more readable when it is bunk.  How can I do this in Photoshop before importing the file in Media Composer?  I realize I have to use an alpha channel, rather than a luma key, in this case, but I have no idea how to do to create the PS file with shadows on the letters.  I think I can learn the procedure to make a layer alpha from online sources.  I would be grateful for any guidance.

  Without having seen the digitized text I am not sure that the following technique is appropriate. That said, consider this approach, assuming that the scanned manuscript text is on white paper:

  1. open the file. The text is the background layer

  2 stir its background lock in the trash

  3 hold down the command key and click the new layer at the bottom of the layers panel. He will place a white layer under the text layer.

  4. the background layer is layer 0.  Select layer 0.

  5 double-click the layer color 0 in the layers panel to get the layer Style menu area

  6 down below is the "Mix" box if are two gray scales. Move the slider to the right of the grey scale top of the page toward the left and the White Book of your scanned text layer will become transparent. Click OK.

  

  7 Cmd + E to combine the layer

  8. at this point, you can place a layer below your text layer. Edition > fill with white.

  9, return the text layer and - once more the use of the layer-Layer Style - apply the drop shadow. (Clicking the shadow option will provide additional controls.)

• copies of digitized text

  Using Windows 7 and HP Officejet 6700 premium printer. When I scan a document to PDF it comes out OK, but if I scan it as a text document (daily analysis) that part of the document shown on the left side.

  Could you post an example of what you describe?  I want to assure you that I know not what happens before I made you a lot.

• Convert number 1 hexadecimal byte into digital text

  This should be simple, but the answer escapes me so far.

  The problem is that I am building a string of ASCII characters to send over a serial connection. The manufacturer uses a XOR checksum, resulting in a 1 byte number that needs to be appended to the ASCII string. And here's the catch, it must be exactly the number so if the checksum = 73, so they expect a string as such: (SVF, 10.0) 73 (I hope I put the value of correct checksum for the internal string between (()). It cannot be the hexadecimal value or equivalent ASCII, must be the number as text. Here's another one: (NUC) 58

  My check generates the correct values that I compared against example of manufacturers and C++ code of another person who worked with equipment for another project, but I didn't understand but how to make the value number ending up as text.

  Any suggestions?

  -Bill

  Hello NGC3123,

  I think what you are looking for is the function of the Value of Format . This should allow you to add your integer to string according to all required format you have.

  Kind regards

• I received the welcome email said I could "make editable digital text."

  What means exactly and how can I do?

  Hi editing scanned text.

  When you use ExportPDF, it automatically does optical recognition of characters (OCR). The conversion of the OCR process is scanned the text editable text. You cannot disable OCR if you convert via the ExportPDF site, but it can be disabled if you convert the drive. So, if you want to convert by the reader will find that OCR is not current, please consult this document to ensure that OCR is activated: How to disable the optical character recognition (O... |) Adobe Community

  Best,

  Sara

• Display a field of digital text if the enabled checkbox

  How I would go about setting up a check box so that when the box is checked, a separate text form field appears and the separate text form field also displays a specific number. And, if the box is unchecked, the same separate text form field is hidden and does not have any number show?

  As the mouse in the action box, use this code:

  var f = this.getField ("OtherField");

  If {(event.target.value=="Off)"}

  f.Display = display.hidden;

  f.Value = "";

  } else {}

  f.Display = display.visible;

  f.Value = "123";

  }

• How to add color to a digitized text TIFF image?

  The scanner has delivered a grayscale file, then perhaps that mode must be changed to CMYK in PS6. I did it.

  And the file provided with just a background with no other layer. Perhaps may not be color horizons? I tried to change/add a layer and setting the backround on it in blue. It has no effect on the image which remains black on white.

  Ideally, the text would be like a mask on a layer of color. But a readable with colors result would be nice.

  Click on layer 1 to target. Then go to edit > fill and choose your color. Set its blending Mode to multiply.

  (Kendall and OldBob describe a slightly different method - with the color behind the text layer. In your case, anyway works.)

  

• The analysis of digital text in digital value chain

  If I have the number '5' as a text layer, how can I get another layer of text to read that number and then add another number?

  It gives me '56 '. I want to "11".

  Temp = thisComp.layer("5").text.sourceText.value;

  (temp + 6)

  It should work.

  txt = thisComp.layer("5").text.sourceText;

  Numbers = 3;

  n = parseInt (txt) + 6;

  s = n.toString ();

  While (s.length< numdigits)="" s="0" +="">

  Dan

• Format digital exponential WPF NumericTextBoxDouble FontSize and AxisDouble

  Hello!

  1.) how can I change the font size of NumericTextBoxDouble?

  I use this code:

  but the font size remains about 10-12 pixels.

  Why?

  2.) how can I disable digital scientific (exponential) format of the AxisDouble on the chart in WPF?

  Kind regards

  Tamas

  P.S.: I use VisualStudio community of 2013 and 2015 MS Standard

  (1) FontSize is the correct property. You have an implicit style for TextBox which is the substitution of the font size? For example, if I add " " for resources in a test window, which substitutes the font setting on the digital text box.

  (2) you can control the format of the labels division thanks to the LabelPresenter property on the MajorDivisions of the axis. For example, using " " will display the division labels using the fixed-point string of Format Standard Digital.

• Digital display of the LabVIEW Control gauge

  I created a gauge control to emulate a rose compass as suggested by other posts. I filled the control with 0, 30, 60, etc. to 330 and left blank for the last entry as 360 parameter overwrites the entry 0. I chose 'Allow Undefined values' and everything works as required on the development system, click on the 30 '30' poster text entry area, use the text input Select box and a separate digital text box opens to allow something like 15 to affix, which then appears on the display bracketing <15>as described in the help of LabVIEW the digital extra text box then disappears.

  When I built the system and install it on the target computer, this last action does not occur. The digital extra text box remains in view of the Panel, while I have two displayed values. This extra box remains on the screen even if a value is selected via the mouse. What's not?

  
  

• You can change the height of a digital indicator in LabVIEW 2010?

  It seems that you could have is LV 7.1 such that referenced by this article:

  http://digital.NI.com/public.nsf/allkb/AFCA584E0A70774586256E970052AFC3

  However, I also found that in 8.5 you apparently cannot resize the height of the indicator/control... as they can get rid of the property of digital text node.

  Any ideas if this is possible?  Thank you.

  Erik

  I figured this out, the property node referred to by the guide 7.1 is only visible on the front panel when right-clicking on the item itself (and not all of the control).

• Export of data from text to MicroSoft Acess via SQLExec

  I was able to export numberical data in a Microsoft Access (mdb) database.  However, I have problems of export of text from a datamember data.  I use the SQLExec object to achieve this.

  Here is the general syntax of SQLExec I put in place for the text values:

  "INSERT INTO test (column1) VALUES('"&(text(\\.\Process1\TEXTENTRY.value,"0")& "')

  The value of the datamember TEXTENTRY will matter in the mdb file, column1 if it is digital.  Not if it is alpha-numeric.  The column is implemented for the text format.

  However, I am unable to import 'fixed' characters (not datamember text) to the database that is to say:

  "INSERT INTO test VALUES ('hello') (column1) the result is Hello will be in Column1.

  Please notify.

  Thank you!

  The text() function converts the digital text, so you do not need.

  Try the VALUE ('"' & TEXTENTRY &" ' ")

• the value of the digital inputs to change the field

  Hi all

  I have an edit field that has a digital text filter that only accepts phone numbers. Users have the choice to load these numbers from address book or direct entry.

  I used the digital filter to allow only numbers. .

  But when I tried to load these address book.  with editField.setText (phoneNum); It is to throw IllegalArgumentException.

  How to set digital inputs to the editField?

  Hi thanks for all your entries!

  My issued are resolved. I used BasicEditField aulieude EditField to solve this problem. the basicedit field allows the digital text and it solved the problem.

  Thanks for all your interest...