The analysis of digital text in digital value chain

Similar Questions

• The sum of several text boxes that are greater than 1

  Hello

  Relatively new to javascript and need to get a script that calculates the sum of the ten boxes of text with a value higher than 1.

  I have a script for counting, I'm not sure how to do the sum. Script is below.

  I'm sure it's pretty simple, but I'm not versed in this right now.

  var total = 0;

  for (var i = 1; i < = 10; i ++) {}

  If (Number (this.getField("Text"+i).valueAsString) > 1) total ++;

  }

  Total = Event.Value;

  Any help would be appreciated.

  It summarizes a number of fields by simply adding the value of the field to the variable used to accumulate the numerical values of the fields to be summarized...

  var total = 0;

  for (var i = 1; i)<= 10;="" i++)="">

  If (this.getField("Text"_+_i).value > 1) total = total + Number (this.getField("Text"_+_i).value).

  }

  Total = Event.Value;

• The analysis of shape Bonehead question

  Sorry for the stupid question, but I cannot understand how this code... my problem is how to get to name/value pairs in the form submitted.
  
  Its update shopping cart function.
  
  The form has a series of fields created like this:
  < input type = "text" name = "" #key # "value =" #VARIABLES.cart [key] # ">"
  
  The name attribute is a product SKU number; the value attribute is the quantity in the order.
  
  Easy so far... I get a series of input fields that look like this in the HTML:
  
  < input type = "text" name = "300" value = "1" >
  < input type = "text" name = "700" value = "5" >
  
  My problem is to access the values of the name/value pair.
  
  I can loop through the names of the fields like this:
  
  < cfloop list = '#FORM. "FieldNames # ' index 'i' = >
  < cfoutput > #i # < / cfoutput >
  < / cfloop >
  
  Which would produce:
  300 700
  
  How to refer to values from the name/value pair?
  
  I tried:
  
  < cfloop list = '#FORM. "FieldNames # ' index 'i' = >
  #FORM.i # < cfoutput > < / cfoutput >
  < / cfloop >
  
  But that isn't it.
  
  Am I missing something very basic, but it can't know.

  Thank you very much, Bob, which works very well. I never thought as myself.

  For posterity, here's a version slightly changed after the test:
  
  
  
  
  
  Key: #variables.mykey #.
  Value: #myvalue #.
  
  
  

• text of the file of digital data in columns (spaces between the columns) to the chart with an average every 500 columns values.please help.

  I have a text file with numeric data in three columns, (I need to spend the few lines of text in the file above the three columns of values of data first) then I need to convert numeric values above-"999" to zero, then take the average of each value of 500 in the first column (second and third colum requires the same operation separately) , so found average values should be stored in a text file and finally plotted in a graph separately. Help, please. Its part of my project work.

  Another version, simply drag and drop:

  

• How to get the values of phase of the harmonic component digitally?

  Hello

  Basically, what I'm trying to do is to analyze the quality of acquired signals. What interests me are amplitude and phase at some frequencies (for example 50 Hz, 150 Hz, 250 Hz, etc.) of a waveform. I tried to use "measurment spectral express VI' to achieve my goals. It works well, but so far, I can handle only show spectra in graphics. Then, I tried to use "harmonic distortion Vi' to obtain the amplitudes of harmonic components digitally and it's absolutely perfect. My question is that how can I get the phase of the harmonic components digitally?

  Thank you very much

  Hao

  FFT and a manipulation of the results seems to work quite well.

  I used some tones and noise Waveform.vi to generate a test signal. .Vi (Mag Phase) FFT spectrum analysis the signal. I find the amplitude peaks and extract the phases in these places. Results are quite close to the entrance of the values even when the noise is larger than some of the harmonics.

  Lynn

• I am trying to edit music digitized using Adobe Acrobat DC on a Lenovo tablet, Windows 7 operating system.  Adobe Acrobat DC rejects the analysis as unchangeable.  I export to a word document and re-export to AADC in pdf format.  It will then allow to cul

  Hello.  I'm currently editing digital music pdf using Adobe Acrobat DC on a Lenovo tablet with Windows 7 operating system.  Adobe Acrobat rejects the analysis as unchangeable.  I export the scanned pdf to MS Word and re-export to AADC in pdf format.  This can be cropped, but the edit function does not allow the movement of the measures (or 'skin measures text') within a team.  I am producing pages with 3 litters per page and 3 measures by staff who can be sufficiently enlarged to a blind musician.  My failure to change the measures so far means there is too much information by page and the page can be expanded properly. Advice please.  Thank you.  Charles.

  This is well beyond what Acrobat is intended - not just a little far, but a lot. PDF is therefore completely inappropriate for this.

  Address bits scan and cutting/organizing her before making a PDF. Maybe in Photoshop.

• How to pass data to the tables according to the value of the first 4 digits of 7 strings of numbers

  I want to sort incoming data, in several bays based only on the first 4 digits of each string.

  For example, a hexadecimal string may be 41322033333533 which is A1 3353.

  A1 is a sensor. particularly, and I want to send all data from the A1 to a table. I have 8 sensors data and want to send the data to separate the bays of sensor. My sensor names are A1, A2, A3, T1, T2, T3, W1

  I will use a structure of the matter, for loop and a comparison of '=' for the data. However, I want to only compare the first 4 digits of the string and I can't find an operator for this. Any advice on how to proceed would be appreciated.

  With a thread like this

  

• wait and trigger the first incoming digital dashboard

  Maybe it's a frequently asked question, but I managed to understand the trigger DAQmx VI. Is the trigger VI supposed to block the program until Gets an edge? It waits indefinitely?

  A screenshot of my failed attempt is attached to this message. I want to start my measurement (HAVE several channels) to the first incoming digital edge (or increment of the counter) on a system time real PXI. Before entering the loop of measure I want to wait for an edge (possibly indefinitely). Inside this loop, I want to begin to acquire the data values and counter of I.

  I even tried to use the example, but I get an error of dialog (see screenshot).

  Hello pgraebel,

  The trigger VI just configures the behavior of the acquisition.  So, once the start VI task is called, the task itself will be armed and waiting for the trigger.  You trigger attempt.jpg, what will happen is that the task is configured and started.  When starting, running VI will proceed to the loop where you call the read I.  The map will wait for relaxation, with no sample being acquired until the material sees the trigger.  If the trigger is never sent, the loop will iterate that you have not the VI wait indefinitely, but only for 10 seconds.  Thus, if no data is received, the loop will iterate every 10 seconds. If you want to read to wait indefinitely, the value of the timeout on DAQmx Read.vi-1.

  All that being said, it is not quite clear what is the problem with your attempt to trigger - everything looks good to me; are you an error?  Or the just VI hang up (which could be due to the fact that the relaxation is never received)?

  Let me know if it helps.

  Cheers, Matt

• How to make the transition to digital in 10g

  Hi all
  
  
  We have 10g database of primary and standby, I have never worked before sleep, customer wants me start switch, can you please let me know how to make the transition to digital in 10g.
  
  
  Thank you very much.

  It's the way I'm following passage in the
  ------------------------------------------------------------

  (1) check that there is no active users connected to databases.
  (2) select message from v$ dataguard_status;
  (3) select protection_mode from database v$.

  Step 1 check if it is possible to perform a failover.

  SQL > select database_role, db_unique_name, SWITCHOVER_STATUS, v database name $;

  DATABASE_ROLE DB_UNIQUE_NAME SWITCHOVER_STATUS NAME
  ---------------- ------------------------------ -------------------- ---------
  PRIMARY OFMSREGT_SIM UNAUTHORIZED OFMSREGT

  SQL >

  If you get NO allow status for SWITCHOVER_STATUS, verify that the standby database is connectivity.

  If the SWITCHOVER_STATUS column displays ACTIVE SESSIONS, you can successfully achieve a failover by adding the WITH clause LOGOFF to the statement ALTER DATABASE COMMETTRE through PHYSICAL standby

  Step 2 open the passage on the primary database.

  SQL > SHUTDOWN IMMEDIATE;
  SQL > STARTUP MOUNT;
  SQL > ALTER DATABASE COMMIT TO SWITCH STANDBY MODE PHYSICAL;

  Step 4, check the transition state in the view V$ DATABASE.

  SQL > SELECT SWITCHOVER_STATUS FROM V$ DATABASE;
  SWITCHOVER_STATUS
  -----------------
  TO_PRIMARY
  1 selected line

  Step 5 place yourself in the role of physical standby database target the main role.

  You can switch a standby database physical role ensures the primary role
  When the standby database instance is mounted mode redo apply or open
  for read-only access

  SQL > ALTER DATABASE COMMIT AT THE GRADE CROSSING;

  Step 6 complete the transition of the database ensures the main role.

  If the physical standby database has not been opened in read-only mode since the
  the last time it was started, run the SQL ALTER DATABASE OPEN to open
  the new primary database:

  SQL > ALTER DATABASE OPEN;

  If the physical database was opened read only since the last
  time it was launched, you must close the database waiting for target and restart:

  SQL > SHUTDOWN IMMEDIATE;
  SQL > STARTUP;

  Note: There is no need to close and restart other bases before (not involved in the digital switchover) who are online at the time of the failover. These databases on hold will continue to
  function normally once the failover is completed.

  Step 7 if necessary, restart log apply services on standby databases.
  He must deliver the command FRO repeat apply as:
  SQL > change database recovery managed standby database disconnect from the session.
  or
  And stop repeating applies to give
  SQL > alter database recover managed standby database cancel;

  Step 3 Shut down and restart the former primary instance.

  SQL > SELECT OPEN_MODE FROM V$ DATABASE;

  Step 9 check the synchronization between the primary and standby:

  Primary
  SQL > select thread #, max(sequence#) in v$ archived_log where archived = 'YES' group by thread #;

  Sleep mode
  SQL > select thread #, max(sequence#) in v$ archived_log in case of application = 'YES' group by thread #;

  Stop the former primary instance and restart and mount the database:

  Sense of SWITCHOVER_STATUS
  --------------------------------------------
  The column SWITCHOVER_STATUS of v$ database can have the following values:

  NOT ALLOWED - this is a database of pending and the primary database has
  not been first switched, or it's a back-end database and there is no data pending.

  ACTIVE SESSIONS - indicates that there are active sessions of SQL attached to
  the primary database or emergency that must be disconnected before the
  failover operation is allowed.

  Transition to THE PENDING - this is a database of relief and the primary database
  application of the digital switchover has been received but untreated.

  LATENT pass - the digital switchover has been waiting mode, but has not completed
  and I went back to the primary database.

  Primary SCHOOL - this is a database of pending, any sessions active, i.e.
  allows to switch to a primary database.

  In STANDBY mode - this is a primary database, any sessions active, i.e.
  allows to switch to a standby database.

  RECOVERY NEEDED - this is a database of pending that has not received the
  application of the digital switchover.

• How to filter the list of digital certificates for signing PDF

  Is it possible to change the configuration of the installation of the reader to filter the list of installed certificates that can be used to digitally sign documents?

  The filtered list is displayed when users try to select a certificate to digitally sign a document.

  Thank you.

  Hi Carla,.

  Unfortunately, Extended Key use is not one of the properties that you can apply.

  The things that you can set are:

  • appearanceFilter (i.e. to force the use of a custom signature appearance)
  • certspec (that is, the signing certificate must meet certain specific criteria)<----- this="" is="" what="" you="" are="" more="" interested="" in,="" more="">
  • digestMethod (i.e. to force the use of a specific cryptographic hash algorithm)
  • filter (i.e. to force the use of a specific security manager if you want to use something other than the one integrated in Acrobat)
  • legalAttestations (i.e. apply the motive or object of certification of signature)
  • Lockdocument (i.e. apply other changes to the document, after the signature is appended)
  • CDM (i.e. the rules for changing the document applied as part of a certification signature)
  • reasons (i.e. a list of one or more patterns signatory may use, in contrast to adding their own)
  • shouldAddRevInfo (i.e. to force the inclusion on the revocation (CRL or OCSP response) information in the PDF file)
  • subfilter (i.e. to require the use of a specific signature format. It's very mysterious)
  • timeStampspec (i.e. to require the use of a specific timestamp server)
  • version (ie the minimum version of Acrobat that can decrypt the signature. the only two options are to versions 6 or 8)

  The second element is the certspec, and that's what I was pointing you to. In the sake of discussion, think about what you can read in a certificate as an extension. The serial number is an extension, the subject is an extension, the valid date is an extension, etc. When a certificate is created, some of these extensions are necessary, other optional and you can even add an extension that are not publicly defined, and only you will know everything.

  Acrobat is able to enforce the signer to use a certificate that contains some, but not all known extensions. The extensions, it can enforce are:

  • Transmitter (i.e. to require the use of a certificate that is issued by a specific certification authority)
  • keyUsage (i.e. require the signatory certificate contain one or more of the nine possible values that can be included)
  • OID (i.e. requiring the certificate policy extension contains a specific value)
  • topic (i.e. require that the document is signed by a specific person using a digital ID specific)
  • subjectDN (i.e. require that the document is signed by a specific person, but they get to choose what your digital ID to use)
  • URL (i.e. If a required digital ID is not available, where the signatory can find an acceptable digital identification)
  • urlType (i.e. If the user is directed to the URL, there a web server where they can download a digital ID or a remote server of signature where the digital identification remains on the remote server)

  That's all. If she isn't one of these elements, then Acrobat is unable to argue that the article is available. Advanced use of the key is not on the list.

  Steve

• I'm currently developing the feature keys on my MacBook. In the process, he asked that I enter a code sent by message to a phone number (only the 2 last digits are revealed) that I do not have access to.   How can I fill the activation?

  I'm currently developing the feature keys on my MacBook. In the process, he asked that I enter a code sent by message to a phone number (only the 2 last digits are revealed) that I do not have access to.   How can I fill the activation?

  See "change how the new features can be approved" here:

  OS X Yosemite: Configure iCloud keychain

  As you can see, this allows you to change the phone number.

• iPhone5 only showing the first 8 digits of the wi - fi address

  Address wi - fi is only showing the first 8 digits, then... How do I access the other 4?  Even when I turn the phone on its side for more space it does not when you view the settings screen.  I try to connect to a secure wireless network and may not without the entire address.  Any help appreciated.

  I go in settings/general/to say and it displays all my WiFi address. Yours does not work?

• How can I get the COMPLETE serial number to display? This number shows except for the 4 last digits.

  How can I get the COMPLETE serial number to display? This number shows except for the 4 last digits.

  Hi Infogoddess,

  Thank you for using communities Support from Apple! If you try to find the serial number of your iPod touch or another Apple product, you can find information and the steps in the following articles useful:

  iPod: how to find the serial number - Apple Support

  Find the serial number of your Apple - Apple Support product

  See you soon

• Instant ink: ruined the last 4 digits of my instant ink trial code.

  Hello

  I bought a HP Envy 5530 printer that came with a free trial of two months of instant ink system. While scraping off the coast to reveal the code, I accidentally damaged the last 4 digits of the series of 16 digits.

  Is there a way I can get a replacement for it / get to know the last 4 digits?

  Thank you

  Stefan

  Hey @_Stefan,.

  Welcome to the Forum from HP Support.

  I see that you are looking to complete the configuration of your instant ink after having a problem with the registration card. Do not worry - what is happening and there is an easy solution. I would like to help.

  Your fastest path to resolution of reaching out to our cloud support team. You can click on the following link to start a business:

  https://support.HP.com/us-en/contact-HP/product/HP-Instant-ink-series/5264756/model/5401249#Z7_3054ICK0KGTE30AQO5O3KA30F3

  Once you complete the form online to build your business, you can choose among different ways to contact direct. Let me know if you are able to finish your sign. If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the "Thumbs Up" icon below by clicking on "Accept as Solution" (this will help others find the solution).

  Thanks for posting in the Forum from HP Support.

  Have a great day!

• SMU-6556 - how to control the rise in digital lines (hsdio) time

  Hello

  Is it possible to control the rise in digital lines SMU-6556 time?

  Even in a low frequency 10 kHz signal rise time is 2ns.

  TKS,

  Hello engfpe,

  The SMU-6556 is a 50 Ohm system, which means that the output is source series finished to be 50 Ohms and all our cables and accessories are 50 Ohms.  With this configuration, regardless of the flow of data, you should have a clean edge up or down, regardless of the data rate. The quality of the production (edge up or down) on your device is related to the adaptation of impedance of your cables.

  The SMU-6556 cannot adjust the speed of scanning by itself.  However, you can insert simple passive components to do it for you.  I have attached below the images.  The first is a diagram showing a way to slow down the edge.  The second is the a waveform simulation showing the rate of original edge before it slows down and the edge of idle.   This simulation is not the SMU-6556 but rather a generic digital output for concept.  In the schema that R1 is set on 34 Ohms because U1.8 has the 16 additional Ohms on the inside.  TL1 is the output of 50 ohms simulating the cable on the SMU-6556.  R2, R3, and C1 are components, you can insert after the SMU-6556 twist before moving your device/cable.  In this configuration from cable to your device is TL2 which is also 50 ohm, but it could be another impedance in which case you would change R3 to match.

  You can see in the attached images, you can slow down significantly the edge with this configuration by altering the C1.  I hope this helps.