Dimension 4700 won't CD-ROM drive boot

Similar Questions

• iMac G5 won't internal hard drive boot

  Hello

  I am a student at a vocational school student IST. The faculty member sent us old iMac G5 17 inch to set ourselves. After the repair of the motherboard, we had to install OS X 10.5 installation DVD, because the customer had erased his record for security purposes. However, the internal disk drive would not work, so we had to set the Open Firmware mode and start from a normal PC hard drive connected via a SATA-USB adapter cable. We got the OS installed and restart clicked on Setup, but the splash screen always appears as a folder missing OS. We tried to go into Open Firmware and setting the device on the hard disk, but it wouldn't boot. Other things we tried:

  -Hold the "D" key on startup to force it to boot from the internal hard drive, but it could not start

  -Optionally now to go to the menu boot device menu boot device froze after a few seconds

  -Insert the 10.5 installation disc in our external DVD drive (as mentioned above) and launch the disk utility > startup disk to restart the iMac and the start of the internal player, but same result as previously (missing the OS icon)

  At this point, both students that the instructor are almost of ideas, and I thought that post on the forums to see if there is anything else we can try before you buy another drive and charge the customer.

  Thank you in advance!

  Disk utility to partition and format the drive.

  Boot from the installation disc:

  Booting from an OS X install disc

  1. Insert the OS X installation disc into the optical drive.

  2 restart the computer.

  3. immediately after the ring, press and hold the C"" key.

  4 release the button when the spinning gear under the Apple grey dark

  logo appears.

  5. wait for the installer to finish loading.

  Once the installation program is loaded, select the country and click on the continue button. Wait for the menu bar of the screen to appear. Select utility drive in the Utilities menu. On the left should be a list of mounted drives. Select the entry of out-bumpy drive to the HARD disk (usually, watch mfgr. name and size or model number.) Click the Partition tab in the main window. Select 1 partition from the menu drop-down Partition scheme. Set the type of Format for Mac OS Extended journaled. Click on the apply button and wait for it to finish.

  At the end of player preparation, you can quit disk utility and return to the installer. Proceed with the installation of Mac OS X by following the instructions.

  If any of these categories can be completed due to HARD drive problems, then most likely the drive is dead. G5 models use standard 3.5 "SATA drives, I recall.

• 8300 elite SFF: 8300 Elite won't USB flash drive boot

  Elite Mini PC 8300.  I made a bootable USB key but cannot get the Menu of boot or boot order configuration in the BIOS to see the player.  Exactly the same as in this other thread pending: USB not available in the Start Menu

  In 'Device Configuration' (BIOS) is listed, it does NOT appear in the Boot configuration order, even if I save changes and reboot.  I have disabled UEFI and Secure Boot, activated Legacy BIOS, I intend to install Windows 7 x 64.  When starting I press F9 or ESC to display the start menu and the USB key is not listed.  All USB ports are enabled.  Tried the ports front and rear (except USB 3.0 those W7 with no support from the other drivers for USB 3.0).  I tried he prepares with Microsoft USB DVD Tool and Rufus.

  The flash player has worked well with several other PCs.  for example I have HP Pro 4300 SFF and the flash player starts without a problem here it is configurable in BIOS and select from the Start Menu.

  First attempts on Elite 8300 was with BIOS v2.99.  But I also tried after update BIOS to v3.03 because release notes made remarks on improving support USB, but there was No change even problem.

  Take the battery CMOS press switch reset CMOS on the systemboard put the CMOS battery, restart the device to fix a date and time in the BIOS and check if this is useful.

• After my Dell Dimension 4700, repair the sound currency - driver for multimedia audio controller not installed.

  I need help for sound on my desktop back.  Help, please

  Hi LillyIversen,
   
  Download the Audio drivers from the following link:
   
  Dell support

  You can also follow this step to install the drivers:

  a. double-click the type of device you want to update or change.

  b. right click on the device driver specific, you want to update or change.

  c. click put to update driver to open the Hardware Update Wizard. Follow the instructions in the wizard.

  More information on:

  How to manage devices in Windows XP

• Equium A100 PSAA43: CD rom drive won't boot from any CD

  Hello.

  I have a problem with the start on equium a100-psaa43 procedure.
  The problem is the cdrom won't boot any cd
  I mean recowery system or any other cd boot as a Live CD.

  My BIOS version 1.5
  I put in place a correct sequence in the bios Setup. I mean 1. Secondly, CD-ROM, is my hard drive.

  What can I do to fix this?

  Thank you.

  Hello

  First of all we should know if the CD rom drive can read any CD.
  Have you tried to read from the Windows OS CD? The operating system recognizes the CD inserted?

  If not, then possibly the ODD drive malfunctions and, therefore, it s not possible to start from the middle.

  Anyway, you can boo from the CD in different ways. First, you can press F12 and you will get a boot menu. There, you can choose bootable devices.
  In the second way, you can try to press the C key immediately after starting the laptop. This button starts the CD player.

• Dimension 4700 dvd - rom & dvd +-RW nor working

  I'm not either of my dvd to work on my dimension 4700 players.  When I look in Device Manager, there a yellow circle with a black exclamation point next to each of the disks.  The first is HL-DT-ST DVD - ROM GDR8163B and the second is PHILIPS DVD +-RW DVD8631.  When I click on them they both say "Windows cannot load the driver for this hardware device.  The driver may be corrupted or missing. (Code 39) ».  The use of the device is turned on.  I tried to uninstall and reinstall but still the same thing.  I tried to uninstall and reboot my pc, but when I go back into Device Manager, they are both with the same error code and the sign again.  I tried to download the driver from dell, but it tells me that it cannot find the device.  Help!  I need my readers!  Thank you!

  
  

• Cannot boot from the CD-ROM drive

  I have a Dell Dimension 9100.  Operating system is Windows XP.

  The CD-ROM drive works great for playing CDs and recording stuff, but I can't boot from it.

  Everything is fine with my computer at this time, it starts fine from the HARD disk, but I anticipate before when I need to use Acronis image rescue media under my method of recovery after a disaster.

  For some reason any does not start my 9100 the drive, even after changing the BIOS boot sequence to insert 1.  My Dimension 4400 starts the CD player without problem.  4400 boots even in the backup media created in the 9100.

  I carefully followed the instructions in the Dell knowledge base article "How to configure a Dell Dimension series system to Boot to the CD drive", does not.  I opened the folder and reinstall CD drive connections.  In addition, I am at a loss.

  I hope someone can help me get this right.  Thank you.

  
  

• How can I configure my computer to boot from the CD Rom drive

  I have Windows 7 home version and I have a problem with booting from the cd rom.  I did a cd bootable for a work at home job, but it will not work properly.  It works fine on the desktop of my sister, but not my laptop.  What is happening is the CD loads when I restart my computer, but then it goes to a black screen and just stays there until I have eject the CD.  I can hear the CD running, but I get nothing after the initial splash screen.  I have reset the bios to make sure that the CD-Rom was placed up in the boot parameters.  Any ideas why this CD will not completely loaded?  Thanks for any help you can give.

  Gayle

  Please note, in order to install Windows 7, you must have a DVD player, if you have a CD-ROM drive, which will not work.

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

• Upgrade the hard drive in dimension 4700

  I want to add a larger hard drive, 500 GB + in my Dimension 4700. Currently, I have a 80 GB drive, which is the largest size, I can add and what type, 1.5 gb/s or 3.0 gb/s, it takes, and if I install a large drive I see a loss of performance? My OS is Windows XP sp2, I have 2.0 GB of memory also.

  Thanks 1million

  PS Support Dell gave me 4 responses to this question, 160,280,400, then 250. Someone help me!

  
  

• Adding a second hard drive on a Dimension 4700

  I want to add a second hard drive in my Dimension 4700. Currently, I have installed a 80 GB drive, which is the largest size, I can add and what kind it should be. My OS is Windows XP sp2, I have 2.5 GB of memory also.

  
  

• DVD-ROM drive won't read DVD

  I have this CD/DVD which will play normal CD but will not play any DVD (DVD + R, DVD-R). I noticed that the DVD would not work when I was a BONE

  RESETTLEMENT. I put in my Windows XP restore disc, and installed successfully. Then I put in my drivers disk that was on a DVD-ROM drive and it wouldn't work!

  I could hear the spinning, but it sounded abnormal, and nothing appeared in my computer. Not open same AutoPlay. Frustrated, I decided to get the drivers of

  sites of different manufacturers, including the driver of CD-ROM to see if I could start the DVD. Even after that I installed the drivers for the hard disk, DVD will not play again.

  Any ideas?

  Hello
  I suggest you run the fixit and see if it helps:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  It will be useful.

• Dimension 4700 desktop will not start

  I have a Dimension 4700 desktop computer that has been sitting in storage for a while. I wanted to start and see is there something to this subject that I had to save or erase the hard drive. As far as I know, it was working fine when it was put away. Now it won't start at all. Here is what I know-

  Dimension 4700

  Service etiquette: ADMIN NOTE: Service tag deleted by privacy policy >

  running Windows XP Home Edition

  Power light turns on and remains lit (green). DVD players do a rotation test (but will not read a boot disk). The hard drive light comes on and stays on.

  Does NOT display a Dell spash screen. The screen is blank (black) with the exception of a simple white flashing cursor (line underscore). It crashes in this condition.

  Does not meet the keyboard commands (ctl + alt + del, esc, f8, f11... etc.). Does not respond to reset (press power button in disable).

  Diagnostic lights are lit on the rear panel. A, B, C are all stable and green. D is amber and regular.

  All inner and peripheral cables seem to be properly fixed.

  When the power to the hard drive cable is removed, it does NOT POST beeps (the condition is the same).

  I can't get to the Setup screen. I can't boot from a cd. I don't get any sound signals (beeps).

  It is out of warranty, and troubleshooting knowledge base sent in a recursive loop items that never exceeded the step #2. Someone at - it suggestions?

  Because it has been stored for a while, first stage, with the PC off, is to reinstall (unplug then plug back in) all the memory, PCI cards such as video, sound, etc. and all cable connectors.  Make sure that when you plug the points back in that you get fully and correctly reinstalled.     Back off and see if that makes a difference.

• Readers of DVD of dimension 4700

  I have a DELL Dimension 4700 that was purchased in 04 ' or ' 05 and need a little help...

  The DVD RW drive has a problem of bad vibes and won't burn DVD discs...

  I came to the conclusion that I would just put in a new DVD DL drive in my machine, but I'm not sure what type I need...

  SATA or IDE?

  Belarc Advisor reports my controllers as follows:

  Intel (r) 82801FB Ultra ATA Storage Controllers - 2651
  Intel (r) 82801FB/FBM Ultra ATA Storage Controllers - 266F
  Primary IDE Channel [Controller] (2 x)

  Belarc Advisor reports my readers as follows:

  _NEC DVD +-RW ND - 3530 has [CD-ROM drive]
  SAMSUNG DVD - ROM SD - 616E [CD-ROM drive]

  WDC WD800JD-75JNA0 [hard drive] (80,00 GB) - disk 0

  Any assistance that can be provided would be greatly appreciated...

  Thank you

  Todd

  
  

• Portege R100: Solution how to restore unity without resorting to a CD-ROM drive

  I have just re-registered my Toshiba R100 after almost 3 years of owning without a single format due to the complexity of get a bootable CD-ROM drive to work.

  That won't help those of you who have a computer laptop not boot, but if yours is booting I have used the following method for re - store my laptop with zero problems.

  1. put the CD in another computer and extract the Ghost image restore files '01131000.GHO' and '01131000.CRC' of disc 1 and "01131001.GHS" of disc 2.

  2. If your laptop has a second partition and then transfer these files to a directory on your windows not partition. If this isn't the case, you will need to use partition magic to create a.

  3. create a Norton Ghost of a commercial version of Norton ghost boot disk and a Windows 98 Startup disk.

  4 start the laptop the Windows 98 disk, then swap disks and run Ghost.

  5 Select Local > Local disk > image
  And select the 01131000.GHO file.

  6 select the image you just proposed, and then select the R100? s drive and finally select the main boot partition.

  7. click on go!

  8 re-boot and follow the windows configuration and you're done.

  Hi George.

  Thanks for your useful description.
  I don't know that it will help other users here in our community.

• DVD ROM drive new satellite 5200-701and

  Hello
  I bought new toshiba SD-R6472B dvd +/-rw to replace the original dvd CD-ROM drive in my laptop.
  However this isn't wonna work, I can open/close drawer dvd and that's all. even updated bios with the rest of the upgrades available and still nothing works properly with this player.

  is it possible to make it work or external usb2.o case is the answer?

  --
  Robert

  Hi Robert,.

  You have loaded the device appropriate for the new device drivers? They should be available on the Toshiba web site.

  It should also check that the old device is removed from Device Manager and then restart the laptop. The new optical drive should then be detected during the boot process.

  HTH