Dimensions type large sizes to match the requirements of thumb.

Similar Questions

• Unable to connect to the network because the parameters of the computer do not match the requirements of the network.

  The main computer in my house is connected to the web via a modem to our ISP (Cox).  We use a Cisco's Linksys wireless router.  We have configured a new laptop to connect through the router yesterday.  Now my laptop, which had been the connection very well, can't access the network.  When I go in the "network and sharing Center" and pull up nearby wireless networks, our network shows is even more bars, just a red X.  Reads the error message "unable to connect to this network because the settings of that computer to match the parameters required network.»

  I don't know what has changed on our network, but I was unable to understand what these "required parameters" are, so I was unable to change the settings of my laptop to match the requirements.  Pls help.

  Hi Sharpdale,

  Step 1

  I first suggest you to perform network troubleshooting in Windows 7 and check if it finds problems, and if he is able to fix it.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Step 2

  Use Windows to configure wireless settings and check if it helps to solve the problem.

  a. click on Start menu and select run

  b. type ncpa.cpl, and then click OK to open the menu of the network connections.

  c. Select your Wi - Fi connection service and choose the option change settings of this connection.

  d. go to the wireless tab and select (tick) labeled use Windows to configure my wireless network

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• 'the settings saved on this computer for the network do not match the requirements of the network.

  original title: securtity settings in my computers. where should I go and see what are my security settings?

  the settings saved on this computer for the network do not match the requirements of the network.

  where should I go and see the settings?

  Hello Arturito1,

  Thanks for posting in the Microsoft Answers forum! For assistance with your question, I would recommend that you follow the steps provided by Srinivas R in the thread below:

  http://social.answers.Microsoft.com/forums/en/vistanetworking/thread/a82432f2-9312-480A-b2ea-720033c73387

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• ' Error' the settings saved on this computer for the network do not match the requirements of the network "while trying to connect to the wireless network

  Title: Cannot get an Internet connection!

  Connection Wi - Fi comes with a warning that 'the settings saved on this computer for the network do not match the requirements of the network"what should I do to get a connection?

  Hello

  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you follow the steps to run the troubleshooter from the
  link and check if the problem persists.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
   
  Method 2: I also suggest you to follow the steps from the link and check if it helps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 3: Follow the steps below to remove and add the wireless network.
  (a) click Start and select Panel.
  (b) select network and sharing Center and manage the networks without wire (on the left).
  (c) in the list, click on your network and Remove top.
  (d) you can then search for available wireless networks again and reconnect it to your network.
   
  Hope this information helps.

• View usage type lookup does not match the object list definition drop-down display

  can someone tell me why this error could be coming:
  View usage type lookup does not match the object list definition drop-down display
  
  Thank you and best regards,
  Amrit

  Hello
  seems that in your choice list item (probably call him messageChoice), you are defiining of these properties of the list view definition and the choice list view instance.
  You must provide one. If your choice list values to all users (i.e. the vo behind the choice list has no dynamic where clause or the query), then use choose list definition property. If each user sees different options in the drop-down list (i.e. dynamic where clause for vo), use the property of the lookup instance.
  In the definition of choice list, give the fully qualified name of the vo.

  Abdul Wahid

• Time Dimension type to different values in the attributes - Bug or feature?

  Not sure if this is a bug or a feature.
  
  But if there is a time dimension hierarchies. You have the option of specifying different values for member attributes in different hierarchies.
  
  For example.
  
  A hierarchy has MIN_ID for its members and uses MIN_END_DATE for its end_date
  
  Hierarchy B has MIN_ID for its members and uses SESS_END_DATE for its end_date
  
  According to this message and a comment by David Greenfield:
  
  Gender issue when several mappings for different hierarchies
  
  "You try to map the same attribute, SORT, on different columns in two hierarchies? In other words, what do you expect the same Member to have different values for the attribute in the two different hierarchies? If so, then this is a problem because a member must have the same value for the attribute independently of the hierarchy. »
  
  Unlike a dimension of the user, a time dimension seems to allow this and it seems to work as expected. Behavior in this case is the difference between a user and the time dimension?

  Your description of the structure of the dimension is very clear, but I have a question about system requirements. When you say you want to the time running from 17:00 to 16:59, do you mean that the calculation must spand day? for example "5:00 PM: Jan 1, 2012" to "4:59 PM: 2 Jan 2012".» If so, then this you is impossible by making a loop only the dimension of time-seconds. Or do you really mean it must wrap around the same day. for example "5:00 PM: Jan 1, 2012" at "11:59 PM: 1 Jan 2012", then again to "00:00 AM: 1 Jan 2012" to "4:59 PM: 1 Jan 2012"?»»»

  If you want the calculation for the period of days, then I think you need to spend TIME on the DATE dimension level. You can leave some MINUTES in the second dimension, which can be a dimension of standard user. You must then two levels of the DAY (with different members) in the date dimension - each with a different set of the child. You can assign the TIME_SPAN to the TIME level 1.

• BOOK TYPES and SIZES AVAILABLE in the PHOTOS HELP

  Can I create and order a big Paperback (8.5 "x 11") using Photos for Mac? I created more than 16 books such as the use of iPhoto, but this paperback size is not listed as available in Photos thank you for your response.

  No - there are 6 available links - these are the options

  LN

• "the settings saved on this computer for the network do not match the requirements of the network" intermittently

  Windows 8 on ASUS laptop brand new.

  TP Link WR841N router

  When I first set up connection machine windows 8 wouldn't connect.  Repeated the network key is incorrect.  When I rebooted the router the connected computer.

  However, after an interval of an indeterminate (but more than a few minutes) if I restart the computer it will not connect say the network settings do not match.

  I can forget the network, re key, turn wireless market and stop etc etc.  Will not re connect.  If I reboot the router it connects right away.

  If I disable wireless security the question goes too far.

  What happens on a windows machine 8 and my laptop school girls which is windows 7

  Android phones, imac, ipad, nintendo to connect without any problems.

  All updates applied.

  I read the other questions on that.  None of the allowed answers.  Basically it connects, then a few hours later if you restart the machine ITO is unable to reconnect.  The problem is with the security key.

  Martin,

  Try to install the latest firmware for the router then check. http://www.TP-link.com/en/products/details/?model=TL-WR841N#down

  If the problem persists, please post your question in the forum of TP-link to check if they have a fix for this problem.

  http://Forum.TP-link.com/forum.php

  Please share it if you find on the forums of TP-link.

• Settings on computer for the network do not match the requirements of the network

  
  

  Nature Boy,

  Thank you 1 million.  Problem solved and I learned something new!

  All the best!

• The settings saved on this computer does not meet the requirements for the network

  My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

  Hello Tazdmx83,

  Thanks for posting on Microsoft answers Community Forums.

  This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

  1. click on start and control access panel.

  2. double-click on network connections

  3. right click on the wireless adapter and select Properties.

  4. Select wireless networks, click the name of your wireless network and choose Properties.

  5. in network authentication, select open to disable wireless security.

  6. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

  Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

  Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Get the message that says that my iPhone wireless network does not meet the requirements of my network card.

  Adapter title: original network

  I use the network wireless from my IPhone and next to the connection, there is a message that says "the ability of your network adapter does not match the requirements of this network" it still works, but I don't know why I get this message.   The connection is blind.  The only thing I did differently is update my phone to 4.3.3

  Contact the iPhone support:

  iPhone Support
  http://www.Apple.com/support/iPhone/contact/

  Support forums:
  https://discussions.Apple.com/index.jspa

• Cannot play bigfish games - your video card setting does not match the minimum system requirements: at least 2048 x 2048 DXT1 & dxt Texture size

  Original title: I have a computer toshiba M30 laptop and I'm on windows7. problem is that I can't play at bigfish games?

  HI the error I get is: your video card setting does not match the system minimum requirements:

  The size of the texture at least 2048 x 2048 DXT1 & dxt5 Texture formats support of the target.

  Thank you Joe

  Hey Joe,

  Thanks for the post.

  We need a few more details to help games play question, please answer the following questions.

  1. is this problem limited to Bigfish?

  2 do you have any problem with other games?

  You will need to install a graphics controller (video card) which can meet these minimum requirements.

  You can go through the following link; who helps update the graphics card, this could solve the problem.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also download and install the latest display driver by downloading from the website of the manufacturer of the computer.

  http://support.Toshiba.com/drivers

  I hope this helps.

• BlackBerry smartphones what type and size of memory card the "BOLD" support?

  I would like to replace the 1 GB memory card that comes with my "BOLD" with a larger size. What type of card, should I try to get, and what is the maximum size supported? I have been informed of stories contradictory on what I should look for any help would be appreciated. Thank you

  You are welcome!

  Here is a link to the Wiki entry that gives a good discussion on SD cards...

  http://en.Wikipedia.org/wiki/Secure_Digital_card

  So, this coupled with the information of KB of RIM, would say that BB must be compatible with SDHC cards... because they are (according to the level of the OS) compatible with SD cards 4 GB in size (for vs SD SDHC cutoff point.

  See you soon!

• B2BUA disconnected call on the penetration saying "not match the transport type in the answer.

  When I'm peripheral composition of polycom in our bridge number of conference on the appeal of the internet is not connected

  I check call logs in the conductor if call b2bua disconnected on the saying of penetration "not match the type of transport in response.

  Tap call point works well from polycom device

  Polycom > Internet > vcs expressway > vcs control > driver > GST

  You have more information, such as debug log files and traces of the various components,

  How your fields look like, how your area configurations are similar, requiring the use of legs that the Protocol, how encryption should be managed...

  It would be good to understand which component creates an incompatibility and what components

  It detects and why.

  Looking at each leg, first think how you expect how should resemble the call and then see how it looks in reality can give you some advice.

  Please note assignments with the stars below and set the thread if it's an answer!