Direct Descriptive Flexfields update on the table HR_ALL_POSITIONS_F

Similar Questions

• Compile flexfield data in the tables of AOL.

  Hi hussein.
  
  I just applied the fix 8403254 and the steps of the post office is:

  Compiles flexfield data in the tables of AOL.
  Recreate grants and synonyms for applications or patterns
  Regenerate the BOM Messages.

  Where in ADAdmin AOL find?
  
  
  Thank you very much

  Hello

  Use f60gen.

  module f60gen =.

  . FMB userid = apps / output_file =.FMX module_type = form batch = yes compile_all = special

  f60gen module =.pll userid = apps / output_file = module_type .plx= library

  Kind regards
  Hussein

• PPR for the updating of the table after a click in a butto in Jdeveloper 10.1.3 - thanks

  Hi people,
  
  I looked through many messages about refreshing the page, but still did not solve my problem. Please help me. It's quite URGENT.
  
  I have a table with a command button. After you click the data insertion is engaged and the table is supposed to be updated to reflect the changes.
  
  Now I use PPR as my solution: the button is the initiator and the table is the target. I put the button property: part delivery = true and its id as a partial release of the table value
  
  What I missed, please?
  
  Note: reloading of the entire page is not a solution for me. (The table is incorporated within a region of showOneTab and there are other tables in different tabs)
  
  Thanks in advance!
  Assuming that nothing wrong with the JavaScript syntax, the explanation might be: If you ActionListener Installer (data transaction method) and javaScript on a button-click the button, the button click javaScript will not be executed. (???)

  This is not the case. In my application, the two actions of script and java onclick button are executed. Javascript onclick fires first, then the action of the button. It should be the same for actionlistener as well.

  Regarding the updating of the table after a click of a button inside the table, you can do this by forcing the partial relaxation of the table of a bean to support using addPartialTarget.

  On the actionListener to the button call the below the backup method of bean.

  Here is the code example:

      public void btnSample_actionListener(ActionEvent actionEvent) {
         // First execute the method on the button
         BindingContainer bindings = getBindings();
          OperationBinding operationBinding = bindings.getOperationBinding("buttonMethod");
          Object result = operationBinding.execute();
  
          //Refresh the iterator of table and partial trigger the table
          OperationBinding operationBindingTab =
              bindings.getOperationBinding("RefreshTable");
          Object resultTab = operationBindingTab.execute();
          AdfFacesContext.getCurrentInstance().addPartialTarget(myTable);
  

  RefreshTable is an action that runs the Execute method on the table iterator.

  Thank you
  Mitesh.

• FNDLOAD for Descriptive Flexfield update

  Hey everybody,
  
  I wanted to just consult with you on something,
  I've updated a definition descriptive flexfield (relocated part of the segments of GLOBAL in a new context, I created = I removed from overall, that released the attributes again, and then I set the slot a new field of context for DFF).
  
  -To move this configuration to another instance, I download and downloaded through FNDLOAD, DFF.
  In a first time - update failed, due to the fact that the attributes used in the new context were held by global.
  So-
  My idea was to simply delete the definitions of all THE forces in FACT in the new instance and then use FNDLOAD for download.
  Turns out OK, and update seems successful.
  
  
  I'm afraid I just delete FDF definitions completely which will adversely affect something and I think I might be missing something here.
  (After all, if it's OK, why don't FNDLOAD remove the old definition during the process of updating and then create the new definition, as it does with the customizations?)
  
  Would love to hear your ideas before you do the same on the production instances...
  
  Thank you
  Aaron

  Aaron,

  I think that you should not remove a FDF, on the contrary, you will need to disable.

  Note: 176867.1 - Oracle Applications Flexfields's, frequently asked Questions (FAQ)--5. Can I remove a descriptive flexfield?
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=176867.1

  Have you tried using UPLOAD_MODE = REPLACE? This option replaces your current values with the values that you have in the file.

  If you want to download new items in the file that do not currently exist in your database, go "CUSTOM_MODE = FORCE" option.

  Kind regards
  Hussein

• [ADF, JDev12.1.3] af:table - how to select by program level 1 (on the updating of the table)?

  Hallo,

  I have an af:table that displays the result of a custom search form.

  I need to update the properties of some of the buttons every time that a row in the table is selected.

  I would like to handle this in a SelectionListener I associated with the table.

  public void myTableSelectionListener(SelectionEvent selectionEvent) {
    ELUtils.invokeEL("#{bindings.SearchEmployee1.collectionModel.makeCurrent}",
                     new Class[] { SelectionEvent.class },
                     new Object[] { selectionEvent });
    Row selectedRow = (Row) ELUtils.evaluateEL("#{bindings.SearchEmployees1Iterator.currentRow}");
    System.out.println(selectedRow.getAttribute("Name") + " - " + selectedRow.getAttribute("Surname"));
  }
  
  

  I noticed the System.out.println prints the values of the selected line only when the user clicks on a line while that no value does print when the grid is recharged after clicking the search button.

  To resolve this problem, I guess I need to select by program level 1 in the table whenever the grid is charged, but I have not found a working method to do this.

  You kindly explain how to select by program level 1 of an af:table?

  Thank you

  Federico

  Hi Federico
  only for research you can handle this in your action of the search button (because your selection listener code works for another action), after research get the current row of your table (it would be the first rows) and run your code

  If you are using af:query, then override default query listener to run custom code

  See -Ashish Awasthi (Jdev/ADF) Blog: the substitution of the listener default query, validation in the field of af: query-Oracle ADF

  Thank you

• Update on the table by extracting the data from the table even under certain conditions

  Hi Experts,

  I have the table EMP which currently has 6 entries.

  EMP_SYS BATCH_NO JOIN_DATE LOGIN_ID STATUS FLAG

  1 FEBRUARY 10 PROD 84 Y IND123 ABC

  DEV 1-23 APRIL 98 Y IND123 ABC

  2 12 APRIL PROD 98 Y IND123 ABC

  2 2 APRIL DEV 98 Y IND123 ABC

  3 13 APRIL PROD 98 Y IND123 ABC

  3 3 APRIL DEV 98 Y IND123 ABC

  CONDITION: I need to take lines which has the minimum BATCH_NO for each of the EMP_SYS

  for example,.

  1 FEBRUARY 10 PROD 84 Y IND123 ABC

  DEV 1-23 APRIL 98 Y IND123 ABC

  For the above two lines, I need to update the status of DEF. How to select this criterion and update in the same query?

  Currently, I used the query to select the minimum BATCH_NO for each of the EMP_SYS below.

  SELECT EMP_SYS, BATCH_NO, JOIN_DATE, FLAG, LOGIN_ID, STATUS

  Of

  (

  EMP_SYS, BATCH_NO, JOIN_DATE, FLAG, LOGIN_ID, STATUS, SELECT ROW_NUMBER)

  COURSE NR (PARTITION BY ORDER OF EMP_SYS OF EMP_SYS)

  FROM EMP

  WHEN STATUS = 'ABC' AND FLAG = "Y".

  )

  WHERE

  NR = 1;

  If I try to use the update on the above query statement... It updates every 6 rows instead of 2 rows.

  Please suggest me a way to update only the two lines that has the minimum BATCH_NO for each of the EMP_SYS.

  But is possible to write the query without using the Group of?

  Update e EMP

  set STATUS = "DEF".

  where BATCH_NO = (select min (BATCH_NO) from EMP I where STATUS = 'ABC' AND FLAG = 'Y' and i.emp_sys = e.emp_sys)

• Need value Flexfield update of the system point when master Org changed value

  I need synchronize a system point flexfield between all organizations, when the value of the org master system point flexfield is changed. In other words, take a step to copy the value of the org master in the same article to all the other orgs.
  
  I first tried a database trigger, but he gets locking issues due to the fact that the trigger would generate another instance of the same trigger.
  
  Any ideas on how I can do this synchronization?
  
  Thank you
  Kurz

  This is why I said relaxing carefully drafted .
  See the following topics
  http://www.DBA-Oracle.com/t_avoiding_mutating_table_error.htm and see the links given there as well on how to avoid the error table mutation.

  The other option is that you write a custom program that synchronize attributes between master and child records. And you run the program every x minutes/hours. In this way, you will have to deal with the mutation of errors in the table.

  Hope this helps,
  Sandeep Gandhi

• Problems during the update of the table of contents

  Hello

  does anyone know why additional section numbers and points appear every time I update my OCD? Normally I just delete them.

  Thank you!

  Try to remove the numbering of paragraph TOC style options. I am sure that what is happening is to make a numbered list on the table of contents entries AND pick up the existing numbers in the text.

  Peter

• How can simple trigger for verification of status update on the table... - I get upd sql then?

  Hi guys,.
  
  I need to do a temporary simple audit on all updates on a table.
  
  That's why I create a trigger for her...
  
  However, I need to capture the SQL statement to make the update as well... However I have no way to do it, because it is always replaced by a SQL code I run to get the SESSION ID...
  
  Here is the trigger...
  ----------------------
  
  create or replace
  alert_setting_trg relaxation
  before the update on user_alert_settings
  for each line
  declare
  number of v_sid;
  v_username varchar2 (100);
  v_osuser varchar2 (100);
  v_machine varchar2 (100);
  v_program varchar2 (100);
  v_module varchar2 (100);
  v_prevsqlid varchar2 (100);
  v_sqltext varchar2 (100);
  
  Start
  SELECT SYS_CONTEXT ('USERENV', 'SID')
  IN v_sid
  FROM DUAL;
  
  SELECT the username, osuser, machine, program, module, PREV_SQL_ID
  IN v_username, v_osuser, v_machine, v_program, v_module, v_prevsqlid
  SESSION $ v where SID = v_sid;
  
  SELECT sql_text
  IN v_sqltext
  V $ sqltext
  WHERE SQL_ID = v_prevsqlid;
  
  INSERT INTO alert_settings_log
  VALUES (sysdate, v_sid, v_username, v_osuser, v_machine, v_program, v_module, v_sqltext,: new.user_id,: new.service_grp,: new.alert_setting_id,: old.alert_active,: new.alert_active);
  
  end;
  
  
  Now the problem is that...
  the capture of SQL statement will always be
  
  SELECT SYS_CONTEXT ('USERENV', 'SID')
  IN v_sid
  FROM DUAL;
  
  
  and not the UPDATE table statement.
  
  1st quarter) I have to get the SID of the session before I could know what SQL it is running.
  
  However, once I get the SID, the SQL to UPDATE the SID is run changes the SQL that gets the SID.
  
  What can I do?
  
  Rgds,
  Noob

  Instead of to the request in three steps, do it in 1. Replace all three of your queries with something like:

  SELECT s.username, s.osuser, s.machine, s.program, s.module, q.sql_text
  INTO v_username, v_osuser, v_machine, v_program, v_module, v_sqltext
  FROM v$session s, v$sql_area q
  WHERE s.sid = SYS_CONTEXT('USERENV','SID') and
        s.prev_sql_id = q.sql_id
  

  John

• Build/update dynamically the table 3D

  Hi all

  I'm having a problem with the dynamic generation of a 3D of the following set of data table:

  x: {1,2,3,4,5}

  y: {1,2,3,4,5}

  Z_1: {1,2,3,4,5}

  Z_2: {1,2,3,4,5}

  Z_3: {1,2,3,4,5}

  Z_4: {1,2,3,4,5}

  Z_5: {1,2,3,4,5}

  where there is (5) Z amplitudes associated with each measurement location.  What I am able to statically (from the above values x and y tables 1 d and 2D table Z) is to create a 3D Board made up of x and is indexed intensity to the graphic format of the 2D tables.  Each page of the table corresponds to each of the 5 Z amplitudes measured at each location.  In the attached VI, the Array Build function works perfectly for the static case where the entire data is available.  I followed the example of a another discussion forum will be subject to the provisions of nest two loops construction 2D array in the inner loop and incrementing the pages on the outer loop. The static situation is resolved.

  However, my goal is to graphically present data he is taken, point by point, to the user.  The other attached VI simulates this scenario, incrementation of x and y positions based on the measure button.  Z matrix indicator shows that the 2D Array (each individual page) is in the proper format.  The construction of the 3D picture is dynamically where I'm having problems.  I tried to build table and replace a subset of table, but none of these functions to produce the desired result.

  In the case of building table, 3D table is correctly based on the first measure: for x = y = 1, 2D array page0 is set Z_1 in position (1,1), page1 has the Z_2 value in the position (1,1), page2 Z_3, etc..  However, on the second measure, as expected, the berries are concatenated page5 have Z_1 values in the (1,1) and (2,2) positions.  This result is properly formatted, however, should the counted array 3D page is limited to 5 (page0, 1, 2, 3, 4).  So ideally, page5 should in this case replace page0.  So build array results in the correct format but concatenation is not desirable.

  The subset of spare board was made with the index of the page (outside of the loop) number to specify the subset of the 3D Board needs to be replaced.  The result was an empty 3D array.

  Thank you any help to solve this problem.

  kmsk wrote:

  Any suggestions on how to handle filling out table 3D of unknown size?

  If the size of the final table has a reasonable upper limit, you can initialize an array of slightly oversized, then keep using the subset of the table replace. It will be much faster and more effective memory than gradually more and more large networks.

  When the purchase is made, you can cut to the final size.

  Aircraft add to a table 3D using 'insert into array' or 'Build array' (favorite?), cause memory frequent shifts and might slow down your code by orders of magnitude in casing of excessive fragmentation of memory.

• Updating of the table after insert shows empty cells

  Hello experts,

  I'm trying to insert some custom values of certain fields in a table displayed on my page. The table comes a VO based entity with a sequence number and a few constraints.

  The sequence numbers batteries managed automatically by the database.

  The entry fields are related to a bean managed to get the value with 'GetValue' and then I create a string for the entry. The string then gets cut in the VO as some attributes with the following SQL calculation example:

  REGEXP_SUBSTR (attribut3, "[^,] +' 1, 5")

  But it is on the ViewObject/database layer.

  After I call the method of the VO Impl to create the new line like this:

  Managed bean:

  OperationBinding operationBinding = bindings.getOperationBinding ("addRow");

  operationBinding.getParamsMap () .put ("Value1", someInt);

  operationBinding.getParamsMap () .put ("Value2", someIntToo);

  operationBinding.getParamsMap () .put ("Value3", someString);

  operationBinding.execute ();

  
  

  Impl VO:

  
  

  ' public void addRow (integer value1, value2 Integer, String value3) {}
  

  
  

  ViewObject vo = this;

  NewRow row = vo.createRow ();

  
  

  newRow.setAttribute ("attribut1", value1);

  newRow.setAttribute ("attribut2", value2);

  newRow.setAttribute ("attribut3", value3);

  
  

  vo.insertRow (newRow);

  this.getDBTransaction () .commit ();

  }

  I capture without exception again, but when I place everything correctly and trigger the code bean managed via a button action, the table shows the new line with the correct integers, but the channel cut in two by the calculation of SQL from the top shows only blank cells. After that research with the filter of the table and remove the search filter once again, the strings appear correctly.

  For example, after you insert:

  

  Then, after 'refreshment' with the filter:

  

  What can I do about it? I can't really put the data through the InsertWithParams, because I need build the string with the Java Code.

  It only does not show data after insertion, PartialTrigger (s) also will not work.

  You must re-run the sql query after validation (with: vo.executeQuery ())

  Dario

• update of the table at the entrance to the page

  Hello

  What is the best way to update a table at the entrance to the page?

  I have a file I need to add a value of 1 for once it is loaded (it is not a counter)

  By default, the value is 0 added by mysql. I want to update for when the user saw that record when the page loads message.php for this page id.

  I did until now, but I want to submit without going through a button on the page.

  If ((isset($_POST["MM_update"])) & & ($_POST ["MM_update"] == "update_message_status")) {}
  $updateSQL = sprintf ("mailbox to UPDATE the VALUE displayed = %s WHERE mailbox_id = %s",
  GetSQLValueString ($_POST ["watched"], "text").
  GetSQLValueString ($_POST ['mailbox_id'], "int"));

  @mysql_select_db ($database_db, $db);
  $Result1 = mysql_query ($updateSQL, $db) or die (mysql_error ());

  $updateGoTo = "message.php? id ='". $row_messagesList ['mailbox_id] "]." ' « ;
  If (isset {}
  $updateGoTo. = (strpos ($updateGoTo, '?'))? « & » : « ? » ;
  $updateGoTo. = $_SERVER ['QUERY_STRING'];
  }
  header (sprintf ("location: %s", $updateGoTo));
  }

  < do action = "<?" PHP echo $editFormAction;? ">" method = "POST" name = "update_message_status" >
  < input name = "mailbox_id" type = "hidden" value = "<?" PHP echo $row_messagesList ["mailbox_id"];? ">" / >
  < input name = "consulted" type = "hidden" value = "1" / >
  < input type = "hidden" name = "MM_update" value = "update_message_status" / >
  < / make >

  Thank you

  your code all the junk and put something like this:

  @mysql_select_db ($database_db, $db);
  $mailbox_id = "-1";
  If (isset($_row_messagesList['mailbox_id'])) {}
  $mailbox_id = $_row_messagesList ["mailbox_id"];
  }
  $updateSQL = sprintf ("mailbox to UPDATE the displayed VALUE = '1' WHERE mailbox_id = %s", GetSQLValueString ($mailbox_id, "int") ");
  $Result1 = mysql_query ($updateSQL, $db) or die (mysql_error ());

• Update of the table based on another

  Hello
  
  I'm trying to update a date column in a table based on another table. There is a unique ID in each table that identifies and connects each person:
  

  update patient_bu a set a.entry_date = (select b.entry_date from CLIENT_MED_DT b where a.id = b.id)

  This is the error:
  
  ORA-01427: einreihig subquery returns multiple rows
  
  
  The problem (I think) is that the select statement back several dates for records people. There are some people / records that have multiple entry dates, but I'm only interested in the most recent date.
  
  How can I update this table with only the most recent date?
  
  Thanks for any help,
  Matt

  Oh well, I forgot the UPDATE clause:

  SQL> create table patient_bu
    2  (id number
    3  ,entry_date date);
  
  Table created.
  
  SQL> create table client_met_dt
    2  (id number
    3  ,entry_date date);
  
  Table created.
  
  SQL> merge into patient_bu a
    2  using (select id
    3               ,max(entry_date) max_date
    4         from   client_met_dt
    5         group  by id
    6        ) b
    7  on    (a.id = b.id)
    8  when  matched then update
    9        set a.entry_date = b.max_date;
  
  0 rows merged.
  

• How to convert varchar to date datatype all insert or update in the table

  Hai All
  
  I need to convert to varchar type to date.
  
  I have two Tables T1, T2
  
  Structure of T1
  
  Code varchar
  
  Time varchar
  
  Date varchar
  
  Structure of T2
  
  Var EmpName
  
  Empcode var
  
  Date of the respondent
  
  Outtime date
  
  Intrinsically date
  
  Date of Introut
  
  Att_date
  
  Now I need to spend the time form T1 to T2 respondent, outtime, intrinsically, introut under certain conditions
  
  So now I need to convert Varchar to Date so that the insert or update
  
  I tried something
  
  Insert into T1 (code, respondent, att_date) values
  
  (To_date(Date|| dele de code temps, «hh24mi de mon-dd-yyyy»), att_date);
  
  OR update while
  
  Setting a day set Outtime T2 = To_date(Date||) Time, 'hh24mi mon-dd-yyyy') where...
  
  
  I got an error Ora-01861
  
  
  Concerning
  
  Srikkanth.M

  You did not show an example of your date or time values, control may be necessary to add a space between them, like

  To_date(Date || ' ' || time,'dd-mon-yyyy hh24mi')
  

• I want to allow users to update the table through Web pages, but not directly

  Hi guys,.
  
  I have a question. There is a Web page that people are going to and through that they get into stuff and delete stuff. Therefore, it must be select, insert, delete and update on the table. Because they can only do so via the buttons on the Web page, they are not able to remove the other stuff of users.
  However, nothing to prevent them from being able to connect via sqlplus say and removing stuff directly in the table. How to work around this problem?
  
  Thank you

  OracleGuy777 wrote:
  (1) for the joint account, everyone will still be need to know the password, Yes? Otherwise, how would they be able to connect? If they need the password, what is to prevent them from logging in via sqlplus using shared account and then delete stuff?

  N ° the password on behalf of shared database would not be known by users, it could just be stored on the server somewhere intermediate (intermediate level different servers have different options for storing secure passwords on the middle tier). Then create you users of the application (i.e. an array of USERS with a user_name and a hashed_password column) and do check this hash name & password of the user when the user tries to log on by your application.

  (2) Let's say I control access via a stored procedure and call it my request. users can still connect via sqlplus and call him too much, they don't? so removing the stuff?

  Yes, if your users have a data account, and this account has access EXECUTE on the stored procedure, they could connect through SQL * more and run it. If you gave them permission to delete a particular entity, however, why is - this important if they do it through your app through SQL * Plus, or via another utility? If you put the logic for change, to verify that the user is allowed to delete the particular line, etc. in the stored procedure, the audit security implications should not depend on the front end.

  Justin