Direct Media Installer failed to start.

Similar Questions

• Windows Update fails because TrustedInstaller fails to start due to bad road cbscore.dll

  I get error 80080005 when you try to run windows update.  I followed this to the fact that the Windows Module Installer fails to start.  Using ProcMon I could find this TrustedInstaller.exe fails to start.  It is a failure due to the following:

  TrustedInstaller.exe QueryOpen C:\Windows\servicing\0.0.0.1\cbscore.dll IO QUICK REJECTED
  TrustedInstaller.exe CreateFile C:\Windows\servicing\0.0.0.1\cbscore.dll path ACCESS not FOUND
  TrustedInstaller.exe QueryOpen C:\Windows\servicing\0.0.0.1\cbscore.dll IO QUICK REJECTED
  TrustedInstaller.exe CreateFile C:\Windows\servicing\0.0.0.1\cbscore.dll path ACCESS not FOUND

  I searched and cbscore.dll is actually under:

  C:\Windows\winsxs\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_0b4ada54c46c45b0

  I tried to understand where TrustedInstaller.exe gets the path for cbscore.dll, but I had no chance.  Can someone tell me where TrustedInstaller.exe gets this way?  Or, more generally, how can I solve this problem?

  Thank you!

  The McAfee free trial (which is preinstalled on the computer when you bought it) expires before you've bought & installed McAfee Security Center?

  Installed Updates lists the the system update tool... (KB947821)?

  I'm afraid things only left in my neck are (1) performs a thorough check of malware, (2) do a repair installation of Vista or (3) formatting the HARD drive & doing a new installation of Vista. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• message error in yahoo messenger installation (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem)

  I want to install yahoo messenger on my computer while the installation is the process this error message will appear (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem). What d3d9.dll means? I try to re-intall this applications but same error message appear. Thank you! Any help or advice is appreciated.

  Hi vlademer,

  D3D9.dll is Direct 3D 9 runtime and is located in the C:\Windows\System32 directory.

  Follow these methods.

  Method 1: Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Initial full Vista installation failed, shows 2 installs of Windows Vista from starting.

  Second installation was successful, but the installation failed initial always appears at startup upward. At a complete loss to know where to find entries that say my system there are 2 installs of Windows Vista. When launched the CD to 'view' where this "alternate" install is shows unknown HDD to address 0 w a lack of disk space. Of course, it is more than likely that only some files in the registry or the system "ask" that there is a current installation. Where can I find these to remove them? Have not found anything on any forum re: this issue. TYVM<3!>

  I see that a "MVP" edited the title of the question, but it did NOT reflect what the question. Please leave the full question in the title of the post. My problem is not a simple installation of 'failure '. I just want to find out where the entries are which are originally to show 2 Windows Vista o/s when I 'start' my computer when there are 'only' real installation. Note: I have two we HARD a WinXP Pro, the other Vista disks. At the start, it shows "Versions of Windows" and then Windows Vista and finally Windows Vista again. The non-existing o/s installation failed is the 3rd entry.

  Modify the boot.ini file to remove the installation failed (make sure that you remove the right pair) or in msconfig, check the boot paths

• 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation

  When you try to upgrade Windows 7 SP1 to Windows 10 ' 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation "is a problem recurring and none of the solutions posted for a Samsung RV511 work.

  When will there be a solution of Microsoft?

  Concerning

  Hello

  Since Windows 10 is a completely new operating system, the computer manufacturer might still not have designed and developed drivers for it. As suggested waiting for the manufacturer to release the necessary drivers for the hardware and then try the upgrade.

• I am trying to download my trial version of photoshop. It says installation failed then downloads to 83%. When I click on start, it starts at 42% then fails again, again and again. Help, please

  I am trying to download my trial version of photoshop. It says installation failed then downloads to 83%. When I click on start, it starts at 42% then fails again, again and again. Help, please

  Hi Sherry,

  You can follow the thread: creative cloud hangs at 42% , where this issue is already discussed and resolved.

  You can also follow article: error "Unable to install" received when installing Adobe Creative Cloud desktop application that will help you get this fixed number.

  Let us know if it works or not.

  Thank you

  Yann Arora

• Installation of VIO problem - failed to start of neutrons

  I am installing VMware built-in Openstack (VIO) and I'm getting as a result of installation problems. I appreciate any insight into this.  Thanks in advance

  -With NSX Networking: Installation fails 95% due to the failure of start neutrons.. I tried two times, it will fail in the same place...

  Here is the log...

  2015-06-29 21:11:23, 601 p = 504 u = jarvis |  TASK: [config-controller | role service to look user tenant service] *.

  2015-06-29 21:11:24, 786 p = 504 u = jarvis |  OK: [10.2.18.207]

  2015-06-29 21:11:24, 787 p = 504 u = jarvis |  TASK: [config-controller | disable starting nod at startup services] *.

  2015-06-29 21:11:24, p = 504 938 u = jarvis |  OK: [10.2.18.207] = > (item = wink-api)

  2015-06-29 21:11:24, 947 p = 504 u = jarvis |  OK: [10.2.18.208] = > (item = wink-api)

  2015-06-29 21:11:25, p = 504 060 u = jarvis |  OK: [10.2.18.207] = > (item = wink-registry)

  2015-06-29 21:11:25, p = 504 067 u = jarvis |  OK: [10.2.18.208] = > (item = wink-registry)

  2015-06-29 21:11:25, p = 504 077 u = jarvis |  TASK: [config-controller: write the fernet key file] *.

  2015-06-29 21:11:26, p = 504 027 u = jarvis |  OK: [10.2.18.207]

  2015-06-29 21:11:26, p = 504 028 u = jarvis |  OK: [10.2.18.208]

  2015-06-29 21:11:26, p = 504 041 u = jarvis |  TASK: [config-controller: neutrons from update server] *.

  2015-06-29 21:11:31, p = 504 096 u = jarvis |  changed: [10.2.18.207]

  2015-06-29 21:11:31, 123 p = 504 u = jarvis |  changed: [10.2.18.208]

  2015-06-29 21:11:31, p = 504 136 u = jarvis |  TASK: [controller config: configuration of neutrons of update] *.

  2015-06-29 21:11:34, 334 p = 504 u = jarvis |  changed: [10.2.18.207]

  2015-06-29 21:11:34, 338 p = 504 u = jarvis |  changed: [10.2.18.208]

  2015-06-29 21:11:34, 350 p = 504 u = jarvis |  TASK: [config-controller: initialize the database of neutrons] *.

  2015-06-29 21:11:35, p = 504 950 u = jarvis |  changed: [10.2.18.207]

  2015-06-29 21:11:35, p = 504 951 u = jarvis |  TASK: [config-controller: stop neutrons on all controllers] *.

  2015-06-29 21:11:36, 118 p = 504 u = jarvis |  OK: [10.2.18.208]

  2015-06-29 21:11:36, 128 p = 504 u = jarvis |  changed: [10.2.18.207]

  2015-06-29 21:11:36, 138 p = 504 u = jarvis |  TASK: [config-controller | start neutrons on the first controller] *.

  2015-06-29 21:11:36, 386 p = 504 u = jarvis |  changed: [10.2.18.207]

  2015-06-29 21:11:36, 387 p = 504 u = jarvis |  TASK: [config-controller: wait neutron start on the first controller to NSX] *.

  2015-06-29 21:26:36, p = 504 877 u = jarvis |  has failed: [10.2.18.207] = > {'passed': 900, "failed": true}

  2015-06-29 21:26:36, p = 504 877 u = jarvis |  MSG: timeout when waiting for 127.0.0.1:9696

  2015-06-29 21:26:36, p = 504 878 u = jarvis |  FATAL: all hosts have already failed - abandonment

  viouser@localhost:/var/log$ sudo cat /var/log/jarvis/ansible.log

  This solved, after adding additional computing resources to the cluster Management.  I already have 4/6 Core 4 servers, added a more and the installation went well.

  Thank you all for your time and help on this... Very much appreciated...

• After the installation of 6 of Lightroom, it fails to start due to the fault of libcef.dll

  Had to reinstall Windows 7 (64-bit). After the installation of 6 of Lightroom, it will fail to start due to an error in libcef.dll.  Three event log entries are created, as indicated under my signature.  Can someone help me please?

  Thank you

  Jeff

  Name of the failing application: lightroom.exe, version: 6.0.0.10, time stamp: 0x5523190c

  The failed module name: libcef.dll, version: 3.1750.1805.0, time stamp: 0x53eb9d68

  Exception code: 0xc000001d

  Offset: 0x00000000020f5fa3

  ID of the process failed: 0 x 1280

  Start time of application vulnerabilities: 0x01d0cb85de3cf6e8

  The failing application path: C:\Program Files\Adobe\Adobe Lightroom\lightroom.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe Lightroom\libcef.dll

  Report ID: 1c5e2536-3779-11e5-80d1-f07959dbe0d5

  --------------------

  Windows cannot access the file for the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing. Windows has closed the program Adobe Photoshop Lightroom because of this error.

  Program: Adobe Photoshop Lightroom

  File:

  The error value is listed in the additional data section.

  User action

  1. open the file again. This could be a temporary problem that can be corrected when the program runs again.

  2. If the file is still not accessible and

  -C' is on the network, your network administrator must verify that there is not a problem with the network and that the server can be contacted.

  -C' is on a removable disk, for example, a floppy disk or a CD-ROM, check that the disc is inserted into the computer.

  3. check and repair file system by running CHKDSK. To run CHKDSK, click Start, run, type CMD and then click OK. At the command prompt, type CHKDSK /F and then press ENTER.

  4. If the problem persists, restore the file from a backup copy.

  5 determine whether other files on the same drive can be opened. If this is not the case, the disc could be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for assistance.

  Additional data

  Error value: 00000000

  Disc type: 0

  --------------

  Fault of type 166477209, bucket 20

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: lightroom.exe

  P2: 6.0.0.10

  P3: 5523190c

  P4: libcef.dll

  P5: 3.1750.1805.0

  P6: 53eb9d68

  P7: c000001d

  P8: 00000000020f5fa3

  P9:

  P10:

  Attached files:

  C:\Users\Jeff\AppData\Local\Temp\WER7B95.tmp.WERInternalMetadata.XML

  These files are available here:

  C:\Users\Jeff\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_lightroom.exe_29c 7eed9d3cf76b21ad83d1fc4d12620f679d41d_13bebd46

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: 1c5e2536-3779-11e5-80d1-f07959dbe0d5

  State: 0

  Hi Jeffrey,.

  Please refer: " Lightroom 6 crashes when I try and open it."  Signing off CC does not help :-(

  I hope this helps.

  Concerning

  Megha Rawat

• Deparquement cloud installation I get the message which appears "failed to start CoreSync could not create/Library/Application Support / Adobe / CoreSync ' on an iMac with OSX Yosemite 10.10.3. The finalization of installation not its actually not. C

  Deparquement cloud installation I get the message which appears "failed to start CoreSync could not create/Library/Application Support / Adobe / CoreSync ' on an iMac with OSX Yosemite 10.10.3. The finalization of installation not its actually not. How do I?

  Brandon,

  Please adjust the permissions of the user on this issue: activation and using the user 'root' on OS X - Apple support

  You can also find details on how to adjust the permissions of file to error 'Output 6' or ' exit 7 "|"» Install log | Read, write, file system errors. CS5, CS5.5.

  See also:

  https://forums.Adobe.com/thread/1714050

  https://forums.Adobe.com/thread/1828087

  Guinot

• Failed to start after installation ('no internet connection')

  After installation, when I start one of the programs of TC it tells me that either there is no Internet time setting my computer does not. I checked that no proxy server is set and that (of course) my clock is set correctly. We have installed the CHT several times in the team without problems is not a firewall issue. Any ideas?

  ADDING: I checked the four needed to record server address is accessible. Is there some sort of record in offline mode? It seems that even users who really have no internet connection (for example for security reasons) must be able to register...

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Failed to start the installer

  Hello. I have the problem. When I go to install Adobe CS6 got the error 'Boot of Installer Failed. I used CCleaner and continues? Can you help me?

  Try Adobe Cleaner use the Adobe Creative Cloud cleaning tool to solve installation problems

• A domain on the server vCenter Server installation causes vCenter Server fails to start

  Hi guru,.

  Well I tried for a while, to get my vCenter Server to work with my newly created domain name and at least i did not have much luck. It seems that every time that

  I have create a new domain and restart the system. For the VirtualCenter Server service fails to start on reboot. I checked my odbc connection and test works very well.

  I am able to log in microsoft management studio without problem. But still, the service does not start I understand I can meet here, it's probably a

  with my database permissions issue.  However I can't seem to find the answer by myself if I m hoping to hear some suggestions from all of you who help on this.

  Thanks for the replies!

  Sean

  Uh, you have not installed vCenter on the same server that is running your domain controller you have?

  ADAM and cannot run on the same machine AD.

  If it is installed on the same computer that your DC - get a new machine for VC - this configuration will never work. (minimum supported ram is 3 GB.)

  We see in the newspapers that ADAM is not from, and that's why VC fails to start as well.

  Failed to get all pages of search results: 0xa (a reference was returned by the server).

  Couldn't find OU = container of Instances.  This may indicate a problem with the LDAP permissions for the execution account VirtualCenter, or that the schema is not compatible with this version of VirtualCenter.

  Unable to run the search for the instance

• Microsoft XP blue screen and message - this applicationhas failed to start because LSASRY.dll was not found, that reinstallation can correct moyenessentiel,

  no disc recovery... on a Panasonic Toughbook CF-50

  Let's see...

  If you see a message like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because lsasrv WITH. DLL was not found.  Re-installing the application may fix this problem.

  Then, when you click OK, you have nothing more than a mobile mouse cursor.

  I seriously doubt that the opinion of the engineer of Microsoft Support for try the last good known Configuration will replace a missing file, so that theory approaches the area of ridicule.    This is not what LKGC, that is not what he does and is not how it works.

  Re-installation of XP is a very bad idea.

  There is also no need get a Windows XP installation CD, because you can create a bootable XP Recovery CD yourself and then see to replace the missing file.

  I understand not all next to a Microsoft representative.  Obviously not tested, won't work, won't help, but there are the necessary links to an article.   It's just another MSE wild-goose chase.

  The lsasrv.dll file should really never be missed, so answer these questions as the best yo can:

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Then at the Recovery Console prompt enter orders to replace the missing file from backup copies that are already on your system:

  Copy c:\windows\system32\dllcache\lsasrv.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Depending on your system configuration, you may need to copy the files somewhere else, so if they are not in the folder dllcache for any reason, enter the command like this:

  Copy c:\windows\ServicePackFiles\i386\lsasrv.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Remove the CD and then type "exit" and restart your system.

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• DVD player does not appear error - the driver may be corrupted or missing. Code 39, fix the driver installation fails, virtual drives don't work - same results if the material under tension

  Original title: drive does not appear, difficulty he pilot installation fails, virtual drives don't work - same results if the material under tension

  A few weeks ago, as my two DVD players (the two Samsung Lightscribe SH-S223Q of) disappeared after a repair installed, I did for the other problems (not sure if it was directly after installation because I don't notice it right away, but it was no doubt). In Device Manager, it gives the message:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried the Microsoft Fix It tool (Mats_Run.dvd.exe) that detects the problem and says "Install device driver" in a popup, but then he says "software device driver failed to installed. At the end it says under the issue, the "CD/DVD drive is not detected" and the status of Fix 'not set '. Note that, when I boot from another hard drive (with Vista 64 on it installed from the same DVD, just a new installation) disks appear very well. Also I can boot from the drive as well.

  I can't do a repair installation, since it must initiate Windows, and I can't load the disc. I tried to update my BIOS but that has no effect.

  Recently I actually moved this hard drive to another one, with another brand of hard drive and all the rest. Just like before, if I boot from another hard drive (this one with Windows 7), the drive unit-a Optiarc AD-7230 s - looks and works, and I can also boot from the drive at startup. But since the drive hard as I want to use, the drive does not appear. Fix it, etc. Device Manager gives the same messages as before.

  I tried virtual drives - Daemon Tools Lite and Virtual Clonedrive. When I try to add virtual devices to help, nothing happens. The new drive will be displayed in the Manager of devices, but with the same error Code 39 as the real drive.

  What are my options at this point? How can I get the drive to appear or to fix my copy of Windows?

  I could solve this problem. I started in Ubuntu and deleted the existing cdrom.sys, cdrom.inf etc. files (as in Windows, they were protected and I couldn't delete them), then I copied the files from another installation of Vista I had on another hard drive. After having done that, I updated the drivers in device, disabled/enabled readers and readers management that presented themselves.