Direction of scrolling logo change?

Similar Questions

• How to reverse the direction of scrolling using the mouse wheel which is simillar to 'natural' scroll of MAC

  I use the latest version of Firefox (31.0) on Windows Pro 8.1. I wanted to mimic OS X way of scrolling in the window of the browser called 'natural' to scroll. I edited the registry setting for my logitech mouse and scrolling works perfectly as I wanted it to every single window on my system with only one exception, the Firefox browser.
  Somehow, Firefox is configured to use the old method of scrolling and does not respect the registry settings of windows, as all other windows.
  Is it possible to change or reverse the direction of scrolling?

  Thank you
  Roman

  Roman Hello, try this: enter about: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named mousewheel.default.delta_multiplier_y. Double-click it and change its value to -100.

• Is it possible to have the Parallax scrolling and changing slide show? (so the slideshow still looks and looks you scroll your top content once again)

  Is it possible to have the Parallax scrolling and changing slide show? (so the slideshow still looks and looks you scroll your top content once again)

  You can apply the opacity to images or defining a key position for slide show as well as with the page highlight opacity changes and will bring similar effect.

  Thank you

  Sanjit

• Direction of scrolling of Lion

  Is it possible to reverse the direction of scrolling for guests of Lion?

  This preference is normally in the trackpad settings, but this pane is empty for me.

  Thank you

  Sailesh

  Currently, VMware virtual machines are always a virtual mouse, not a trackpad, it's why I suppose that Trackpad preferences are not available to you.

  Try scrolling reverser, which was made to help practical developers using the reverse Lion style scrolling on non-Lion systems.

• Linux Firefox 38 Scroll Bars change (for worse) behavior

  With the update for Firefox 38, the scroll bars are are suddenly bad. The correct behavior for Linux scroll bars when you click on above view indicator (the part that you can move) is to move to the top of the screen and when you click below view indicator is to move to the bottom of the screen. When you the Middle click in an invisible box, it moves you directly to this part. And you can enter the indicator and drag it anywhere.

  With 38, when you click above or below the indicator view, it now moves you directly to this part/area rather than move to the top or the bottom of the SCREEN. This is not another Linux applications - LibreOffice, claws, Pluma, Thunar, etc.. It is inconsistent and a mess of support. Worse, I searched on the preferences and about: config and I cannot find a way to put it back the way that it is supposed to work (as it did in Firefox 1 to 37 and even Netscape Navigator). What is going on?

  Help! Thank you

  HI crxssi,
  I understand that in the linux version of Firefox, there is a difference in the way that scrolling works in version 37 and 38.

  There are two places that control smooth scrolling:
  Subject: #advanced under 'Général' preferences there are scroll smoothly.

  There was another topic: config entry mentioned here: https://support.mozilla.org/en-US/que.../981140

  However if there was a change in the update, please post if there is not always an improvement.

• HP Envy 13: Clickpad parameter reset each connection - reverse the direction of scrolling

  Hello

  Just got my new Envy 13 about 3 days ago, I have to scroll direction in 2 freeze each unique connection of reverse scrolling UNABLE. I clicked on apply whenever I changed the setting but still the same.

  Version Synaptics pointing device is 19.0.12.95.

  However, in the Web of Synaptic the last site available driver is Windows 10 PS/2 and v19.0.19.1 SMBus devices.

  I can just dwnload from here or wait for HP Support Assistant to deliver the new update of the Driver?

  Please help me

  Thank you very much

  Rach

  Hello @shingy21,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I understand that you have a problem with the TouchPad and wanted to help you!

  For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:

  How can I find my model number or product number?

  If the notebook came preinstalled with Windows 10?  Or you upgrade to Windows 10?  In the meantime, you can try following the steps provided by Member of the DanG82community:

  HOW TO TROUBLESHOOT THE TOUCHPAD SETTING RESET

  1. Download version 18 of the Synaptics TouchPad Driver and software.
     • Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model.  Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down.  Find the download in the category 'driver-keyboard, mouse and input devices.  If a Synaptics driver with a version from 18 number figure, download.
     • If a Synaptics driver with a version from 18 number is NOT listed, download the driver directly from HP (http://ftp.hp.com/pub/softpaq/sp68001-68500/sp68198.exe).
  2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
     • In Control Panel, select administrative tools, and open Services.
     • Go to Windows Update and double-click it to view its properties.
     • Click on stop to stop the service to run.
     • Change the Startup Type to manual, and then click OK.
  4. Uninstall the version 19 of the Synaptics TouchPad driver.
     • In Control Panel, select Device Manager.
     • Click on the "+' beside 'mouse and other pointing devices" to expand this category.
     • Double-click the Synaptics TouchPad of SMBus to view its properties.
     • Go to the driver tab and click on uninstall.
     • Check the box to delete the driver for this device, and then click OK to uninstall.
  5. Uninstall the version 19 of the software Synaptics TouchPad (HP control area).
     • In Control Panel, select programs and features.
     • Scroll down to the area of control of HP (published by Synaptics Incorporated) and uninstall it.
  6. Restart your computer.
  7. Install version 18 of the Synaptics TouchPad Driver and software.
  8. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates for the Synaptics TouchPad driver.  (This will block your system automatically reinstall or display of updates for the version 19 of the pilot).
  9. Change back the setting of Windows Update Services to manual automatic (delayed start).
  10. Restart your computer.
  11. Rejoice!  Your TouchPad settings will save eventually in the sessions again.

  Source: Re: Windows 10 - laptop will not go into the mode 'sleep'

  Please post back with the results.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Anyone else annoyed by the direction of scrolling for touchpad in windows 8?

  don't know who to point the finger (lenovo, synaptics or Microsoft), but I'm not a fan of scroll upward on the touch pad to go down the page. And I like to go between my work computer (win7) and my computer at home (win8) I always go in the wrong direction.  I think that this should be configurable by the user.  If enough people how / view on this maybe we can get a listening ear.  Thoughts?

  I didn't mind it; I just thought of it as pushing the page up.  However, there is a way to change this.  Go to the bar of charms and find the Trackpad.  Go search settings, and then click settings.  Go to the two-finger scroll box, and then click the gear that appears at the end of the line.  A box will pop-up; Uncheck the box Enable Reverse scroll, hit the window and OK on the other window.  This changes the direction of travel.  If you have any questions, go ahead and ask. I will subscribe to it, so I can get back within 24 hours.

• direction of scroll wheel

  I do not think that there is an answer or solution to this problem but here goes. I've been using a Microsoft Explorer Mouse on my iMac for a few years and it worked fine and still actually, somehow. Last week I upgraded my system to 10.6.8 10.8.2 and when I did the reverse scroll wheel direction itself. When I have the wheel towards me the scroll bar goes upwards and vice versa. Is there a way I can reverse the direction of the scroll wheel? I upgraded the software to the latest for this particular mouse without result.

  Since that happened after I installed an update of the OS - X, I would ask Apple if it is a known problem and if there is a solution for this.

• I have change my resolution at large but now its great and I can't scroll to change what? I can do

  I changed my resolution to great... now, I can get to change it cause the screen is big and I can't scroll down to apply the change... What can I do to solve this problem.

  Hi elizabethp,
   
  -What exactly happens when you try to scroll down? Are you unable to do?
   
  First of all, try to reduce the dots per inch (DPI) scale and see if you can change the resolution.
   
  For more information, see:
   
  Make the text on the screen larger or smaller
   
  Change the screen resolution

• Horizontal scrolling text change number field on the 6.0 devices

  Greetings,

  I'm trying to create a horizontal scrolling editable text field.  The general approach is to add an EditField to a HorizontalFieldManager who has the style bit HORIZONTAL_SCROLL.  It works very well on all devices up to 5.0.  However, I'm a problem on 6.0 devices.

  When the user tries to scroll right well that focused on this field, the text moves to the left and turns off visible region of the horizontal field manager.  This can also be reproduced when you tap the (torch device) and continue dragging to the left until it will disappear from the screen.

  Now, I understand that this happens because the edit field itself has a width of ~ infinite because its container Manager has scrolling enabled, but is not an acceptable user experience.

  I tried to limit the width for the edit field to the width of the text, but which caused exception argument not in conformity.  I tried a RichTextField with style hack USE_TEXT_WIDTH bit by directing the keyDown to setText field entries but have other problems.

  My remaining solution is to restrict the limit of characters for the width of the Manager, the text on the new line that I saw almost all others apply or write my own implementation of scroll.  The only exception is the address bar of the BlackBerry native browser application that seems to be a custom implementation.

  Reference:

  http://supportforums.BlackBerry.com/T5/Java-development/sample-code-scrollable-one-line-text-input-f...

  Any thoughts would be appreciated,

  Thank you.

  Thank you, setScrollingInertial (false) was actually what I was looking for.

  I was not able to implement your approach correctly but I was able to complete another work autour, I had before with the help of setScrollingInertial (false).

  Instead, I used a scrolling listener to limit scrolling based on the length of the text (new scrolling when limits are reached).  Without setScrollingInertial (false), the scrollChanged reminder would have been called multiple times all by animating the inertia.

  Unfortunately, I won't be able to apply this hotfix, because my generation must take over the 4.7 and setScrollingInertial is 5.0 + (customer doesn't want additional constructions).  However, this will be useful for future projects.

• HP Logo change

  Hello.

  When I start the laptop G42-230BR, it shows the HP logo. How can I change?

  Hello

  The only way to do this is to extract the bios code, re - write the bitmap image encoded in BIOS, re - calculate the checksum, repacked the bios and flash the chip for the bios with the modified version.  If it is not done correctly, you could easily "brick" your laptop. I recommend strongly that if you didn't do this before, do not try this - it's so easy to make a mistake that can ruin your laptop.  If you really want this done, try to find someone you know who has done this before and ask them to do - as I mentioned, I really wouldn't take the risk.

  All the best,

  DP - K

• Whenever I reboot, the "Microsoft mouse and keyboard Center" loses the setting "flip direction of scrolling.

  I would like to add another computer to my list with this bug. I have even run chkdsk. I posted that I had this problem with a Samsung Ativ see Chapter 7, tab 5. I would now like to add to this list a pole of the Surface Pro 2. Although, oddly enough, I don't have this problem for a long time, and it was overall very rare until I took my first SP2 and exchanged for another. The frequency of problems have increased with the second Service Pack 2. I don't see this as being a useful diagnosis, just an anecdote.

  I would like to add another computer to my list with this bug. I have even run chkdsk. I posted that I had this problem with a Samsung Ativ see Chapter 7, tab 5. I would now like to add to this list a pole of the Surface Pro 2. Although, oddly enough, I don't have this problem for a long time, and it was overall very rare until I took my first SP2 and exchanged for another. The frequency of problems have increased with the second Service Pack 2. I don't see this as being a useful diagnosis, just an anecdote.

  Remember, chkdsk used to dismiss the problems of file system that can cause the pilot and problems of parameters.  That it will not solve a driver problem unless a file system error is the cause.  Completely uninstall, reboot, and reinstall the software and drivers, followed by an another restart can help.

  You have activated sync settings? If so, turn it off and remove the settings all synchronized on all synchronized computers.  Reboot, login, change the settings to tilt scrolling, confirm that scrolling is reversed and then reboot again.  Then you can return again to sync on all PC settings, you use it with Windows 8.1.  Does make a difference in your situation?

• The effect of scrolling has changed

  Hello

  I am a user of Lausanne, hope you understand my problem.

  

  "pour that scrolling effects can be enabled, your page must Aperta a single breakpoint fixed"

  Google translation:

  
  

  '' le scrolling the effects can be activated, your page must have a single point rigid stop. "

  Does it means that we can make that a single fixed point the effect of scrolling?

  This is an example with a lot of objects scroll on our old site:

  http://www.gawson.com/shop.html

  Please us heeeelps =)

  See you soon

  Scrolling effects has not changed at all. But cannot use the fluid pages with more a breakpoint at this time. This will be possible future updates.

• Direction of scrolling for mobile and tablet of switching

  Hello

  I am creating a web page with horizontal scrolling, but with the sense of vertical scrolling of the mouse. It now dawned on me only for use on mobile phones and tablet users will not be able to access the site by using the vertical scroll. Is it possible to go scrolling when on mobile phones and tablets without changing the whole layout.

  Thank you

  To change the orientation of the page itself with scrolling for mobile devices? In this case, no, we cannot simply change the scrolling horizontally with all content being same with vertical scrolling.

  Thank you

  Sanjit

• Logo change?

  Hi all
  
  R12.0.6. in the login page how do I change the newspaper oracle to custom company logo?
  
  Baskar.l

  Belot,

  Please refer to these documents.

  Note: 551795.1 - how to change the default image on the home page showing as 'E - Business Suite'?
  Note: 395445.1 - Oracle Application Framework profile Options version 12
  Note: 421636.1 - how to replace the default Logo Oracle with a custom Logo?
  Note: 459350.1 - R12 - size Image on the Page of connection problem

  Thank you
  Hussein