HP Envy 13: Clickpad parameter reset each connection - reverse the direction of scrolling

Similar Questions

• What is each connection push the need to go through the BES Blackberry?

  Hello

  This is a general question for any expert answer.

  I have boost registered midlet that accepts streaming connection on a given port, registered as socket: / /: 1234

  The intention is for a browser in the device you can connect to this application using http://localhost:1234 (or 127.0.0.1).

  This works perfectly well with the other J2ME support for mobile devices like Symbian. Is it allowed on Blackberry? Or does each connection to push a pass through the Blackberry Enterprise Server?

  It seems that I'm not allowed to save a midlet push without activation with the BES (ESS if BB Simulator). Why is this restriction?

  Thank you

  Paiva

  You can try adding '; deviceside = true' to your URL

  It expressly requires the device to use a direct connection instead of the connection of the BES

• HP ENVY 4-1200 ultrabook: unable to connect to the windows service

  I got this notebook for a week, it has started to come on the screen at startup * unable to connect to windows. Windows could not connect to the group. Political Clent. This problem prevents standard users connect * did anyone know what I can do about it at the start. Thank you

  Please try the fix described below:

  

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• envy TS m6 Sleekbook: unable to connect to the internet

  I can't connect to the internet.  I've had this laptop for 3 years and no problems until now.  I tried to connect via an Ethernet and wireless.  Both have active connections (full bars in wifi), and everything seems fine with them.  No problem, run the network troubleshooter utility.  The problem is when I try to run a program that requires an internet connection (google chrome, microsoft outlook, etc.).  No program will establish a connection.  My browser expires whenever I open it, outlook cannot download emails, etc..  When I try to start solving the problems of internet connection, I get the following message: "Web site (www.microsoft.com) is online but does not respond to connection attempts." This error is listed under the error "Troubleshooting could not automatically solve all the problems."  All other devices in my house (tablets and computers) have no connection problems.  I use AVG Zen to my firewall and virus and protection for more than a year without any problems.  No recent change in the software, hardware, or configuration.  Thanks in advance for any help.

  Hello @navynuc235,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I came across your post about the connection problem and wanted to help!

  For starters, can you provide me with the product number of the laptop?  Here is a link, you can use that will help you find your model and product number: How can I find my model number or product number?

  You have the same problem when connected via the ethernet cable?  Or is it only happens with WiFi?  Try to scan your system for malicious software.  You can use this tool to help you, if necessary: Malicious Software Removal Tool

  Then try disabling your AVG and see if you still have problems connecting.  If you're still having problems, then try to review the following document and let me know how it goes:

  HP PC - Troubleshooting wireless network and Internet (Windows 10)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• OAM 11 g SSO: receiving error OAMAGENT-02027 on each connection after the first

  I'm using the ASDK 11 g to connect to a server (11.1.1.5) OAM 11g. We have the configured server and SSO work and we can see that it works for the first user to connect. However, after that sign first, everyone else cause the following exception occurs:
  "oracle.security.am.asdk.AccessException: OAMAGENT-02027: Oracle AccessGate API is not initialized."
  
  Whenever authenticate us the user, the following steps are processed:
  
  -Get the session token
  -Create a new default instance of AccessClient with the given configuration directory and 10g CompatibilityMode [ac = AccessClient.createDefaultInstance (OAM_CONFIGURATION, AccessClient.CompatibilityMode.OAM_10G)];
  -Create a new UserSession object with the token and the access generated access client
  -The information required of the UserSession object
  -Stop the instance of AccessClient
  
  
  On the first invocation, it rolls and the user is brought to our application after the default login page and that they are correctly recorded in our system. Connect the other errors on 'create a new object UserSession... '. "step shown above with the above exception.
  
  If someone has encountered this error and know how to fix? Or have any suggestions about how to try to determine what is the problem?
  
  Thank you
  
  [EDIT]
  Fixed the title, this isn't a server OAM 11 g, 10 g.
  
  Edited by: mBaldwin on 8 March 2013 13:42

  The new g 11 API differs a lot in terms of how the ASDK is initialized. In 10g, you would initialize the ASDK for each application, however, 11 g, you just launch the ASDK once at startup and then use it again to stop.

• HP ENVY 4520: HP ENVY 4520, ask for password when connecting via the iPad

  Hello
  Depending on the subject, what password he asks?

  I don't remember setting a place at installation.

  You must print the Config network to see your password.

• To connect to the desktop from the internet view

  Hi all

  I recently installed a view connection Server 5.0 and a manual pool with a single desktop computer in order to access my VMware infrastructure while I'm not at home.

  I redirected the port 443 and 4172 access to connect to the server view and I am able to authenticate but the customer view freezes when I connect to the desktop computer because she needs the internal ip address of the office.

  I don't understand the principle of the use of the customer in view of the internet while each connection to the servers or office uses the internal ip or FQDN address. What did I wrong? What should I do to just plug in my office to view with the client from the internet?

  You must activate the tunnel and the tunnel of PCoIP on the broker for connections (on the admin interface > servers > Connection Broker) and specify the external URL (that you access from internet. for example, vdi.home.com, not the host name internal.)

  You must also specify the external IP address. Is that you expose to the outside.

  Linjo

• Envy 13 d010nw: HP Envy 13 trackpad always resets to default

  Envy 13 laptop, for a week. The Synaptics Clickpad settings reset by default after each reboot.

  Hello

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

  Kind regards

  DP - K

• Printer Envy 5530: why I can not connect my Macbook on this new printer? Download HP and Apple and disc. NO.

  My HP Envy 120 died today after only 13 months. Bought the 5530 want to replace. My Macbook running lion 10.7.9 impossible to install the software of Apple, HP or the disc drive. Please someone tell me what to do. It seems crazy that each site recommend one for download. If the download n 't possible that they would be kind enough to give me an error message. life is too short for all that. Have installed ink cartridges, but will be back tomorrow if I can't make it work. Need a printer! Thank you very much for ANY help! Very grateful in advance.

  Hello @Islandedisto,

  Welcome to the Forums of HP Support!

  I would like to help you today with the installation of your new HP ENVY 5530 e-all-in-one printer on your Mac OS X 10.7. There is a chance that the old remains of your HP Envy 120 drivers cause a conflict when you try to install this new printer Envy. Can I please have you follow the steps below to solve these conflicts to occur.

  Step 1: Resetting the printing system:

  To begin, I will have you reset the printing system on your Mac because it is important that we have a pleasure to work with for troubleshooting clean slate. Please click herefor instructions on how to perform the reset. When the website opens, follow the steps under 'Reset the printing system in OS X Lion'. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them in. do not add your HP Envy in at this time.

  Once the reset is complete, proceed to the next step.

  Step 2: Uninstall the drivers and software:

  Please click here to find out how to properly uninstall your printer. Once the site opens, select the drop-down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps to complete uninstallation. This should clean up any software and drivers for your old HP Envy 120 institutions.

  Once the uninstall is complete, please continue on.

  Step 3: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 4: Check the Apple updates: 

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Install the drivers:

  1. Please click here to download the latest full-function software package and the driver for your printer
  2. Once the site opens click on the download button at the top left
  3. Once the download is complete, follow the steps on the screen to install your new HP Envy

  Once installed successfully, your HP Envy, please try printing and scanning to ensure the full functionality of the product.

  Please reply to this message with the result of your installation. I look forward to hear from you!

• ENVY 750-197c: still cannot successfully connect to wifi?

  Hello! I received my new desktop PC (a 750-197 c ENVY) probably about two weeks ago. Since then, I was not able to connect to wifi. The office came with Win 10 which I really didn't yet, so I went down to Win 8. After not being is not able to connect to wifi, I returned to win 10. I could not even connect. The connection attempt process seemed worst in 10 to win, because I have never managed to connect anytime, unlike Win 8 where I could connect perhaps at some super random time briefly for a minute I did my research and checked in high and low for the solutions to the problem. Convenience stores would often come with nothing, or some problems such as:

  • "'one or more network protocols are missing on this computer ' (only on 10 to win)"
  • "default gateway is not available" (On the two 10 Win & Win 8)

  After trying everything, including the netsh commands and update drivers, I was still not able to connect so I bought an external USB (Belkin N300) adapter to test things in case there was a problem with my computer built into the adapter (Intel(r) Dual Band Wireless-AC 3165). I also had to come back to Win 8 given that the new adapter is not compatible with Win 10. I noticed a difference after the installation of the USB adapter - wifi will be done 'connect' now and show 5 bars of signal strength. However, the connection is still not usable. I'll every few minutes or so get a yellow triangle on the network icon and after a repair I will no more no results or one of:

  • "default gateway is not available" (Which Windows will fix in the troubleshooter, but don't always give no internet)
  • "windows cannot communicate with the device or resource (primary DNS server).
  • "your computer seems to be configured correctly, but the device or resource (DNS server) does not.

  Other times there a yellow triangle but once again, still not usable. I feel at this stage, there is a problem somewhere with perhaps the computer settings? Connect my internet real and router works fine. My other devices connect correctly, including my laptop in the same room with this desktop computer. I tried to reset my router, but it does not solve the problem. I checked that the adapter is configured to obtain the address IP and DNS server automatically, which is. I also tried the netsh commands

  Spoiler (Highlight to read)

  ipconfig/release
  ipconfig/all
  ipconfig/flushdns
  ipconfig / renew
  
  netsh int ip set dns
  netsh winsock reset

  /releaseipconfig ipconfig/all command /flushdns ipconfig ipconfig / renew netsh int ip set dns netsh winsock reset

  still nothing. I really need help to fix this and would be grateful for any help!

  Hi there @KianaLofton,

  Welcome to the Forums of HP Support!  I understand that, after the decommissioning of your system of Windows 8, you have had problems with the WiFi connection and probably the drivers.  I'm happy to help you with this.

  Looking at your previous posts, I feel that Wifi was working before the downgrade of the OS.  Did you by chance do plant a set of recovery discs for your system before moving on to Windows 8?  If this isn't the case, then you want to maybe get a game to the reference level of the system to the factory installation and see if it works again, then we can know that the issue is all about software and drivers, and there isn't an underlying hardware problem.  Computers HP - get HP recovery disks or HP USB recovery disc

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP ENVY 17-j184na Notebook PC: problems of wireless connection on the new laptop

  I bought a new laptop a few days ago and tried to connect to the network without wire in our apartment for 2 days but nothing helped.

  So far, I did the following steps:

  -Restore the system to factory settings.

  -Powercycled the network.

  -Reset the TCP / IP / catalog Winsock.

  -Checked and changed the stop option.

  -Re-installed and updated all the drivers of network.

  -Started in SafeMode w / networking and still unable to connect.

  -Ran all 3 windows solve problems and the problem of internet connection of HP.

  -Updated the BIOS with the latest version of the driver.

  I created my own personal hotspot using my phone and managed to connect very well, so I think that maybe that's a problem with my laptop to connect to my router, but everything else connects very well.

  I have an ethernet cable connected and has associated with perfectly too.

  My laptop is a HP ENVY 17-j184na Notebook PC and my wifi specifications are

  Manufacturer: Broadcom
  Description: Broadcom BCM4352HMB 802.11ac adapter Wi - Fi 2 x 2
  Driver version: 6.30.223.221
  Physical address: 40-E2-30-BF-F0-0D

  Modems are involved as much as I have the following (my apologies in advance, don't know how it's called technically, but it's the same one as in the photo):
  http://www.broadbandchoices.co.UK/guides/hardware/sky-broadband-routers

  I don't know if that helps, but also sometimes the connection does not appear in my list of connections, but it is very rarely, about 3 - 4 times in the last 2 days.

  If anyone could offer advice that could help I would really appreciate it and if someone needs additional information then please let me know (and possibly let me know how I could get this information).

  Thank you in advance for anything

  Hi all

  Problem has been resolved.

  Just in case someone else has the same problem, if you try to connect to a router and it communicates but don't connect does not then it might be a problem with the frequency to which you are trying to connect.

  In this case, my laptop could connect only to a 5 GHz frequency but my router was capable of a frequency of 2.4 ghz, so he was able to connect to all the rest but not that. (Particularly if you use a hub SKY).

  The problem has now been resolved by buying a wireless adapter card that plugs into the USB port. If you don't need to buy a Please make sure that buy you one with dual band capabilities.

  I hope this helps someone in the future!

  Best regards

• HP envy laptop laptop 15-ah150na: loses the connection to the wireless network device I had not only portable for 2 days

  Loses the connection to the wireless network sometimes directly after that the computer is turned on at other times after 5 min and sometimes after an hour.  No other device I have loses the connection to the wireless network.  Help, please.

  Hello @fairgame,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the WiFi and wanted to help you!

  First of all, try to review the next steps, offered by community member @Great-Christine-Tree:

  First of all, we have a step by step guide to guide you through the process of diagnosis here:

  HP PC - troubleshooting Internet and wireless network

  A second option is to try the following steps:
  Powercycle the network:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.

  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet

  So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.

  I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.

  All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.

  This printer makes me crazy - please help

  Hi @mastersword64,

  Welcome to the HP community!

  I hope you have a pleasant experience with us.

  I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.

  Here are some steps, I suggest trying to get your web services up and running it again:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser on your computer.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select network address (IP)

  6. Select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply. You can get a warning simply select OK.

  Please reply to let me know if these steps resolve your issue.

  Good luck!

  

• Wireless devices cannot connect to each other using the router EA6900

  I use the 2.4 Ghz network and none of my wireless devices are able to communicate with each other...  I could not connect to a wireless printer to my laptop wireless (through the router) and thought it was unusual.  I tried ping does not work either.  I then plugged a cable ethernet to the laptop and could ping the printer wireless without a problem.   I tried other devices (wired and wireless connections) and it seems that no wireless device can ping any other wireless device.  If, however, one of the devices is connected, it works fine...  All wireless devices to connect to the router and internet without problem... It's just when they try to communicate with each other.  I have experimented with the desktop using the ethernet adapter, then the wireless adapter... same results.  My wireless using my previous router devices could communicate with each other.  It's almost as if this device has insulated AP running if this so-called it doesn't support that.

  Customer service said: I'm the only one with this problem.  Does anyone else have this problem?

  I have an ea6900 and it works fine for me. Sounds almost like you are connected to the guest network which would be sort of this way. Did you do a power reset? It has never worked? Try to remove the power and back to see if it clears up it.

• HP ENVY laptop model m7-j020 d: unable to connect to the Internet

  I have a HP ENVY 8.1 Windows running.  No problem until a few days ago, when I couldn't connect to the internet (no e-mail link or a browser).

  Wireless and ethernet connections seem to work. I can connect to the internet via another PC, smart phones, etc.

  E-mail started acting erractically. I tried to restart the computer, and then he started to install updates.  Not sure if she did because it does not connect to the internet.

  Based on the suggestions of another post, I tried: flushing the DNS, reset the battery TCO/IP and resetting the catalog.

  Restart the PC without installation updates has not improved the situation.

  Any help would be greatly appreciated.

  flynkites

  Hello @flynkites,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about how you are unable to connect to the Internet on your laptop, and I'd be happy to help you in this case!

  Since you've already tried the DNS of hot flashes, to reset the TCP/IP stack and reset the catalog, I advise you to follow the steps described in this document on the resolution of problems in Internet Explorer (Windows 8), as well as resolve and prevent viruses on your computer (Windows 8). This should help you to access your browser and e-mail on your desktop.

  If the problem persists after completing all the steps in the above resources, please contact our technical support by clicking on the link below to get help from your region number.

  www.HP.com/contacthp/

  I hope this helps!

  Concerning