HP Logo change

Similar Questions

• Logo change?

  Hi all
  
  R12.0.6. in the login page how do I change the newspaper oracle to custom company logo?
  
  Baskar.l

  Belot,

  Please refer to these documents.

  Note: 551795.1 - how to change the default image on the home page showing as 'E - Business Suite'?
  Note: 395445.1 - Oracle Application Framework profile Options version 12
  Note: 421636.1 - how to replace the default Logo Oracle with a custom Logo?
  Note: 459350.1 - R12 - size Image on the Page of connection problem

  Thank you
  Hussein

• Direction of scrolling logo change?

  I have a logo in the middle of the home page and game to 0 scrolling movement. So, it has essentially pinned effect when you scroll. I have the menu bar, the value of scroll upward and the park itself at the top of the page. I'm trying to get the logo for "a ride" with the bar menu as it it scrolls and also Park with the MenuBar at the top of the page.

  How can I get the logo which is scrolling 0 to start immediately scroll upward in a specific location, in order to "attach" itself to the menu bar?

  Any ideas on how to achieve this effect?

  any help?

  Thank you...

  J.

  Hello

  Yes, you can get this scrolling application of the logo on the page with the Menu, go.

  Installation of scroll must be as the scrolling logo should begin after the menu, go and try to quickly scroll through menu more than the menu scrolled to the top of the page length, but that the logo is already on the middle position of the page, then it must correspond with menu, go to respect when Menu move on then scroll should start for the logo on the page.

  For example:

  Page length is set to 1700

  Menu is set at 1600 with about 270 px in position to begin to scroll with a top speed of 2px

  Logo on the page is to 850px on the length on the page, scroll in 400px with a lower frame rate while it should catch up with the Menu when the page touches the edge of the browser.

  I hope this will give you an idea.

  I created a sample site for you, download from here showing how this can be achieved:

  https://www.dropbox.com/s/fst0kkvc0v2hk0g/scroll.Muse

  In addition, through these tutorials:

  http://www.Adobe.com/inspire/2013/06/Muse-Parallax-scrolling.html

  http://helpx.Adobe.com/Muse/tutorials/scroll-effects.html

  http://www.YouTube.com/watch?v=irxPibsSg0k

  Thank you

  Sanjit

• Satellite Pro M70-113 does not start up - it hangs at the logo screen

  Hello

  I have a toshiba satellite pro m70-113.

  Sometimes when my laptop turns off mode standby automatically, due to inactivity and then if I press a key on the keyboard to wake up nothing happens and I have no other choice but to it stop completely by pressing the button for 5 seconds.
  But when I restart it works well, that is to say, it starts very well.

  But today, when it is in a similar situation, I restarted the laptop, the screen move after the logo screen toshiba. I have the power on several times, but without success. It crashes just on screen toshiba logo.

  After a few restart I pressed ESC while restarting and the toshiba logo changed to the texts POST bios screen.
  And I found that the text will not go forward after having reached:
  Find disk 0:
  Maybe default feel HDD initialization...
  The captured image is here:
  http://img144.imageshack.us/img144/9986/image007sp2.jpg

  Note: this is a capture when, I don't know how the system has just begun works very well and can be seen that the HARD drive is detected normally this time. While the earlier version, it will not proceed after having reached "Found Disk 0:

  So, the problem is that at the time of the problem, the hard drive was not read / initialized or something like that.

  And I remember that when I tried to reboot my laptop and it did not work. It was running on battery and when I switched power supply that worked.

  So it is a problem that has been fixed in a bet to update BIOS, but for another laptop (see laufendspass post) his link on this forum is here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13143&MessageID=48143

  And my current bios version is 1.1 and an update is available for v1.30... (But I have not yet updated)

  Another problem I had met some time was same this post mentions to be corrected during the update of the bios.
  i.e. "corrected: a computer that is turned on to State power and running on battery power, may crash if the user is connected to the AC adapter while it is start.»

  So, for this, all mean that these problems can be solved by an update of the bios v1.30 which is available for my Satellite m70-113?

  Please answer.

  Hi Ashish,

  The fact that the initial POST process cannot access your hard disk suggests you that there is a possible problem with the drive, maybe he is not in place correctly when power is applied to it. The contents of the disc should be OK, then I suggest you take a good backup of your system (or at least your personal data) If you manage to get your notebook to boot successfully.

  I do not think that an update of the BIOS will affect any on that since the problem does not seem to have a certain 'trigger', and if the BIOS cannot access the hard disk then no matter what version of BIOS you are using.

  Kind regards

• Why the icons Adobe Flash has changed to dark brown in my Win7 PC, but they are still red here. It of official, or can it be a bug or malfunction? Thank you.

  I've known it for the past two weeks. I have received no official notification about this ' n that is why I ask. Thanks in advance for any kind of comments about this issue. (Acrobat P.S. logo changed too much color)

  Yes, it seems that is what these icons look like these days

  

• Displays a Logo and a text

  Hi all

  Can someone tell me how can I display the Logo and text in my application?

  I need my logo to display on the top-left corner and my text that will be displayed in white with font big and fat at the top in the center of my page.

  Kindly help me Experts...

  Thank you and best regards,

  Madonna

  Madonna says:

  Is it possible to have my logo and the text in the user interface settings?

  Thank you and best regards,

  Madonna

  Select the Type of Logo, textand try this in the property of Logo (change the img src URL to reference your logo image and 'Text' to any text you need):

  Text

  Cannot test in Firefox right now, but it works in Chrome.

  However, note that an image of this size (assuming that 78 * 118 is width × height) then the page header in the 20 theme to exceed the size of the background image that gets tiled in a messy way. You could also hit problems if your application uses the region 6, 7 and 8 positions. That's why an example on apex.oracle.com exactly reproduce your installation is recommended in these cases.

• How can I change the color in this 'pieces '.

  Hello guys, I'm new to the forum and I am looking for help.

  I use a free template I downloaded from

  the internet, but I'm having a little problem.

  When I put the logo I want to use in the model, the color is not the original one,
  After a few minutes, trying to figure out how I could change it to the original version of the logo, I found an option 'fill' with a color that I could change...
  the problem is that when I change the color, all logo change at the same time, so I created 2 logos... an a while with the dark color and the other with red color

  so with this method, I could change the two colors on this "fill" option, and everything would be okay.
  the problem is that both logos evolve at the same time.

  I need to change the X RED and black motorcycle

  Another problem I have is: small pieces of the logo which all come together, they are all black... and I need to change it to the correct color.
  cause the text are in one color and the pieces are all black.

  

  Can you remove the background in one of the compositions and place the two compositions inside another new computer?

  Without seeing the actual model, it is not easy to troubleshoot...

  In the future, it will be much less frustrating for you if you take the time to learn the basics of AE. I would say this: starting After Effects

• change the oracle application log

  Hello
  
  Can someone tell me how to change the oracle application logo

  Hello

  Please refer to this topic.

  Logo change?
  Re: Logo change?

  See also the old sons of similar disucssion.

  How to change the logo
  http://forums.Oracle.com/forums/search.jspa?threadID=&q=how+to+change+logo&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

  Thank you
  Hussein

• Logo for Discoverer Viewer

  Hello
  
  When we place a Logo on a workbook in Discoverer Desktop, it becomes a workbook logo that would not be visible in either more or Viewer.Whereas when we place a Logo in Discoverer Viewer by using Application Server Control(Discoverer_Home_Page).it automaticcay the Logo change in Discoverer Plus also. Is it possible to get the Logo exported in the output (only for the PDF) when we export.
  
  Rgds,
  SAI Srivatshav

  Hi Sai
  No, this is not possible. The logos that have been added for more or viewer are not logos workbook but the logos of system that allow you to display your company on the toolbar logo. These are not associated with a workbook and so cannot be exported.

  I know that Desktop has this ability, but Oracle removed this feature when they introduced the web version.

  Best wishes
  Michael

• HP Pavilion 15-n278sa Downgrade

  Hello

  I have a hp pavilion model 15 number n278sa

  HP pavilion 15-n278sa

  I have windows 8.1 pro, but I prefer to install windows 7.

  I updated my bios and booted from a USB windows 7 that works.

  I went through the first step of the installation where windows 7 transfers all files.

  When I boot on windows 7, it does not come with the second stage, where the installation program

  dump it all. It just happens with the logo windows and then it kinda mess up grpahicly

  where the logo change contrast and logo gets spludges colour attached to them.

  I know that sounds wiered! but no help? I really want Windows 7 instead of windows 8.

  WARNING *.

  HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer is not eligible for Microsoft's Downgrade rights. You can buy a copy of Windows 7 with a valid COA and the product key.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install from a USB key and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '. This should clear up the CD/DVD device is missing.

  

  In addition, as the hard drive is probably partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  From the top...

  (1) turn on the computer and immediately start typing the key "ESC".

  (2) when the MENU is displayed, press "F10".

  3) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

  4) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

  5) press "F10" and click "YES" to "Exit Saving Changes".

  (6) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

  (7) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.

  (8) to turn on the computer and immediately start typing the key "ESC".

  (9) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

  (10) select "Language", "time / currency ' and 'Keyboard' settings and then click"Next ".

  11) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

  (12) you may need to provide AMD SATA/RAID drivers at the moment... Download the Drivers of the AMD Chipset (Chipset, SATA/RAID, USB 3.0) to AMD if necessary.

  (13) ' where do you want to install Windows 7? Select "Disk / Partition" with "Unallocated space", you created earlier, and then click "next".

  (14) follow all instructions and meet the need. Enter the Windows 7 key when asked.

  (15) please see the page of drivers PC laptop HP Pavilion 15-n278sa for 64-bit Windows 7 drivers.

  After installing the drivers, please post the "Hardware ID" Device Manager (text only) for all other devices missing or unknown as illustrated in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• How to get a curtain of parallax scrolling effect on single image (which is not part of the background)?

  I try to have a logo change the colors on some points on my page. To be more precise, I try to recreate what lenovo did on its website (www.lenovo.com).

  How would this create within the muse?

  Hi Jim,.

  To do this, you can create several logos with different colors and play with the opacity (scrolling effects) to achieve the desired result.

  Kind regards

  Akshay

• WebCenter content: login page

  Hi all
  
  Can I know what is the default page when I type http://xxx:16200 / cs.
  
  Also is it possible to change the default favicon and the logo on the page that comes when I type the url above
  
  If so, is it possible to do so without creating a custom component
  
  If the custom component is required may I know how to do it
  
  
  Thank you
  S. Andy

  I tried the portal.htm on the server edition, but the change is not stable. After some time, the logo changed to the default.

  Just out of curiosity, wasn't it after restarting the server? If so, I guess that there is already a component (maybe even a standard), which modifies the page and it refreshes your changes. In particular, it is easy to check - just to search for all occurrences of portal.htm and check what is the winner after a reboot.

  In any case, the thread contains a link to an article which in my humble opinion contains all the necessary details (including the model). If this isn't the case, share where you get stuck.

• New on Illustrator... I'm lost please help...

  All I'm doing is to manipulate our logo, changing colors. I thought that I thought about it yesterday but do not know what I did... I watched the tutorials and I'm still lost. I know you need to change the color of an object, select the object that your wanting to change. I can't find a way to do same

  Well it's just that if it is a sound image only on the room. You can not just color pieces because there is no pieces. You must live it trace or redo the shapes on top using the image as a model.

• Beginner's Guide to creating a new look of html

  Hello

  I managed to map all my styles in RoboHelp and unravel a major image problem

  in the latest version of the TCS. However, I would now like to produce my own appearance and html

  model. I have very little knowledge of javascript and I just want to be able to change the

  HR logo for my company logo, change the blue color to grey silver and some of the

  GIFs used to represent the search tables of contents, etc. Y at - it a tutorial, step by step anywhere that

  I can follow for this?

  Thank you very much in advance for your help.

  Best wishes

  Karen

  Sounds like a combination of aid and Rick skinny on skins is required reading. You can get the latest here.

• How can I change the "subject: House ' of the search engine home page and logo for Bing?

  I do not use Google as my engine of search if Firefox, so I went and changed the search engine of the Isard to Bing bar, but I can't change the "subject: House" of the Bing search engine. I would like for my Firefox display the logo of Bing and Bing instead of Google search. Thank you.

  See:

  • [/questions/779082 #answer - 286809]

  You can find the image data to Bing in this post on the forum.

  • http://forums.mozillazine.org/viewtopic.php?p=11018123#p11018123

  Paste this code into Notepad (Web Developer > Notepad;) SHIFT + F4) and use of Execute > run

  • https://developer.Mozilla.org/en/tools/scratchpad

  SearchEngines = {Bing: {"name": "Bing", "searchUrl": "http://www.bing.com/search?q=_searchTerms_","image": "data:image/png;base64,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"}}
  
  localStorage["search-engine"] = JSON.stringify(SearchEngines["Bing"]);
  
  document.location.reload();