Directory Manager not grateful not subscribed

Similar Questions

• Error 2732 Directory Manager not no reprogramming

  has received an error message "error 2732 Directory Manager not no initialization" which attempted to install a speedlink driver package meant for 64-bit operating system. Any solution please

  Hi Siri,

  
  It seems that the software that tries to install on your Windows computer is not compatible with Windows 8. As referring to the Pilot of Speedlink for 64-bit operating systems (http://www.gnresound.com/professionals/fitting/SpeedlinkDriverfor64bitOS), it was only available for Windows 7 and Windows Vistadownload links.
   
   
  So get this program running on your computer that Windows 8 , you can try to install this program in compatibility mode with Windows 7 or Windows Vista.
   
  To change the settings for compatibility for this program, you can follow the steps on: make the programs more compatible with this version of Windows.
  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows
  
  Let us know if this helps you solve the problem.
  If you face problems more when working with Windows Mail on the Microsoft Community Forum.
   

• Directory Manager does not see SOME users

  Unity 4.04 SR1 on a CCM 4.12 for a reason any CERTAIN users are not in the Directory Manager.

  We put them as indicated, I tried to remove / save and re check / except that option.

  I confirmed the name DTMF in the Subscriber table is right, but it is not yet that users.

  any ideas?

  Open saweb to these Subscriber pages and make sure that they have a name registered.

• Protection of the system. Responding file or directory is not a reparse point: (0 X 80071126) if please close the property page and try again.

  Three weeks ago, I got a problem of compatibility with nero premium 7 that I installed it, so I had to remove my laptop with great difficulty! I tried restoring the system by removing, and it failed. Whenever I open the system restore, I get a message... "There was an unexpected error in the property page. "The file or directory is not a reparse point: (0 X 80071126) if please close the property page and try again. For the protection of the system disks can not be re-analyzed for the same reason.
  What is the problem and how can I solve it? System repair not even managed to solve!

  Hello
   
  We will first check if the system restore services are set to automatic and started. To do this, follow these steps.
  1. Click Start, type services.msc and press to enter.
  2. from the list of services, double-click Windows backup and Volume shadow copy services.
  3. in the Properties window, select the automatic startup type and click Start.
  4. apply the changes.
  5. try to open the system restore and check the result.
   
  If the problem continues, check if the system of protection is disabled. To do this, follow these steps.
  1. Click Start, right-click computer and click Properties.
  2. click on Protection of the system under tasks.
  3. on the System Protection tab, be sure to place a check mark under all available disks to enable system restore or to market.
  4. apply the settings and check the result.
   
  For more information, see this link: http://windows.microsoft.com/en-us/windows-vista/System-Restore-frequently-asked-questions
   
  I hope this helps.

  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Directory does not exist

  Hello

  I use the 11i on the 9i database application. I tried running autoconfig on the layer of apps. I navigate to COMMON_TOP/admin/scripts/bdev_oraapps

  and ran auto config

  [applpdev@ebs pdev_oraapps] $./adautocfg.sh after having entered the password it shows error error: directory does not exist.

  I don't know what is the cause. Please help to get through this.

  Why the AU_TOP should be changed?

  Did you edit the file manually or using Oracle Applications context Manager Editor?

  Change the backup AU_TOP to its original state and try to run adautocfg.sh

  Read the MOS notes

  AutoConfig FAQ (Doc ID 218089.1)

  Customization of an auto-configuration environment (Doc ID 270519.1)

• Toshiba 1 TB Store 'cannot copy '. "the file or directory could not be created.

  I am trying to transfer a little less 5 GB 36 996 zip data files on a network drive on my brand new Toshiba 1 TB drive. I created a directory "E:\TOSHIBA\2008-Dec" in the root but only 16386 files copied. If I try to copy files over I get windows error message "Failed to copy" "file or directory could not be created.

  Obviously the disk space should not be a problem. Any ideas? Thank you.

  What happens if you try to copy another file on the HARD disk that is larger than 5 GB?

  What file system you are using on the external HARD drive? Maybe you should try to reformat to NTFS.

  In addition, you should try another cable.

• I signed up for Apple music and since then I can't synchronize playlists from my computer to my phone because it says I have iTunes game turned on, but I do not subscribe to iTunes recently Match (ish). How to make this stop?

  I signed up for Apple music and since then I can't synchronize playlists from my computer to my phone because it says I have iTunes game turned on, but I do not subscribe to iTunes recently Match (ish). How to make this stop?

  Hello

  You cannot synchronize in usb or wifi if you subscribe to the Apple's music. The basic principle of the AM is that your iTunes library is scanned to determine what can be matched or must be downloaded. Once completed, all the music you will be available to listen to or download on your iOS device.

  Jim

• Domain Services Active Directory could not create the ntds object due to dns settings look for failure on the specific domain controller

  Forest consist of 1 DC server 2003 with all fsmo and 2000 1 domain controller roles.

  Completed all questions of adprep and when I tried to promote server 2008 standard edition to a domain controller, had the error message stating that Active Directory could not create the NTDS settings for the domain active directory CN = NTDS controller

  Settings, cn is 2k8dc1, cn = servers, cn = Default First Site Name, c is Sites, cn = Configuration, dc is Marie-France, dc = com on the ad distance dc server2.amanua.com.

  To ensure that the provided network credentials have sufficient permissions

  "The DSA operation unable to act because of the failure of the dns lookup"

  The idea was to demote the 2000 machine when I completed the installation of 2008.

  Hello

  You can display the query in the link provided to improve assistance:
  http://social.technet.Microsoft.com/forums/en/categories/

• Error message: "the temp"e:\random number\cygwin\tmp\"directory is not a valid directory. Cannot install Visual C++ express 2010.

  Original title: cannot install visual c++ express 2010.

  When I ran vc_web.exe, I got this error message: "the temp"e:\random number\cygwin\tmp\"directory is not a valid directory. Implementation cannot continue. "Can help to solve this problem? Thank you.

  Hi moyeh,

  The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

  http://social.msdn.Microsoft.com/forums/en/Vsexpressvc/threads

  Hope the helps of information.
  Please post back and we do know.

• Error "0 x 80070091: the directory is not empty ' when I try to delete a folder on my external hard drive

  Original title:

  When I am trying to delete a folder on my external hard drive I get the error code following error 0 x 80070091: the directory is not empty

  Hello

  1. are you having the same problem even if you connect the external hard drive to another computer?

  2 have you made any changes to the computer, before the show?

   
  Method 1:
   
  Start your computer in safe mode and then try to delete the folder.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Method 2:
   
  Appropriating the folder and then try to delete it.
  Appropriating a file or a folder

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

   
  Note: The link above also applies to Windows Vista
   
  Method 3:
   
  Check the external hard drive to find errors.
  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: While performing the check disk on the hard disk, bad sectors are found and if he's trying to repair this area, all available data on the risk of being lost.

• Printing problems, when I go to search for a printer in windows, it says domain services active directory is not available

  My printer does not print. I rebooted the printer, but I still can't get it to work. When I go to search for a printer in windows, it tells the domain services active directory is not available.

  Hello

  1. is the computer connected to the domain?

  2 did you change on your computer?

  3. What is the brand and model of the printer number?

  4. is this a network or connected via USB printer

  Method 1:

  I suggest you follow the link and check.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  I also suggest you to follow the link and check.

  Solve printer problems

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-printer-problems

• When I look for a file in Win Explorer, I get a list of files in the search results. But some of the files seem to be missing. I get a message that the directory is not found when I try to open the search results.

  I wonder if what's on my hard drive and if what Win Explorer is on my hard drive are two different things.

  If I do a search in Win Explorer to "purple", I get a number of results.
  (To search for a file, I am in the word "Purple" in the search field in the upper right Win Explorer and pressing the "Enter" button).

  There are a couple of JPG files that I wonder about the search results.
  One example is called "purple_flowers.jpg".
  When I double-click this file in the search results to open it, my paint program opens and gives me a message that the directory is not found. If I use MS Paint to try and open it by double-clicking on the file and selecting "open with...". MS Paint", I get a message that the directory is not valid.

  The location of the directory on the error message is the blue 'Images' folder for my user. But, when I opened this file, I don't have a file with that name in this directory. The same thing happens with another JPG file, called "octopus.jpg" when I search the word 'Octopus '.

  Is this something messed up between what I have on my hard drive and think what Win Explorer is on my hard drive?
  How can I fix?
  Something must be reset in Win Explorer?

  I could have the JPG files with these names at the same time. I had a large library of images for a project, but I deleted it.
  (I tried to turn on the option to show hidden files in this directory, but that did not help).

  Imane:

  I thank very you much for that answer.
  But it seems to have stumbled on the solution:

  Strangely, this worked:

  (Maybe you know why).

  I moved the files in my blue images folder in another folder, delete the folder images blue, emptied the Recycle Bin and rebooted my computer.
   
  When my computer has finished its startup routines, my folder of photos blue was there! And he had the shortcut to the folder 'Sample Pictures' inside.
   
  When I searched "the Octopus" and "purple", I no longer saw these JPG files in the search results.
   
  I don't really know what happened, but I thought that after these results just in case someone else knows this.

  I'll read and watch in your information. I don't want to know more about what is happening in my computer.

  Marz

• error packaed and launch: Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path:

  Hello

  I get this error when you try to run the sample of cards on the corrugation Simulator:

  Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".

  The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged.  With the help of Mac, the latest versions of everything.  The application runs in undulation ok, but I can't throw on the SIM BB10.

  Someone else have this error and know why?

  PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?

  PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged.  I guess it should not but leaves me clueless as to whats wrong with cards.

  Thank you

  The two directories (in the extensions directory and maps project directory) have permissions to 777.

  But you gave me an idea...

  It turns out that simply by putting

  "Packages".

  in setting output wasn't enough, I need the full path

  for example: "/ Users/username/RippleSites/Maps/packed."

  and presto, now it works!

  Thank you!

• Seagate has save more - cannot delete the file. Error message "error 0 x 80070091: this directory is not empty.

  Hello

  I'm under win 7 and the use of seagate backup more

  Is there a file I want to remove my external backup and can't.

  I get the following error message:

  error 0 x 80070091: this directory is not empty

  any ideas on what to do?

  Brian,

  I only see the answer from here-

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-0x80070091-the-directory-is-not-empty-while/8c58e1d9-B6F2-4164-8fa6-19f35c09ea3d

  Note: Running Chkdsk is risky and may lead to a situation of starting no. You may also lose data in the process. Proceed at your own risk.

  We know if that helps you.

• Error 0 x 80070091 directory is not empty fix does not

  I can't delete some files from my drive and I tried the solution listed here, that does not work http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/error-0x80070091-the-directory-is-not-empty-while/8c58e1d9-b6f2-4164-8fa6-19f35c09ea3d

  Hello

  1 are the files on the internal hard drive or external hard drive?

  2. what happens when you try to delete the folder?

  3. do you get an error message?

  Method 1.

  Start the computer in safe mode and check if you are able to delete the folder.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Method 2.

  Why can't I delete a file or a folder?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-delete-a-file-or-folder

  Method 3.

  You can try to take ownership of the folder, and then try to delete.

  Ownership of a file or a folder: http://technet.microsoft.com/en-us/library/cc753659.aspx

  Method 4.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free. Once the computer is virus-free, try to delete the folder.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps.