Directory Manager does not see SOME users
Unity 4.04 SR1 on a CCM 4.12 for a reason any CERTAIN users are not in the Directory Manager.
We put them as indicated, I tried to remove / save and re check / except that option.
I confirmed the name DTMF in the Subscriber table is right, but it is not yet that users.
any ideas?
Open saweb to these Subscriber pages and make sure that they have a name registered.
Tags: Cisco Support
Similar Questions
-
The CC extensions Manager does not see .mxp
I can't open .mxp in the CC on Mac OS 10.8.5 extensions Manager. The CC extensions Manager does not see the files.
I did the update and all the steps: http://helpx.Adobe.com/Flash/KB/install-extensions-Flash-Professional.html
CC extensions Manager can't mxp extensions that have some limitations and have been deprecated in CS6. You must use the CS6 extensions Manager to convert the mxp zxp extensions extensions. There is a menu item for it. If you have not installed Extension Manager cs6, you can get it from http://www.adobe.com/exchange/em_download/em6_download.html .
-
The extensions Manager does not see Adobe Photoshop CC 2015?
The extensions Manager does not see Adobe Photoshop CC 2015. All applications using ustanovliny creative cloud
That's right, that it is no longer supported. Please refer to this article: Adobe Exchange
-
Went to Device Manager. It shows my laptop integrated webcam and shows my printer/scanner "cameras". But it does not show the built-in webcam of the independent monitor, and I can't find how to get the Device Manager to see the device. Help!
Hello
Dell should have drivers and the control software available on their site. Please refresh your
If possible driver and reboot before you load the new driver.Dell - drivers
http://support.Dell.com/support/downloads/index.aspxHelp generic camera:
Control Panel - Device Manager - click anywhere in the box of white/white - then VIEW - Show Hidden
Devices - look everywhere except IMAGERY for your camera and if found right on it - click UNINSTALL
-REBOOT.Control Panel - Device Manager - click anywhere in the box of white/white - then ACTION - Scan for
Hardware changes. If that detects your camera, then load and restart.Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
will update the driver stack. While there or not the USB update, then go to DELL and
Download the latest version of the driverControl Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and the method of Vista is identical
http://support.Microsoft.com/kb/310575Now, go to the system manufacturer (Dell) website and download the latest driver for the camera and the other related camera
software (if not more recent get the same).Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlThen let windows updates on however prevent loading of drivers who are often older than the
those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Please check with Dell Support and forums for help and known issues:
Dell support
http://support.Dell.com/Dell forums
http://en.community.Dell.com/forums/
I hope this helps.Rob - bicycle - Mark Twain said it is good.
-
The extensions Manager does not see the 2015 Photoshop
I tried to reinstall both the result of the previous
I found a solution that worked for me.
- Reinstall CC 2014.
- Once CC 2014 is reinstalled, Adobe Extension Manager sees this product and can install the plugins in this version.
- Their presence in 2014 CC makes them available to CC, 2015.
- I heard that Adobe technical support recommends the same thing.
- Adobe has a Web site on how to reinstall CC 2014: https://helpx.adobe.com/creative-cloud/help/download-install-app.html. Click on the link 'Install previous versions of the applications' to access this section of the page.
- Once CC 2014 is reinstalled, it might be useful to check to see if the extensions manager sees it as a product in the left column. If it does not appear, try to do a cycle of removal/installation of your "My Add-ons" section of the Web Adobe AddOns site.
-
HP Pavilion 17-e049wm Device Manager does not see the amd radeon 8650g card.
Windows 7 can not find the graphics card for the amd radeon 8650g. I tried to install the drivers from AMD and they never appear in the Device Manager. It only gives me "Standard VGA Graphics Adapter." Windows Update will not update. They say that it is current because it cannot find the radeon 8650g. AMD Setup never shows the driver file during installation. It installs all sorts of other things, but never the driver. As if it does not find material.
What is going on.
Hello:
Your laptop is not supported by HP for Windows 7. There is no graphic drivers for W7 for it to HP.
My only suggestion is to try the graphics drivers from the Lenovo G505s
http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS035764
-
Packaging in InDesign gives error Plugin Adobe Extension Manager does not see
I have an old file Indesign which formerly FontReserve.
It is no longer installed and has not been for 3-4 years
I'm unable to package a file without the plugin error saying it can't find the font reserve.
It does not appear in my Adobe Extension Manager CC application referred to in one of the programs listed
How can I get rid of him
Thank you
Peter
moving to InDesign support forum
-
Satellite A200-1HV: Wi - Fi connect WinXP manager does not see the WLAN
Hello from the Russia, I'm really sorry for my English.
1st. A200-1HV, bought with vista home premium. But I have too many problems to work on vista, and I write the new version of the BIOS (download from the Toshiba web site) to my laptop. (new version of BIOS = Bios for Win XP).
After that, I install WinXP SP2 32 Bit. All good, but: after crash, Manager of Win XP WiFi standard do not work.
But Intel PROSet / Wireless works, but for me, this tool are not good.I try to fix this myself, I manually remove the driver of wi - fi card, I manually give IP to my Wi - Fi, but unresolved problem = (Wi - Fi Manager standart WinXP can't see my home network wi - fi, * he don't see *!)
But intel Proset wireles see and correctly connected to them.
What should I do? I don't forget to set the switch Board-top of the laptop. I turned off the sound, but no result.Regards JIABP.
Some screenshots:
http://i046.Radikal.ru/0805/BB/d02c8ffb854f.jpg
http://i018.Radikal.ru/0805/F4/da52aa3d2e1e.jpg
P.S. I connect to internet, it: laptop over wi - fi to connect to Access Point Dl-kink DWL-2100AP-DWL2100AP thruoght wire connect to the PC, PC, connect to the internet.
Maybe this information will help solve the problem.
Have you installed the SP2 and SP3 on your laptop?
Have you tried to connect to the router without using WiFi encryption settings?
Check it!
-
Windows 7 does not see some games or DVD discs in my DVD - RW drive
I'm using Windows 7 Home Edition premium for my office, and all of a sudden she refuses to see my game or DVD discs when I put them in the drive. He will see my DVD - RW discs, but nothing else. The games I ran before with no problem at all, and drives that I'm trying will play fine on my Windows XP laptop, so I'm not sure what has changed to make it act like this.
It looked like from this, after that I burned a disc of pictures of family once, but I'm not positive.
I tried to uninstall the drivers for the DVD - RW, and reinstall, I don't know what else to do.
Hi Emiley Tomsen,
Please return to the article below and review the troubleshooting I would fix it myself :
http://support.Microsoft.com/kb/982116
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Host does not see some data warehouses
I add a new host in a cluster of ESX 4. ISCSI Storage Adapter on all hosts (old and new) detects all available Lun, 10 in total. However, 2 of the LUNS appear not in the list of data stores in the new host. Thus, guests see 10 stores of data. Guests are running live virtual machines that reside on the 2 "missing" data warehouses. The new host sees only 8 of the 10 stores of data.
I see the text "detected can be a snapshot" and "not open device"4c19dd2e-f64dfcc4-f94f-a4badb4fcdb6"to probe: no such target on the map.
"in/var/log/vmkernel. What to do with these averages of message?
4126) LVM: 7165: found device naa.60a98000572d4374433450444335486d:1 can get to be a snapshot:
18 June-15:47:28 corpesx2 vmkernel: 0:00:03:39.125 cpu16:4126) LVM: 7172: questioned disk ID:
18 June-15:47:28 corpesx2 vmkernel: 0:00:03:39.226 cpu16:4126) Vol3: 1488: could not open device "4c19dd2e-f64dfcc4-f94f-a4badb4fcdb6" to probe: no such target on the map
18 June-15:47:28 corpesx2 vmkernel: 0:00:03:39.226 cpu16:4126) Vol3: 608: could not open device "4c19dd2e-f64dfcc4-f94f-a4badb4fcdb6" open volume: no such target on the map
18 June-15:47:28 corpesx2 vmkernel: 0:00:03:39.226 cpu16:4126) SFS: 3702: pilot no. FS claimed device '4c19dd2e-f64dfcc4-f94f-a4badb4fcdb6': unsupported
June 18 at 15:47:30 corpesx2 vmkernel: 0:00:03:40.594 cpu2:4098) NMP: nmp_CompleteCommandForPath: command 0 x 12 (0x410007114b80) for device NMP 'mpx.vmhba1:C0:T0:L0' failed on the physical path 'vmhba1:C0:T0:L0' H:0 x 0 D:0 x 2 P:0 x 0 valid sense data: 0 x 5 0 x 24 0 x 0.
June 18 at 15:47:30 corpesx2 vmkernel: 0:00:03:40.594 cpu2:4098) ScsiDeviceIO: 747: command 0 x 12 for the device "mpx.vmhba1:C0:T0:L0" has no sense H:0 x 0 D:0 x 2 P:0 0 valid x-data: 0 x 5 0 24 x 0 x 0.
I see the text "detected to be a snapshot" and "Could not open device.
"4c19dd2e-f64dfcc4-f94f-a4badb4fcdb6" to probe: no such target on
adapter
"in/var/log/vmkernel. What to do with these averages of message?
It could be due to various reasons:
1. lost on the host partition table. Check with fdisk-lu < devname >
2 LUNS can be detected as snapshot. -> esxcfg-volumes - l should show snapshot volumes.
esxcfg-volumes - M < Datastore UUID >
This will force up the volume.
vmkfstools v
to refresh the storage.
then if all goes well, you should be good to go.
3. corruption of LUN. -> Please contact VMware support or support from the SAN vendor to fix it.
Please consider awarding point if this information is useful.
-
Is there a way to "TURN OFF" the concept of cloud for another user does not see a confidential pdf in their queue?
I tried to contact technical support to the 800-833-6687 but was put through several automatic guests and disconnected.
Hi plumasca,
Refer to this topic for help disable features/services online in Acrobat/Reader DC?
Kind regards
Nicos -
Satellite A100: Toshiba Power Manager does not work
Hello everyone!
I just installed Vista on my laptop (originally I had Win xp on it)
First I installed video drivers from toshiba.com
Then I installed the bios update and additional package toshiba.
But the toshiba Power Manager does not work!
Vista uses only its tools to manage the battery.
Can you help me?Thank you!
Why do you offer the Power Saver doesn t work properly?
You are getting error messages or what?The Toshiba for Vista energy saver is not the same as for Win XP.
You can find some additional options in Vista power options!There, you can choose between 3 different power option.
Choose one and click on the link below changes the power optionsThe new window should appear and you can click on change advanced power settings link.
In a new window, you can see the Toshiba Power Saver Settings.Good bye
-
The task in Windows XP MCE Manager does not load
original title: TASK MANAGER XP MEDIA does not loadwith xp media center, the Task Manager does not, subst, remove it won't open, right click on the bar of tasks does not open it why?
Hello
You are able to open the registry and gpedit.msc without any problem (start-> Run Type & -> gpedit.msc-> ok).
If yes then-> go to User Configuration model of administration-> system-> Ctel + Alt + Delete options-> double-click "Remove Task Manager" on the right side and select Disable-> Ok.
Try to see if it works.
-
I had my PC full of virus before, I had an antivirus and secure (cleaned) my computer.
The problem is - when I try to run the windows Task Manager, it just does not respond to click on it, I double click but it does not open and there is no erors sistem masages, it just does not open. I checked in the system32 folder, there is the "taskmgr.exe" but it does not work what I do!
What should I do?
can someone tell me what my problem is?
Renaming taskmgr.exe something else worked for me. The virus that was on my machine called 'Internet Security Essentials'. Its executable was in (Windows XP) Documents and Settings\all users\application data\d800ce\isd80_2112.exe. Although workaround for the task manager worked, Internet Explorer does not see the internet at present. The registry has been changed on this machine.
-
When I turn on my computer a warning appears indicating "delivery manager does not properly.
DEP original title: data
When I turn on my computer, a warning appears that says "delivery manager does not properly" and when I click on help and support balloon explanation is that my DEP is not configured correctly.
Then, after following the instructions and correct the parameters I restart my pc and still the same message appears.
Hi Olliewoods,
(1) since when are you facing this problem?
(2) what is you receive the exact error message?
An application installed on the computer may be the cause of this problem; I suggest you try the following steps:
Method 1: Put the computer to boot to determine which application is causing the problem.
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
Important: n ' forget not the computer to start normal follow step 7 in the link.
See the link below for more information on Data Execution Prevention
Data Execution Prevention: Frequently asked questionsThank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
---------------------------------------------------------------------------------------------------------
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Stop the Airplay due to the device (iPad)
I connected two Airport Express (the kind that plug directly into the wall jack) speakers. Both are extensions of my Time Capsule. The two have different names. From my iPad, I can choose either choose one with Airplay and plays music with one I have
-
Hi guys! I am writing here after many days of attempts without success... My request is 'simple', send data from the Panel of Labview RT within a DMA FIFO target host. Then the FPGA core receives data and imported through a knot of VHDL processes, an
-
Is a lighter version of Windows 7 currently available?
-
Hello gentlemen! I would like to know why the graphics card is not detected in my PC. The graphics card is 64-bit 1024Mo sDDR3 And the CPU has Intel I3, 6 GB ram -Installed the gpu -Start windows built in graphics -installation of the driver fails tw
-
Want to record meetings with a variety of participants and I wish I could have to transcribe speech recognition the minutes, preferably in Word 2010. Thanks for any help on this page or any direction, I might take to accomplish this task.