Disable a button until all the buttons clicked

Similar Questions

• Need to disable the button until all the elements of the array was posted

  Hello

  I get a lot of help from this Forum, thought about getting more out of it. I am very new to AS3 and to do my best to get as much as I can that are still a few problems to come through.

  I am trying to disable the button on a specific image until all the Clips of film in a table are bieng is displayed, otherwise it should show another clip from movie plurarite the message that all video Clips are not displayed.

  Here's the scenario-

  SUMMARY.

  There are three buttons on the stage, the next image button, button to load the 1st Movie Clip (note1), button to load the second film Clip (note2)

  I'm counting the Clips of film with the length of the array (I don't know if I'm doing things), but the idea is that once all the video clips are loaded, next picture button must be activated in the case otherwise he must remain inactive, rather would display another clip of film as notice that all Clips are not loaded)

  Here is my Code.

  import flash.events.MouseEvent;

  btnnxt.mouseEnabled = false;

  var note1:Mc_Notice1 = new Mc_Notice1;

  var note2:Mc_Notice2 = new Mc_Notice2;

  function next(Event:MouseEvent):void

  {

  if(Count.Length == 2)

  {

  btnnxt.mouseEnabled = true;

  nextFrame();

  trace ("mouse is on");

  }

  else {}

  btnnxt.mouseEnabled = false;

  }

  }

  notes of the var: Array = [note1, note 2, note3];

  var numbers: Array = new Array();

  btnnxt.addEventListener (MouseEvent.CLICK, next);

  btnload1.addEventListener (MouseEvent.CLICK, hearings1);

  btnload2.addEventListener (MouseEvent.CLICK, load2);

  function load1(Event:MouseEvent):void

  {

  addChild (notes [0]);

  Notes [0] .x = 100;

  Notes [0] there = 100;

  Count.push (1);

  trace ('Count' + count.length);

  }

  function load2(Event:MouseEvent):void {}

  addChild (notes [1]);

  Notes [0] .x = 100;

  Notes [0] there = 100;

  Count.push (1);

  trace (counting);

  count0 = 1;

  trace (count.length);

  }

  Please help in fixing this error that I do not receive the required results.

  Help, please.

  Best regards

  Part of the problem is that you try to count by clicking a disabled button to activate this button.  As long as the button is disabled you can not use it for himself.  Instead of adding an event listener to btnnxt immediately, just assign it when it is ready to be used.  Whenever you load you need to check the value of the counter and if it is equal to 2, then you can assign the event listener for the btnnxt.

  You do not have a (County) table for that since you're using only its length property... a simple integer value will suffice.

  As I do not see you create a variable named note3, you probably get an error for this.

  In your function load2 you always aim the remark 1 placement where it should be placed.

• Can you stop a user to move forward until all clickboxes one click if you use the PlayBar?

  Hi everyone, now I have a screen that requires a user to click on several clickboxes before the slide advances automatically.  Thanks to this forum it works fine.  However, with the playback bar they can simply click Next and continue this process. Is it possible to disable the next button on the playback bar until all the boxes in click are clicked?

  The deactivation is not possible, is to hide. You must use the variable cpCmndShowPlaybar of system. Its default value is 1 (visible). If you switch it 0, PlayBar is hidden. This can be done with an action simple (it is available in the drop-down list) to get to the slide where you want to hide the playback bar, you can do the same for the slide where you want to display again:

  

• How you can hide a button continue until all clickboxes are clicked?

  I've seen questions similar to this one, but none seemed to be the exact situation as mine.

  What I got: multiple images on a screen.  When a user clicks on an image, it is replaced by another image.  I use clickboxes for this task.  I do not want to switch back. Once they click on the original image, it should stay changed.

  What I'm doing: once that the learner clicks on images (in no particular order) continue a button appears that allows them to go to the next screen.

  If anyone has any suggestions on this subject please let me know, thanks.

  Is there a different click for each picture box? In this case, create a v_counter variable user, with a default of 0. Create a shared conditional tip action:

  1. Decision 'Always' which will be a standard simulated action like this:
     IF 1 is equal to 1
     Increment of 1 V_counter
     See the Imagex
  2. Decision "Checker" that checks the meter
     IF v_counter is equal to N (where N is the total number of images)
     See the Bt_Continue

  Apply this joint action at each click box, you will have only a "Imagex" parameter that should be tailored to the particular click box.

  If you have only a single click box, let me know. I responded with this workflow because you mentioned "I use clickboxes for this task.

• How can I turn off all the sounds click in CP7

  I don't know about the properties for each button and their definition apply no clicking sound, but there is a button next to the quiz results page, and I have no option to select no clicking noise in the properties of the button (using the slider of mast)

  I'm running out of options to disable the button click/click the button run 1.

  Thanks in advance... I have now that's dumb question... answer it will be quite simple, I can't see it right now...

  See you soon

  Sabine

  Hello

  Crushes the sound is to simply rename the audio file. Open the Captivate in Windows Exlorer Gallery, navigate to the Gallery\Mouse\ClickSounds folder and rename the Mouse.mp3.

  See if that banishes the click.

  See you soon... Rick

• "The connection has expired" continues to display until all the few minutes for a few min then I can surf again

  Three days 'connection timed out' appears all the minutes for any site I visit and then he disappeared and I can access the sites. I've tried everything described in Mozilla support on this issue as the browser any cookies and deletion history, flushing DNS, uninstall / removal of modules, Firefox update, uninstall and reinstall Firefox, etc, but nothing worked in all and now even after formatting my system, the error is still there.

  Everything worked fine before and what is happening in my pc only. In the laptop I can access any site at any time without a problem.

  Please help me.

  Disabling ipv6 did the trick.

• Is there a way I can make you so when someone is filled out a form to fill live they can't send it until all the fields are filled?

  I have a PDF document that is a form with a submit button. However, I'm not sure if I can do fill in all mandatory fields until they can push send. Does anyone know how to do this?

  Thanks in advance

  Hi strictlys32285696,

  Inform that you can set the fields as required so that the user cannot submit the form without having to fill in all fields (an error message will appear & empty required field is highlighted)

  Please refer to this article as well (key word: 'General tab of the properties of form field'):- PDF, Adobe Acrobat form field properties

  

  Kind regards

  Christian

• My menu has stopped working. I disabled add-ons, started in safe mode, disabled hardware acceleration and all the other suggestions but nothing helps.

  Everything worked fine until a few days ago. I tried all of the suggestions for similar problems, but the problem remains. I don't have the problem with Internet Explorer.

  I found the problem! It was my wireless mouse, who must be dying or something, although I remember a fall just before the problem started. In any case, after switching to my old mouse wired, everything is back to normal. I suggest that anyone else has the same problem first check their mouse.

• Audio is disabled... All the suggestions/help?

  Hello. whenever I convert an episode of a show like family guy, the simpsons and american dad, the audio is always disabled as you hear people before you see their mouths move. Someone else has the same problem or any suggestions on how to do to stop this. (Its the "rocket" BTW)

  It is a common problem, and it's not because of the "rocket of" or Sansa. It's the fault of the process. If you have an ipod or a zune or a rocket or any video player in this case. It is a sad reality of the way things are. I suggest that you try another like WinAVi converter to convert the file, and then use MSC to add it to your device, it may help some

• Disabled NAV buttons until all clicked - Cap5

  How to accomplish this navigation to heading5? "While clicking on each seven images revealed definition text in the center of the screen. Navigation buttons are disabled until all the images are clicked. »

  Ok.  You me ashamed inside...

  I mocked an example using three images with descriptive text captions.  (Three should be enough to show how it's done.)

  http://www.Infosemantics.com.au/assets/testpit/Adobe/ToggleTextCaptionsWithClicks/ToggleTe xtCaptionsWithClicks.htm

  You can download the CPTX file for this example here:

  http://www.Infosemantics.com.au/assets/testpit/Adobe/ToggleTextCaptionsWithClicks/ToggleTe xtCaptionsWithClicks.cptx

• Hide the button until all Conditions are met?

  Please help!  I am creating a forklift safety training module. There are 12 buttons on the first slide (see screenshot 1); However, only 11 are visible at the beginning of the slide.  The 12^th button is a "continue" button that appears only after all the content slides (slides 2-12) were considered by the learner.  I used a conditional action to hide the button (something I learned from @Lilybiri) until all the conditions are met.

  
  

  The problem:

  The "Continue" button does not always appear once the content slides have been read.  I found I can do appear to ebb in each slide content, show the slides a few seconds more before returning to the main slide- which seems certain conditions which tells Captivate to display the button "continue".  Of course, I don't want the learners to face to the challenge of trying to understand why they cannot continue. I just want to visit the pages relating to each key to all conditions met.
  

  
  

  Screenshot 1: the initial screen (actions related to the change of color of button below)
  

  

  
  

  Screenshot 2: chronology of the page main interaction

  

  
  

  Screenshot 3: conditional Action to display the button CONTINUE (created as a decision 2nd out of action of 'Transport').

  My expectation was that OnEnter, slide would be recognized as read and count for the condition that all 11 pages of content would be considered before that appear the continue"" button.  I set the time to s 3.0 (see screenshot above) on all content slides.  No transition, no effect.
  

  

  
  

  Screenshot 4: each slide content is returned to the slide main interactivity by an OnSuccess: jump to the command of the slide.  Nothing special here.  I tried to reduce all the content slides to 1.5 s nothing works.

  

  
  

  Screenshot 5: an example of the page interaction BEFORE all the content slides were read and before 'CONTINUE' button appears (ignore the footer buttons; it was just me to experiment with styles of button).

  

  
  

  That's a lot, I know.  I wanted to cover the entire base.  I would appreciate your thoughts and your expertise.  Thank you in advance!

  
  

  Michael
  

  How about what is probably very close to what you have already made... (After double checking all of your shares advanced for bugs)

  Each main menu button sets the variable 'consulted' 1, hides the active button, show visited button, then jump to the content. Alternatively, you can put the action on the close button for each slide as you did.

  Then in your main menu, you will have the conditional action on enter that verifies that each variable 'seen' is 1. If it is true, then it will show your button continue.

  I use this method with almost all of the modules that are non-linear. I use it to display a button quiz start, tab summary etc...

  To check your programming that I'm down in a text caption that has all the variables, you will have to look and make sure that they change to 1 as it should. As soon as something does not change probably you have found your problem. Also make sure that none of your actions changed to continue if you have accidentally deleted an object or something similar.

  Also BTW: If you want to increment a variable, you use the action "expression" rather than "assignment." If you keep just assign 1 to a variable, all that you will ever get is 1. example: If the variable = 7 and you assign 1 then now variable = 1.  If you use the variable expression variable = + 1 then you will be able to increment. Also be careful if a user visits an article more than once because it increments the new variable unless you have a control to see if the content has been seen before, and then past increment. Otherwise they could visit the same section 11 times and then have the button continue become visible.

• How can I stop a slide until the user clicks a button?

  I would like to pause a slide until the user clicks on a button (that I created on a Smartshape). The thing is that I have not added a box of click on the smartshape object but have only together properties smartshape to 'use like Button '. If I add a clickbox object, I would get a ' project Pause until that the user clicks on ' in the section property options. However using a smartshape as a button, I can't find this option. I use 6 Captivate. It seems strange that I expect to see the same checkbox option, even if I had to use a smartshape as a button but I did not. Can't someone help me and let me know if I'm missing something.

  Of course, I could use a clickbox on my smartshape to achieve what I want, but I want to avoid this for two reasons:

  1. I want to avoid adding another object when I don't need.
  2. My smartshape is a right arrow (indicating 'Start'), and I'm not a square box sitting on top of a triangle, click because it shows just the hand pointer even if the cursor is not exactly on the arrow button as it enter the clickbox area.

  Thank you

  Sean

  Click the smart shape, go to properties > accordion Timing > Pause after and determine the number of seconds since the start of the slide to break him.

• In Microsoft 2010 how you open all the worksheets at the same time in a folder? 'Open all' is not an option on right click.

  I need to open a month with a value of Excel spreadsheets in a folder. The only way I can understand them open is to open one at a time. My old version of Microsoft has an option 'open all' when I highlighted all the & right click. This is not an option in the 2010 version. I can't imagine that this is not an option in the latest version. Am I missing something?

  Open Excel, and then click file and 'open '. Navigate to the folder containing your Excel files, and select all the worksheets, that you want to open. You can drag a rectangle around them, use control + click, or use SHIFT + click to select more than one. And then click Open. It should open all the excel files.

• Last update of Windows 7 is hidden or corrupt all the drivers of USB devices on my system.

  Automatic update of Tuesday last Windows 7 has killed the mouse USB and almost all USB storage devices that I use on the system. I tried several mouse and all report an error that it cannot find a driver now and that I should replace the unit. Microsoft mouse works fine on other computers - tried on three other machines, 2 running Windows 7 that did not update and a Vista running. All USB storage devices work on the other two machines. It seems that the last update has trashed the directory or the USB driver cache because the system can not find more.

  Tried to run the software "fix it" Microsoft with no luck. Also tried several other suggestions Microsoft forum without success.  I am a student and having papers coming due next week so need to fix this quickly.

  Hello

  (1) what is the Microsoft FIXIT you have tried to solve this problem?

  (2) who is the last (KB) update installed on your computer?

  (3) have tried to run the system restore?

  Method 1: Uninstalland reinstall the USB controller

  Use Device Manager to disable and re-enable all the USB controllers. This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

  To disable and re-enable the USB controllers, follow these steps:

  (a) click Start, type device management in the start search box and press ENTER.

  (b) expand Bus USB controllers.

  Note You need to scroll the list to find this point.

  (c) right-click the first USB controller under Bus USB controllersand then click Uninstall to remove it.

  (d) repeat step 4 for each USB controller is listed under Bus USB controllers.

  (e) restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  (f) check the USB device to see if it works.

  Hope this information helps.

• How can I delete all the music on my rocket drive using my computer?

  How can I delete all the music on my drive using my computer? I printed the user manual, but the statement is vague.

  Please help a frustrated old man,

  Thank someone who answers this time (even before ayone answers that I tend to forget to say thanks for the help)

  misterhy

  [email protected]

  You can (and should) get the free mp3tag: http://www.mp3tag.de/en/

  Install mp3tag.  When you install, let it be added to the context menus (an option during installation).

  Open mp3tag and in tools, Options, Tags, Mpeg do option Write ID3v2.3 ISO-8859-1. Those are tags favorite rocket, and once make you it by default, whenever you save tags in mp3tag you will get tags Fuze and respectful.

  Your albums may not be labeled at all, or may be marked in ID3v1, who will not read the "rocket". So he goes to the title, if there is a title tag or file name if there are no tags.

  You can now right click on an album folder and see mp3tag as an option to open it. When you click mp3tag, you'll see the files listed. Put them in order from top to bottom - you can try clicking on the header of the track-number or the name of the header file if they are 01-Track 1. If you can align them up and down, highlight all the and click Dial automatic tools Wizard with the option of leading zeros. Bingo: Track numbers 01, 02, 03, and they will play in the order.

  Sometimes people put numbers to track on the file names and they list in alphabetical order by song title - not good. If the "rocket" Impossible to find track numbers and the name of the file is FirstSongTitle-01 (rather than 01-FirstSongTitle), the "rocket" will play them in alphabetical order by name of file: FirstSong, FifthSong, FourthSong, SecondSong, SixthSong, ThirdSong. Then you will have to put in one of the track numbers.