Disable certain days in the date picker

Similar Questions

• Recurring appointment Set for certain days of the week each month in the calendar on Surface RT?

  It seems to me that this is not possible, but is there a way I can put a recurring appointment for a certain day of the week of each month in the calendar on the Surface RT? For example, a meeting Tuesday on two or one excursion each fourth Sunday?  I know that this is possible in Outlook on a PC and I would like to do it on the Surface RT as well.  Most of my recurring appointments are of this type.  When I recur every month on the Surface, it just sets it for the same date (for example the 12th of each month) instead of the second Tuesday.  Thank you!

  Hi Lisa,

  You were correct when you say that 'it seems to me that's not possible. ' The recurring appointment for some day of the week each month in the calendar on Surface RT cannot be done by date and not day.

  Good day!

• Change a chart value using the date picker

  Hello
  
  I use this code for graphical access
  
  Select deptnm in the Department, eqpnm as MachineN, Sum (Qty) as the amount of work
  where wrkrsltday like to_char (to_date(:P1_DATE), ' MM/DD/YYYY') and item_cd! = '9999' and slipnm! = "PayO" group of eqpnm, deptnm, eqpnm order of deptnm
  
  He works in the SQL command line.
  
  Here I give you the date in the format defined by the user to input.
  But after her run at race time on the date picker, I m selectind all daye is
  the message of no data found
  Guide me on...

  Hello

  I solved the problem; you need to enter P1_DATE in the field "Page to go". I just tested with a few dates - 09/11/2012, 09/12/2012 (I watched your work table to identify the validity dates) and it works fine.

  I changed the password of your workspace to test123.

  Thank you
  Rohit

• Place a value max and min on the date picker

  Apex 4.2

  I have a report interactive apex which is framed by a start_date and end_date a. We will call P1_START and P1_END. They are the two fields of date picker. Once the user selects a date, the report is updated accordingly display the results falling between the date ranges. Pretty sImple. As we know, the date picker has throughout the calendar year. Is there a way to limit the date picker to go only to come or already in a month? So if the user were using the application today, would later return they might choose 24/10/2013 and the furthest in the future would be 12 24, 2013, honorably.

  Any help on this would be greatly appreciated. Thanks in advance.

  Change your date picker control object

  Go to the settings section

  The value of minimum date to "-1 m".

  Maximum date "m + 1"

  Click on the legends of the attribute for more options.

• Disable text entry in the Date field

  I use APEX 4.2
  
  I created a form with a field Date with and Date to .
  
  I use the format of Date Picker (a new one, not the classic) and set the calendar to display on both (developed and click on icon).
  
  I would limit the field so that the user cannot enter any text - they can only use the Date picker/calendar to select a date.
  That would take them the clumsy edits - so I can restrict users so that they cannot enter an incorrect format in the first place.
  
  Is this possible?
  
  Amanda.

  Hello Amanda,.

  You can also implement this way.

  Change your datepicker element.
  Under the item
  In the HTML Form element attributes set readonly = "readonly"

  This your object picker cannot change dates, so you can't write anything on this field, you can enter the date using the date picker.

  Hope you help

  Kind regards
  Jitendra

• How to disable certain fields in the form of a calculation with a checkbox for the fields.

  How to disable certain fields in the form of a calculation with a checkbox for the fields.

  In Canada, we have taxes

  I create a form that allows them to calculate a total

  

  I need to be able to turn off all of those taxes to participate in the calculation and to their field visible should be 0

  I was thinking about using a check box (when the checkbox is enabled (Yes) the tax is calculated, unchecked (Off) the tax is not calculated and visible field should show 0 or anything...)

  I really need help on this one, I am a complete newbie...

  Note that the second tax is calculated on the sum of what the first tax Add (tax first is pan-Canadian tax (all provinces).

  The second tax is never only use (Quebec only (in addition to one Canadian)

  Sometimes to sell outside Canada - no tax at all is calculated...

  What should I do?

  Yes, it's just the JS...

• How do I put selectOtherMonths in the date picker?

  Is there a way to selectOtherMonths the value true for the date picker?

  Hello

  instead of adding your code to each page, create an empty region zero page and add your javascript code in the header or the footer of this region.

  This region will be rendered on each page.

  Kind regards
  Dirk

• JavaScript works well with the date picker

  I tried onchange and onblur javascript events in the field of the HTML Form element...
  they work great with text fields... but not with the date picker...
  It seems after that date is selected, javascript is triggered, but set to get pulls the value of the field before the date chosen in the selector is placed here...
  
  is it possible to get the event fires with the value of dates...

  Hello

  Check your sample now.
  I have put your function setStatus page JavaScript and Execute when the Page loads

   $('#P1_DATE_FINISH').datepicker("option",{
    onClose:function(t,i){setStatus()}
   });
  
   $('#P1_DATE_START').datepicker("option",{
    onClose:function(t,i){setStatus()}
   });
  

  You can also replace this with

  $.datepicker.setDefaults({onClose:function(t,i){setStatus()}})
  

  Kind regards
  Jari

  Published by: jarola December 14, 2010 16:28

  You probably like to have event onchange in the text field, so I change to

  $('#P1_DATE_START,#P1_DATE_FINISH').datepicker("option",{
   onClose:function(t,i){setStatus()}
  }).change(function(){setStatus()});
  

• Using the date picker, but can choose dates in the past

  Hi all

  I could have a moment really stupid and it could be very simple but...

  When you use the datePicker with POSITION I don't see a function to say you cannot choose a date in the past.

  Is there such an option or this code of conduct?

  I tried {NOW_DT} in the code, but that just gave me an error.

  Please let me know

  See you soon,.

  Joe

  The date picker doesn´t can limit the range of dates, but using the placeholder {NOW} for the current date should work in a form validation rule. {NOW_DT} means "date AND time" and this is probably not set respectively doesn´t is the type of the corresponding column in the table, who knows?

  See you soon,.

  Günter

• get more records of 30 days from the date of the day

  I use MS SQL 2000 How can I recover the data that are older than 30 days from the date of the day? I put currendate "DateTime" field as data type and length is the '8 '.
  
  < cfset variables.getdate = DateAdd (would be ',-30, now()) >
  
  Select dataname
  of tabletest
  where currendate > = "variables.getdate."
  
  the sql stmt above does not work.

  Select dataname
  of tabletest
  where currendate<= #createodbcdate(dateadd("d",="" -30,="">

  You say that you want records which are more than 30 days from now, so that it must be less than or equal to the date
  But if you want the Chronogram of 30 days there are until now then it must be greater than or equal to

  Ken

• In the date picker, how can I default to select * dates if the user has...

  In the date picker, how can I default to select * dates if the user does not select a date.
  Thank you
  Doug

  Doug,

  Now lets say l want everything
  

  Could you post some sample data and the output you want to get... ? It would be very easy to understand the requirements...

  When you mean everything, I guess you need all possible dates between date1 and date2.

  You can use... (to asktom.oracle.com).

    1  select to_date('12-jan-2009','DD-MON-YYYY') + rownum -1
    2    from ALL_OBJECTS
    3    where rownum <= (to_date('20-jan-2009','dd-mon-yyyy') -
    4*                     to_date('12-jan-2009','DD-MON-YYYY') +1 )
  sql> /
  
  TO_DATE('
  ---------
  12-JAN-09
  13-JAN-09
  14-JAN-09
  15-JAN-09
  16-JAN-09
  17-JAN-09
  18-JAN-09
  19-JAN-09
  20-JAN-09
  
  9 rows selected.
  
  For your case, since you have date1 and date2...
  
  select to_date(:p12_date1,'DD-MON-YYYY') + rownum -1
    from ALL_OBJECTS
    where rownum <= (to_date(:p12_date2,'dd-mon-yyyy') -
                      to_date(:p12_date1,'DD-MON-YYYY') +1 )
  

  Should work... in my opinion... Have not tested the other by their Summit.

  Is that what you're looking for... ?? If no, please give details...

  Thank you
  Rajesh.

• problems with the date picker

  I found some problems with the date picker to make my first presentation of object BPM.
  
  I created a group with a datetimestamp it contains. When I click on it in run mode, it will bring a new tab in the browser. This behavior is different from that of a date picker outside a group where there just a small javascript popup.
  
  Anyway around this problem?
  
  Also, would be nice if could be set by default to the current date. is there a way to who?
  
  For the component "time" it seems impossible to define the default value - at least on the tab object structure.
  
  Thank you

  Try to set the property "DHTML" to control date Yes. This option is under the Properties tab-> the calendar section. This will force it to use the popup javascript on screen instead of opening a new browser window/tab.

  To set a default value for a date/time, you can simply set the value in the constructor of the BPM object in which the property is located.

• Display a date only when it is a certain day of the week in BI answers

  Hello
  
  I'm trying to display a date, but only if it's a Friday in BI answers.
  
  So far, I have in the formula in the column:
  
  ' BUSINESS day of the WEEK ("calendar of MQ - delivered". "Delivered the calendar Date") WHEN "Fri", THEN "calendar MQ - delivered". ' "Delivered to the calendar Date" END of OTHER NULL '
  
  
  It does not display anything, but I know that there is Friday in date data.
  
  Any ideas anyone?
  
  Thank you very much
  
  
  Graham

  Because the condition is not good ;-)

  Try this:

  CASE WHEN DAYOFWEEK("MQ Calendar - Delivered"."Delivered Calendar Date") = 5 then "MQ Calendar - Delivered"."Delivered Calendar Date" else null end
  

  See you soon
  Nico

• SQL query for the date picker

  Page reports there are two 2 day points of selector (a datefrom and dateto a) as well as a text field with AutoComplete element
  
  When the page load query is called
  
  SELECT
  "COL1",.
  "COL2",.
  "COL3",.
  the "table".
  WHERE MYDATES BETWEEN: DATEFROM AND: DATETO
  
  Which returns no records as no dates have been set.
  
  How can I modify this search in the clause WHERE on the date element is called only when the dates are chosen, and by default, all the records are displayed.
  
  The other related issue is when I chose a from and to date and research when I return in the view page of report after consulting other pages in the application of the apex, the form fields are always met, how can I delete the session down for these fields when the user leaves the page?
  
  I hope that all makes sense?

  To_date('01.01.2100', 'dd.mm.yyyy')
  

  will give erroneous results on 02.01.2100 :D

  A solution (perhaps there's a cleaner...):

  WHERE
  ((:DATEFROM IS NOT NULL AND mydates >= :DATEFROM) OR :DATEFROM IS NULL)
  AND
  ((:DATETO IS NOT NULL AND mydates <= :DATETO) OR :DATETO IS NULL)
  

  You can change the message "No data found" by changing the attribute of report "when no. found data Message."

  EDIT: And for the 2nd question, Alex is right, but also be aware that Firefox retains the values of form element when the page refreshes, you must change the Security page 'Form Auto Complete' to 'Disabled' attribute if you do not want to keep the form element values.

  Published by: Yann39 on June 27, 2012 06:30

• my iphone 6 is disabled. can I recover the data

  my iphone 6 is turned off after that I entered the password OK 'evil' has little time. I can recover the data that I didn't use icloud or itunes?

  I searched on the internet and there are some applications that claim to be able to recover data lost on the iphone 6. These applications true or is it a case of me having to throw this phone and get an android who has all the drama of itunes and iclouds?

  most of these applications is authentic, but you must first unlock the iPhone...

  If you only enter the wrong password several times, wait until you enter the password again, and then put it in the correct password.

  If you do not or you have forgotten the password, there is no alternative to 'restore' the iPhone as a sense new, you lose all the data on it. When you have no backups, they will be lost for good.

  Here's how this (method 3 recovery mode):

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  After that, here's how configure the restored iPhone:

  Start with the iPhone, iPad and iPod touch - Apple Support

  Lex