Disable file sharing

Similar Questions

• BlackBerry Z10 disable file sharing

  My problem is that I use the wifi from my Office Server, when I connect Wifi sound automatically share my mobile files for all the LAN system. How to disable access or request access. Help, please

  You will do the opposite of what is noted in this digital to enable WiFi sharing.

  ****************

  Follow these steps to share files via a Wi - Fi connection for smartphone BlackBerry 10:

  1. Slide down to senior management
  2. Select settings
  3. Select it storage and access
  4. Turn access using Wi - Fi for the
  5. Type Identification on the network to check the network credentials (the BlackBerry 10 device name, username)
  6. From a Mac or Windows computer on the same network as the smartphone BlackBerry 10, access device matching the name found in step 5 in the section network devices or navigate to the IP address of the BlackBerry smartphone, which is located under settings > on > network > Wi - Fi.
     1. On a Windows computer, open the run (hotkey Windows key + R) and type file:\\127.1.1.1 or \\127.1.1.1 (where 127.1.1.1 should be replaced by the actual IP address of the BlackBerry PlayBook)
     2. On a Mac, choose go > connect to serverand type smb://127.1.1.1 (where 127.1.1.1 should be replaced by the actual IP address of the smartphone BlackBerry 10)
  7. Once the device is connected to the computer, navigate to the folder media (for local device storage) or removable_sdcard (microSD card storage) which contains several subfolders such as documents, music, photos, videos, etc., the BlackBerry 10 user can then move files between the computer and these folders.

• Cannot find or disable simple file sharing

  I am trying to load a Virus checker and keep from telling me I have to disable, simple file sharing, going to folder Option > view > uncheck! Problem is there is no box tht looks like to a file share.

  It is a netbook for samsung Windows XP. Are there other options to disable file sharing.

  Hi GarethOZ,

  Please see the following articles for more information on disabling Simple file sharing:

  How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP

  http://support.Microsoft.com/kb/307874

   

  How to use Simple file sharing to share files in Windows XP

  http://support.Microsoft.com/kb/304040

  Let us know if that helps.

• How can I disable the file sharing without Windows Firewall is turned on? (I use Norton 360 and he doesn't have two firewalls running at the same time.)

  When I go to the "network and sharing" and try to disable file sharing, it automatically turns on the Windows Firewall. I want to be able and disable file sharing and disable the Windows Firewall (I use Norton 360 firewall). Any ideas? Thank you.

  Hello

  Check this box

  How to enable file sharing enabled or disabled in Vista
  http://www.Vistax64.com/tutorials/126388-file-sharing-turn-off.html

  If no joy collate Support Norton/Symantec and Forums

  Norton support
  http://www.Symantec.com/support/index.jsp
  http://www.Symantec.com/Norton/support/DTree.jsp?PVID

  Norton forums
  http://community.Norton.com/Norton/?category.ID=NIS

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to disable the sharing of files between the host and guest XP PRO?

  Hello my setup is:

  Host of XP PRO and XP PRO comments using NAT.

  How to disable file sharing between the host and guest (do not want to view or access the file share on host comments)?

  In the comments

  I tried to disable simple file sharing in folder options and uninstall

  File sharing and printing of LAN properties but can always see and have access to the

  Organizing actions of folder...

  Help please!

  Then you will need to disable "Microsoft File and Printer sharing" or you need to set restrictions with the GPO. As long as the systems have their default values the value of a Microsoft network allows to use actions.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• need to disable simple file sharing?

  I have a hard drive of degeneration neurofibrillaire and I went in ' folder options > advanced options ' on an admin account and the simple file sharing to disable bullet isn't there, I went on my other computer and this is, any help is appreciated thanks

  I have a hard drive of degeneration neurofibrillaire and I went in ' folder options > advanced options ' on an admin account and the simple file sharing to disable bullet isn't there, I went on my other computer and this is, any help is appreciated thanks

  Strange, but this article states: Note you cannot disable simple file sharing in Windows XP Home Edition.

  How to disable Simple file sharing in Windows XP Home Edition

  How to use Simple file sharing to share files in Windows XP

• Windows Firewall 7. Disable and file sharing

  I have a program that is unable to work so that the firewall of windows 7 is activated. I tried to restore the firewall by default and repeatable to allow access to the program. I tried the more advanced options, and they still do not work. I have resorted to installing third party software firewall and this is, I discovered, I can not disable the firewall of windows 7 AND disable the sharing of files and network sharing.

  He is super bad design. I don't want a network share or sharing files on everything. What should I do in this situation?

  When I turn off the firewall turns these return options. I can always turn them off, but ever time I turn disable then it resets these settings. Is there a way to permanently disable such things via gpedit.msc for example

  Thank you

  I know that its virus associated, is the only thing that I have herd do, first the rootkit removal and virus, do a dirty reinstall... (which means keep your dirty previous installation files/programs) so far I have not found all the patches that work. I spend 8 hours post after that post and you are the first person I met who has EXACTLY the same problem with playing...

• Hide or disable the attach to email/file sharing

  HI - is it possible to disable or remove these for each user? We use Adobe Reader X, I read some articles that you use a JavaScript but those I found does not work with this version. Don't look like they can be removed either by using the register and same AppSense cannot block the two out. The reason for this is that it sometimes blocks Outlook to the point where you have to kill it in Task Manager.

  Disable the sharing feature by setting bEnableShareFile to 0.

  I don't know how to disable the function of an email attachment.

  HTH,

  Ben

• How to prevent file sharing automatic connection with the commune iCloud account?

  I have access to my Mac remotely and always assumed that if I did not check the box pw to remember when asking username/pw I would always need to enter pw to access a remote volume.  This, of course, is the case usually except that I noticed that I have three computers (home, office, mobile) with the same user name and I can connect to the remote volume by simply entering the IP address of the target computer. I receive no request for pw.  This occurs despite the Macs with different user pw. I went to keychain in public services and did ' t see the pw of file sharing, so I guess they are in iCloud keychain.  All 3 Macs have the same username and the same iCloud account, and I have iCloud Keychain selected on all 3 Macs.  Potential problems would be if someone stole my cell phone when I signed to or if someone at work was playing with my computer after hours - they can then access my home computer (or vice versa). If it is stored in iCloud Keychain, so I don't see an obvious way to change.  So I disabled the option of trousseau in iCloud in system preferences on my laptop, not saved in keychain to my Mac and restarted; When I tried to access my home Mac, it helped to connect without my pw but I have noticed that at the top of the window, text says 'connected as [email protected]'- real username omitted here.  Is anyway to avoid this short of having each Mac journal on an account different iCloud (then would lose Sync calendars etc.). Thank you

  What tool do you use to access other Macs?

  Built-in screen sharing?

  

• Windows Server 2012 Standard File Sharing - access denied?

  So I have a simple Pentium Dual core server here, and I'm putting in place local file sharing. For some reason any however I can't write files on the disk, even when you sign in as administrator of any computer in the network.

  I've been Googling the problem for hours and I found something on the deactivation of the audit, I did in secpol.msc, but I tried to disable it, and it will not always grant access.

  Is something directly above my head, or is it a problem in the file sharing himself?

  Sorry if I'm not providing a lot of details here, but I'm really frustrated about that. If you need any further information I'll post fortunately.

  Thank you for your time for reading.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Simple network file sharing XP Home Edition

  I have windows XP Home Edition 2007 Service pak 3. I can't share files on the network. In the network > tools > there is no file simple file sharing check box

  "Simple file sharing" is applied (always enabled) for Windows XP Home editions.  Only XP Pro editions can disable Simple file sharing.  This does not mean that you can not share files.  Generally, you share folders simply by doing a right click on a folder and selecting:
  Properties-> sharing (tab)-> share this folder.

  You must also have the file sharing and printer installed and active on your computer.  More about here:
  "You can not access the shared files and folders or browse computers in the workgroup with Windows XP"
    <>http://support.Microsoft.com/kb/318030 >

  HTH,
  JW

• How to password protect my files shared on my network?

  I am trying to share a folder on the network and the have password protected. I use Windows XP Service Pack 3 Professional. I have disabled in simple file sharing files Options. All my computers are in the same workgroup. For the record I would like to share, I have the following settings:

  On the sharing tab, I 'Share this folder', filled in the maximum limit and the share user name. The "Permissions" button, I deleted "Everyone" and put in a username I've created specifically for the sharing folder connection and he gave total control. Everything is left to him by default.

  For the Security tab, I just like default except added the user account, I created and that you have authorized for total control.

  When I look at from any computer on the network, I can see the computer and shared folders in the working group. There is a default folder "SharedDocs" I open it. But if I try to enter the folder that I created, I get the following error:

  "You are not allowed to access \\MYCOMP\SharedFolder. Contact your network administrator to request access.

  If I do all what I said above, but instead of adding the user account, I put "Guest" or "everyone, then the file can be found on my other computers without the error but no password is invited. What should I do so that when I try to enter the folder, it ask for a login and a password.

  As a side note, my other computers do not have this problem with their shared folders. When I click on the computer under 'View workgroup computers '. Rather than open a list of shared folders, it opens a prompt for a login and a password, and if they are correct, it will show that all shared folders and files shared to that user. If the password of the specific folders is not possible, should what settings I change so that it works like this instead?

  My apologies if this should have been in the files, records and research topic.

  When you connect to a network share, authentication proceeds roughly in this order:

  1. If the user on the remote computer is connected with a user name that exists on the machine sharing the passwords match, while the user is authenticated as himself without another guest.
  2. If the user on the remote computer is connected with a user name that exists on the machine of sharing and the passwords do not match, then this as seen user denied access to the computer sharing without prompting.
  3. If the user on the remote computer is connected with a user name does not exist on the machine of sharing, an attempt is made to authenticate the user "guest".  If successful, that the user connection looks like it is 'guest' on the machine of sharing user.
  4. If the remote user is unable to authenticate as a 'guest' on the sharing machine, then a name of user and password screen appears to provide authentication.

  It seems to me to make it work as you want, you want to make sure that step 3 above does not occur.  This can be accomplished by disabling the "Guest" on the machine sharing account. (This forces everyone to authenticate on the machine)  Two ways to do as an administrator on the machine of sharing:
  (A) bring up a command prompt window (start-> Run-> "cmd") and enter the command:
  NET user guest / active: No.
  (B) right click on 'My Computer'-> manage-> system tools-> local users and groups-> users
  Double-click "Invited" in the right window-> Put a check in the box "account is disabled".  "OK" your way out.

  HTH,
  JW

• I want to limit the file sharing on a home network, Windows XP Pro (working group) to a specific user on a different computer.

  I can't get this username entered with success because I'm limited to only users on the computer, I'm trying.  I have Windows XP off file sharing simple.  Both computers running XP Pro and I can share the folder, but it is open to ALL.  Is there a way to do this?

  I would like to try to explain how it works.  You have XP Pro on Computer1 and you have disabled Simple file sharing.  It is a step in the right direction.  The facts are that the file exists on the computer 1 and is 1 computer to control what external connection gets access to this file.  Computer 1 can only validate combinations of username/password names he knows.  Is not in a domain, computer environment 1 includes only names of user and password that exists on the computer 1.  He cannot know or trust any combination of name of user and password that does not exist within itself.  The normal method, most people use is to create the same user on computer 1 that exists on the computer that connects and gives the same password that is used on the computer that connects to this user.  If this is the case, the external user connects seamlessly and have access if 1 computer gave this authorization to the user in this file.  Access can be controlled by right-clicking on the file or folder, select 'Properties' and then use the 'Security' tab to generate an access matrix.

  Authentication: When connecting to the computer 1 from another computer, computer 1 search first if the username on the computer connection exists on the computer 1.  If the user name of the user on the computer connection exists on computer 1 and passwords on both computers to match, the connection is established.  If the passwords do not match, the connection is refused.  If the user name of the logged in user does not match a user on computer 1, then the 'Guest' user is attempted.  If the guest user is not protected by a, then the user will resemble the user 'Guest' and 'Guest' appropriate access.  If the guest user is disabled on Computer1, and then the computer connection displays a name of User/Login screen asking the user to provide credentials (name and password) 1 computer can use and recognize to check that the user.  If a name of user and password recognizes that computer 1 is entered, then computer 1 authenticates the user with this credential.

  Of course, once authenticated, the user will have access to these files to which permissions have been granted to this user authenticated according to the KB307874.  XP cannot grant permissions to users, he knows not (obviously) beyond the 'Guest '.

  Bottom line is that you have discovered in a domain environment (workgroup), you MUST authenticate as a legitimate user who is (and who is not disabled) on Computer1.

  HTH,
  JW

• I have problems with network file sharing on 3 Windows XP computers.

  I created a network of small business between 3 workstations.  The last 2 set up on the network can communicate and share files between them, but cannot connect to the 1st workstation set up on the network to share files.  connect to 2nd & 3rd ws 1 ws.  a ping to the 1st ws is OK.  followed all the instructions for sharing and folder permissions.  is there any security on ws 1 problem that I forgot?

  original title: shared folders

  Hello

  Follow the steps in troubleshooting these items:

  How to troubleshoot a network home in Windows XP

  How to use Simple file sharing to share files in Windows XP

  See also:

  How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP

• How can I connect Windows XP to several networks, Wi - Fi for internet and the other for file sharing?

  On windows XP, I need to connect to two different networks. Free wifi for the internet and the other for file sharing.

  Different gateways, different static address, same subnet mask. But there is problem when operating simultaneously and must

  a network must be disabled. Is it possible to run simultaneously?

  original title: served various networks simultaneously on windows xp

  Go to where you have configured the static IP addresses for your network adapters.  Leave the "default gateway" blank for your local file sharing adapter and insert a valid default gateway for your wifi Internet adapter.  Of course, this will limit your adapter in a single subnet - which should be OK for use at home or small office to share local files.

  This should work as long as the two physical subnets have two different subnet numbers. In general, this means that the first three digits of the IP address of the adapter can not be the same on both adapters - if they are, then you need to make one of the subnets. (i.e. one is 192.168.1.xxx and the other would be 192.168.2.xxx).  This is usually accomplished in the router configuration page.

  HTH,
  JW