I have problems with network file sharing on 3 Windows XP computers.

Similar Questions

• I have problems with pdf files, sent to me by e-mail, download doc on my canon printer and the creation of pdf file to send.

  Original title: pdf files

  I am running microsoft windows xp home edition 2002. I always have problems with pdf files, sent to me by e-mail, download doc on my canon printer and the creation of pdf file to send. I use microsoft works Task Launcher 2004 edition.

  Is there an easy way to pass so I can handle pdf files?  Can anyone help?

  Thank you Tim

  Hello

  Please provide us with more specific information on the issue. Your post is a bit confusing.

  If you need to open the PDF files, you will need to install a PDF reader.

  If you try to print in PDF format, you must install Adobe Reader.

  Reference: http://www.adobe.com/downloads/

  THIRD WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.

  How can I solve this problem

  the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.

  If you are not a Subscriber cc then Dropbox or iCloud will work as well.

• I ran CHKDSK, the report tells me I have problems with the file system, usn journal. ___

  I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.

  Describe how you run chkdsk.

  That is what the report said: you have problems with the sys file?

  CHKDSK examines the disk space and use of the disk for the table of allocation of files (FAT) and NTFS file systems. CHKDSK provides information specific to each file system in a situation report. The report shows the errors found in the file system. If you run chkdsk without the /f on an active partition command line option, it can report errors because it cannot lock the drive. You should use chkdsk occasionally on each disk to check for errors.

  If you run chkdsk from a command prompt while Windows is running, it can report errors or it may not report errors - and it may report different
  Errors each time you run.  If this is the case, it could just be the way you run chkdsk.

  Here's how Microsoft explains this observation:

  "... CHKDSK may report that the disc is damaged, even when there is no
  current real corruption. This can happen if NTFS happens to modify
  areas of the disc on behalf of some programme activities that CHKDSK is
  review at the same time. To check a volume correctly, the volume
  must be in a static state, and the only way to ensure that the State is
  to lock the volume. CHKDSK only locks the volume when /F or/r (which
  involves the 'F') is specified. For example, you may need to run CHKDSK more than
  time so that it can complete all the steps in read-only mode. »

  If you run chkdsk from a command prompt, you are not the necessary static state and you can encounter errors "when no real corruption is present. This is how it works when you use this way.  Any changes made to a NTFS file system modifies the USN Journal.  If you are not in a static state, your USN change Journal probably all the time, so what you see (says something like that) can be quite normal.

  Two ways to ensure that you are in a static state is to run chkdsk from the Recovery Console or to schedule a chkdsk to run the next time that the system
  Restart by answering Yes to the question:

  Would you want to check this volume to be the next time the system restarts?

  If chkdsk reports errors when running in a static state, the errors should be investigated, resolved or explained.  This may take several
  chkdsk runs all of the issues and some problems cannot be resolved by chkdsk.

  If chkdsk runs the next time the system is restarted, the activity and the result will be displayed in the application event log.  Look in the Application log for
  Winlogon events and a source have the date and the duration nearby time chkdsk.

  It is in fact a chkdsk additional reading if you want to learn about it and it will explain everything you see and why your expectations exceed reality.

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony!

• The problem with the file sharing by mail from the contextual menu in the Finder.

  When I want to send a file by email from the Finder, I do a right-click on the file and choose 'Sharing'-> 'Mail '. I expect to see the new e-mail message with the attached to the message of failure.

  But nothing happens and the Finder stop responding and I have to "Force quit" them.

  My configuration:

  MacBook Pro (retina, 13 inches, end of 2012), 2.5 GHz Intel Core i5, 8 GB 1600 MHz DDR3, HD 4000 1536 MB, version OS X El Capitan 10.11.3 graphics card

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• LR 5.7.1 (OS 10.11.2) does support the Sony A7II .arw files (after software update - 14-bit uncompressed RAW). I have problems with the files of importation of this camera.

  ?

  No, it isn't. The latest version only.

  If you do not want to go to 6.3 or CC, you can use the latest DNG converter, convert your images to DNG and import those in 5.7.1.

  HAL

• Have problems with the Audio after upgrade to Windows 10

  I got a free upgrade for Windows 10 option on my laptop Acer Aspire SW5-011. Everything seemed to work fine, except that I don't bother checking the audio before deleting the files Windows 8... Even if the computer thinks that the Audio drivers work very well that they are not. I have tried everything that I could find online to see if I could get any sound, but nothing has worked. I updated the drivers, kidnapped rebooted and updated the drivers, I tried to find the other acceptable drivers and other follow-up steps. "When I go to reading tab in the sound and click speakers, and then I go to the Advanced tab, the default format said, ' 16 bit, 48000 hrtz ' is grey, I can't click on it and when I try to test it says:"Cannot play testtone" It's as if something prevents me from accessing or it acts like I'm not pregnant? The speaker driver is called "Intel SSD Audio Device. The audio worked fine before downloading. Is it possible to fix my Audio, or to have access to it yet?

  Good so I had to update my post because I had to give the good news! However, that is how I am and I almost try everything and tinkering with different things. My audio works now. I went back the download Acer drivers and manual for my camera and I checked under 32-bit Windows 8, which was windows available. I installed my ID which has been deleted before when I had restarted or any number of things, I tried, and then I went in Drivers and installed the Master Installer. I made sure that I extracted all the files before proceeding with the installation. After it restarted my laptop I heard the Windows startup sound and I knew that it worked because I had no sound at all before. Not sure why it worked, but it did! I felt there was some sort of missing file or a compatibility issue, I'm just happy that the program helped master installation. http://us.acer.com/ac/en/US/content/drivers/5687;-; SW5-011 #_ga = 1.21697787.1131678756.1448199856

• I have problem with a .iso file that when I want to use I face the error "the file name is too long.

  Original title: name of a file

  Hello

  I have problem with a file .iso that when I want to use I'm dealing with error "the file name is too long" and I can't use this file anywhere for example: vmvare ' untraiso and even if I cannot write to cd or make a boot USB.

  I don't know how fix it.how I rename the file iso, shorter that I can use?

  Please help me.

  Thank you.

  Right-click on the ISO > rename > give a short name

• So, my cousins both got two netbooks for Christmas so I took it upon myself to put in place. However, I seem to have problems with getting Homegroup to work.

  original title: incorrect Homegroup password

  So, my cousins both got two netbooks for Christmas so I took it upon myself to put in place. However, I seem to have problems with getting Homegroup to work.

  All computers:
  Have enabled IPv6
  Use Microsoft Security Essentials with the last update
  Are connected to the same router (Linksys WRT54GX2)
  Have no other third-party firewalls or AV installed and have been neatly eliminated via their respective tools when they had their
  Can be seen in the network and can access any other files via 'network '.
  Have the correct date and time and are all in sync with time.nist.gov.
  Have the same network sharing settings (network discovery on, files and printers sharing folders public, sharing, streaming, wide, 128-bit encryption, sharing password protected, to allow windows to manage the homegroup connections)
  Network is set at home, not in public

  The computer that has implemented the homegroup is connected via ethernet to the router while other computers use to access the router 802.11 g I tried to delete and redo the residential group as well.

  Despite all this, it is said that the homegroup password is incorrect for both netbooks (where it says it has encountered an error). I realize that it is case sensitive and I entered the password correctly. I also ran the resolution of the problems of the homegroup on all 3 machines and still no luck. I also tried to change the password and restarting of machines.

  Any suggestions? I was _really_ hoping it will work right out of the box. Maybe it's something with the router? I don't really know. Any help is appreciated. Merry Christmas! : D

  Hello

  check out this link.

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-create-a-HomeGroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

• I have problem rotation tiff file in the Windows Photo Viewer.

  The last time when you use Windows XP, it is ok, but after upgrading to Win7 have problem rotation of files tiff using standard Windows photo viewer or Windows Live Photo Gallery. This happens to the files without administrator rights. Understand that the last time WinXP also had this problem but it had been fixed. Any resolution for Windows 7?

  If I understand correctly, you cannot rotate the tiff file in the Windows Photo Viewer. I suggest you follow the troubleshooting steps to check if this may help.

  1. don't you make changes on the computer before the show?
  2 is the issue limited to the tiff files?
  3. you receive an error message on the computer?

  Photo Viewer Windows can only view .jpg and .jpeg, .tif and .tiff, .png, .gif, .bmp and DIBs, .wdp file types.
  For more information, see this link:
  Understand the types of image files
  http://Windows.Microsoft.com/en-us/Windows7/understanding-picture-file-types

  Method 1:
  You can take all the permissions in the folder of tiff files and check.
  Here are the steps to change the ownership and permissions of files and folders:

  a. right click on the file or folder, click Propertiesand then click the Security tab.

  b. click Advancedand then click the owner tab.

  c. click change, and then do one of the following:

  · To change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples), type the name of the user or group, and then click OK.

  · To change the owner to a user or group that appears in the area of change of ownership to , click the new owner.

  d. If you want to take ownership of the contents of the folder, select the checkbox replace the owner of sub containers and objects .

  e. click OKand then click Yes when you receive the following message is displayed:

  You are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?

  All permissions will be replaced if you click Yes.
  
  Note folder_name is the name of the folder you want to take charge.

  f. click OKand then reapply the permissions and security settings that you want for the folder and its contents.

  Method 2:
  You can check the link to rotate a picture using Windows Photo Viewer

  http://Windows.Microsoft.com/en-us/Windows7/rotate-a-picture-using-Windows-Photo-Viewer

  If the problem is on the Windows Live Photo Gallery you can post the question on the link provided below for assistance

  Gallery Portal

  http://windowslivehelp.com/product.aspx?ProductID=20

  Please follow the recommended steps and post if you still experience the problem. I'd be happy to help you further.

• I just did a check of norton power Eraser which revealed that I have a problem with the file ntsd.exe.

  original title: problem with file ntsd.exe

  I just did a check of norton power Eraser which revealed that I have a problem with the file ntsd.exe. Does anyone have suggestions about what to do to fix it? Thank you very much.

  Hi JohnABuckley,

  • Are you facing any problem on the computer?

  Ntsd.exe is a process belonging to the Microsoft symbolic debugger that lets you debug applications in user mode.

  As the link below, it says that there is a risk that Norton Power Eraser can select some legitimate programs for removal. You should carefully review the analysis results page before deleting the files. I suggest that you don't delete the file unless you are facing problems with the computer.

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=us&docid=20100824120155EN&product=home&version=1&PVID=f-home

• As a plug-in?  I have problems with an editable IRS form.   It gives me "Access denied" and then opens the file as an editable file.  I was able to open the form in the library.

  As a plug-in?  I have problems with an editable IRS form.   It gives me "Access denied" and then opens the file as an editable file.  I was able to open the form in the library.

  I found a few other questions on this forum who have remained unanswered.   I found a site citing the problem for drive X - I use XI.

  Change to drive XI.   Perhaps the reader at the library had this as its default setting.

  1. In Adobe Reader, clear the check box enable the Mode protected at startup :
     • If you have a PDF open, right-click the document, and then click Page Display Preferences.
     • If you open Adobe Reader from the shortcut, click on Edit > Preferences.
  2. In the categories dialog box Preferences pane, click (enhanced) protection, and then clear the box enable the Mode protected at startup .
  3. Close and reopen Reader.

  I have no idea if that setting has been changed in my XI player since I used this version exactly one year ago.

• Hello! I have problems with the Illustrator. Each of them is turning incorporated when I close the file.

  Hello! I have problems with the Illustrator. I link images, close the file, but when I opened again all the links is not respected and turn to the software! Linked images are PSD files, apparently without any problem. Anyone?

  Thank you, but the problem was simple: the box to save the file was with the option 'include linked files' and I do not understand. I never click on this option, but I discovered that my friend had clicked on this (we have both worked with the same campaign files).

  And as for the pdf compatibility, I thought this could be the cause of the problem and I have enabled sometimes and try to save it again, but it wasn't the cause. And Yes, the file remains much better with less than half the original size ():

  Thank you!

• I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What do I need

  I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What should I do to change it?  I use DreamWeaver 2004 on a PC.

  You will need to correct the links that begin with "file".

  Now that your site has been defined, you just delete the bad links and DW left write the good ones for you.

  Click on the yellow folder on the property inspector, and then select the target page.

  

  If your site is small, you can edit the links manually (remove the part in red)

  content.htm file:///C:/desktop/localRootFolder/subfolder/subfolder/images/

  It would be useful that post you your code on the page so that we can see if you use the old technique or new for these links.

• problem with Internet connection sharing, error: connection ad - hoc has "no internet access" on the cell phone of the customer

  Original title: problem with Internet connection sharing

  my laptop running on Windows Vista Home Premium SP2 (this one has access to the internet by using the dial-up modem and will to act as a sharer of internet connection or as a host) and the client computer runs on Windows 7 Starter

  in a first step, I try internet connection sharing, I've set up an ad hoc network and I just changed my setting modem dial-up on the sharing tab, of course what I change, it of 'Allow an other network users to connect through this computer internet connection' and choose the on Home Networking connection wireless network connection , then my mobile client to connect to a special that I created and portable client connected to the internet via ICS
  then the problem came when I restart my laptop. When I tried to use ICS once again, my customer laptop really takes a long time to connect, he continues saying 'identification' side host and client. and after that "identify" is complete, it says ad - hoc connection, I create has "no network".
  so, I'm a person answer in this forum
  ' Obtain an IP address automatically is the wrong setting on the Ethernet connection. "  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

  IP address: 192.168.0.1
  Subnet mask: 255.255.255.0
  Default gateway: no
  "DNS server: none.

  I put this on my laptop of the host, and and I put the IP address on my laptop customer in 192.168.0.2 with the same default gateway as my portable computer host IP

  and made some progress in this case, when I try to connect host and the client is no longer to 'identify' phase, immediately connected laptop both but my mobile client can not connect to the internet and displays "No Internet access" on the ad hoc network, I have create

  I tried a lot of things but always completed my mobile client can not connect to the internet and displays the message "no Internet access.

  What makes me confuse is first, I try to share the internet connection everything works like a charm, I set up an ad hoc network, and then change the setting on my modem dial-up so he can share the internet connection, and voila, computer laptop client connected to the internet. I change even not all IP settings

  But why after I restart my PC, this problem comes...

  someone knows how to help me with this problem?

  Hey, Mimbs,

  You can try the similar thread to the next with a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/no-Internet-access-in-the-client-machine-when/77312e09-4385-41FA-A420-0c42be58e4e3

  Also for reference:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows