'Disable the alarm action' for a virtual machine

Similar Questions

• Disable the clichés for individual virtual machines?

  Hi all

  Is it possible to disable support for snapshot for individual virtual machines, perhaps via a parameter for it?  Or is the closest answer you to put all its virtual disks in independent mode?  Try to see how to better meet the requirements that certain suppliers impose that the VM/device does not catch instant and thought that the best solution is to disable the feature for the specific VM (s) only.  Thank you!

  You can watch the snapshot.maxSnapshots configuration setting. See KB 1031280 for more information.

• How to get the moref vCenter for a virtual machine

  I use with the vCloud orchestrator plugin.  I would like to understand how I can access the moref for a virtual machine identifier (as see vcenter) that is contained in a vCloud VAPP.

  Thank you

  Here is something I wrote to do. It uses the query service.

  Note that to be able to do, you need your plugin vCD to be connected to the org of system and use the administrator credentials.

  var vcdHost = vm.getHost();
  var vApp = vm.parent;
  
  var vms = new Array();
  var queryService = vcdHost.getQueryService();
  
  expression = new VclExpression(VclQueryAdminVMField.CONTAINER, vApp.getReference().href, VclExpressionType.EQUALS);
  filter = new VclFilter(expression);
  params = new VclQueryParams();
  params.setFilter(filter);
  
  var resultSet = queryService.queryRecords(VclQueryRecordType.ADMINVM, params);
  while (resultSet != null) {
      var records = resultSet.getRecords(new VclQueryResultAdminVMRecord());
      System.log(records.length + " VM records found");
      for each (var record in records) {
          if (record.name == vm.name) {
              return record.moref;
              }
  
      }
      resultSet = resultSet.getNextPage();
  }
  return null;
  

  Christophe.

• Disable the network interface on a virtual machine

  Hello all-

  Is there a way to disable the network interface on the network adapter in the virtual machine?  We have a group of applications who want to simulate a network in collaboration with MSCS failure - I don't necessarily agree with the fact that this type of test, but try to determine if this is possible from the functional point of view.

  Our ESX host have networks of virtual machine set up off the coast of 4 port nic mezzanine card, and I don't want to touch the VM network vswitch as any part of this test.

  Thanks for any help you can provide-

  Steve

  Is there a way to disable the network interface on the network adapter in the virtual machine?

  Yes, in the virtual machine settings, for each NIC assigned to the virtual machine you will find a checkbox 'connected '. Unchecking it's like pulling the network cable.

  André

• Location of the VMX file for a virtual machine

  My problem,

  I have a bunch of VM that names the real record of the VM and files below are NOT the same as the VM name shown at the VI appointed client. -J' it can't wait... makes more complicated

  I want to know is if there is a way to a virtual machine that is in inventory and get the path to his report and the real VMX path of query file, which I guess would give me the name of the data store and the record in the data store.

  My question for example:

  My - vma: (in VIclient)

  [myds0100]/web34/web34.vmx (because if I get off by accessing the site after clicking on 'my - vma' VM in viclient)]

  You can do

  Get - VM | Select the path Name,@{N="VMX"; E={$_. ExtensionData.Config.Files.VmPathName}}

  You could also have a look at the VIProperty called VmxDatastoreFullPath.

• Set the host name for a virtual machine

  While the vApps instantiation using a model about the same way as the sample of HellovCloud.java, I need to be able to change the host name (called the name of the computer in vCD) of the only virtual machine contained in the VAPP. I can't find examples on how to do it. Any ideas?

  Hope that this helps, I took it out some code that we use (SDK). NET - this is not an exact copy of the labour code, but must be what it takes to get there.

  String modifierText = "1234";

  With complete API v1.5 may need to change this kind of object to Vm

  VAPP vm = GETTHECHILDFROMTHEAPP (VAPP. GetChildrenVms());

  If (vm. GetGuestCustomizationSection()! = null)
  {
  GuestCustomizationSectionType guestSection is vm. GetGuestCustomizationSection();
  int len = guestSection.ComputerName.Length;
  If (len > 10) len = 10;
  guestSection.ComputerName = guestSection.ComputerName.Substring (0, len) + modifierText;
  Try
  {
  VM. UpdateSection (guestSection);
  }
  catch (VCloudException ex)
  {
  Exception thrown by 1.5 hosts: VCloudException
  (The parameter is not supported in the current context: AdminPassword)
  bug workaround
  If (Message.Contains ("AdminPassword") e.g.)
  {
  AdminPassword value NULL and try again
  guestSection.AdminPassword = null;
  VM. UpdateSection (guestSection);
  } else {}
  throw;
  }
  }
  }

• change default location for new virtual machines programmatically

  I know that you can change the default location for new virtual machines through the preferences GUI, but I want to be able to change it for all those who use VMWare Workstation in my company, so that it is more advanced to the personal folder of the user.

  Where exactly is stored?  I don't see in the registry.

  Thank you!

  WS does not use the registry to store settings.

  Set the path in UNK for each user:
  prefvmx.defaultVMPath = "F:\. »

• Setting Options such as Hotplug for all virtual machines

  Hello!

  I have about 5 esxi hosts 5 and about 50 virtual machines

  Unfortunately I forgot to select some options like activate the plug-in memory and cpu hot

  I have 2 questions

  1 can I do this without turning off the machine

  2. How do I make a few options like this (or for example another option as vmtools update during the feeding cycle) for all virtual machines in my environment

  It's too much time to go to all virtual machines and turn them off and turn on these options

  Thank you very much

  These features must be enabled before the virtual machine is running.  So, you will need to turn them off and then use something like powercli to enable the features and turn them back on.

  Here is an example on how to do it with powercli: http://ict-freak.nl/2009/10/05/powercli-enabledisable-the-vm-hot-add-features/

  -KjB

• Affinity processor for a virtual machine

  I have a lot of CPU 8 on which I have installed ESX 3.5 U3. I also created a virtual machine Windows 2003 Server SP2 with 2 CPU is assigned to the.

  I'm trying to set the processor affinity for this virtual machine to use 2 of my physical processors. I see now on the tab Advanced CPU, I am able to select all available 8 physics of the processor. So now I'm a bit confused regarding if VMware allows scaling of my machine virtual to use all 8 CPU when my virtual machine is only 2 CPU?

  Now if the above is true, and I am to be allowed to set the affinity of the virtual machine to the all 8 CPU, then why is this maximum limit of the processor for a virtual machine is only 4? A stupid question probably but I'm really confused?  :|

  Hi confused,

  Yes, the user interface is a bit confusing. As RParker said, basically what you are doing when you assign the processor affinity are to identify the nuclei on which the vCPU is eligible to run on. At no time will be the VM scheduled to be run on carrots than what there vCPUs, so he will never have access to a capacity more than expected.

  The processor affinity is one of those features that's been around since 'the beginning' and its utility is really a bit blurred. I've heard of cases where users were running Citrix workloads configured with 2 vCPU and assigned the processor affinity for each virtual computer with the result of improving the performance. I wonder this because I never saw myself, and have a decent knowledge of how works the vmkernel Scheduler, it make much sense.

  I would encourage you (and anyone else reading this) essentially forget that the processor affinity is an option. Use it can cause significant performance degradation (if, for example, you pin a VM through two nodes NUMA, rather than keep vCPUs all in the same node) and break features (VMotion, DRS and who knows what else in the future).

  Ken Cline

  VMware vExpert 2009

  VMware communities user moderator

  Blogs about: http://KensVirtualReality.wordpress.com/

• ESXi 5 - Longmode is disabled for this virtual machine.

  Hello

  I installed ESXi 5.0.0 469512 on a Dell Optiplex 755 with Intel Core 2 Duo E8400 processor @ 3 .00GHz with 4 GB of RAM. In the BIOS (version A21), I have the following options enabled:

  Performance-

  Virtualization: on

  VT for direct i/o: on

  Execution of trust: on

  Security-

  TPM security: on

  Activation of the TPM secure: assets

  Execute Disable: on

  I am unable to run any 64-bit OSs. For example, when I try to start vMA VM 5.0, I get the following Message from the Virtual Machine:

  "This virtual machine is configured for 64-bit operating systems. However, the 64-bit mode is not possible.

  Longmode is disabled for this virtual machine.
  For more information, see http://VMware.com/info?id=152 .
  Continue without 64 bit support? »

  I ran the "processor check for 64-bit compatibility ' and if confirmed I can run 64-bit guest OS.

  I tried to add vhv.allow = "TRUE" to/etc/vmware/config, but it made no difference.

  In the vmware.log file is that it makes meantion 'virtualization software is incompatible with the long mode on this platform. Disabling longmode. "I have attached the full logfile for details.

  Any help will be greatly appreciated.

  Thank you Paul.

  According to the log file

  Frequent: MSR 0x3a = 0x3--> currently '0011', should be 'x 1 x 1 "'.

  VT - x is not enabled (bit 0 + 2 required)

  There were other debates, where that allows "Trusted execution" cause problems. I "suggest that you configure the settings of the BIOS as follows:"

  Performance-

  Virtualization: on (assuming it's VT - x)

  VT for direct i/o: Off (unless you need it)

  Execution of trust: Off

  Security-

  The TPM secure security: Off

  Activation of the TPM secure: inactive

  Execute Disable: on

  After you change the settings, you will need to power cycle the system.

  André

• Disable vmotion for 1 virtual machine in an ESX host

  Hello

  We have an ESX environment that is configured with vMotion.

  As a result, I've seen VMs from one ESX to another very frequently.

  Among these virtual machines, I have a very critical virtual machine, I want to move to any other host ESX.

  Y at - it an option that I can use to disable VMotion only for this particular virtual machine of mine (in order to keep constant on the ESX on which it is right now) and allow the other virtual machines to continue.

  Appreciate your help.

  Thanks in advance

  I guess that your VMS migrate between ESX servers because configuration automated DRS ESX cluster level. You can replace it for a specific virtual machine. Cluster of right click Select-> "Settings"-> click on options of the Virtual Machine under VMware DRS,. On the right, make sure 'Enable the levels of automation individuak virtual machine' is checked. You can see VMs list below. Select the virtual machine that you want to replace and change the level of automation for people with reduced mobility

• Fret is disabled for this virtual machine

  Host environment: Windows XP Professional x 64 SP2

  Environment comments: Windows Server 2003 R2 SP2

  Of disk space free hosting environment: 31.1 GB

  Comments environment size the disc: 13 GB (total 20, 7 for free)

  Comments environment size the disc on host drive: 20 GB

  VMWare version: Workstation 6.5.0 build 118166.

  The question:

  I am currently unable to carry out the reduction operation.

  I did a search on google and find a few scenarios:

  • http://communities.VMware.com/thread/113057

  • http://communities.VMware.com/thread/151594

  However, I was not able to solve the problem.

  The full message is as follows:

  Fret is disabled for this virtual machine.  Shrinkage is disabled for linked clones, parents of clones related, préalloués disks, snapshots, and other factors.

  This virtual machine has definitely shrunk in front.  I tried to reinstall VMWare Tools and it does not correct.  I checked that there are no snapshots in the Snapshot Manager.  I also tried as suggested by one of the sons: adding a snapshot and then remove it.  I'm unable to the fret.  Of course, this isn't a linked clone or a parent of a linked clone (do not know how to use them).  How can I tell if it is a pre-allocated disk (I don't think it's, but who knows)?

  On the file system, the looks of the directory as follows:

  • ------& lt; GUID & gt;. vmem.lck

  • \Windows server 2003 Standard Edition.vmdk.lck

  • \Windows server 2003 Standard Edition.vmx.lck

  • & lt; GUID & gt;. vmem

  • VMware - 0.log

  • VMware - 1.log

  • VMware - 2.log

  • VMware.log

  • Windows Server 2003 Standard Edition.nvram

  • Windows Server 2003 Standard Edition.vmdk

  • Windows Server 2003 Standard Edition.vmsd

  • Windows Server 2003 Standard Edition.vmx

  • Windows Server 2003 Standard Edition.vmxf

  • Windows Server 2003 Standard Edition - flat hard

  Any help would be appreciated.

  The list of files that you show your virtual disk is pre-allocated (*-flat.vmdk).  As the message says, you will not be able to reduce a drive pré-alloués.

• Is it possible under the EULA to have several virtual machines on a single physical hard disk while using the same OS license or do I need a separate license for each virtual computer?

  I have several programs that are not compatible with my 64 bit Windows 7 operating system.  I would like to run each different software under another virtual machine of VMWare (5 packs of different software programs and 5 different virtual machines of Windows XP).  These would all be installed on your laptop.  I can use the same license of Windows XP for each virtual machine, or do I need a separate XP license for each (different XP in case 5 licenses)?

  It is lifted directly from my EULA:

  1. GRANT OF LICENSE.

  The manufacturer that you grant the following rights, provided that

  comply you with all terms and conditions of this EULA:

  1.1 installation and use.  You may install, use, access,

  display and run one copy of the SOFTWARE on

  THE COMPUTER.  The SOFTWARE may not be used

  by more than two 2-processor both on the

  COMPUTER, unless a greater number is

  indicated on the certificate of authenticity.
  Then...
  This means that as long as you are running two or more instances of XP at the same TIME, you agree? Or does this mean that, after you install once, you have reached your limit?
  I imagine that most people (including those who are running Microsoft!) will say that the second interpretation is correct.
  However...
  If this is the case, anyone their hard drive as a backup to clone strategy would violate the EULA!

• How to find the age of a child and snapshot number snapshot for a virtual machine.

  Hi all

  How to find the age of a snapshot for a virtual machine child count and snapshot.

  This code snippet should help... Assuming that you have the following entries:

  VM (VC:VirtualMachine)

  snapshot (VC:VirtualMachineSnapshot)

  System.log("====== Snapshot details for VM: "+snapshot.config.name+" ======");
  var snapshotTrees = vm.snapshot.rootSnapshotList;
  System.log("Snapshot Tree Count: "+snapshotTrees.length);
  for each (snapshotTree in snapshotTrees){
      showSnapshotInfo(snapshotTree, snapshot);
  }
  
  function showSnapshotInfo(snapshotTree, selectedSnapshot){
      if(selectedSnapshot == snapshotTree.snapshot){
          System.log("====================");
          System.log("Name: "+snapshotTree.name);
          System.log("Id: "+snapshotTree.id);
          System.log("Description: "+snapshotTree.description);
          System.log("createTime: "+snapshotTree.createTime);
          System.log("quiesced: "+snapshotTree.quiesced);
          System.log("replaySupported: "+snapshotTree.replaySupported);
          System.log("backupManifest: "+snapshotTree.backupManifest);
          System.log("snapshot id: "+snapshotTree.snapshot.id);
          System.log("state: "+snapshotTree.state.value);
          var childSnapshotList = snapshotTree.childSnapshotList;
          if(childSnapshotList != null){
              System.log("childSnapshotList length: "+snapshotTree.childSnapshotList.length);
          }
          System.log("");
      }
      if(snapshotTree.childSnapshotList != null){
          System.log("Children found: "+snapshotTree.childSnapshotList.length);
          for each (childSnapshotTree in snapshotTree.childSnapshotList){
              showSnapshotInfo(childSnapshotTree, selectedSnapshot);
          }
      }
  }
  

  During the passage of one of my virtual machines, here is an example of output I get:

  [2014-06-12 15:19:21.493] [I] Snapshot Tree Count: 1
  [2014-06-12 15:19:21.493] [I] ====================
  [2014-06-12 15:19:21.494] [I] Name: before upgrade to 5.0.1
  [2014-06-12 15:19:21.494] [I] Id: 31
  [2014-06-12 15:19:21.494] [I] Description:
  [2014-06-12 15:19:21.495] [I] createTime: Mon Mar 19 2012 13:48:57 GMT-0400 (EDT)
  [2014-06-12 15:19:21.495] [I] quiesced: false
  [2014-06-12 15:19:21.495] [I] replaySupported: null
  [2014-06-12 15:19:21.495] [I] backupManifest: null
  [2014-06-12 15:19:21.496] [I] snapshot id: snapshot-83
  [2014-06-12 15:19:21.496] [I] state: poweredOff
  [2014-06-12 15:19:21.496] [I] childSnapshotList length: 1
  [2014-06-12 15:19:21.496] [I]
  [2014-06-12 15:19:21.497] [I] ====================
  [2014-06-12 15:19:21.497] [I] Name: Before 5.1 upgrade
  [2014-06-12 15:19:21.497] [I] Id: 36
  [2014-06-12 15:19:21.497] [I] Description:
  [2014-06-12 15:19:21.498] [I] createTime: Fri Sep 21 2012 21:59:58 GMT-0400 (EDT)
  [2014-06-12 15:19:21.498] [I] quiesced: false
  [2014-06-12 15:19:21.498] [I] replaySupported: null
  [2014-06-12 15:19:21.498] [I] backupManifest: null
  [2014-06-12 15:19:21.499] [I] snapshot id: snapshot-84
  [2014-06-12 15:19:21.499] [I] state: poweredOff
  [2014-06-12 15:19:21.499] [I] childSnapshotList length: 1
  [2014-06-12 15:19:21.499] [I]
  [2014-06-12 15:19:21.500] [I] ====================
  [2014-06-12 15:19:21.500] [I] Name: Before Named Instance
  [2014-06-12 15:19:21.500] [I] Id: 37
  [2014-06-12 15:19:21.501] [I] Description:
  [2014-06-12 15:19:21.501] [I] createTime: Mon Nov 11 2013 13:40:46 GMT-0500 (EST)
  [2014-06-12 15:19:21.501] [I] quiesced: false
  [2014-06-12 15:19:21.501] [I] replaySupported: null
  [2014-06-12 15:19:21.502] [I] backupManifest: null
  [2014-06-12 15:19:21.502] [I] snapshot id: snapshot-236
  [2014-06-12 15:19:21.502] [I] state: poweredOff
  [2014-06-12 15:19:21.502] [I]
  

• Change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  I have problems with a client of VMware image-level in an EMC Avamar backup.  So far, we have not been able to find information about this message in the backup log file.  It is originally the backup to take a very long period of time (on average 10-11 hours).

  2014-02-28 14:20:57 avvcbimage < 14681 > Info: change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  We cannot determine why CBT is "denied".  Has anyone here run across this issue before or seen any other type of backup VMware image have denied CBT?

  Everything I checked watch that CBT is successfully activated since the file vmx for the customer to the Avamar config.

  ESXi host is Enterprise Plus 4.1.0 260247

  After spending some time on this issue, the ultimate resolution withdrew the Avamar vm and then add it again.  After that, CBT began to work properly.  It seems that there is a parameter that has been 'stuck' pertaining to this virtual machine that wasn't behaving properly.