Disable the CMF 6.1 IPv6 network discovery

Similar Questions

• How to disable the registry or command line network discovery / CMD?

  Hello

  We have 8 embedded windows.

  We don't want this popup about how to connect to a new network or router:

  

  There is no such GUI as shown here:

  http://Windows.Microsoft.com/en-us/Windows/enable-disable-network-discovery#1TC=Windows-7

  We need to turn it off via the command line or the registry, or both.

  Support and advice appreciated.

  Thanks in advance.

  You can still get the same GUI that allows you to turn it off.  Simply go to the network and sharing Center and the "change advanced Sharing Options" will be on the left.

  
  ↑ This still works in Windows 8

• Cannot turn on network discovery. I get the message "specified service does not exist as an installed service.

  Suddenly, something has changed in my computer and now I can't turn on network discovery. Every time I try, I get message "the specified service does not exist as an installed service. I get the same message for others e.g. file sharing and printer sharing. Changes the most recent have been updated to McAfee a few days ago. But the network worked well until last night.

  Hello

  What is the brand and model of your computer?

  Method 1:
  Based on the network location you choose, Windows affects a State of network for network discovery and opens the Windows Firewall ports suitable for this State.

  Step 1: We recommend you to check if the elements of network discovery are enabled in Windows Firewall. To do this, try the following steps.
  a. Click Start, type firewall and then click Windows Firewall with advanced security.
  b. click on rules of incoming traffic in the left pane and select the (SSDP-In) network discovery and network discovery (UPnP-) in the list.
  c. click on rules of outgoing traffic in the left pane and enable network discovery (SSDP-out) and the discovery of the network (UPnP-Out) in the list.
  d. apply the changes and check the result.

  For more information about network discovery, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-network-discovery

  Step 2: Check the status of the following services: browser, TCP/IP NetBios support.
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, double-click the service computer browser and TCP/IP NetBios support.
  c. change the startup type to automatic and start the service.
  d. apply the changes.

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  I hope this helps.

• I need help, its frustrating me! network discovery does not illuminate.

  my network discovery does not illuminate. Whenever I try to turn it on I get an error message that says: (the specified service does not exsist as an installed service)! I need to elp, its frustrating me! I have windows vista.

  Hello

  Did you change your computer?

  Method 1:

  Based on the network location you choose, Windows affects a State of network for network discovery and opens the Windows Firewall ports suitable for this State.

  Step 1: We recommend you to check if the elements of network discovery are enabled in Windows Firewall. To do this, try the following steps.
  1. click on start, type firewall and then click Windows Firewall with advanced security.
  2. click on rules of incoming traffic in the left pane and select the (SSDP-In) network discovery and network discovery (UPnP) - in the list.
  3. click on rules of outgoing traffic in the left pane and enable network discovery (SSDP-out) and the discovery of the network (UPnP-Out) in the list.
  4. apply the changes and check the result.

  For more information about network discovery, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-network-discovery

  Step 2: Check the status of the following services: browser, TCP/IP NetBios support.
  1. Click Start, type services.msc and press to enter.
  2. from the list of services, double-click the service computer browser and TCP/IP NetBios support.
  3. change the startup type to automatic and start the service.
  4. apply the changes.

  Method 2:

  Now we go ahead and try to enable the discovery of the network on your computer and check for the issue.

  Network discovery is disabled by default for public networks. Changing a network location type to home or work is the best way to turn on network discovery. To learn how to change a network location type, see Choosing a network location. To enable discovery manually, follow the steps below.

  To turn on network discovery

  1. open the network and sharing Center by clicking the Start button, clicking Control Panel, clicking Network and Internet, and then click Network and sharing Center.

  2. If network discovery is off, click the arrow button expand the section, click turn on network discovery, and then click on apply. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  I also suggest you turn on discovery of the network link and check.

  Enable or disable network discovery

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-or-disable-network-discovery

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• WIndows 7 and Server 2008 machines won't remember preferences of network discovery, needs to set every time you start up or wake up.

  Hello

  I was wondering if anyone here could be kind enough to help me solve this situation

  I have two machines Windows 7 and Server 2008 machines remember preferences of network discovery.

  I use the software on the windows server that collects data and information to two windows 7 machines and discover the network is necessary for this purpose

  These machines are set up in an autonomous local network set up as a working group the only other points on the network are none based on PC hardware that fortunately, the server communicates with and reads the data of

  Once network discovery is defined for the network, the system works as expected, but on each startup (or wake up) network discovery is lost and need to be authorized. This is the case at the time windows server 20008 r2 and windows 7

  How can I make these permanent preferences. for that it restarts and re establish communication its self without intervention

  am I missing a setting or if not is there a way I can script the selection preference on each start (/wake) upwards.

  the end user must be able to turn on the system / restart and use it with needing to have any IT / networking of knowledge to the outside to get the system running.

  Thank you for taking the time to read my request

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• How can I disable automatically connects to a wireless network?

  How can I disable the automatic connection on wireless network connection?

  In the lower right corner of your screen, you have an icon with several bars.  It is the WiFi icon.  A click on that and you will see a list of WiFi connections.  Right click the one you want to change, and then click Properties.  Click the connection tab and uncheck the box to automatically connect when the network is in range.  And then click OK.

  I hope this helps.  Good luck.

• Network discovery cannot be activated, windows 7 Home premium.

  This problem is very simple to describe, but I do have a lot of time I can't find a solution. Help appreciated.

  In the network and sharing Center, advanced screen sharing, there is the option to turn on network discovery and file/printer sharing.

  When I put one or both these on 'on' and click on 'save changes', the screen closes without guest or delay. If I open the screen again two options are always on 'off '.

  I checked that the services concerned (DNS Client, Function Discovery Resource Publication, discovery SSDP and UPnP device host) are started and they are.

  Tried to reboot, windows update.
  Network troubleshooting is, as always, useless.

  I suspect that maybe some third party software plays a role here. I checked for malware and removing applications with a network component.

  This is probably related. I get an error 0 x 00000001, when I try and share a local printer.

  Manager tasks shows a two process named csrss.exe running, 936 kb, the other is 6532 KB. A matter of concern?

  All the machines in my LAN on the same workgroup. Not in a homegroup.
  Advice appreciated!

  Complete required wipe problem and re - install to correct.
  End.

• I am unable to stream music to Xbox because the network discovery is disabled.

  Hello.

  We just got a new Xbox and I want to listen to my music to it.  Before asking that my Os is Vista Home Basic 64-bit SP 2 with all the updated.

  Antivirus is Microsoft Security Essentials

  Firewall is Windows Firewall - on, but default settings open the port for the client to the transmission

  The problem seems to be that the computer browser service does not start

  It is configured to start automatically.  Regstry settings show that this is supposed to start.  (MaintainServerList Yes)

  Server, Workstation, and RPC can also be programmed to automatically start.  They do not start.

  I would try to start it in safe mode, but the server does not start in safe mode. For the computer browser does not either.

  When I try to start the discovery of the network, I click Yes and it confirms that I am an administrator.  Refreshes the window and he came off.

  The strange thing is that if I look at the map of the network, I can see the Xbox and our laptop.  But in network, it asks me to turn on network discovery and file sharing.

  I tried to start the service with

  net start "computer browser".

  It was not an error.

  I really don't know what else to try.

  sfc/scannow

  found errors and fixed them.

  Original title: impossible to listen to the music to Xbox because that network discovery is disabled because the computer browser Service does not start

  Hi Ryan,

  Thanks for keeping us posted and share this information with us.

  I would like you to contact XBOX support for help. Your question would be more out there.

  Check out the link-

  http://support.Xbox.com/en-us/

  You can also post your request in the Xbox Forums as well.

  Check out the link-

  http://forums.Xbox.com/xbox_forums/b/default.aspx

  Get back to us if you have other Windows-related issues. We will be happy to help you.

  Thank you.

• In fact, I'm looking for how to disable the discovery network for all profiles (Public, private, domain).

  * Original title: GPO registry key or change

  Hello

  In fact, I'm looking how to disable the network for all profiles (Public, private, domain) discovery and how to disable the file/printer sharing just to the private profile and public with a GPO or a script.

  I ' found some GPO as disable inbound/outbound rules for sharing files/printers and discovery of the network, but I think that a better and more easy solution exists.

  Please can you help me. :)

  Best regards.

  Hello

  According to the description, I understand that you want to disable the discovery network for profiles.

  I suggest refer you to the Microsoft Help Article below and check if that helps.

  https://blogs.technet.Microsoft.com/Networking/2010/12/06/disabling-network-discoverynetwork-resources/

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Configuring the private network or disable questions for the network discovery in network and sharing Center.

  I just got my laptop all cleaned and had everything updated. When I got it back I was mainly concerned how my network and discovery sharing would work, because we never had a home computer and a laptop computer at a time. Our PC at home has always defined for a private network. Today, they are both defined for the private sector, the laptop will probably always be at home too, but I was curious to see how the printer share everything would work on my laptop. It would not print and I checked just the settings that the guy I of any program for me usually had the top settings. On my laptop that I was first checking out and the network discovery has been to custom on both, one on my PC was on, laptop has never been verified we or off, file sharing has been enabled on both. public folder sharing off on both, printer sharing turned off the PC at home, but on laptop, so much time, I guess me to turn on the PC I don't know yet. Printer password sharing is on the PC and laptop. I try essentially whether it is what you would call a custom setting make for a firewall setting, or could someone please just kinda tell me if the sharing of network discovery should be turned on on the laptop and the PC, or was it not suppose to be turned on to the laptop, but on the PC only? Which should be lit and which should not be enabled in the configuration of the private network? I just want to be able to print my laptop if I want to. Thank you

  [Moved from the community centre of Participation]

  Hello

  What version of Windows are you using?

  This article was written for the two Windows Vista & Windows 7.  Drop-down menu (right) allows you to activate Windows Vista Instructions.

  http://Windows.Microsoft.com/en-us/Windows/install-printer-home-network#1TC=Windows-7

• Remove the tick from IPv6 network connection properties

  I need to remove the tick from the properties of the network connection for the element "Version of the Internet Protocol (TCP/IPv6)" or by a script or a registry setting. I found the articles for disabling or uninstalling IPv6, but I have a specific request to remove the tick. If it must be done manually, it is not a realistic solution with the amount of systems on the network.

  Does anyone have a solution?

  Hi Drooza999,

  Thanks for posting in the Microsoft community.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/categories

• Network discovery, file sharing settings keep changing by itself and Alltel to set the network location continues to ask the wireless device

  former title: network location settings. Discovery of NW. File sharing. public folder sharing. AVG 9.0 'tools' and network connections.

  My Alltel Wireless device again set the network location. And continues to change my network settings for the discovery of NW to:, as well as file sharing for: file public and sharing: read-only.  I have AVG Security 9.0 and under 'tools' and connections network shows several svchost with States reading service connections listening and unknown. I don't want no access to my computer and cannot find any computer consultants who can get this to stop. What can I do?

  Hello
   
  1. the options apply automatically on?
  2. have you made changes on the computer recently?
  3. have you installed any Alltel Wireless application to manage network connections?
  4. What is the current network location type on? Is it home, work or public?
  Network discovery and file sharing settings depend on the network location. For examle, if you set the network as a public location it turn on file sharing.  So I would ask you to turn all the parameters and then choose the type of network and check if the parameters change again.
  
  Method 1.
  I recommend you to check if the problem exists in clean boot. May be a third party application is causing these changes.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  Method 2.
  Also check the settings under tools in AVG security suite. You may need to check with the help of AVG on it.
  Or you can disable the antivirus software and check if that causes this behavior.
  Temporarily disable the security software installed on the computer and check if the problem persists.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• network discovery is disabled warning

  How do you turn "network discovery is disabled" alert?

  I want discovery network to be powered off and would that warning stops appearing everytime I open the network window.
  PS, I know, ' why then do I need to open the network window.
  I just do.
  Thank you.

  Hi Tiripon,

  1. is that the computer is connected to a network?

  2 did you do changes on the computer before the show?

  You can check whether the associated network services are running

  a. click Start, type services.msc and press enter.

  b. in the list of services, double-click on ' function Discovery Provider Host ', change the Startup type to Automatic and Start the service.

  c. apply the changes.

  d. restart the computer and check if the problem persists.

  If the computer is connected to any kind of a network, then you can turn on network discovery, and check if the problem persists.

   

  Enable or disable network discovery

  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  Let us know if that helps.

• Impossible to activate permanent "network discovery and file sharing" in advanced sharing without turning windows firewall at the wide service.

  Environment:

  I have a workgroup Windows 8 pro PC with all updates from Windows update. The PC is connected via WiFi (home) to a router (the same thing happens if I am connected to the router directly via RJ45). It's my "private network (NAT). I have the Windows Firewall is enabled in its default configuration. I use "Windows Defender" as my protection\firewall of virus software.  "When I go to: change options for sharing different network profiles" under advanced sharing options. I try to turn on file sharing and network discovery in the private profile. It shows that "the private sector is the current profile. The radio button lights. However, when I go to the file Explorer / network I got the message ' network discovery and file sharing are turned off. " The network computers and devices are not visible. Click here to change... " I click to change, however when I click to change it keeps returning and gives me the same message. I then go in ""network control and Internet\Network and sharing Center\Advanced sharing settings " and the option buttons in private profile for the network discovery and file sharing are turned off."

  If I turn off the Windows Firewall. Everything works. I need to open a hole in the windows firewall for 2 applications was discovered and network file sharing. I opened rather not just blindly ports. However, if this is the only solution, what ports do I need open.

  Hi all

  I have exactly the same problem.  (and I'm not the only one. - There are many!) The problem does not lie with the Windows Firewall. If I turn it off, discovery network and file sharing is turned on-tour he turn it back on and its all disabled subsequently and the rest of the way.  I've been round and round the forums of the world looking for a solution but still find a definitive answer. Can certain software engineering in Microsoft Please arrive at the correct answer.

  Thank you very much

  PT.

• How to disable the setting button in Tools - Options - advanced - network of windows registry?

  Dear support,
  Now, my office has use Firefox as default browser to access the Web server. And there is a policy that users must use ProxyServer. I don't want to change user setting in Firefox proxy. How to disable the setting button in Tools - Options - advanced - network of windows registry?
  Thank you.
  Treky

  You cannot use the Windows registry to disable the elements in Firefox. This link shows how to lock the proxy settings of Firefox, change the values as needed:
  http://www.stbernard.com/ip5kb/iPrism/whatsnew/50SupportFiles/SupportFiles/IP0460.htm

  A change of minor importance, in step 4, instead of add this line to all-js, you can create a file called local - settings.js containing the indicated line and save the file in the same folder as all.js