Disable the Drive on Yosemite property or repair permissions

Similar Questions

• How to disable the driver during the boot process?

  Hello

  I have uninstall a printer from my computer, but when I restart my computer during the process sometimes a back pop up windows and require a response at the prompt of the printer driver I uninstall, but this statement was not disabled or deleted.

  How can I access the startup file to change?

  Thank you

  Hi Reyes,

  Restart your computer and start pressing on the keys on your keyboard. On a computer that is configured to start to multiple operating systems, you can press on the -key when the Boot Menu appears. On the Advanced Boot Options menu, select Disable the Driver Signature Enforcement press .

  

  This will disable the drivers at startup.

  Hope the helps of information provided.

• Problems to show the driver IVI and property loader error messages when you use a type of operator interface

  I use UI operator (programmed in ICB, with asynchronous timer) in the folder OP1 in attached zip file. This operator interface does not have the error message from the driver of the IVI, properts, charger etc. on the screen (messages as in the photo attached error.jpg in zip file attached). Due to stability problems, I use this operator interface, but I need these error message. One other operator interface is OP2 in attached zip file. This operator interface puts the error message from the driver of the IVI, charger properts... on the screen (messages as in the photo attached error.jpg in zip file attached). Now, I want to have this feature with OP1 for reasons of stability I use OP1. How can I implement this in OP1? I tried and tried a lot of time, but I have not found a method to implement this. can someone help me? Thank you kind regards Samuel

  Hello, Johann,.

  I'm not sure you understood my problem. My problems are not the IVI and loader drivers error messages property! But my problem is, that errors of the IVI drivers and property loader operator interface does not bring on the screen. So to test this situation, cause an error of the driver of the IVI or shipper of property, then you can see that with a PC, you have an error message and with another IO no error message takes place and the test of stocks without a message. Do you know why this OI does not show the error messages and how showing the error message can be implemented in this operator interface

  concerning

  Samuel

• disable the driver updated or cancel without saving changes

  I have a question.

  If a glance in one pilot recommended LabVIEW to ' save changes before closing? But I did no seals (only press a stop button, on and offf once again).

  The I want to close the driver without savings.

  Then I can just slect "Save, Defer decision or cancel. Click Cancel, and then it comes every time with this question.

  The closure of the VI, it tells a lot of sub.vi needs to be updated.

  Is it possible to cancel without seals?

  Sincerely, Bernard Arts

  Hi Ben,

  Once again:

  You have the option of reading the reasons why LabVIEW wants to save these screws

  But after saving them remove this dialog box, the next time.

• How to disable the Driver Verifier Manager in vista

  I enabled Manager driver in vista & Verifier.exe installation Verifier, learning by trying. I messed up__how can I disable auditor. Intermediate IM on computers.

  His act to the top of my laptop HP presario / Win Vista Home premium 32 bit, intel pent 2 Dual core / 2 GB of ram, 1.7 GHz Wireless, put on Windows 7 ultimate 32 bit, next week. any help would be well back on what I did.

  329.00 Win 7 Ult

  tried restoring the system 2 x took.

  Thank you, Tony

  Tony

  Have you tried that? :

  Start > type check in the 'Search' box and press 'Enter' > delete existing settings > finish

• I want to disable the motherboard for a Pavilion p6232p video driver

  I need to turn off or disable the driver for the card on mother built in video card in a p6232p of Pavalion.

  The manufacturers motherboard is an Asus IPIBL-LB

  I bought a GE Force 620 Nivida GT video card. I installed it. Then, I ordered a 400 watt power supply to replace the 300 watts delivered with the p6232p. I put everything back together and then I read the installation

  Once again the instructions and I saw that everything built the onboard video drivers supplied with the p6232p had to be disabled. I was frustrated and hung on my monitor for the new card (Nividia GT 620).

  I booted up and everything worked fine. I then installed the CD supplied with the card and it worked as well. BUT! the installation instructions were to remove the old video card or disable any motherboard built

  among drivers. So, that's what worry me because when I started first with the new pc card took control without any installation disc. There is no connection to the old pc blue monitor connector. Maybe I could check the list of devices to see if the drivers are always active. Thank you for your response, cajanpepper

• How to disable the Zooming utility, smoothview, etc.. ?

  I have a Toshiba Satellite M105-S3084 under XP. I would like to disable some of the unnecessary utilities that start at startup and take up RAM as zoom, CEEkey Toshiba utility, etc.

  How can I do this? and always available for manual start?

  There are many programs that delay the startup of windows. Many of them are useless, some are necessary.

  The easiest way is to "prevent" to rely on their own, through Microsoft program: msiconfig.exe

  To get started, follow these steps:

  1) click [START]

  (2) select "Run."... »

  (3) type in the box where it says OPEN :---> msiconfig

  A new program is displayed on your screen, in the top bar you can see the menu option "start".<--- click="" on="" it="">

  Now, you will see a list of applications that start when your computer starts in Windows.
  You can uncheck the programs that you do not want starting on their own, but do not forget to leave most needed.

  If you ask now, 'how can I know which is the safest to turn off?", then you should use Google
  to study for you all the specific "Startup item" which is written on your laptop. Just search for it... (example: KHALMNPR.exe)
  and some Web pages will be displayed telling you, it's the blah blah blah Logitech mouse driver...

  A final note from me: If you want to disable the programs that have parameters inside their 'permit during startup in Windows' (like SKYPE).
  then you must deselect this option in this application. If you disable comes from msiconfig, it will reappear each time you
  manually launch this application.

  Good luck

  chain

• HP ZBook 15u G3 (T7W13EA #BED): the driver installation failure

  Hello!

  So I received this my new ZBook after updatind to Win10 and several tests.

  Should I be concerned or is this normal and should I disable SA HP and continue?

  Best regards.

  

  Jordan

  What you're saying, you did the upgrade of Win10 - I'd be suspicious of drivers installed Ms.

  If it were mine, I go to this page for drivers and check each of the drives against what is installed Win10: http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=8693772 & swLangOid = 8 & swEnvOid = 4192

  And, when the driver was either older or NOT HP, I would setup the HP driver in its place.

  Then, I'd go to Win10 and disable the driver update: http://www.tenforums.com/tutorials/48277-driver-updates-windows-update-enable-disable-windows-10-a.html

  In this way, Win10 can not come and force the installation of the wrong drivers.

  Good luck

• HP ENVY 17 G0U21AV - is there a way to disable the fingerprint reader?

  I use a HP ENVY 17 G0U21AV 8.1 Windows.

  This model came with a fingerprint reader in the lower left corner of the computer. Although this seems to be a nice feature, it is not one that I plan on using (I use LastPass to my passwords). I keep my Palm on the scanner that will bring to the top of the screen for HP SimplePass accidentally part traffic. This can come from the most inopportune moments, and it can become quite annoying always trying consciously avoid the fingerprint reader.

  Is it possible to disable the fingerprint reader?

  Thank you.

  @DSWJoshua,

  Thanks for posting. You can disable the fingerprint reader. For completeness, I'll give you steps to disable the driver itself and the biometric support, so you should not worry about this later.

  To disable the driver, go to control panel, then Device Manager. Expand biometric devices. Right-click on the sensor of validity and uninstall it.

  To disable biometric support, go to the Control Panel, biometric devices then. Uncheck allow users to log on to Windows using their fingerprints, and then save it.

• How can I disable the mouse pad when you use a mouse plug-and-play?

  How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

  Hello

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to disable D drive?

  Hi team,

  I have two login is admin & other is guest. Also, I have 4 partition on my hard drive

  Now, I don't want give access drive D to Guest connection & other player are acesseble to the comments.

  Please suggest.

  Kind regards.

  I have two newspapers with Admin & comments.

  Now the problem is I have not give acess to "D: /" drive local acesseable single user & it is the ADMIN user.

  I have do this as shown below-

  My computer > tool > folder Option > view > removed that check 'easy to use file sharing'

  Now, user account local, I'm not able to drive acess "D" which is fine, but I'm also able to copy/paste any file in the other drive as E: / & F: /.

  Please tell me how I could disable the drive "D" of the local user account.

  Kind regards.

  1. using the Windows Encrypting File System (EFS) to encrypt files is EXTREMELY DANGEROUS, unless you follow thebest practices of Microsoft for the use of this facility .  If you encrypt the files using EFS and lose the ability to access for all sorts of reasons, you will not be able to recover the data.

  2. you are track by disabling Simple file sharing.  The NTFS file system uses "permissions" to control access to files.  Further reading:

  http://www.Microsoft.com/windowsxp/using/networking/security/permissions.mspx

  http://www.windowsecurity.com/articles/Understanding-Windows-NTFS-permissions.html

  http://www.NTFS.com/NTFS-permissions.htm

• How to disable the command CHKDSK - Check Disk start up for Windows 7

  I have some problems, when I start my laptop I am prompted with a black screen saying

  

  I found no solutions on how to disable this on my computer, but I want to because after the seconds say 1, its stays for a while... and I've left on during some time, the screen is still asleep when I turn... The page is black... Can someone help me to disable the calendar checking for windows 7? Thank you very much! : D

  Hi PikaBrian,

  Welcome to the Microsoft Answers site!

  To disable automatic disk checking at the start of Windows through registry, go to the following registry key:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager

  In the right pane, double click BootExecute.

  The default value of the key is autocheck autochk *

  * means that each drive is checked for consistency. Just add /K:C to the end before *. /K switch will disable autocheck on C: drive at Windows startup. If the final value should look like this:

  / k: C to autocheck autochk *.

  If you want to add more drives, the key should look like this: (by disabling the drives C and D)

  / k: D / k: C autocheck autochk *.

  If you want to restore all default, just replace the key with the default i.e.

  autocheck autochk *.

  You can also follow the link given below and check if it is of no help.

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a8ab415b-4559-45C6-99a4-a54e27e5a836

   

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• X230t, windows 8, is not able to disable the entry of finger

  Hi all!

  Recently, I bought my X230t, and I'm pretty setisfied with her. With windwos 7, I used the function to turn off the tap of entry, Contol Panel-online pen and finger input.
  This was really helpful while using the pen to write a lot of things at the University.

  Unfortunately, I'm not able to find a way to turn of the entry of the finger after upgrade to windows 8!
  Can someone help me?

  I google and google, I searched also here, with no result.

  I really miss this feature and I wonder why I'm the only one with this problem...

  Any suggestions or links will be beautiful! : )

  Thanks in advance, Lenovo users! (And possibly everything! :)))) )

  

  Thank you all for your means!

  Well well... After searching and searching, I found solution how to disable the touch of the finger...

  This isn't what I was looking for, but it works...

  I'll show you how do it, think that there may be others like me looking for this feature...

  What we do is open > mouse to my computer right Click > Manage (Verwalten) > Manager (Geraete-) device > Human Interface Devices (Eingabegeraete) > and here 6th HID-konformes Geraet (I'm sorry, I don't know how it's called in English, as my Windows is German...) > open and disable the driver...

  If it's not one 6th grade for you... try disabling one after the other, in HID - blah blah peripheral... you'll realize if that's what you're looking for!

  

• How to disable the Touchpad in processors E7450 and controller

  I read through some more related posts, but I've not seen a laptop this relatively new that we have.

  Previous DELL E series laptops I had, he used to have an icon to manage the properties of the touchpad. I always turn off the "tapping" the touchpad property, leaving only for scrolling. leaving the property look active moves the cursor moved accidentally when you type, causing more problems, especially when doing the programming.

  However, in this new model of E7450 processor and controller, I can't find this same icon.

  In any case, I set the properties for the touchpad? I don't want to totally disable the touchpad, just tapping property.

  Nice day!

  Please write on the Dell Community Forum!

  In this matter I ask you to confirm if you have tried the Dell touchpad utility and then tried to make the desired changes.

  

  Once touchapd is installed, you should be able to view the Dell touchpad utility to make these changes, click here for the link to the update of the touchpad.

  Reply to this message, that if there are questions more, we will be happy to help you.

  Sincere greetings,

• After the migration to the new iMac 10.11.3 - unable to repair permissions on your Photos App library

  I bought a new iMac running El Capitan and migrated from my old iMac running 10.6.8 and opening of the Photos app after migration ended I see the error "failed to repair permissions on your library. Initially, when I open the Photo app, I'm asked to select the library migrated or create a new. I select the library migrated and then see the above error.

  I tried on my new iMac running disk utility, and there is no error reported. "I tried too hold down the command and option keys when opening the Photo app and I go as far as the window pop up prompting me that" you are about to repair of the 'iPhoto Library' library but after selecting the repair, it returns the error "year error occurred while repairing permissions" and citing is the only option given.

  I then tried to go back to my old iMac and did a full rebuild of my photo library using the command and option keys when opening iPhoto App and also ran disk utility. Then I made another backup from time machine fees and moved once more to my new iMac. This has not improved the question, and I see the same mistakes.

  I also tried the iPhoto App 3rd party download manager but it does not allow me to open the application because it returns the error iPhoto Library Manager, must have iPhoto 8.1.2 or later must be installed. Of course when you run 10.11.3. My App Photo conforms to this requirement.

  I am really confused on this issue and would appreciate any help or advice for this problem.

  Kind regards

  Brian

  you have 90 days free telephone support from Apple with a new iMac.