Disable vibration while SMS using the touchscreen?

Similar Questions

• Satellite A660-133 - Vibrations when I use the keyboard or a touchpad

  Hello
  I have a Satellite A660-133, when I use the keyboard or the touchpad I can hear a lot of vibration from the stop of the laptop. I think that this is not normal, but actually the same model showed in the shop does the same thing. What do you think about this?

  Is there anyone who has this model and who is able to tell me what is its experience in this respect?

  Thank you!

  Hi davmat,

  I m not Satellite A660 owner, but a friend told a. He never spoke to me such a problem expect that s a great notebook with powerful hardware and he likes the design. I agree with him that s a great notebook from Toshiba!

  Anyway, if you think that it of not normal, you need to contact a service provider authorized in your country. Guys can check this problem and maybe you need a new keyboard, but this can be exchanged under warranty.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• How to disable tabs in DC using the registry?

  Hello

  As you probably know, Adobe Reader DC has a problem where it freezes when you switch between multiple PDF files that have been opened with tabs. This problem seems to be widespread (we were able to reproduce the problem on 10 + PCs in my environment). There are other users complaining about the same problem, as in the thread below:

  Re: Acrobat Reader DC crashes when several PDFs are open and I spend them.

  Until Adobe fixes the bug, the only solution I see is to disable the tabs feature. Is it possible to disable the tabs using the registry? Is it possible to do using the Customization Wizard?

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\DC\AVGeneral]

  "bSDIMode" = DWORD: 00000001

• While rmi uses the RMI-IIOP and JRMP protocols?

  While RMI uses RMI-IIOP and JRMP protocols, why do we use rmi:\\local while getting the reference to distance or server object?

  While RMI uses RMI-IIOP and JRMP protocols, why do we not use rmi:\\local

  1. we do not have.

  2. we use rmi://host/obj.

  3. we use in RMI/JRMP, and that when we use Naming.lookup ().

  4. for RMI/IIOP, we use iiop: / / in collaboration with JNDI.

• Impossible to use the touchscreen to P40

  Hello

  I can't use the touch screen on my Thinkpad Yoga P40 more, which is perhaps in computer mode laptop or tablet. I bought this product four months ago. I don't see where this problem might come, and I couldn't find a solution online.

  Any advice on how to make it work again?

  Thanks in advance.

  Kind regards

  FabienC

  If you go into control panel Device Manager-->--> Human Interface Devices, you see an entry that refers to a touch screen?

• Document feeder disabling in order to use the flat bed scanner

  I would like to be able to use the portion of my printer for items too large or too large to fit in the document feeder. I have a Photosmart C309a with my Mac. I'm trying to do my job on the printer not through any software. This feature worked before and I don't know why he stopped. I am trying to 'copy' and reduce a magazine article, but the feeder whirs and whirs, then the message's Original Jam, reload the document etc. There is no paper in the tray, it is on the flat.  Any help is very appreciated.

  I wouldn't give up. So for someone else with the same problem, that's what I did. I "restored by default" and the document feeder does not activate automatically, however, it didn't complete the process 'copy' and print my document off the Board either. It is in an infinite loop, so I had no choice, but to pull the plug. I received the message telling me not to do so, as if I had another choice. I waited a minute or so and plugged back in and I was able to copy, cut and print the document on the scanner.

• Direct scan to email using the touchscreen working even if test in EWS was successful

  Hello!

  I try to get the email function works with the M425dw of MFP HP LaserJet 400 direct scanning but have failed so far.

  To make this feature without a computer other than the WLAN router is required to run since I use the wireless option. However, the operating system of my laptop is Windows 7 Home Premium.

  By using the browser or the client of HP Toolbox to configure the built-in web server (EWS) and test the direct scan to email function works perfectly. I get emails in my Inbox that confirms that the configuration is correct. However, whenever I try to send a scan to email using the touch screen I see that messages saying that it connects with the mail (SMTP) server, sending to the e-mail selected, the last message on the screen indicates that the connection has failed and that I should try later but without success.

  I have the latest firmware installed, tried the ADF - without success. Scan to USB works fine.

  I hope someone has an idea of what to try to get this great work featured.

  Marcel

  I had to realize that the problem is not necessarily related to the printer. Even if, by executing a test by sending an e-mail with an attachment from my laptop using exactly the same email configuration succeeded.

  Anyway, once I changed the SMTP from a different provider that has worked.

• "Enter password" calls while debugging using the 4.2.2.66 (8830-Verizon) Simulator

  If I click on "Start the Simulator" the Simulator works well, but I'm trying to connect to a debugger, I get the following message:

  Password

  If I don't get anything, the debugger connection times out.   I tried things like "password" and "blackberry", and the debugger just disconnects.  I've debugged using dozens of other simulators, and I have never seen it before.

  Anyone know why this is happening?

  Thank you
  Mark

  I believe that I have found a workaround.  I use the 4.2.1 JDWP.  If I use the JDWP 4.7.0 instead, I do not receive the password, and the debugger attaches successfully.

• Y at - it a keyboard shortcut to break the handles of the points while you use the pen?

  When you use the pen tool, it smooths the points that you add, but sometimes I'm not, so far, the only way that I was able to fight against this phenomenon is using pen, press V to switch to the selection tool, click to deselect the path, and then press P to use the tool pen once again and then again by selecting the end point.

  This process becomes very annoying during long projects, and I hope that someone will be able to solve for my.

  (I want more precisely the keyboard shortcut for Mac, but it would be good if you could give the PC keyboard shortcut too for other people looking at it.)

  Use the Alt key to move to the anchor-point-conversion tool temporarily. Use the command key to proceed to the last used Selection tool temporarily

• Could not open the charms bar using the touchscreen

  I installed Win 64 8 months last on my laptop HP 2760p convertible.  Stylus input has always worked well, but touch has always been a little uneven and sometimes does not respond to the entry for a few seconds.  But the touch has really become problematic.  What's weird, is that he seems as follows: behavior weren't that occasionally and now almost always happens:

  My touchscreen will be no entry of reception on the right side of the screen where the bar of charms 'lives '.  So I can not open with the key.  If I drag an area of selection on the desktop, it will end exactly at the edge of where the charms bar would be.  It seems that my touch is actually closed - out of this area of the screen.  That's exactly what this type of watch: http://www.youtube.com/watch?v=ADXDu8CjCuc#t=1m48s

  .  Frustrating that he says he got it solved thanks to the support of HP and won't share what is the fix.  HP support was not helpful to me.

  More information:

  Recently, I uninstalled a lot of pilots (including the removal of hidden devices / ghost) for hp quicklaunch/hotkeys, video, touchscreen, touchpad.  I basically let windows install the default drivers of the gournd upward (like touch was working well last month).  Still no go.

  If I rotate my screen in portrait mode, then the shot of charms bar actually seems to work (!) and the top of the screen (where the charms bar would live in landscape mode) will not receive touch input.  It seems therefore that the physical appearance of the screen.  However, he sometimes works in this area, so I know the screen is able to receive touch them there.

  Any help would be greatly appreciated.  I'm going crazy...

  -Alden

  This problem appeared on my HP Sleekbook that I bought yesterday. Thought I was crazy, because the right side of the screen worked fine initially. As suggested by Robert, I have reset the calibration of the screen and that solved the problem.

• How to reinstall windows xp service Pack3, while I use the disc no. SP?

  I found a real problem with .net framework which needs to reinstall windows xp. But I found a problem with reinstalling too. When I restart the system and boot on the CD it only reboot the system which is installed! And I don't want to install a new session of xp. Can you help me?

  Viktor,
  PS Sorry for my English

  Hi Victor,

  There are a few options here: http://social.technet.microsoft.com/Forums/en-GB/w7itproinstall/thread/e30d920f-ddd9-42a0-9357-ff2b67c9e221 and here: http://social.microsoft.com/Forums/en/whsvailbeta/thread/af946ffc-9eb5-4b82-b4c0-5844d176a661 that can help

• Zoom in & out while using the pointer - this function can be disabled?

  Hello all - I need help please. Most of the time when I use my new HP laptop, while I use the mouse Touchpad Square that moves the pointer on the screen, often, sometimes the screen zoom in or out. I found a function of zoom on the laptop, but I can't find anything that says "turn off the zoom feature. Do you know how or if the zoom feature can be disabled touch pad / mouse? It is very annoying to all means must adapt to my zoom, thanks-Tim

  Hi Tim,.

  Try the following.

  Open windows control panel and on the top right, next to the display by: select "large icons".  The new layout, select the mouse option, then the tab setting ClickPad (or device settings), and then click the settings button.

  The option you're looking for is called "Pinch Zoom" (see image below) - remove the check mark next to this entry, and then click apply and then click Ok to save the setting.

  

  Kind regards

  DP - K

• Satellite L310-D4010: OS became dead slow while using the CD/DVD drive

  Hi all

  I bought Toshiba Satellite L310-D4010 in chennai, India.

  It has 2 GB of RAM and processor 1.83 GHz Intel Core 2 Duo.

  But my system became * slow * while I use the optical drive, that is, when I write a disk and copy the content form the drive.

  I was not able to open any application while I am using the DVD player.

  Please guide me to solve this problem.

  Thanking you.

  This is nothing unusual.

  My windows system is also busy when burning the CD or DVD!
  The point is that most of the resources of mobile phone as a disk, CD/DVD player, RAM, CPU, etc. are necessary and run it with maximum performance during this procedure and to be honest not advisable to work with the laptop during a burning, because this may affect the quality of combustion.

  In my opinion there is noting wrong with your laptop, but if you want you could check if some process is not required are running in the background of the OS.
  In addition, you may disable auto-start for some non-material applications while the Windows start the process.

• Windows XPS computer laptop who don't return of touchscreen will switch to use the keyboard as a normal laptop.

  I have a laptop XPS windows on Windows 8 with a touch screen, I have two problems.

  The first problem is that I can't understand how to go back to using the touchpad and mouse on the surface of my laptop to use the touchscreen, making it more difficult to navigate in my laptop I can not directly click etc.

  The second problem is that when I flip my round screen to use the laptop as a Tablet, I can't get it to produce a portrait view and not a landscape that is bad for watching movies and annoying when browsing websites.

  Help to one or two questions would be appreciated, thanks.

  Hello

  Thanks for posting your query on the Microsoft Community.

  If I understand correctly, you want to return to use touchpad and mouse and also have problems with the display as well.

  This issue may have caused due to recent changes to your laptop.

  I need some information to move forward.

  1. What is the model of your laptop?
  2. Have you tried the troubleshooting steps to resolve this problem?

  I suggest you to install the latest drivers for the touchpad and display adapters.

  Check the following link below.

  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  I hope this helps. Please let us know the results. We will be happy to help you further.

• Use the Magic Trackpad to Bypass built in Trackpad

  Genius diagnosed bad trackpad in my MacBook 2012. Rather than sending repair ($310), I bought Magic Trackpad 2 to work around the problem. Engineering directed me to go to the preference of accessibility, and then click "Ignore built in mouse or trackpad when wireless trackpad is present." I've had that happen and that you can use Magic Trackpad 2 to point and click HOWEVER no other features are available. I can't tap, pinch, rotate, etc. When I click on Preferences of the Magic Trackpad 2, I see a screen indicating that the trackpad prefs are disabled, with no way to turn on the features of the Magic Trackpad 2. Anyone know how I can release all the Magic Trackpad 2 features while ignoring the built in trackpad?

  As long as the built-in trackpad is not interfering with your comments in a way (for example causing unwanted movements of the cursor) I would have thought you could disable 'ignore' and just use the external trackpad.