Disable vMotion for Exchange CCR

Similar Questions

• Disable vmotion for 1 virtual machine in an ESX host

  Hello

  We have an ESX environment that is configured with vMotion.

  As a result, I've seen VMs from one ESX to another very frequently.

  Among these virtual machines, I have a very critical virtual machine, I want to move to any other host ESX.

  Y at - it an option that I can use to disable VMotion only for this particular virtual machine of mine (in order to keep constant on the ESX on which it is right now) and allow the other virtual machines to continue.

  Appreciate your help.

  Thanks in advance

  I guess that your VMS migrate between ESX servers because configuration automated DRS ESX cluster level. You can replace it for a specific virtual machine. Cluster of right click Select-> "Settings"-> click on options of the Virtual Machine under VMware DRS,. On the right, make sure 'Enable the levels of automation individuak virtual machine' is checked. You can see VMs list below. Select the virtual machine that you want to replace and change the level of automation for people with reduced mobility

• In-Guest iSCSI for Exchange 2010

  Hi, we just built and are ready to go into production with Exchange 2010 using LUNS in guest through the card Microsoft iSCSI initiator iSCSI separate network for iSCSI etc. Load tested with JetStress and everything seems fine. We just found out as snapshots are not supported with iSCSI in guest so we are concerned that the other things work or be taken in charge or another, i.e. of vmotion. So, does anyone know if we lose any other characteristic, and we need to change our minds and using ESX iSCSI? I read pieces on being comparable, that we stuck with a guest performance because that's what we know with our existing Exchange 2007 environment (physical). If we must change, is it simple?

  Hey everyone who is following this thread or found via Google.  It is important to understand what is and is not supported when you are running Exchange on a virtual machine.

  To be absolutely clear, combining Exchange 2010 DAG and migration technologies such as vMotion technology is supported.  You must ensure that you are running at least Exchange 2010 SP1 as well as a version of vSphere that sits on the server virtualization Validation program.

  I think that the link was already posted, but here is the final link:

  http://blogs.technet.com/b/Exchange/archive/2011/05/16/announcing-enhanced-hardware-virtualization-support-for-Exchange-2010.aspx

  More specifically, since the post above (in bold italics):

  Combining Exchange 2010 high availability solutions (database availability groups (DAG)) with hypervisor clustering high availability and migration solutions that will be moving or automatically failover servers for mailboxes that are members of a DAG between clustered root servers, is now supported.

  Improved, that we did in Exchange Server 2010 SP1, with more comprehensive tests of Exchange 2010 in an environment that is virtualized, we are pleased to offer this additional deployment flexibility to our customers. Management of updated support applies to any provider of hardware virtualization that participate in the Windows Server Virtualization Validation Program (SVVP).

  Logiboy123, can you provide any documents to support the statement that Microsoft does not support this configuration?  The above quotes are directly from Microsoft and are very clear that they support not only the migration of Microsoft technology, but also similar to any other provider of the hypervisor technology, provided that they are in the SVVP program.

  Since vSphere is part of the SVVP, Microsoft has extended support for the technologies of migration such as vMotion, in addition to their own Live Migration.  Of course, simply support something does not automatically make it works.  If you want knots vMotion DAG works correctly, you might have settings described in this blog post extended the cluster heartbeat timeout (also a fully supported configuration change):

  http://www.thelowercasew.com/vSphere-and-Exchange-Admins-can-live-in-harmony-Microsoft-finally-supports-HA-and-VMotion

  To answer the original question in this post, using the Protocol in-guest iSCSI is supported and with vMotion in this configuration is supported as well.  You're not really 'give up whatever it is' using this configuration well so if it meets your needs, I would stick with it.  I prefer generally VMFS just because of the flexibility it offers, but all the world has different requirements and I have absolutely no problem with guest iSCSI if your organization requires it.

  Do not forget that whatever configuration, snapshots of virtual machine are not supported for Exchange. Here is another post which goes into detail on it and cover the declaration of support for Microsoft Exchange 2010 snapshots and machine virtual: http://www.thelowercasew.com/virtual-machine-snapshots-and-tier-1-apps-not-always-supported

  So in general, I would say that provided you are running the correct versions of Exchange and vSphere must then take full advantage of your configuration to use features like vMotion and HA without problem.  If you adjust your settings accordingly cluster heartbeat timeout, you should have no problem using vMotion with your knots of DAG.

  Matt

  http://www.thelowercasew.com

• Disable Vmotion, the SVmotion and cloning in Vmmark 2.1

  Has anyone disabled Vmotion, SVmotion or cloning Vmmark 2.1 in the VMMARK2. CONFIGURATION file for the purpose of comparative analysis to a single host or a different hypervisor platform benchmarking? Looks like it has an option to comment on specific workloads like Deploy/Templates or deploy/DeployVMs in the VMMARK2. The CONFIGURATION file and I was wondering if anyone has ever tried this process successfully.

  Greetings!

  In the file VMMARK2.config the INFRASTRUCTURELIST line specifies to DEPLOY, Vmotion and default SVMotion.

  By setting the value of string equal to INFRASTRUCTURELIST = "", you can simply run the workload by tiles (and do the tests more hypervisor agnostic).

  Hope that helps,

  Davis

• Disabling alerts for individual calendars in iOS 9

  Hello

  Is there a way to disable alerts based on calendar in the calendars on iOS 9?  I would like to disable alerts from home on my iPhone, but yet to receive for the work schedule.

  This used to be possible in the iOS 8 by clicking on calendars to display a list of all calendars, tapping the Red I beside work or home and then scroll to the option for Notifications-> alerts of event with a toggle switch.  It no longer appears in iOS 9 and Notification Centre options seems to be all or nothing.

  Any suggestions?

  Hello rechape,

  Thank you for using communities of Apple Support.

  I understand your message that you want to disable notifications for each calendar, but cannot locate this iOS settings 9. I, too, like customize my notifications for calendars. Here's what I recommend:

  

  

  1. to turn off notifications for a specific calendar, press the calendar application.

  2. tap on that Word calendars located downstairs at the center of the page.

  3. scroll down to the section iCloud and Red tap I in a circle to the right of the calendar you want to disable notifications for.

  4. scroll down to the Notifications section and slide the switch to the right of the event alerts.

  Best regards

• Is there a way to disable notifications for specific people or focus groups, without disabling notifications for everyone? (in messages)

  Is it possible, in messages, the rotation of notifications for specific people or groups of discussion, without disabling notifications for all incoming messages? I sometimes have a lot of messages from my daughter and my phone buzzes away all the time which can be annoying. I don't want to disable notifications entirely or do it on the silence on the other I miss important messages form other people.

  You can enable do not disturb on an individual message, but which will shut down the entire conversation if it's a group. This is not the same as activation do not disturb for the phone, which disables all notifications. Open messages, select the message in question, in the upper right, click details and then scroll to the bottom, you should find the switch to do not disturb.

• Anyone know how to get a license for Exchange Server 2007?

  Exchange Server on Windows Server 2008

  Hello

  Does anyone know how to get a license for Exchange Server 2007. I've been on the Microsoft Web site, and it is only showing Exchange 2010.

  Thank you

  Hello R McMullen,

  The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• I have a single open for Exchange 2007 Standard how license get the product key

  I have a single open for Exchange 2007 Standard how license get the product key

  For assistance, please contact the administrator of your Open License program.

• How can I disable search for it invdexing?

  How can I disable search for it invdexing?

  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools , then Services. Scroll down for Search of Windows, do a right click, choose Properties.

  The value of starting off. Click on stop.

• How to disable IPV6 for the LOOPBACK address in windows vista

  Hi all

  I have problems in ASP.NET when running any site due to IPV6 alias for the loopback address

  So I need to know how to disable IPV6 for the LOOPBACK address in windows vista

  Help, please

  http://www.lboro.AC.UK/it/Vista/IPv6.html

  There is a record for this difficulty to the bottom of the page above for Tunnel and loopback interfaces...

• DEP DEP is triggered when I try to use MSWorks. When I try to disable it for this app it says that it cannot be disabled

  DEP

  DEP is triggered when I try to use MSWorks.  This has just begun.  When I try to disable it for this app it says that it cannot be disabled.  What is going on?

  Try this:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  Above is a tutorial on how to turn off DEP for a particular program.

  See you soon.

  Mick Murphy - Microsoft partner

• Installation of Foglight for Exchange 2010

  Dear all,

  I downloaded Foglight for Exchange on DELL site, but I found that files html, zip, and car and could not find any file (exe/msi etc.) so guide which miss me to deploy foglight for Exchange.

  Thanks in advance

  Kind regards

  Hussain

  You will need to install the cartridge change and then configure agent/s to monitor your environment.

  Given the fact that you are not familiar with Foglight, you will need to get technical assistance d safe g involved working with you at this stage. Continuing this thread of discussion won't be effective.

  There is also a list of pre-requsites that need to be configured on the target Exchange server/s for our agent to be able to successfully complete:

  http://eDOCS.quest.com/vFoglight/800/files/FoglightForExchange_5.6.9_ReleaseNotes.html

• behavior of application with BES flavours IE for Exchange, Domino and GroupWise.

  Hello

  I have a java application to networking than woks with BES for Exchange. Can I assume that the same application works also with other i.e two flavors Domino and GroupWise.

  my application uses MDS and makes use of the BES network.

  Please clarify for me.

  Thank you

  Sri.

  The Mobile Data System (MDS) component of BlackBerry Enterprise Server offers the same features for Exchange, Domino and GroupWise flavors.  An application using the SDM as transport should work the same, regardless of the messaging platform.

• Cisco ISA disable antivirus for the specified area

  Hi I want an option to turn analysis antivirus for a specified area.

  'Political IPS and control protocol' has this feature where I can choose what areas to include.

  I noticed that I couldn't update my ps3 and download a 100% and never collapsed. I tried like 5 times.

  After that I have disabled the antivirus download scan went well. But I don't want to disable it for all areas, just the area my ps3 is in.

  Please consider adding this feature to the next version of the firmware.

  BR

  Hello

  Could you try with these two options disabled in the advanced settings of the antivirus?

  (1) disable the HTTP resume

  (2) turn off the FTP resume

  Kind regards

  Wei

• Selectively disables predictive for a single < input type = "text" > element?

  I tested my web applications in a PlayBook, and I encountered a problem with my input structured fields. To manage the user hidden input, I intercept events keydown and keypress at low altitude and build the text, character by character. Input predictive breaks this logic by entering these key events. You can see the general issue in this JavaScript test page:

  http://unixpapa.com/JS/TestKey.html

  When you type into the entry field, no keys are reported.  (Compare with a desktop browser to see the expected events).

  Apparently, Java BlackBerry developers can control this feature to the individual field level by setting the option "TextField.NO_COMPLEX_INPUT" on a TextField:

  http://StackOverflow.com/questions/7341482/can-i-turn-off-predictive-input-for-EditField

  Is there a property, I can put on aelement to indicate the BlackBerry browser to disable predictive for this field? In this test, I found that I can make it work through the expedient of extremely awkward to enter the keyboard settings before you turn off 'See the predictions and suggestions' in the world, but it's probably not realistic to ask the users to do this.

  Awesome, couldn't be easier.  I just confirmed that it fixes my editing structured in the PlayBook browser controls; Thanks Adam!