behavior of application with BES flavours IE for Exchange, Domino and GroupWise.

Similar Questions

• Registration of a client device in a java application with BES/MDS

  Hi all

  I put this thread here that my application is a java application, but it could have also listed under the section development push as well.

  I have a part of my application that needs to connect to the BES to a certain company to receive push messages. The app works fine establishment of a listener and receiving thrusts by the MDS Simulator, and I also added more code to register the device with the BIS (BPA) from BIS example of Simon Hain.

  Initially I thought that the he had to register with the BES, just like how register us with the BIS except change some settings, as do not add an app ID etc. I have created a basic application of the Z10 push and remember that coding is the same for the BIS and BES except that the application ID and address BIS have been left blank. But now, after some research, I think with Blackberry 6/7, to onboard with a BES connection (unless a middleware program requires us to send some data onboarding) to receive a Push message, we just open a connector to the port number using the deviceside = false setting and wait for help to arrive.

  I looked on the net and forums to directly answer this question but can't seem to find one, that's why I'm asking here confirm.

  Quite simply, taking example of Simon for base, if I plug a client device to a BES (where the server application didn't need any onboarding of the device, its function is to, just send a message to the JSON style to the MDS with the device PIN to the device) would need to register the client with BES/MDS device, as Simon does with its function of registerWithBpas() to register with BIS/BPA , or could I just go directly to opening a connection to a port with the parameter; deviceside = attached false and wait for a Push message to arrive.

  Of course the devic has already been saved in the BES with its ID, e-mail address of the person using this device, etc.

  Simon if you get a chance to personally respond to it, that would be great!

  Thank you all for your time and your help.

  Rob

  Do not enter the unit, simply push the spindle for the MDS and push message will appear on the device.  As you rightly point out, the device is already on the BES and must use the MDS to access the internet in any case.

• I can't see a message from my Union because of problems with the address changed for pop-upwindows and some other issues

  Hello
  I am from Sweden and I have problems with a Web site that has my Union. I could see messages from them before, but they changed their address and on the site, they say people that they must put the new address on the approved list of the pop-up windows. I did but it still does not. Maybe I did wrong, I don't know, but it's annoying as hell that I can't see the messages they send.

  I really need help with that.

  Best regards
  Lena

  You can control and manage permissions for all areas on the Subject: authorizations page.

  • https://support.Mozilla.org/KB/how-do-i-manage-website-permissions

  You can delete all data stored in Firefox with a specific area through "Forget this Site" from the context menu of the history entry (see the history or the history sidebar) or via the subject: permissions page.

  Using "Forget this Site" will delete all data stored in Firefox in this area as bookmarks, cookies, words of past, cache, history, and exceptions, so be careful and if you have a password or other data from this area you don't want to lose so take note of these passwords and bookmarks.
  You can't recover from which "forget" unless you have a backup of the affected files.

  It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

• How can I change the registry values with a common search for the string and replace the function where I don't do all manually?

  Due to problems of space with my installation of XP Pro, (operating system has been installed on a 4 GB partition and I did have a copy of the OS to do a new installation) I am trying to move a number of files on a mounted drive.

  It is a way to search an entire record of [SPECIFY FOLDER] "C:\Program Files\" instances and replace each with "C:\Program Files\Overflow\ [SPECIFY FOLDER]" as a common discovery replace function?

  Also, I'll have to move several "Common Files" files in the mounted folder 'Overflow '. The method to make learning one should help me to do both. Manually, it will take most of thousand years that all the files in HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components
  the files seem to have a key value have changed.

  I have already uninstalled and reinstalled some programs at the desired location, but many still use the "Common files" folder despite my having already changed the default installation directory path in the registry. Any help would be appreciated.

  Thank you

  NORTH CAROLINA

  One way:

  1. Start Regedit (start-> Run-> 'Regedit')
  2. Select the branch of the registry, or you are interested in changing.
  3. The export of this branch of the registry (file-> export) in a ".reg" file
  4. Use a programming editor (for example, the freeware Notepad ++) and use the "Find and replace" function to make the changes you want.  Save the modified file.
  5. After making the changes, double-click the .reg file to fold changes in your registry.

  As always, keep a backup of your original registry in case things get really bad and know how to do to restore this backup your machine should not be able to start.

  Notepad ++: <> http://notepad-plus-plus.org/ >

  HTH,
  JW

• I get the error 0x800ccc92 with Windows Mail asking for my username and password.

  The username and password I used does not work.  How can I get my username and password or implement new?

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• "I use CS2 in Windows XP sp2, 32-bit, interested in CS3 &amp; tried to download &amp; install, giving message" "code error 1720" problem with a script required for this installation and windows package install ".

  Currently I am interested in CS3 & CS2 user, so I doenloaded CS3 but gives the time installation message "Error 1720, there is a problem with this windows package install." A script is required for this installation to complete, contact technical support.

  Google search for help with the problem of Windows...

  https://www.Google.com/search?q=Error+1720&SourceID=IE7&RLS=com.Microsoft: en - US: IE - address & ie = & oe = & gws_rd = ssl

• How to configure the operation of asynchronous service with local local routing for the sending and the receipt of the request on the local node by default?

  I am facing a problem in the configuration of customer service operation which is asynchronous and has a local-to-local routing. When you try to configure that, it automatically assumes that it is an outgoing request.

  However, I want to treat it as an incoming query I want to send and receive the application on the same node.

  Can someone let me know steps?

  For an example, take a look at a tutorial I wrote on the Integration Broker.

  You can now download the tutorial for free including some source files:

  Broker integration for PeopleSoft Developer databases. Blogging about Oracle Applications

  Especially take a look at Chapter 5, where I describe the steps you must take to create a custom incoming service call this service of the PeopleCode. If you send a received message to PeopleSoft.

  The tutorial uses a synchronous service operation. Asynchronous replacement, the Manager of service for OnRequest to OnNotify.

  I hope this helps.

  Kind regards

  Halin

• With Air 3.4 for IOS, how iPhone 5 are they treated?

  I've developed an application with Air 3.4 for IOS and it seems that the iPhone 5 automatically centers the application using the settings of the iPhone 4 960 x 640, rather than 1136 x 640. Is this correct? I have full-screen enabled in the settings of my 3.4 Air.

  If you include the splash [email protected] image, which would be a 640 x 1136 (your boot of landscape image rotates 90 degrees), it is enough for the iPhone 5 knowledge to fill the entire screen.

  However, if you have downloaded the app to iTunesConnect then, it would probably fail. This is because the standard AIR 3.4 ADT.jar file does not use iOS SDK 6.0. You can move using AIR 3.5 (http://www.adobe.com/devnet/air/air-sdk-download.html), or by getting the patched the ADT.jar file version (see this thread: http://forums.adobe.com/thread/1073656, in particular the "correct" answer upward).

  Once you have built with either 3.5 air, or used the ADT.jar of AIR 3.4 patched version, and you have the picture of [email protected] included, everything should be good.

• Don't boot to desktop-Boot computer ups always come with "no input signal" for monitor

  Thanks for the research on this issue.  So first of all, he could start after a few attempts in the end goes to the blue screen error at approx. 5 min. I started this path several times that in "safe mode with network" to try the many suggestions of repair for two days. " At this point, it's freezing just at "windows is loading files", but probably will go to blue screen error. Boot ups always come with "no input signal" for the monitor and signal switching in the Help menu for 5 min periods I've mentioned and then fails or "monitor going to sleep" occurs.

  The error messages rec'vd: corrupted image, corrupted file and header file check sum does not match the sum of computer control. The recommendations of the screen blue: disable the BIOS memory, any material current or drivers and check disk space.

  Some tent to fix: memory diagnostics and it showed 'no problem', checked monitor on another computer and it works, in a session of 5 min a download to 'fix' Microsoft via a USB problem like "search of windows crashes" but was 'unable to set', a few other attempts would show the "windows installer has stopped working" preventing any action.

  At the present time, am unable to start even with advanced at F8 options.  It's HP Pavilion 10/2007, with the help of HP. Its on a wireless network with a netbook, Blu - ray, occasionally a cell phone that works on windows live but none presents as a device.

  Hello

  ·        You did changes to the computer before the show?

  ·        What is the exact error message that you receive?

  Method 1: Remove the external devices except the keyboard and mouse and try to restart the computer in safe mode and check if you can start inside.

  If you are able to boot into safe mode then try a restore of the system it and check if it helps solve the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2: I suggest you do a system recovery options system restore and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 3: If the system restore does not help then do a startup repair and check if this solves the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• Should what code I for button next and prev with jquery image slider bgndgallery full screen

  Hello

  I use a jquery opensource bgndgallery (http://pupunzi.open-lab.com/mb-jquery-components/jquery-mb-bgndgallery/ for a slider image full screen with my project of adobe edge.)

  The bgndgallery full-screen works with my project of edge.

  In the CreationComplete I put the following code and when I set the autoStart to "true" the cursor works:

  $. mbBgndGallery.buildGallery({)

  containment: 'body ',.

  effect: 'slideLeft ',.

  autoStart:false,

  timer: 3000.

  effTimer:1500,

  controls: "#controls."

  images:]

  images/cover.jpg"."

  "images/p1.jpg.

  ],

  :function() {onStart,

  onPause:function() {},

  onPlay:function (opt) {},

  onChange:function(opt,idx) {},

  onNext:function (opt) {},

  {onPrev:function(opt)}

  :function() {onStart,

  onPause:function() {},

  onPlay:function (opt) {},

  {onChange:function(idx)}

  onNext:function (opt) {opt.effect = "slideLeft"},

  onPrev:function (opt) {opt.effect = "slideRight"}

  onStart:function() {$("#controls.play").show (); $("#controls.pause").hide ()};

  onPause:function() {$("#controls.play").show (); $("#controls.pause").hide ()};

  onPlay:function (o) {$("#controls.play").hide (); $("#controls.pause").show ()};

  onNext:function (o) {o.effect = "slideLeft"},

  onPrev:function (o) {o.effect = "slideRight}.

  })

  But I want to control the cursor background with next and previous button. Then, when I click on the

  button in Adobe Edge. The cursor slip right left. I tried many things but nothing works.

  And I'm not very good in coding, I'm more a creator.

  There is a number of things I've already tried:

  the following button, I put the following code in the 'click ':

  $("body").slideLeft ();

  I found the following code for a closing fade in and it worked, but this isn't what I want to do:

  $("body").fadeOut (function () {$("body") .html (caption [idx]) .fadeIn ()});

  The script for the jquery.mb.bgndGallery you can find it here:

  jquery.mb.bgndGallery/mb.bgndGallery.js to master · pupunzi/jquery.mb.bgndGallery · GitHub

  So I hope that someone can help me with the correct code for the next and previous buttons.

  Thank you

  I made a small taste and share Dropbox - slider.zip

  Basically, the 'controls' property must be the selector of the node "container" for controls and controls should have the names of class as "prev", "next".

  Check the section "HTML, manufacturer of controls" on this page - Home Wiki · pupunzi/jquery.mb.bgndGallery · GitHub

  DIA-

• How to deploy an application with free files on BES or others?

  I'm curious to know if there is a way to deploy an application with a loose settings file.

  My goal is for customers to deploy the app after that that they have made changes to a settings XML file.

  After the changes to the XML file, the customer could deploy via BES or another method.

  Is this possible?

  I wrote several .net applications that use XML settings files in bulk / external and I want to acoomplish the same thing.

  Tips, advice or ideas are greatly appreciated.

  Thank you

  My current development environment:

  Eclipse 3.4

  BlackBerry JDE plugin for Eclpise 1.0.0.67

  Blackberry JDE 4.2.1.17 component package

  Blackberry JDE 4.3.0.16 component package

  Blackberry JDE 4.5.0.16 component package

  Blackberry JDE 4.6.1.27 component package

  Blackberry JDE 4.7.0.46 component package

  WIndow XP SP 3

  How about using HTTP to GET the XML of your server at startup?

• Can someone help me? I am trying to download iMovie which normally should be free with other Apple applications, but for full reason he always says that I have to pay for it. And I Shen a brand-new iPhone updated to IOS 9 5s. Can someone give me advice on

  Can someone help me? I am trying to download iMovie which normally should be free with other Apple applications, but for full reason he always says that I have to pay for it. And I Shen a brand-new iPhone updated to IOS 9 5s. Can someone give me advice on what to do?

  iMovie and iLife and iworks Apps are free with the purchase of a new device.

  Since Apple is no longer selling the iPhone 5 s, she cannot be considered more for free apps.

  However, just to be safe, disconnect you from the iTunes and App Stores-> Apple ID in the settings on the new iPhone 5 s, then reset the iPhone in now the home and power buttons together for 10 to 15 seconds. Let the iPhone reboot and then sign in with your Apple ID in iTunes and the App Store and try to get the Apps again.

• 2 application tries to communicate with BES

  Hello, I am trying to get the ECL 2 times courable Demo on my device. I copied the demo (time for the device and the server too) and only changed the port.

  There are now in ListenerThreads, which are both on the 8080 a server there is a second port at the server level and there is 1 data base with 915 and 1 with 911. And the device also 1 915 and 1 with 911 is.

  With 2 port, I mean.

  URL url = new URL ("http", "localhost",8080, "/ push?") ("DESTINATION = 2100000F &PORT = 915& REQUESTURI = / ');

  the destination is here as an example.

  and the listening thread has this code.

  (StreamConnectionNotifier) Connector.Open(http://:915);

  And that come the other code to extract the data.

  Now my problem if I have 1 single application on the program on the device can I get both drives to this program. And if I have two programs on the device, can I get both drives to only 1 program. It's as if the listener does not resemble the second track, which he is bound to hear.

  Can someone help me please?

  MfG Jagge

  I solved the problem!

  It was because I copied the project in the Notes. There were then 2 classes named DominoPusher. And I think that if the Notes uses a class he registers the class and if another program is using the same classname, it uses the same class and not the class of the project.

  But thx for the other tips

  MfG Jagge

• Hello, im a student in England, student of architecture. I have the pack student for 12 months and I really need to know my limits with the use, (copyright licensing). I am allowed, except by using my home application to show works that i already have)

  Hello, im a student in England, student of architecture. I have the pack student for 12 months and I really need to know my limits with the use, (copyright licensing). I am allowed, except by using my home application to show works which I have already done (as portfolios) to architectural firms, I intend to request a placement to? also can I post my stuff (already did the work) on my blog or tumblr? I intend not to use for profit/money at all well (if I was I wouldn't ask you this lol). Thank you.

  Hi,

  Please see Licensing FAQ: where can I find the terms of membership and the terms of use?

  Hope that helps!

  Kind regards

  Sheena

• Buy two planes? Photographic for 9.99 and 19.99 Indesign at the same time? It s less expensive than 49.99 with applications and I only need this two software

  Buy two planes? Photographic for 9.99 and 19.99 Indesign at the same time? It s less expensive than 49.99 with applications and I only need this two software

  Hello

  Yes, you can buy the plan of photography as well as one app In-design under the same account.

  Please check the link for purchase https://creative.adobe.com/plans

  Please go through the Adobe - General conditions of subscription as well.

  Hope this helps!