Disabled but MultiCam clip the original always support here

Similar Questions

• Possible bug - video frames are jumping all over the exported sequence, but not on the original

  Hi all

  I recently used first todo some basic video editing.

  When I released the final movie executives seem to jump around and it seems really dodgy.  See the example below and you'll see what I mean

  • The original for this clip source file plays very well (without any image jump) in all playes video, including the first one.
  • I tried to get out about each different type of available video format, but executives still jump
  • I use Premiere CS4 and the original video was recorded on a Samsung camcorder, which uses the codec of samsung SOUSOU.

  We never seen anything like this before?  I tried to play round with different settings, but still can't seem to get rid of the image jerky.

  Any help would be grately appreciated.

  Thank you

  Simon

  Convert this hardware Samsung to something editable RA, as MS DV AVI type2 before use, or use an application to Samsung.

• I want to change my username and password but I saved the original ones and now forxfire let me use the new. How possibly my old password and usnername

  I went to a site that I use a lot and when I put my username and password foxfire asked me if I wanted to save them on my computer. I said yes. I had to change the user name and password for the site and now foxfire will not let me connect on htat site because there the old information. When I type in the new user name and password in the windows the conputer change my user name to the original one. I have to go to internet explore and go to the site, that I would like to connect. How I can erese the my "old" so I can continue to use foxfire.
  BEcky 435-224-4932 or 435-884-0193

  You can view and delete any individual or all the passwords by using

  • (Firefox 3.6 or menu bar) Tools-> Options. Security - passwords
  • (Firefox 4 as above press Alt first, or) Forefox button-> Options...

  For a full explanation see Password Manager - don't forget, delete, modify and import passwords saved in Firefox

• How to disable automatic replication of the original images

  I really need help on how to disable the automatic original photos copy.  I have thousands of duplicates and have hours of spents on topics help and Web sites and cannot find this option.  I'm extremely frustrated because this should be simple. If you, please, anyone can help me or tell me where to find this feature.  I already went through the tools and options, and he's not here.

  I really need help on how to disable the automatic original photos copy.  I have thousands of duplicates and have hours of spents on topics help and Web sites and cannot find this option.  I'm extremely frustrated because this should be simple. If you, please, anyone can help me or tell me where to find this feature.  I already went through the tools and options, and he's not here.

  ==================================
  I was wondering... copies have similar filenames
  TO...        Copy of xxxxxxx. JPG

  If_Yes_copies of this type are normally created when
  you select several files and accidentally drag the
  group selected when you release the mouse button.

  As an experiment, you can reproduce the unwanted
  copy with the following steps:

  Hold down your CTRL key and select multiple files...

  Place your pointer over the selected group
  (holding the key ctrl) and left click / drag
  the group even just the slightest bit... now
  release the mouse button.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• a default optional region is disabled, but appears on the model.

  Im making a site from a template. I put a link to an additional CSS file as an optional region. When on the pages where I need the normal CSS substitute I access the properties of model and it lights, but the default is to make it off.
  
  The problem is that even if the optional region is disabled by default, it seems to be on the template page. Is there a way to change this? Its important among the divs in the extra CSS have been set to display none, so I can't edit them!
  Thank you

  Use a design-TIME style sheet, or change in Code view.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "jdldn" wrote in message
  News:gdv0co$T1R$1@forums. Macromedia.com...
  > Im making a site from a template. I put a link to an additional CSS file
  > as a
  > optional region. When the pages where I need the normal CSS replaced I'll
  > to
  > the properties of model and it lights up, but the default is to make it
  > power off.
  >
  > The problem is that even if the optional region is disabled by default, it
  > seems to be on the template page. Is there a way to change this?
  > Its
  > important among the divs in the additional CSS have been
  > Display
  > zero, so I can't edit them!
  > Thank you
  >

• How can I get Firefox to open a link in a new window and keep the original open behind her window?

  That's all

  GoTo (Orange button) Firefox / Firefox Bar Menu-> Options/Tools-> Options-> tabs-> check the "when I open a link in a new tab switch him immediately"

• About the origin/Edge configuration

  Hello, I'm quite new to Adobe Flash Media Server and have been reading administration guide.

  After reading the information of origin/edge here:

  leader = 00000130.html & http://livedocs.adobe.com/fms/2/docs/wwhelp/wwhimpl/common/html/wwhelp.htm?context=LiveDoc s_Parts

  I came across a few questions.

  1. it is said that edge server essentially act as a "proxy" gets all inbound connections, which redirects them to the originating server.

  But I read here:

  leader = 00000130.html & http://livedocs.adobe.com/fms/2/docs/wwhelp/wwhimpl/common/html/wwhelp.htm?context=LiveDoc s_Parts

  that basically just edge transport server uses 1 connection initially and ordered that all users who connect. I am an old user of shoutcast/icecast, and this terminology is a little different. Origin/Edge configuration is basically correct relay? An edge transport server relays a stream from the origin server, and ordered everyone still correct?

  So I might have a relatively low origin server and low bandwidth and have 3 edge server to connect to the origin and have about 100 users to connect to each server 3 edge?

  2. This is the question that that concern me the most. Currently I have swf and HTML field restriction to my application on the original server. If I set up an edge transport server it will respect safety (html and swf domain restrictions) set to the correct home server? Or should I re-enter the areas these 2 files on the edge transport server?

  3. when I completely setup my origin/edge servers, will still be able to connect to the origin? Or they will have access on board?

  4. is there a way to limit the number of users connected to a server and after that it caps out, every future connection is then sent to another edge transport server?

  We hope to hear for you guys.

  Thank you!

  It is not that we do not know, is that we have not gotten here yet.

  1. edge/origin does many things.  It is a complete solution or a simple approximation.  Edge tries to take as much load to the server of origin as possible, therefore he handles VOD delivery locally if the media is cached, distributes broadcasts by pulling only once, but redisting, and it multiplexes all incoming connections on the edge more than one (actually two, but that's a minor detail) to the origin by the remote application conveyed. Origin must manage all scripts, is the authority on the content and registration or the Summit meeting point in direct topologies.  If you have a low origin?  Probably not because he is will again fill media content, especially at the beginning, when the caches are empty, constly.  If you run the script, happens to process the script for all customers, including those on the edges, so that can be costly - should be a great machine?  probably not - when caches work correctly, you should see limited on the origin, etc. support.

  2 edge transport server has its own independent area restrictions.  They are not provided to original aboard.  Allows you to create an origin configuration where it accepts that the edges or other machines in your domain and you can target other areas by the edge transport server.  So, if you want them all in honor of these settings, you'll want to change it on all configurations.

  3. an origin server can always handle direct traffic with or without subscription the edges.  I'll make sure that you are up-to-date with the latest version of FMS, especially 3.5.3 when it comes out that we have fixed some bugs in our DVR implementation in this area.  Nothing catastrophic, just want to ensure that you have the version that works best and we are considered correction of problems loading strongly edge based both local basic traffic (especially in a network of 3 level or more, but you're not here)

  4. you can write like this logic in an access adapter - actually it is exactly what it is designed for.  There the number of connections - for the server and the command of redirection at your disposal so write some logic there please.

  ASA

• no update of the original XP disc, did a re install, what now

  I have an old computer that didn't have bugs so I reinstalled windows XP, but it was the original XP no MS or updates at all. The computer does not recognize he's addicted to the internet. I need to update.

  Thank you

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28 (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

• Motherboard went out on my computer and I have the original OS from computer disks.

  My motherboard of the computer came out on me, but I have the original OS disk, with which he came (and the serial key). If I install this new motherboard, I'll be able to use my original OS drive? Can I disable it the old mobo so I can use this new? Can I download a trial version of Windows and activate it with my serial key?

  If you have a version of OEM Windows XP product key does not work on the new motherboard as the OEM versions are linked to the 1st computer/motherboard on which it is installed.

  For a 'Full' version of XP, you should have no problem with the exception possibly activate by phone.

  You do not disable a motherboard, simply remove the old disk XP if you plan to use a new hard drive.

  There is no trial version of XP.

  J W Stuart: http://www.pagestart.com

• Satellite T130-11U: where can I get the original box?

  Hello
  I have a Satellite T130-11u, but I lost the original box. Where can I get another?
  Thanks for your reply.

  Juju

  Hello

  > have a Satellite T130-11u, but I lost the original box
  What do you mean exactly by the original box?

  Do you mean the package / box provided with the laptop?

  Don t think you can get it from Toshiba ASP but if it's possible, get in touch with ASP in your country and ask the guy if you can get a

• SE error message: "the registry cannot load the hive (file) \systemroot\system32\config\software"when try to start on the original copy of Windows XP. "

  Original title: you're smarter then me. Help, please

  My windows xP home edition has crashed on my HP Pavilion a620n. Initially, I was able to get by using the original cd of the publishing house. Then it crashed again. Rebooted and pressed F8 and typed in my administrator id. This time, a cam of the screen saying that it was an ID of invaled. Re-checkeded my Id and it was OK. Put in my cd original and installed on a different partition. Problem is that I forgot to do a dual boot. Now I have two sessions of windows xp on the same partition. Am able to switch between them, but really need the original. When I click on the origianl happens with the registry cannot load the hive (file) \systemroot\system32\config\software.

  Is it possible to fix this?

  Thanks, it was a great help

• Relocation of the original system

  Hi, I have a TouchSmart 600-1040uk purchased directly from the manufacturer in the Czech Republic. So far so good. Unfortunately, my roommate has installed a Czech version of Win7 on this computer without telling me and create the first recovery disks, and later, I even found this new copy of system was illegal.

  So I desperately wants to recover the original system installed at the factory, as I'm not a pirate. But how? The original Image is free, but there is no HP Recovery Manager is available to perform the system recovery. Microsoft System Restore tool does not work with the recovery image (shows empty folder). British partner of HP will not send the recovery disc in Czech Republic, where I live. The manufacturer is no longer a copy of the image and does not really things HP more.

  Can you help me, please?

  First of all the question.  Assuming that the operating system is Windows 7 or Vista, how do you know that the OS installed is illegal?

  If the Czech version of install Win7 still work OK but must still destroyed, look here:

  http://www.ehow.com/how_5643882_restore-recovery-partition-boot-problem.html

  I know what the title says, but the instructions should also work with Windows 7.

• How to get the original item_property after have changed at runtime

  Hello
  
  for example:
  
  in my form there is an ITEM_A defined with VISUAL_ATTRIBUTE = "ABCD_RED".
  
  while executing, this property turns into "XYZ_GREEN".
  
  Set_Item_Property ('BLOCK_A.ITEM_A', VISUAL_ATTRIBUTE, 'XYZ_GREEN');
  
  Now I can read this property of Get_Item_Property - (real function, it is "XYZ_GREEN")
  But what about the origin of property "ABCD_RED".
  
  Is it possible to get the origin of property on a direct question to my form
  without saving it initially in time?
  
  Thank you
  Norbert

  You can save it in a variable before editing or you can reset the property to the original value that was set at design time.

  SET_ITEM_PROPERTY('my_item', VISUAL_ATTRIBUTE, '');
  

  Just use two single quotes without space between them "and the property will be reset to what it was at design time.

  Tony

• Problem with maintaining the original text of basiceditfield even on unfocus after typing the text.

  I have a Basiceditfield with the original text. Here is the code:

  searchField = new EditField ("","", 1024, EditField.FILTER_DEFAULT | ") EditField.NO_NEWLINE)
  {
  protected void onFocus (int direction)
  {
  setLabel("");
  This.Invalidate ();
  };
  protected void onUnfocus()
  {
  setLabel ("Search");
  This.Invalidate ();
  };
  };
  searchField.setLabel ("Search");

  Text initially searchfield is "search". Onfocus his game to «» I type something in the searchfield, assumes that "ab". When the focus is removed from searchfield label has the value "Searchab". while I want to as "search". Help, please.

  on the focus, use getText, check if it is 'Search', setText to «»
  about onfocus, use getText, check whether it is "", set it to "search".
  on keyChar, use getText, check if "search, use setText for" ", and then return super.»

• iMovie clips are original media events library after the update v10 and visible events in iMovie, but clips do not appear in iMovie

  I've updated to iMovie 10.  He created a new library.  When you use Show Package Contents, I see events and clips are original media.  When I opened the app, I see the events, but there are clips 0 indicated in each event.  How to recognize the clips?

  Hi there Jeffkant,

  Looks like you have imported content in your new iMovie library, but there is no actual clips showing events you have in your library. I thought there might be a problem with the new library, or something could have damaged the library when the import was made, so I would like to start by creating a new library, once again the disk inside your movies folder:

  iMovie (2013): work with multiple libraries

  If the problem persists with the new library, then I create a new user admin on your computer and see if you can reproduce the problem there.

  OS X El Capitan: set up users on your Mac.

  Let me know how it goes, so we can see what to do next. Thank you for using communities of support from Apple!