Relocation of the original system

Similar Questions

• Restore complete PC - either does not start or before restoration, said "the disk is defined as active in the BIOS is too small to recover the original system drive."

  I am trying to restore an image backup Vista 64 is 428 GB, the drive under restoration is a Velociraptor 2x300GB RAID 0 (about 558 GB under Windows), and the drive on which the image originated was is labeled as a 750 GB drive (actually about 698 GB / 433 GB used). When I first made the attempt I got some message on the target drive, have to be cleaned by diskpart, so I did. After that, I was able to complete the restoration - but after the restoration, at startup, I get the message:

  "Reboot and select proper boot device or insert boot media in selected bootable media and press a key.

  And under Windows, the drive does not appear. Disk Management displays the disk as unallocated space. So I added a new Simple Volume and then tried the new restoration. But now I get the message:

  "The drive is set as enabled in the BIOS is too small to recover the original system drive."

  Even if the restore completed successfully after cleaning, the drive is empty, and the player has more than 100 GB more space than the size of the image. After the restoration after the own, why can't it detect the boot sector; and if I try to restore after formatting, why do we say that the disc is too small? How can I successfully restore?

  Hello

  We can see the suggestion of Ryun on the link below and check if this helps solve the problem.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/9a968d83-Ca5a-4a71-85e2-a013d209c713

  See also:

  http://TechNet.Microsoft.com/en-us/library/cc754015 (WS.10) .aspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lost the original system of Windows 7 on my Satellite L650

  Hi all
  I lost my original Windows 7 system after I installed Scientific Linux 6.

  I created the space for SL6 by reducing my C drive (which, in itself, creates no problems,
  I went with Windows a few weeks after the shrink works normally) and
  Finally, I tried to install SL6.

  SL6 installation realized I had Windows 7 and installed the bootloader "grub".
  with 2 options start. But the option of W7 does not work! He said "bootmgr not found."
  And Toshiba (F8 at startup) recovery option does nothing.

  I think that what lay SL6 average, is the hidden Toshiba recovery partition, I am confident
  that the Windows partition has not (yet!) was affected. Is there a way to recovery ONLY the
  initial boot sector and hidden partition?

  I bought the Toshiba recovery disks, hoping to find in them a tool to do it all.
  But no, I can't make a completely new installation, which will erase all my stuff.

  Does anyone know a way to do this? Thank you!

  Recovery image installation does not work on the way you think it should work. You cannot use disk image installation HARD recovery (F8) more now after changing the HARD drive partitions.
  One way to put your laptop to factory settings is the use of the recovery disc.
  You are right. This disc using everything will be removed and laptop will be set to the original state as for the first day after the purchase.
  > Is there a way to recovery ONLY the original boot sector and the hidden partition?
  N ° something like this is not possible.

• Re: Satellite A300-1MC: recovery would restore to the original system?

  The story so far...

  Laptop failed (A300-1MC)

  No available recovery disk
  Replaced HARD drive
  Installed Vista using the borrowed from the previous model of Toshiba Satellite recovery disk
  Installed the missing drivers-online work system without valid product key
  Connected the old HARD drive using the box external usb
  Launched original TRORDCLauncher on the old disk - no error

  So now, I apparently have 2 recovery DVDs.

  Question: Will these DVD restore to original system?

  The previous Satellite was no TRORDCLauncher and come included with recovery disks

  I am aware of the correct procedure-online recovery disks in order to https://backupmedia.toshiba.eu

  > So now apparently I 2 recovery DVDs.

  Recovery disk would still set the laptop in the same condition as at the first day of purchase

• Free update of the Original system from Windows XP to Windows 7 operating

  I use an original version of Windows Xp and I have 1 GB of Ram and 1.8 GHz Pentium 4 processor, now is it possible to upgrade my computer to windows 7 for free? If Yes! How it should be done?

  I use an original version of Windows Xp and I have 1 GB of Ram and 1.8 GHz Pentium 4 processor, now is it possible to upgrade my computer to windows 7 for free? If Yes! How it should be done?

  Hello

  There is no free updates for all Windows XP operating systems.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@

  Depends on hardware configuration required on later operating systems, and also find out if the manufacturer of the laptop computer is supported and provides drivers for operating systems later as to whether it is possible or feasible to upgrade or not.

  There is no update free from XP to Vista, 7, 8.1, or 10.

  Forget Vista as support extended for Vista SP2 will end April 2017.

  Follow these steps before you buy Windows 7; Windows 7 SP1 to support extended to January 14, 2020.

  Microsoft sells more than 7; Try Amazon.com.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  @@@@@@@@@@@@@@@@@@@@@@@@

  Follow these steps before buying and upgrading (new installation) of Windows 8.1; extended support ends on January 10, 2023.

  Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.

  If this is not available, Windows 8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

  "Update to Windows 8.1: FAQ".

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  @@@@@@@@@@@@@@@@@@@@@@@

  How to buy Windows 10; extended support ends 14 October 2025:

  http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  " System requirements Windows 10"

  https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• How to move the original system to the SSD newly installed without an optical drive?

  I want to buy a W530 and spare SSD upgrade.

  I want to order one without a DVD player.

  How to move the system of origin, drivers and other software for the SSD newly installed without an optical drive?

  Hope someone could help me. Thank you.

  The two utilities that I mentioned manage alignment automatically. Also, I photographed my hard drive, then restored the SSD. I have no clone, which means a direct copy of the HDD to the SSD.

  I just went through this myself in July, using Acronis True Image 2012 to get my existing on my 256 GB SSD mSATA HARD disk image. It worked like a charm. I checked that the SSD has been properly aligned.

  See:

  Migrate to SSD

  and:

  Check the alignment of SSD

  Now stop worrying!

• Satellite L 40 Vista Premium - cannot read the original system restore disk

  My satellite L40 was bought a year ago, and so far I never needed the system restore CD. But now I have a missing system file so I will try to re - install. But my computer will not read the CD, if I insert it before starting my computer or windows Vista.
  Is there a way I can download the CD to restore the system on the Internet?

  Hello

  No you can't download because that would hurt microsoft license stuff. I recommend you ask a partner in your country for replacement, if your machine is still under warranty.

  Please go here and find the service provider nearest to them for help.

  Welcome them

• backup of the old system changed the type of operating system installation

  After backup all data to your desktop at home and move the backup file on the replacement computer that was running and had been activated, got backup and ran into problems.  The original pc was an OEM system with a valid OEM key and had been activated for years.  The new system is a renewed system which has an apparently valid cd and COA 'For refurbished computers' active fine and had been restarted several times after activation before the fiasco of the backup.

  After that I ran the backup recovery, system was restarted as planned, but when the time came to connect to windows, we encountered a problem of activation.  He said that the system should be activated.  I went ahead and put in the key that is attached to the system (the key for PC) refurbished, but he would go through.  I checked that I read the key from the sticker correctly several times and by two other people.  He would not suffer.  Just on a chance that the backup of the old system caused a little problem, I tried the OEM key that was on the original system.  He's been through.

  If the old system should simply be scrapped, I don't think anything, but it will be either made to disadvantaged youth, so I want to make sure that everything is always good about it and it is all above board.  In its current form of the key is now on two different systems.  What can I do to fix this?

  Hello

  I suggest you to download the tool to update product key on your system and then update the product key and check. Follow the steps mentioned in the article below.

  Update your Windows product key

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/product-key?displaylang=en

  If this does not help, then I suggest you to activate by phone and check.

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer laptop dv6 Pavilian: I need the original operating system for a Pavilian model dv6 dv6 1355dx

  I have upgraded to windows 10 and did not like it and tp attempt to restore the computer and accidentally erased my original windows 7. I then bought and installed windows 7 64 bit and the computer does not work properly; I need now the drive of 32-bit windows 7 original.

  Gurk

  Hello;
  
  Let me welcome you on the HP forums!
  
  I wish I had some good news for you, but I did not...

  Ordinarily, I advise to use HP recovery media to restore your PC to its original state. That would erase the entire disk, format the drive and install the operating system, drivers and utilities HP.
  
  Unfortunately, there is no support of HP recovery related to HP for your PC Product Page. This means that the stock HP is no longer the recovery media for your PC. They store any long recovery media for older PCs.
  
  Given that HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck

• 1905 - S277: cannot restore the original default system

  I have a Toshiba laptop model 1905-S 277. Recently, I m having a problem reinstalling my system with reinstall the CD after I insert my first CD, he starts to run, and after a few moments, it displays a massage with two options: (1) install application and (2) the default original system restore drivers install if I choose the 2nd option then it shows that the system will restart now. Please leave the CD in the drive up to this requested to remove WARNING: to start from the CD, please hold down the C key during restart System. After that, the computer restart and shows a massage: D:\ conexec.exe, windows\system32\ autoexec.nt C:\.
  The file is not suitable to the running MS-DOS and MS windows application. Click on close to terminate the application. It also shows the radio button (1) Close (2) ignore, but I can t choose one of them as hang up the computer.

  Please let me know if you have the slightest idea what to do.

  Hello

  As far as I know, this unit was designed for the American market.
  I m not 100% sure how the recovery procedure works on the American units but normally you should see 2 options; Standard recovery procedure and expert recovery procedure.

  It should be necessary only to boot from the recovery cd and choose one of two options.
  Well, I put t really know why you laptop hangs. Perhaps the formatting of the HARD drive can help, but this is only a suggestion.

• Restore the system to the original settings

  I'm trying to restore my computer to original settings to overcome a Trojan horse that has hijacked my Internet browser. When I use the restore option, it only allows me to come back in 3 months and then tells me that the parameters are then the same as today. How to restore original system checkpoint system - for when I bought the computer in March 2003? Thank you much for the help.

  Hello

  If your dining options offers more restore points, then there is no chance of working with this function.

  So if you want to retrieve the original settings, you must recover your system with the supplied restore CD.

  Good bye

• The question came on the resettlement of the original operating system on the computer. How do we go to this matter legally?

  Re-installation of the operating system on a computer

  I volunteer for a nonprofit that takes computers donated by the community and cleans them and provides them with under ideal children and homes for humanity in our local community.

  The question came on the resettlement of the original operating system on the computer.  How do we go to this matter legally?

  Start here: http://www.microsoft.com/refurbishedpcs/programs.htm

• OK to format the partition if not the start of the original drive SYSTEM more?

  I bought an SSD for my HP Pavilion dv7 and installed as boot drive primary, the upgrade with a new copy of Windows at the same time. I use the original drive in the second slot for data and formatted the original C: partition, but does support does not on the other 3 partitions. I wish I could use at least one primary partition for another OS or as a partition backup. If I want to leave the quiet recovery partition and be able to run the diagnostics, which means SYSTEM... Can the recovery tools if they are not on the boot drive? If so, I can take the SYSTEM partition (the SSD has the active boot partition).

  Hello

  Unless the Bios can access the partition HP_TOOLS at startup (which he won't be able to leave readers in the second span), you will lose the ability to run the extended diagnostics and the ability to have the bios flash run on reboot.  The bios will always be able to update, but the flash will run in the Windows environment that has more potential to cause problems.

  However, the HP_TOOLS partition can be created on a flash drive or you can simply create it on your SSD - see the document at the link below on this - This is for example and the included download may not be correct for your particular laptop, then you must get this information from your own product page.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-101396-1&CC=UK&DLC=en&LC=en&OS=4063&product=4315295&sw_lang=

  Kind regards

  DP - K

• recover the original bone broke my operating system recovery cd.

  I bought my laptop with original os(windows xp). But now my system is completely affected by the virus and broke my cd of restoration of the operating system. How can I get original os?

  Hi Renon,

  You will need to contact the manufacturer of your laptop (HP/DELL/ACER /...) and check with them to the cd.

  I hope this helps.

• "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "was my initial problem.

  "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "It's my original problem due to uninstallation of a Netgear usb internet device programthen a friend got their hands on it: now, put on it goes to safe mode selection screen. the result options of safe in many hyper scrolling mode that reads - multi (o) disc (o) partition (1) windowssystem32drivers\ ___sys... then stops & starts up etc when in last known good config that worked or start normally the icons of windows screen is displayed every thing seems as it should, then it turns a shade of blue just 1/2 a screen of white lettering & bam his judgment in a Flash. Cannot read this fast.      XP sp3 Toshiba Satellite P305

  Hi chygirl,

  You can follow the solution at the bottom of the link:-
  http://www.GeeksToGo.com/forum/topic/270656-cant-boot-up-after-unistall/