Disabling product after the replacement of the motherboard?

Similar Questions

• Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  Uhm... I think the issue here is a misunderstanding of what you watch.

  If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

  You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

  New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

  • \USERS\\Desktop\
  • \USERS\\Downloads\
  • \USERS\\Favorites\
  • \USERS\\Documents\
  • \USERS\\Music\
  • \USERS\\Pictures\
  • \USERS\\Videos\

  ... etc...

  Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

• After the motherboard was replaced, said revalidate Windows XP

  I did not have ALL the DISCS OF ORIGINAL INSTALLER and am frustrated full after all the work I put into trying to fix this machine... bought the new motherboard on ebay for 10 buck a new graphics card and replaced both the old motherboard was found to be the problem and trhe computer started and has ran for three days showing the above message... now three days are up and while I couldn't get online to validate the copy because of Internet problems, now I can't open the windows. He returned me I need to validate this copy... screen which shows nothing HELP... Please... very frustrated.

  * original title - as a hobby, I just replace a motherboard on an old processor 2003 I've had in my shop... Now that I have it working again, it gives me a message of: due to this computor signifigant material changes, you must revalidate your copy of windows. *

  "mmergatroy" wrote in message News: 3eb749aa-6433-47 d 7 - 91 d 3-42f5cea9d60d...

  I did not have ALL the DISCS OF ORIGINAL INSTALLER and am frustrated full after all the work I put into trying to fix this machine... bought the new motherboard on ebay for 10 buck a new graphics card and replaced both the old motherboard was found to be the problem and trhe computer started and has ran for three days showing the above message... now three days are up and while I couldn't get online to validate the copy because of Internet problems, now I can't open the windows. He returned me I need to validate this copy... screen which shows nothing HELP... Please... very frustrated.

  Your replacement of the motherboard invalidated the (probably) the OEM license with which the machine has been installed by the manufacturer.
  You can buy an OEM license or a new retail license – if you're very lucky, you can even get a legal. MS sells more XP licenses - the only sources are likely to be auction sites where more than 50% of the sold software is counterfeit, so make sure you check the seller completely!
   
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• After the motherboard replacement Tecra S2 does not start

  Hello

  I replaced the motherboard in my Tecra S2 and now it does not start, the power light is on but nothing on the screen. I can hear the h/d running DVD lights.
  I tried to remove the RAM.
  Also checked the CPU and still nothing.

  NEED HELP.

  Are you sure that the display is OK and correctly connected?
  Is busy, I mean drive HARD HDD LED flashes?

• problems with wireless after the motherboard, cpu and ram upgrade adapters

  As the title says, I have recently updated my card mother, cpu and ram (increased from Asrock extreme6 z77/i7 3770 k/Kingston 8 gb hyperx for EVGA ftw/i5 z97 4670 k/g. Skill ripjaw x 16 gb). I always use the same installation of Windows 7 64 via the same SSD. After I was installing new equipment, I used the disc that comes with the motherboard and installed all the drivers that were available (twice, just to be safe). All the features of the OS I had before seem to be there except to exit Device Manager to correctly install the drivers for my wireless (Linksys AE1000 and TP Link N900) adapters. I downloaded the current driver for the Linksys Web site and I have the disc for the TP-Link and I tried several times to install, but keep the same message ' Windows found driver software for your device, but has encountered an error trying to install it. Device Manager recognizes the device and it is not any question of State symbol (IE yellow triangle, etc.) that is displayed in conjunction with an adapter. I tried disable/re-enabling and uninstall/re-installing times and keep having the same problem. I tried to search in several forums of people with similar problems, but none of the resolutions seem to work or are suitable for my situation. Any help that can be provided would be greatly appreciated. Thank you.

  Hello

  When you upgrade your motherboard, cpu and ram, drivers for particular devices may not be related to other drivers. That's why I suggest you to install all the drivers for the chipset from the manufacturers website and see if that helps.

• USB mouse & keyboard disabled randomly after the Windows 7 login Panel

  Hi all

  Randomly, after the Windows 7 login Panel, windows disables my keyboard and USB mouse.

  -No problem in BIOS or on the login Panel, but once the credentials entered and valid, and reaching office, mouse and keyboard (USB) close

  -To solve the problem, I need to reboot several times, waiting for an instance where my devices are not closed (so it works without any pb until the next reboot)

  -J' have a backlit keyboard and when the problem occurs, light are turned market, as if it was turned on and turned off randomy

  Searching the Internet, seems, I'm not the only to encounter the problem, however single chip found Advisor on these was mentioning it is a bug in Microsoft Windows 7, associated with the management of the power supply of the USB ports. However the advice provided to change the config to disable these judgments do not work...

  Thanks in advance for your help and best regards

  Fabrice

  Have you tried to go to safe mode with networking Mode and update your USB drivers?

  You didn't say you had the problem goes mode without failure, so it might be a solution for you.

  USB drivers should be found at the web page of the manufacturer of your computer or your motherboard manufacturer's web page.

• Need a code product key for a change of hard drives. I need key product for the motherboard too?

  computer, I took the hard drive was an emachine with Windows XP home. I had another computer in a place away from giving old IBM computers with no working or deleted hard drives. I put the hard drive of the computer and now its wanting a product key code. I don't know where the original XP product key is for the moment. I do not know what is the product key for the motherboard because it was a used computer. If this does not work, what are my options for access to the info on my hard drive another way?

  The license for installing XP on an eMachines computer will be an OEM is restricted to use on this computer. It cannot be moved to an another computer/motherboard.

  If you want to make true on the new computer, first check and see if this computer has a COA OEM sticker on the case.

  If so, then you have use the product key update tool to change the key and then probably activate by phone.

  If this isn't the case, then your only hope is to see if you can find a reputable provider with stock of XP Home and purchase who then use the tool to update product key with the new key.

  http://www.Microsoft.com/genuine/selfhelp/PKUInstructions.aspx

• Windows 7 key invalid product after the re - install?

  I recently had to make a new re-install of Windows 7 Home Premium on my laptop using my USB and an iso I downloaded from Microsoft.  Everything was going great until yesterday when suddenly a box appears saying that my Windows could not be enabled because the key is not valid.  I used the product key that is located on the Windows sticker on the back of my laptop, so I know that it is legitimate and it seems rather strange that this would begin past 2 weeks after the new facility instead of immediately.  If anyone can shine a light on it, I'd appreciate it.

  Well, the errors disappeared, but you are still not activated, try the activation of the phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Possbile to use products after the cancellation of the subscription?

  Is it possible to use adobe products, when I subscribe to a monthly payment and cancel it after the first payment?

  Like the model subscription Unreal Engine 4? I agree once and won't get any frequently updates the latest version, but can still use the version I bought?

  Hi Razora,

  When we talk about creative cloud, it is annual or monthly founded subscripotion. As long as you pay, your creative cloud continues to work.

  But if you cancel the subscription, which means that your services ceased, and you stopped paying for your product.

  Subsequently, your product will be trun in TRIAL mode and if you have not used the TRIAL before, it will work for 30 days and then it will stop working eventually.

  P.S. If you use the adobe forums, please check useful/correct responses of staff or assistance, if there is.

  Concerning

  Ludo has

• Why I can't download the product after the trial version worked?

  Adobe trial went determined to buy per year. Have not been able to download products after purchase. What is going on???

  Hi Alacritous1,

  Welcome to the community!

  Do you still have trial versions installed, if yes, then go ahead and open any product and connect / enter the serial number to activate.

  If you purchased Creative cloud then download cloud creative app here: https://creative.adobe.com/products/creative-cloud and open to see the installed products and you can also download all products listed there.

  Thank you!

  Ankit

• The reactivation of the products after the wrong replacement of PC components

  I had a lightning damage to my motherboard and I need to replace & want to upgrade the processor as well. My computer is built at home, I bought the 3-seat version of Windows 7 upgrade and have used all 3. An is a a laptop that died, another on the desktop I'm about to have to repair. How can I use my upgrade having to buy another key? I'm afraid that my other office may have suffered damage as well, so I might have to do it twice. I have also the 3 - pack of Office Home 2010, same problem with having to reactivate.

  I had a non - OEM version of Windows XP on the computer before moving to Win 7.

  Then all you need to do is to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• pravilion g6-1379sa, AMD: find the product of the motherboard with the number on the sticker below the RAM cards

  Hey, I got the pavilion g6-1379sa amd e2-3ooom with apu radeon 6380g, chipset a60m.  the main Board if fried.  No start upward, white screen. a flash on the caps lock.  HP support blink County thingie said it is the CPU, but when I took it apart I saw a mounted PCB modual has burnt!  the sticker that keeps boards reference under ram cards isn't here for some reason any.

  HOW WILL I KNOW THE PART NUMBER?  or compatible motherboard?

  any help is appreciated.

  Ok thank you.

• / 3GB (from 4 GB) after the motherboard upgrade - how to get back my 1 GB?

  I recently updated my motherboard and my Vista Ultimate update now recognizes only (mode ala pre service pack) 3 GB instead of 4 GB that is installed.

  What can I do to recover my full 4 GB?

  Hi cheese Switzerland.

  If a computer has 4 gigabytes (GB) of memory installed RAM (RAM), system memory shown in the system dialog box information in Windows Vista is less than expect you.

  This behavior is the expected result of some hardware and software factors. Various devices in a typical computer require memory-mapped access. This is known as memory-mapped i/o (MMIO). For the MMIO space is available for 32-bit operating systems, the MMIO space must reside in the first 4 GB of address space.

  Follow the instructions in the link below that may help you resolve the issue.
  System memory shown in the system information dialog box in Windows Vista is less than expected if the 4 GB of RAM is installed
  http://support.Microsoft.com/kb/929605/en-us

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Activation of the products after the hard disk Crash

  I had a hard drive crash and obviously could not turn off my adobe on this particular machine products.  How to activate adobe creative suite on my new drive hard macbook?

  Product: Master Collection CS6 MLP upgrade license

  Hello

  You just need to re - install and put in the serial number. It will be reactivated.

  ~ Jitendra

• VSA cluster host to have the motherboard replaced including integrated NIC. The traps?

  Hello

  One of the hosts of our cluster is to have the motherboard replaced on Monday. The fault is the idrac, the host is always more or less of work and remained in production until then

  I fear that the network interfaces integrated on MB are used for the VSA and HA clustering will be modified. What I have to do preparatory work with regard to this, or any config after swap before returning the system back into production after the swap?

  We have 5.1 VSA running on Esxi 5.5

  Thank you

  PIP.

  Ok

  VMware back advising me that as long as the replacement warranty is a Board of Directors of the specification the same then there is no problem and no post necessary config replacement.

  Edge arrived yesterday and everything worked beautifully after the swap. The only thing I had to do was to connect the ports I had put in place previously.

  Thank you