Disabling the onboard graphics for PC Compaq Presario PC SR5123WM

Similar Questions

• Multiple monitors: you install a video card in a Paviliion disable the onboard graphics

  I have a p6250t paviliion running windows 7 (CPU intel quad-core, 4 GB ram, 600 GB HDD) with integrated graphics and want to run two monitors.  If I install an integrated graphics card video card is automatically disabled, or I can use two ports that I would use a dual head video card?

  taichadow wrote:
  I have a p6250t paviliion running windows 7 (CPU intel quad-core, 4 GB ram, 600 GB HDD) with integrated graphics and want to run two monitors.  If I install an integrated graphics card video card is automatically disabled, or I can use two ports that I would use a dual head video card?

  When you install the video card, the embedded video is disabled.  You can use one or the other.  However, if you buy a video card with two ports, you can use two monitors.  You must make sure that the video card will work correctly 300W of power.  A card that requires 350W should run OK, because manufacturers tend to overstate the power requirements of their cards.

• How to disable the onboard graphics via bios on y410p

  my game crashes during playback. I looked for solutions for 3 months and found the solution.

  the solution is to turn off optimus on bios.

  but there is no option to say anything on the gpu.

  PS: I know how to get to the bios.

  
  

• How to disable the integrated graphics card? HP Pavilion a6400f

  I intend to install a new NVIDIA PCI-E x 16 video card, but my HP Pavilion a6400f comes with an Intel integrated graphics. I know that you need to disable the onboard graphics, but how? I checked the BIOS but couldn't find an option to turn it off. Any help?

  Message edited by soadfreak2005 on 01/16/2009 11:24

  You go to control panel, system maintenance, and then Device Manager. Scroll down and look for graphics cards, click the plus tab, click on the model of integrated graphics card you have. Then right click and a menu appears, select turn off and that's all. Then follow the instructions on your new graphics card. Good luck...

• Presario C506TU: Password need Bios for HP Compaq Presario C506TU

  I know the BIOS password for HP Compaq Presario C506TU laptop
  His shows the message like "system disabled [13674]."

  @Ponkanagaraj

  Enter zulquvm

  or

  cxgqu

  Kind regards

  DP - K

• the search for drivers for a compaq presario cq57-339wm pci

  I'm looking for drivers for a compaq presario cq57-339wm pci. I have no internet and were in section hp driver and can't find it. someone would be so kind as to send me to the right place.  Thanks in advance Lewis

  You are the very welcome.

  You need this driver for the controller of communication simple pci:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-101536-1&CC=US&DLC=en&LC=en&os=4063&Product=5111985&sw_lang=

• Where can I download free drivers for a Compaq Presario laptop

  Original title: Download drivers

  Do you know where to download free drivers for computer compaq presario laptop?

  Hello

  Check with Compaq Support, their drivers and documentation online and ask in their forums.
  Other good sources are the real manufacturers such as Intel, ATI, Nvidia, RealTek or that which
  is the manufacturer of the device OEM.

  Compaq - support, drivers and documentation online
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Forums
  http://h30434.www3.HP.com/PSG/|

  ==========================================

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - graphics card - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on set to update driver
  (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with
  their own software and drivers and all other main drivers that you have.

  Now in system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), then the manufacturer of the device
  site (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and)
  software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AS ADMIN - reset after each
  installation.

  Always check in the Device Manager - tab drivers version you install actually shows up.
  This is because some restore drivers before the most recent is installed (particularly that audio drivers) so
  install a driver - reboot - check that it is installed and try again if necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check manually
  by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Disable the integrated graphics card?

  Hello

  I have a Dell XPS 15 L502X. So I recently installed a game called Wolfenstein: The New Order. And everytime I start the game I get an error known on the web as "wglCreateContextAttribsARB failed".

  I know that the cause of the error is that the game keeps identifying my integrated graphics (Intel HD 3000) as the main graphics card so that I have a dedicated onboard graphics (Nvidia GeForce GT 540 M, 2 GB dedicated memory).

  The problem is that my integrated card only supports OpenGL 3.1 and below, although my GPU supports up to OpenGL 4.0. I know for a fact that this GPU is able to run the game and YES I already chose my GPU as the primary graphics card under manage 3D, the global settings settings AND parameters of the program specific AND even tried setting the PhysX Configuration as the GPU itself at unsuccessfully.

  I also tried to disable my Intel HD 3000 by Device Manager (couldn't turn it off via bios), but whenever I do so that turns off the display of my laptop. However, I have a TV that my laptop is connected via HDMI. If my laptop screen is transferred to my TV and I can not change/turn my laptop displays ONE unless I had to re - activate the integrated graphics card. Strange in my opinion!

  On the other side, I ran the game without the integrated graphics card (when), and the game runs very well! CLEARLY the GPU (GT 540 M) is able to run this game, although the game is not identify him. Instead only identify the integrated Intel HD Graphics 3000 card or identifies the onboard graphics as the main reason any!

  Need help please, I want to play the game on my laptop screen not on my TV... Also on a side question, is it possible to completely disable my integrated graphics (Intlel HD 3000) without losing my screen? If so, how?

  Thank you for your time.

  EDIT: I discovered that a similar problem, I used to have with another game (watch dog) on the demanding game run my video card to support DirectX 11 for the game (so it never ran), now works correctly when I turn off my integrated graphics card and use my TV as my main screen! EVEN IF my GT 540 M is to satisfy the minimum requirements for the game!

  You can switch between graphics cards - Intel low performance for graphic intensive application of navigation/less graphically and using nVidia graphics high-performance hungry applications in graphics resources like games.

  You can take a look on the link shows to switch between the graphics card Intel and discrete graphics (nVidia, in your case):

  http://www.YouTube.com/watch?v=DCh9Eob0mNY

• Which hard drive do I need for my compaq presario CQ60

  which hardd drive do I need for my Compaq Presario CQ60? And where would be a good place to try to get a quality for a lower price? Thanks advance.

  Hello

  The player at the link below is an example of one that would be great for your laptop computer, as long as it's the same capacity or larger than your current HARD drive.

  Hard drive 320 GB

  The procedure to replace the hard drive is detailed from Page 51 in your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• How can I disable the onboard sound in the BIOS on the Equium A200 PSAE2?

  I use an external Creative Sound Blaster sound card, but the recording level is very low and were advised by Creative to disable the onboard sound in the BIOS but there is no option to do this. Can anyone help?

  Do not post twice!
  Follow this
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=99828&

• How can I disable the onboard sound card in BIOS on the Equium A200

  I use an external Creative Sound Blaster sound card, but the recording level is very low and were advised by Creative to disable the onboard sound in the BIOS but there is no option to do this. Can anyone help?

  Hello

  You can not disable it in the BIOS.

  If you want to disable the sound card, you can do it in the Device Manager!

  see you soon

• Satellite Pro P - how to disable the hot keys for camera assistant?

  Is it possible, and how, to disable the shortcut keys for the camera wizard?

  The default keys interfere with shortcuts of Microsoft Office (Word) - for example Alt + F9 to show/hide codes field to turns on the properties of camera assistant, Alt + 10 screen settings of camera etc.

  I find this very frustrating.

  Hello

  Of course you can turn it off.
  You must remove the software from the camera in msconfig start up.

  So go to start-run-msconfig online online
  Go to the Startup tab and disable the camera software. Restart the computer laptop and that s all!

  Good bye

• Need to disable the service manager for down load adobe

  Need to disable the Service Manager for down load adobe

  Original title: program compatibility Application Applications App Apps GaGames Legacy Crash crashes hang hangs
  Moved from feedback
  Internet Explorer version unspecified - unspecified BONES

  Hello

  What Adobe program you are trying to download?

  Flash Player
  http://helpx.Adobe.com/Flash-Player/KB/installation-problems-Flash-Player-Windows.html

  Adobe Reader
  http://helpx.Adobe.com/Acrobat/KB/quick-fix-install-download-reader.html

  Don

• How to disable the Compatibility Mode for iTunes

  Title: programs original compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  How can I turm to i-tunes program compatibility mode?

  Hello

  1. what operating system do you work?

  I suggest you try the steps mentioned below and check if it helps.

  Method: Try to disable the Compatibility Mode for iTunes and check if this is useful:

  Visit the below link to do the same thing.

  http://support.Apple.com/kb/TS1489

  Hope this information helps you.

• How can I disable the Mappoint 2006 for the installation and the reactivation on new computer

  How can I disable the MapPoint 2006 for the installation and the reactivation on new computer

  This forum is for posting comments on the web site of Microsoft Answers, only not to ask questions of Mappoint.

  Mappoint forum is here: http://social.microsoft.com/Forums/en-US/streetsandtrips/threads