Multiple monitors: you install a video card in a Paviliion disable the onboard graphics

Similar Questions

• How to disable the integrated graphics card? HP Pavilion a6400f

  I intend to install a new NVIDIA PCI-E x 16 video card, but my HP Pavilion a6400f comes with an Intel integrated graphics. I know that you need to disable the onboard graphics, but how? I checked the BIOS but couldn't find an option to turn it off. Any help?

  Message edited by soadfreak2005 on 01/16/2009 11:24

  You go to control panel, system maintenance, and then Device Manager. Scroll down and look for graphics cards, click the plus tab, click on the model of integrated graphics card you have. Then right click and a menu appears, select turn off and that's all. Then follow the instructions on your new graphics card. Good luck...

• In my XP box, I installed 2 video card that has an output of 2 x 2. So now, I have 4 monitors with my single xp box. I want to join another 2 monitors to him. How can I do? Is it possible to attach?

  In my XP box, I installed 2 video card that has an output of 2 x 2. So now, I have 4 monitors with my single xp box. I want to join another 2 monitors to him. How can I do? Is it possible to attach?

  I want to join 6 screens with a single CPU.

  Hi DebBiswas,

  You can attach as much monitor you need, but it depends on the material if it supports or plug another video on the computer card.

  If you use SLI / Crossfire, the system must support more than 2 cards.

• After some time, my screen goes black have to re boot. It is only on I pc the other pc on the same monitor works okay my video card is on the card mother all ansawers would help t / you rkfjr

  After some time, my monitor goes black have to re start at 5 min to 2 h said mge device is grapish until this day.   It is only on I pc the other pc on the same monitor works okay my video card is on the card mother all ansawers would help t / you rkfjr XP HP pc 1.3 gh 512 ram 120g hd

  Assuming that the integrated graphics controller is OK, try the following:

  Launch a command (as a Runas administrator) window and enter the following commands in it:

  powercfg-h off

  powercfg/change-standby-timeout-ac 1440

  The first command turns off "Feature of putting into hibernation"

  The second command replaces the timeout stansby 24 hours when the system is connected to AC power.

  (The number is in minutes).

  Good luck.

• Install a video card GeForce nVidia on my desk of m7330n

  Dear community,

  First of all thank you if you help me . Finally, I have a HP Media Center PC m7330n with all the basic tricks included as 1 g RAM, windows XP, ATI Radeon X - 200 series Vid. Card. I really want to update my video card to play most of the games with some top quality a lot more then I can at the moment, I was looking at the nVidia GeForce 8400 GS graphics card, I got a free PCI - E x 16 available bus and my ocmputer is only a DDR, but the 8400 GS seems to say in his name GDDR2 , I'm a little confused as to if it will work on my PC, please visit the HP site its enc my PC specs: http://support.hp.com/us-en/document/c00587142

  I'd really appreicate if someone could brighten up this situation for me, if I can't add this card I am ready to buy a new motherboard, UCP and video card, but at a low expense, not Bank breaking. Thank you.

  PranavS, you are welcome.  I don't want to walk on the toes, but I'd be happy to review the specifications of any computer that you decide to buy.  It is better to ask questions before, that after you've already spent the money.  You can PM me anytime.  I'll be happy to help you.

• Cannot play bigfish games - your video card setting does not match the minimum system requirements: at least 2048 x 2048 DXT1 & dxt Texture size

  Original title: I have a computer toshiba M30 laptop and I'm on windows7. problem is that I can't play at bigfish games?

  HI the error I get is: your video card setting does not match the system minimum requirements:

  The size of the texture at least 2048 x 2048 DXT1 & dxt5 Texture formats support of the target.

  Thank you Joe

  Hey Joe,

  Thanks for the post.

  We need a few more details to help games play question, please answer the following questions.

  1. is this problem limited to Bigfish?

  2 do you have any problem with other games?

  You will need to install a graphics controller (video card) which can meet these minimum requirements.

  You can go through the following link; who helps update the graphics card, this could solve the problem.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also download and install the latest display driver by downloading from the website of the manufacturer of the computer.

  http://support.Toshiba.com/drivers

  I hope this helps.

• do you need to do something for PS5 to use the integrated graphics card memory

  I had a computer that had no memory of graphis and had made them very slow. So I installed a gtx 550ti of egva using the piece of vedia n m render time is the same Do I need to configure something in the PS5 to use memory or is it automatic? The video card has 2 GB of memory onboard.

  If it is a supported video card, it should be automatic.

• I have Adobe Acrobat 9 Standard on both of my computers.  Some time previously, one crashed my computer and I had to reinstall the operating system and all applications.  After you install Acrobat 9 special and differential treatment in the computer once,

  I have Adobe Acrobat 9 Standard on both of my computers.

  Some time previously, one crashed my computer and I had to reinstall the operating system and all applications.

  After you install Acrobat 9 special and differential treatment in the computer once, I wanted to update the update of the version 9.0.0 software to the same level as it was before the crash and that the other computer has version named 9.5.5.

  The update to version 9.0.0 system does not at all. 'There is no update' listed in the dialog box.

  Can you advise how to get my Adobo Acrobat 9 Standard (Version 9.0.0) could be updated to the same level it had before the accident.

  FTP://FTP.Adobe.com/pub/Adobe/Acrobat/Win/9.x/

• Disable the integrated graphics card?

  Hello

  I have a Dell XPS 15 L502X. So I recently installed a game called Wolfenstein: The New Order. And everytime I start the game I get an error known on the web as "wglCreateContextAttribsARB failed".

  I know that the cause of the error is that the game keeps identifying my integrated graphics (Intel HD 3000) as the main graphics card so that I have a dedicated onboard graphics (Nvidia GeForce GT 540 M, 2 GB dedicated memory).

  The problem is that my integrated card only supports OpenGL 3.1 and below, although my GPU supports up to OpenGL 4.0. I know for a fact that this GPU is able to run the game and YES I already chose my GPU as the primary graphics card under manage 3D, the global settings settings AND parameters of the program specific AND even tried setting the PhysX Configuration as the GPU itself at unsuccessfully.

  I also tried to disable my Intel HD 3000 by Device Manager (couldn't turn it off via bios), but whenever I do so that turns off the display of my laptop. However, I have a TV that my laptop is connected via HDMI. If my laptop screen is transferred to my TV and I can not change/turn my laptop displays ONE unless I had to re - activate the integrated graphics card. Strange in my opinion!

  On the other side, I ran the game without the integrated graphics card (when), and the game runs very well! CLEARLY the GPU (GT 540 M) is able to run this game, although the game is not identify him. Instead only identify the integrated Intel HD Graphics 3000 card or identifies the onboard graphics as the main reason any!

  Need help please, I want to play the game on my laptop screen not on my TV... Also on a side question, is it possible to completely disable my integrated graphics (Intlel HD 3000) without losing my screen? If so, how?

  Thank you for your time.

  EDIT: I discovered that a similar problem, I used to have with another game (watch dog) on the demanding game run my video card to support DirectX 11 for the game (so it never ran), now works correctly when I turn off my integrated graphics card and use my TV as my main screen! EVEN IF my GT 540 M is to satisfy the minimum requirements for the game!

  You can switch between graphics cards - Intel low performance for graphic intensive application of navigation/less graphically and using nVidia graphics high-performance hungry applications in graphics resources like games.

  You can take a look on the link shows to switch between the graphics card Intel and discrete graphics (nVidia, in your case):

  http://www.YouTube.com/watch?v=DCh9Eob0mNY

• How can I disable the integrated graphics card Intel so I can adapt the best graphics card Optiflex 270

  I have a FSFY27J that I under stand is a Dell optiflex 270.

  How can I disable the integrated graphics card Intel so I can adapt the best graphics card

  Thank you

  Walter

  Hi Walter-W,

  If your system is an OptiPlex gx270s you top AGP slot to set up a discrete video card. The integrated video card is automatically disabled when you connect the discrete video card.

• How can I disable the onboard sound card in BIOS on the Equium A200

  I use an external Creative Sound Blaster sound card, but the recording level is very low and were advised by Creative to disable the onboard sound in the BIOS but there is no option to do this. Can anyone help?

  Hello

  You can not disable it in the BIOS.

  If you want to disable the sound card, you can do it in the Device Manager!

  see you soon

• Three monitors with a single video card?

  Hey guys,.

  I have a user with a T430 possessing a video card Intel HD connected to a Mini Series 3 with 2 DVI connectors.

  She claims that it connected to his laptop to another docking with the same configuretion and she was able to work with 2 monitors connected to the docking station and its display LCD on the laptop, I tried the same thing with its current docking station and it will not recognize 2, the LCD on the laptop and 1 on the monitor connected to the docking station.

  I've never seen this work with just a video card, I saw him when he has a second video card in there, but once again, she claims, he worked on an another docking station (exactly the same thing from a work colleague) it is plugged.

  Any ideas?

  Thank you

  The T430 is able to support three LCD, if you use the 3 series with more mini docking station with 2 monitors connected via DVI or Displayport. The third monitor can be internal or external connected via the mini laptop own DP.

• Does not start after installing new video card

  Hello, I have a desktop H8-1284, and the video card went a few days ago. So I bought a video card Geforce GTX 650, and after installing the card and the computer starts, it hangs just at the start of the HP logo screen. So I put an old geforce 8800, and she starts without a problem. When I try the new card Geforce GTX 650, the same thing, just hangs at the splash screen.  I checked the bios and it doent seem to be something there that can help wouild. My diet is 460 w, and the new map needs of 400 w, any help will be greatly appreciated

  Hello

  Most of the cards PCI-E 3.0 are retro-compatible with the PCI-E 2.0 slots.  However, in order to get the PCI-E version 3, you must use a processor Ivy Bridge.  Look at these specificationsfor a typical NVIDIA GTX 650.

• installing a video card in p7-1010

  Hi, I have a new HP Pavilion p7-1010.  I am wanting to install a new video in card and want to make sure that I can.

  The video card I'm interested is an AMD Radeon HD 6950.

  I realized I have to install a new power supply too, correct?

  Hello

  Radeon 6950 video cards connect 10.2 "11.4" length.  You must open the PC and the measure to make sure that you have enough room.

  Yes, you will need a new power supply.  The Corsair CX600 apppreciate be a good choice.

  You need to open your PC and measure the physical dimensions of your diet.  Here is a list of the things to consider:

  1. Specifications
  2. Total power - important
  3. amperage 12 + v - important
  4. Modular - is not required, but I like the flexibility
  5. Warranty
  6. I7 and SLI ready
  7. Efficiency rating
  8. Cost
  9. The physical size - standard ATX PSU is 5.5 "by 5.9" by 3.4 "give or take a few tenths
  10. Only one + 12 volt rail is a better choice.

  www.Newegg.com has many choices of power supplies.  Corsair, OCZ, Rosewill, Thermaltake...

• Now 23-d044 - installed MXM video card - HP Envy screen flashes red green blue black

  Hello

  I'm a 23-d044 I wanted to do the update/install video card instead of using the integrated graphics card.  I tried two different cards, a nVidia GeForce GT 540 m 2 GB and a part of HP AMD card #707804-002.  In each case the applied heat sink was part HP #694456-001. In each case, whenever I go back to the PC and it works, the screen flashes red, green, blue, black, white to infinity. I have read these and other forums indicating that this is a fault with the GPU, but I find that is unlikely given that I tried two different cards. I thought that maybe the MXM connection on the motherboard, but on the original motherboard power connector was defective, I have since replaced the motherboard (about 2 weeks ago) with the same part number. I downloaded both the AMD and nVidia drivers the most recent for each card (while running the integrated graphics card), but not joy.  Anyone have any ideas?  Thanks in advance for the help!

  Sean

  Sean, I had the same problem too.  I finally thought to it.  Just above where the grafics card go is two connectors and one of them has a plug in there.  above the connectors, said uma_lvds, the other says MXM_LVDS.  Swap the power cord of the uma_lvds to the mxm_lvds.  This will fix the problem and you will be running.