Disc playback

Similar Questions

• HDCP issues OTP-S590 vidoe by STR-DH830 playback blu - ray disc playback. OK with dvd

  When I play a blu - ray disc BDP-S590 blu ray player through a STR-DH830 video whites there an HDCP problem. Is it possible to disable DHCP. It only happens when I play a blu - ray disc. When I play a DVD disc, there is no video cutting.

  Hello Gary,.
  Welcome to the community of Sony.

  Disable the [HDMI Deep Color output] in the BD drive and check if it helps.

  See the following link for possible troubleshooting steps.

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C567099

  If my post answered your question, please mark it as an "accepted Solution".

• Error-Windows won't load disc playback

  Monday my computer worked fine in the morning, and then I drove 5 hours back to school and when I tried to turn on the computer I got a disc «read error press Ctrl + alt + delete to restart»

  Today, I burned a copy of the disc on a Vista recovery cd and booted from there and ran a repair.

  I then also followed instructions from a forum here that says that OS was not when he ran the repair. Who cleared up the problem of disk error.

  However, now my computer still load windows. It retains a windows error recovery screen loading and I get the options to start in safe mode, normal, or last known working scene and I did all the people and they are trying to run and then the computer stops and restarts.

  I was wondering if anyone has any ideas, I'm running on the recovery disk again now to see if my operating system can be found.

  About 3 weeks ago, the hard drive that came with the computer crashed and we ordered a new one. It seems unlikely that the hard drive could fail in such a short period of time.

  I am running Windows Vista Home Premium 32 bit on my Dell Inspiron 1525.

  CHANGE 1217 CSE

  I am running the recovery disc and my screen is to System Recovery Options, and it always seems that my OS will be not registered.

  When I run windows in safe mode, it says LOADING of FILES of WINDOWS and he gets as much as

  \Windows\systems32\drivers\crcdisk.sys

  Hello

  The above error message indicates that it is not to find your operating system (Windows).
  This could be because the hard drive is physically wrong or because Windows is incredibly corrupt. Since you're not savvy computer, take the machine to a competent local computer technology.
  Do not use a type of BigComputerStore/GeekSquad of the place. Or if the machine is still under warranty, call the manufacturer's technical support.

  It will be useful.

• Tecra A10 - 1GW (PTSB1E) - update of the firmware & chipset failed

  Hello!

  in fact, I have two problems on my laptop (32-bit) windows 7:

  Burning programs do not find my burner (called 'MAT * a DVD-RAM UJ880AS' Device Manager) and even the [update of the firmware | http://de.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=DE&selCategory = 2 & selFamily = 5 & selSeries = 155 & selProduct = 809 & langua ge = 17 & selOS = 29 & selType = 50 & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = 12 & 1 7 = selectedLanguage & type = 50 & page = 1 & FROM = windows7 & ID = 68407 & DISO =-1 & driverLanguage = 42] cannot [find him | http://img705.imageshack.us/f/fehler2.png/]. Although the official web page of toshiba called mast * su * a, i belive it is the correct driver.

  Internal burning function Windows works _sometimes_ and disc playback as usual.

  Chipset driver updat doesn't work.
  The [error message: http://img827.imageshack.us/f/fehler1.png/] said 'requirements for the installation of this software is not met. the installation program is abandoned.
  I don't know, I chose the right driver.

  All attempts have been made under administrator rights and disabled antivirus.

  Thanks for help
  Tablerocker

  p.s.: the windows shortcut (just the shortcut!) + e works, too ([unknown error | http://img137.imageshack.us/f/fehler3.png/]). but I don't think it's a problem toshiba ;-)

  > Burning-programs do not find my burner (Device Manager named him "MAT * a DVD-RAM UJ880AS") and even the firmware does not find it. Although the official web page of toshiba called mast * su * a, i belive it is the correct driver.

  What is the status of the STRANGE in Device Manager?
  Are there any yellow exclamation marks?

  I recommend you remove/clear the STRANGE since the Device Manager.
  Then start the registry and delete the upper and lower registry key filters:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, restart the device. Windows should recognize the STRANGE again.

  Regarding the driver chipset;
  The A10 - 1GW supports the Chipset mobile Intel GM45 Express.
  http://www.Intel.com/products/Notebook/chipsets/GM45/GM45-overview.htm

  If you use the driver from the Intel page, then you should try installing the chipset in Device Manager. This allows to force Windows choose the driver Intel

• Satellite L650-12 q - recovery of Windows 7 does not work

  Hello

  I have Windows 7 Home Premium (64-bit) edition in my laptop Toshiba Satellite (L650-12 q) and after a new start the Windows stopped working. I have a recovery disk that does not load (I'm done with the pointer in a blank screen) and the drive to install windows 7 would not work either (same thing). Safe mode no longer works.

  This probably means that the partition has a problem I'm wrong? -J' used Ubuntu Live CD, which confirmed that c:\ cannot be mounted while d:\ can.

  The problem however is double: a) I'm not sure that aspect of my data is accessible or not (I can't check) and b) I can't reinstall Windows, as Windows 7 installation process does not work.

  Any ideas please on what to do next? I want to access the partition, have searched on the internet (even tried with a Windows 98/XP boot disk), but had no chance that the partition is written in a newer way, which is not detected by them...

  Thank you in advance.

  > I have a recovery disk that was not loaded (I'm done with the pointer in a blank screen)...
  Do you use it for the first time?

  In any case, try to start the recovery disk, follow these steps:
  -Launch the laptop model and when you see the Toshiba screen home press F12 repeatedly to enter the boot options
  -When the boot menu appears to place the recovery disc into the optical disc drive
  -in the menu choose the CD/DVD drive and press ENTER
  ODD must start recovery disc playback.

  What happens when you do this?

• Satellite A200 starts

  Hello

  I had Satellite A200 given to me will not post.
  Long warranty, but what I like to know what error or light mean because he try to post.

  I get two 2 blue lights on it, power and ms in.

  If remove the ram I get no beeps or anything.
  If do USB floppy and try the crisis on that disc search disc playback as it try re-flash bios?

  I think I got the same problem.

  I had to get it fixed, but it was on warranty... almost a week.
  They have changed motherboard with CPU and graphics card too...

• Blu - Ray will not play on Satellite P855-307

  Hello

  I recently bought this laptop but I can not play Blu - ray discs; Toshiba Blu - Ray disc playback software loads but does not recognize the drive. The player will play DVD/CD without any problems. The same problem happens with Nero Kwik Media software.

  Any ideas what is the problem?

  I tried running via integrated and graphics NVIDIA, but it made no difference.

  Have you tested with different Blu - ray discs?

• L50D-B satellite never burn a CD or a DVD properly

  Hello

  I own a laptop Toshiba Satellite L50D-B.

  The laptop is equipped with SU - one 208FB CDDVD TSST corp who works in any type of disc playback. The problem is he never burn a cd or DVD correctly.

  I have used all types of optical media nero 2015 software and 64-bit windows by default burning process 8.1.

  However whenever I receive an error message that my CD/DVD drive needs firmware upgrade.

  The result is that the optical disc shows burn marks, but it cannot be read by any optical device.
  Anyone have any idea on the issue?

  Thank you in advance...

  MODEL NAME: TSST corpCDDVD SU-208FB
  VERSION: TF01
  CODE OEM: TF

  Which application provides this message about the update of the firmware necessary?
  I looked on the page of the Toshiba UE driver and unfortunately, there is no updated firmware for this CD/DVD player.

  Theoretically, it could be a hardware problem with the internal CD/DVD drive instead of problem firmware also due to the fact that you are the first, which has posted this question here in the forum; I guess that there may be a hardware problem. But just my personal opinion

  However, the laptop was also preinstalled with the Toshiba Recovery Media Creator.
  This burning software works correctly?

• Sims 3 install error SetupNew.setup.cpp (140)

  I tried to install the Sims 3 on my computer and when I click on the automatic disc playback DVD player an error screen appears containing this:

  > SetupNew.setup.cpp (140)
  PAPP:
  PVENDOR:
  PGUID:
  $15.0.0.498
  @ Windows Vista Service Pack 1 (6001)
  IE Version 7.0.6001.18000

  What should I do to fix this?
  Thank you

  Hello Sparstons22

  Thank you for using the Microsoft answers Forum.

  Try first to search through the website of compatibility on the link below to make sure that the game is listed on the site as being fully compatible with Windows Vista.

  Windows Vista compatibility Web site

  http://www.Microsoft.com/Windows/compatibility/

  Second, you can try to install the game in Windows Vista compatibility mode since. This process can be accomplished by right clicking on the Setup file and select the Compatibility tab and select the operating system in the list and the options that you want applied to the installation, then press OK. You can then try the install againa and see what response you get.

  Let us know what you find out and if it works for you suggestions.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to play photos on the computer

  Original title: photo after loading disc playback

  After copying pictures on a disc, the computer refuses to play their return, tried differen't computer and haven't had no memoire.esolutionle on computer response is, no images to download map of memort, instead of this gives me an option to display, download, ect.

  Hi Rmsvceguy,

  1. what program did you use to burn the image to disk? What is DVD or CD?

  I suggest that you try to burn the disc using Windows Explorer and check if you are facing a similar question.

  Burn a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Should which CD or DVD format I use?

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  Also, make sure that you change the default program to view the images and the AutoPlay option.

  Change AutoPlay settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Performance monitoring

  In collaboration with Vista Ultimate with the latest service pack. Latency issues become deep after a few years of use.  Large number of files have been deleted but the problem persists... specifically to trading Web sites.  It has 2 gigabytes of memory, processor clocked at 2.66 Ghz,

  Performance Analyzer launched to include the disk read time, writing disk time and time processor.  Time processor is a 60 on a scale of 1 and is displayed in.   Disc write time is close to zero and disc playback time is not a show.  I would like to aim for this tool to help me identify the problem.

  Locally, there is no latency with the text in documents word or any window where the text can be placed.  Entering text on any Web site, input box is considerably delayed.  How can you identify what the problem is.  Car maintenance is assured and Antivirus/malware analyses are performed.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD players are bad.

  I changed the dvd and the dvd leave the disc playback

  laptop car bed. Does not read the disc. the dic.

  Have you thought to define if it is an IDE drive as master or slave?

• How to read the data written to the virtual disk

  I use the following VDDK function to read the Flash disk from VMware

  http://bigchainring.kicks-ass.NET/functions/VixDiskLib_Read.html

  But areas of complete disc playback, including empty spaces. I need to back up only the data written to the Flash disk. It is to save the backup disk space (for example if 126 instant KB is written in 40 GB of disk snapshot, then we read only 126 KB and not 40 GB drive). Please suggest the correct way to read the data written to the Flash disk as well as to reproduce the same virtual disk with the data.

  VMware vSphere API queryChangedDiskAreas() can be used to obtain the data blocks in the virtual disk.

  Steps to follow:

  1. get the beaches of block of data (numbers) using queryChangedDiskAreas() API with '*' as argument.

  2 read the data of the specific blocks by using VixDiskLib_Read()

  3. write to another drive using VixDiskLib_Write()

• Copy the files of ESXi 4 to ESXi 4 guests VERY SLOW with "FastSCP 3"?

  Hello

  I have two HP ML350 G5 servers with ESXi 4. now, I want to move some virtual machines in one ESXi host to another. This is a small test system.

  I found this program Veeam FastSCP which is a faster tool to copy files between ESXi servers, so I installed this tool on my client workstation and have begun to copy yesterday.

  But the transfer rate is of 14 MB/s, it will take & gt; 26 hours to complete my project (1 TB of data transfer). I am not satisfied with this speed, because ESXi, my client station servers and switch between the two network cards 1 GB...

  This speed is normal? Or have you of the best ways to do so?

  Firestartah is correct, that I just wanted to confirm and add direct links:

  Yes, it's transfer speed of 'normal' file for ESXi 3.5 or 4.0:

  Planned for FastSCP 3.0 speed

  File transfers are a few times faster with 'fat' ESX, but the latest versio of ESX 4.0 has a kind of service console disk read limitation described here:

  Disc playback slow speed on ESX4

• Media Player error: IWindows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  I copied a dvd on a USB from a friend, I can see from memory stick, but when I tried to copy it to my computer and read it, it says that iwindows Media Player can't read the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. Can someone help me please?

  Thank you

  I copied a dvd on a USB from a friend, I can see from memory stick, but when I tried to copy it to my computer and read it, it says that iwindows Media Player can't read the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. Can someone help me please?

  Thank you

  =========================================================
  Best bet would be to download and install the free software
  VLC media player... it should play the video without the
  you need to change the region code.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.6 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.6 - win64.exe)